Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

COMPLETE TECHNICAL SERVICE INC

UEI: KBGKGHWZS2K9

COMPLETE TECHNICAL SERVICE INC is a federal contractor, registered under UEI KBGKGHWZS2K9. It has been awarded $1,175,230 across 8 federal contracts. Primary work spans Unknown NAICS, Electrical Contractors and Other Wiring Installation Contractors, and Poured Concrete Foundation and Structure Contractors. Top awarding agencies include Department Of Defense and Department Of Homeland Security.

Contact Information

Registration and classification details

Registration

UEI Code

KBGKGHWZS2K9

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Department Of Defense$643.1K54.7%

Department Of Homeland Security$532.1K45.3%

Awards by NAICS

- Unknown NAICS$486.6K41.4%

238210 - Electrical Contractors and Other Wiring Installation Contractors$340.8K29%

238110 - Poured Concrete Foundation and Structure Contractors$191.4K16.3%

237110 - Water and Sewer Line and Related Structures Construction$156.4K13.3%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in COMPLETE TECHNICAL SERVICE INC's top NAICS codes and agencies

Concrete Forming and Placement

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and Wiring Services

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement involves the full scope of activities related to forming, reinforcing, pouring, and finishing both structural and architectural concrete elements for a project under the Nuclear Reactor Program within the Department of Defense. It is issued as a subcontract with a Total Small Business Set-Aside designation, meaning only small businesses as defined by the Small Business Administration are eligible to respond. The North American Industry Classification System code 238110 applies, indicating a classification within the concrete work specialty trade. Performance of the work is required at a site in San Diego, California, with a zip code of 92136-3581. The solicitation was posted on August 5, 2026, and responses must be submitted by August 14, 2026, with no point of contact specified. The opportunity is accessible through the DIBBS platform via a public link for interested contractors.

NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract under a Total Small Business Set-Aside, designated for firms certified as small businesses by the SBA, and falls under NAICS code 238210 for electrical contracting. It requires the installation of comprehensive electrical systems including wiring, conduits, panels, and lighting fixtures for commercial or infrastructure projects within the Department of Defense’s Nuclear Reactor Program. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, and the work must be performed at a specified location in San Diego, California, with a zip code of 92136-3581. All eligible small business contractors must submit proposals by the deadline to be considered for award, with performance focused on meeting the technical and safety standards required for defense-related electrical infrastructure.

NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement specifies the requirement for forming, reinforcing, and pouring concrete to construct foundations, slabs, walls, and other structural elements at Cherry Point, North Carolina, with a zip code of 28533-0021. This is a subcontract under the NAICS code 238110, which corresponds to concrete work, and is solicited by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, indicating a brief window for interested parties to submit proposals. The place of performance is clearly defined, and while no point of contact or set-aside details are provided, the scope of work centers on essential structural concrete operations critical to defense infrastructure projects. All work must comply with the technical and quality standards expected for military construction, and submissions must be made through the designated DIBBS portal prior to the deadline.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring involves the installation of comprehensive electrical systems for commercial or infrastructure projects under a subcontract arrangement. Scope of work includes the supply and installation of conduits, wiring, electrical panels, and lighting fixtures, with performance required at Cherry Point, North Carolina, ZIP code 28533-0021. The solicitation is administered by the Defense Logistics Agency under the Department of Defense and is classified under NAICS code 238210, which corresponds to electrical contracting. The opportunity was posted on August 5, 2026, with a response deadline of August 13, 2026, providing a narrow window for interested parties to submit proposals. The contract does not specify a set-aside type and lacks detailed point of contact information, requiring potential bidders to reference the official DIBBS portal link for further submission details and technical requirements.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Concrete Forming and PouringThe contract titled Concrete Forming and Pouring seeks a subcontractor to perform formwork, reinforcement, and concrete placement for foundations, slabs, and other structural elements at a location in Tracy, California, with a ZIP code of 95304-5000. Work is classified under NAICS code 238110, which pertains to concrete work contractors, and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is intended for subcontracting purposes without a specific set-aside designation. Interested parties must submit proposals through the DIBBS portal using the provided link to ensure proper consideration. All work must comply with federal construction standards and be performed in accordance with technical specifications expected for military infrastructure projects.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract under the NAICS code 238210, focusing on the installation of comprehensive electrical systems including conduits, wiring, outlets, and lighting fixtures. It was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is specifically located in Tracy, California, with the zip code 95304-5000. The contracting office is part of the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON, though no specific point of contact details are provided. All proposals must be submitted through the DIBBS portal via the provided link before the deadline, and the contract does not specify any set-aside type or additional sourcing restrictions.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

T18 Water Main Replacement - ConstructionThe contract entails the replacement of approximately 20,000 feet of water main infrastructure within the east 100 acres of Terminal 18, including related fittings, valves, hydrants, and associated water service lines. This project is scoped to modernize and upgrade the existing water distribution system to ensure reliability, improve operational efficiency, and meet current safety and regulatory standards for port infrastructure. The work will require coordinated construction activities across a densely used terminal area, demanding careful planning to minimize disruption to ongoing port operations. The contract is forecasted by the Northwest Seaport Alliance, operating under the Port of Seattle, with a NAICS code of 237110 indicating it falls under water and sewer line and related structures construction. Primary contact for inquiries is Angela Peterson, with Greg Stamatiou serving as the Project Manager. The solicitation was posted on July 31, 2026, and all relevant details and submission requirements can be accessed through the provided portal link. While no set-aside provisions are indicated, interested parties should prepare to meet the technical and logistical demands of performing utility replacement in an active maritime environment.

Northwest Seaport Alliance (NWSA)

POSTED

about 8 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Emerson St. Sinkhole RepairThe contract involves repairing a sinkhole caused by a disconnected segment of stormwater drain line that previously fed into the main King County sewer line beneath Emerson Street. The work includes excavation, removal of the damaged section, installation of a new stormwater pipe, and creating a secure connection to the main line. The project also requires backfilling and repaving the roadway with asphalt to restore surface integrity. Significant traffic control measures are necessary due to the location on a busy thoroughfare, where multiple lanes will be affected during construction. The project is managed by the Port of Seattle through its Waterfront Project Management division, with primary contact information provided for Marilynn Montenegro and Project Manager Brandon Klett. The work is classified under NAICS code 237110, indicating it falls under sewer and stormwater infrastructure construction, and was posted as a forecast on July 31, 2026.

Waterfront Project Management

POSTED

about 8 hours ago

DEADLINE

1947 Watermain - North Bound Airport Expressway PreservationThe Port of Seattle’s Aviation Project Management Group is forecasting the restoration of a 1947 water main located along the northbound Airport Expressway using cured-in-place pipe (CIPP) technology under a Design-Bid-Build procurement model. The project aims to preserve the integrity of the aging infrastructure without excavation, leveraging modern rehabilitation methods to extend service life and enhance system reliability. The work will involve lining the existing pipeline with a resin-saturated fabric liner that is inverted and cured in place, minimizing disruption to adjacent roadways and surrounding facilities. The contract falls under NAICS code 237110, indicating it is classified as Water and Sewer Line and Related Structures Construction. Moraa Omwega serves as the primary point of contact for inquiries, with Ray Moreno designated as Project Manager. The solicitation was posted on July 31, 2026, and while no set-aside designation or bid deadline has been specified, interested parties are directed to the official Port of Seattle portal for updates and detailed technical requirements. The place of performance is tied to the Airport Expressway, although exact geographic coordinates are not provided, and all work must be coordinated with ongoing airport operations to ensure safety and minimize impact to airfield access and logistics.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Biffy Facility ImprovementsThe contract titled Biffy Facility Improvements involves comprehensive upgrades to a facility to meet stringent safety and sanitation standards, focusing on the construction of a new non-combustible and explosion-proof structure with full interior and exterior lighting, ventilation, and space heating for freeze protection. The facility will include cameras, access doors for equipment, and surfaces that are sanitizable in accordance with NFPA 820 and FDA guidelines. Critical safety features include an emergency eyewash and emergency shower station with tempered water, fire extinguishers, and a fully redundant pump system with a duplicate backup pump and biffy tank to prevent system failure and ensure backflow prevention. Electrical and mechanical infrastructure will be modernized, and new channel drains and wet well cleaning systems will be installed to enhance operational reliability and compliance. All components are designed for durability, safety, and ease of maintenance in a high-risk environment. The work will be executed under the oversight of the Aviation Project Management Group of the Port of Seattle, with Point of Contact Jay Kim serving as the primary liaison and Rishiraj Savita listed as the Project Manager. The contract falls under NAICS code 238110, indicating construction of building contractors for specialized trades, and is publicly forecasted with a posted date of July 31, 2026. No set-aside type has been designated, and while specific performance location details are not provided, the project is expected to occur at a facility managed by the Port of Seattle. All aspects of the project are geared toward achieving operational continuity, regulatory compliance, and enhanced worker safety in a mission-critical infrastructure setting.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 8 hours ago

DEADLINE