Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

25--SHAFT,STEERING COLU

Active
SPE7LX26U9023Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation seeks quotes for 7 units of NSN 2530015775775, SHAFT STEERING COLU, under a total small business set-aside, with all responsible small business sources encouraged to respond. Quotes must be submitted electronically by the August 10, 2026 deadline, and no hard copies are available; specifications, plans, or drawings are not provided. The resulting contract, if awarded, will be an indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, with a guaranteed minimum of one unit annually. Deliveries will be made to various CONUS and OCONUS DLA depots via consolidation and containerization points. The approved source is identified as WWS 38201-3484, and the procurement is managed by the Department of Defense’s DLA Land and Maritime through its Columbus, Ohio office. All questions must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided online portal.

General Info

Seven steering shaft units under small business set-aside, indefinite delivery, $350K cap, delivery to DLA depots by 2026.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

336330 - Motor Vehicle Steering and Suspension Components (except Spring) ManufacturingView NAICS

Place of Performance

OH

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / Agency
Department Of Defense → DLA Land And Maritime
View Agency Profile
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
contact@example.gov

Full Description

Show more
Proposed procurement for NSN 2530015775775 SHAFT,STEERING COLU: Line 0001 Qty 7 UI EA Deliver To: By: 0075 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 1. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 64678 WWS 38201-3484. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 336330
New
DIBBS
SHAFT, STEERING COLUThe contract pertains to the procurement of seven units of a shaft assembly designated as SHAFT, STEERING COLU with NSN 2530-01-577-5775, issued under purchase request 1000238243. The solicitation, identified by number SPE7LX-26-U-9023, was posted on July 26, 2026, with a response deadline set for August 10, 2026. It is managed by the Defense Logistics Agency under the Department of Defense and classified as a federal solicitation without any specific set-aside designation. The item is intended for federal use, though no specific delivery location or contact details are provided within the published data. The full solicitation details and submission portal are accessible via the DIBBS platform at the specified web link.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
Federal
25--RESERVOIR,PUMP ASSEThe solicitation seeks up to 43 reservoir pump assemblies under NSN 2530015776257 through a Small Business Set-Aside, exclusively open to qualified small businesses as defined by the SBA. The contract, issued by the DLA Land and Maritime under solicitation number SPE7LX26U9017, is structured as a potential Automated Indefinite Delivery Contract with a one-year term or until cumulative orders reach $350,000, whichever comes first. The guaranteed minimum order is six units, with an estimated annual order volume of one, and deliveries will be distributed to various CONUS and OCONUS DLA depots via consolidated and containerized shipping points. The approved source for this item is 64678 14-20823-000, and no technical specifications, plans, or drawings are available for reference. All quotes must be submitted electronically through the SAM.gov portal before the deadline of August 10, 2026, and hard copies are not accepted. Questions must be directed via email to the designated point of contact, with further details accessible through the provided SAM.gov link or DIBBS website.
DLA Land And Maritime

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
Commercial Manufacturing of Steering Housing ComponentsThe contract calls for the commercial manufacture of steering housing components, either as commercial off-the-shelf items or custom-fabricated units, all of which must meet stringent military packaging and labeling requirements. The work is being solicited under the North American Industry Classification System code 336330, indicating it pertains to the manufacturing of automotive parts and accessories for defense applications, and is structured as a subcontract opportunity managed by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on July 23, 2026, with a firm response deadline of July 28, 2026, leaving a narrow window for interested parties to submit proposals. Although no specific location for performance is identified, the components are intended for federal military use and must comply with all applicable defense standards. The opportunity is accessible via the DIBBS portal, and while no set-aside provisions or point of contact details are provided, compliance with military-grade specifications for packaging and labeling is non-negotiable.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336330
New
DIBBS
VALVE, RELAY, AIR PRESSUThis contract specifies the procurement of 87 units of a valve, relay, air pressure, identified by NSN 2530-01-692-5359, under solicitation SPE7L3-26-T-133E, with a response deadline of August 3, 2026, and a delivery requirement of 258 days after award. The acquisition is a total small business set-aside under NAICS code 336330, managed by the Department of Defense’s Land Supplier Operations Vehicle Support agency, with performance located in New Cumberland, Pennsylvania. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and any proposed changes to configuration require formal engineering change proposals or variance requests. The item includes technical data subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including U.S. subsidiaries and foreign nationals, even within the United States. Access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed DLA-mandated export control training, and have received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs compliance with these restrictions, and removal of government identification from non-accepted items is also prohibited.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
ARM, CONTROL, VEHICULThe contract pertains to the procurement of ARM, CONTROL, VEHICUL, with a quantity of five units, under solicitation number SPE7L3-26-T-125T, issued by the Department of Defense through the Land Supplier Operations Vehicle Support agency. The item is associated with a National Stock Number 2530-01-676-4149 and has a delivery requirement of 168 days after award. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and performance is to occur in Jacksonville, Florida, with a NAICS code of 336330 for Vehicle Parts and Accessories Manufacturing. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization to qualify. Technical data related to the item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including those within the United States, and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA export control training, and prior authorization from DLA. Additionally, the contract incorporates requirements from the DLA Master List of Technical and Quality Requirements, packaging standards, and mandates the removal of government identification from non-accepted supplies. Primary point of contact is Matthew Curry at Matthew.Curry@dla.mil or 614-692-3059.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
BRAKE, SHOE TYPEThe contract is for the procurement of seven brake shoe types designated by part number 04-1063R and NSN 2530016239521 for use on F-16 aircraft, issued under solicitation SPE7L3-26-T-128M. Delivery is required within 168 days of award, with a firm delivery deadline of January 19, 2027, and the items must be shipped FOB origin with zero tolerance for quantity variance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any general standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 packaging directives, with hazardous materials requiring compliance with Fed-Std-313 and TQ requirement IP025. Non-hazardous items must be commercially packaged in accordance with ASTM D3951 unless overridden by a higher-priority DLA requirement. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and the unit of issue is each, with a total contract value based on a unit price of $7.00 per item. All packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack, and the point of contact for inquiries is Matthew Curry of the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
ACTUATOR, SPRING BRAThe contract is for the procurement of 17 units of an actuator, spring brake with NSN 2530-01-651-3965 under solicitation SPE7L3-26-T-129A, issued by the Defense Logistics Agency through the Land Supplier Operations Vehicle Support organization. Delivery is required within 168 days after order placement, with a response deadline of August 3, 2026, and the solicitation was posted on July 23, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessment organizations involved. The use of class I ozone-depleting chemicals is explicitly prohibited, and any substituted chemicals require prior approval unless already authorized by specifications. Government identification must be removed from non-accepted supplies, and packaging must comply with DLA standards. Full and open competition applies, and the place of performance is identified as San Diego, California, 92136-3581. Primary point of contact is Viviane Kounkorgo, reachable via email and phone provided.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
CONTROL PARTS ASSEMThis contract under solicitation SPE7L4-26-T-5804 is for the procurement of six units of Control Parts Assem with NSN 2530-01-658-1698, to be delivered FOB origin within 168 days of award, with a required ship date of January 19, 2027 and an original delivery deadline of October 28, 2026. The unit price is $6.00 per unit, totaling $36.00, with no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, with no special marking required. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly permitted by the specification. Packaging, marking, and shipping must adhere to DLA’s RP001 requirements and IP025 for hazardous materials, if applicable. Items are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with transportation details governed by DLAD PROC NOTES C19 and C20. The contract incorporates technical and quality requirements referenced from the DLA Master List, and compliance with ANSI X12 unit of issue standards is mandated. The purchasing organization is the Department of Defense under LSO Combat Vehicles and Armament, and inquiries should be directed to Ryan Hammond.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
RIM, WHEEL, PNEUMATICThe contract covers the procurement of four pneumatic wheels and rims with NSN 2530-01-707-1846, requiring delivery within 20 days to Camp Pendleton, California, under the solicitation SPE7L1-26-T-875Q. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. The units are to be shipped FOB origin with zero variance allowed in quantity, inspected and accepted at the destination. Ozone-depleting chemicals are strictly prohibited, and any substitutes require prior approval unless explicitly authorized by the specification. Packaging must adhere to DLA’s RP001 requirements, and shipment must use the fastest traceable means—parcel post is forbidden. The delivery address is the 1st Recon Battalion, and the freight shipping point is the Distribution Management Office, also at Camp Pendleton. The contract mandates use of the DoD unit of issue, and all technical and quality criteria are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date. The required delivery date is April 24, 2026, and the point of contact for inquiries is Kristina Derry with the DLA.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
CABLE AND CONDUIT AThis contract pertains to the procurement of one unit of cable and conduit identified by NSN 2530016672697 under solicitation SPE7L1-26-T-874W, with a required delivery within five days of award. The item must be delivered FOB origin with no variance allowed in quantity, inspected and accepted at the destination, and packaged in strict accordance with MIL-STD-2073-1E and DLA packaging requirements. All bare metal surfaces must be preserved using code 89 preservative material to prevent corrosion, and moving parts must be lubricated; each item must be individually packaged. Cushioning material code JC is required to immobilize the item, protect protrusions, and safeguard against Handling, transportation, or storage damage. Marking must follow MIL-STD-129 with no special marking applied. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be approved unless explicitly authorized by specifications. The delivery destination is M29100 at Camp Kinser, Okinawa, Japan, with the shipment identified as RDD 999/NMCS and governed by DLA procedural notes C19 and C20. The responsible point of contact is Kristina Derry, and the contract is classified under NAICS code 336330 with a response deadline of August 3, 2026, and an original required delivery date of July 22, 2026.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
PUMP ASSEMBLY, POWERThe contract solicitation SPE7L1-26-T-825H seeks one unit of a PUMP ASSEMBLY, POWER with National Stock Number 2530017017073, to be delivered within five days after order at FOB Origin terms to the specified destination at W915FS, 13960 North Freeway, Houston, TX 77090-6916. The original required delivery date is July 9, 2026, and the solicitation response deadline is July 28, 2026. The item must comply with all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which take precedence over any industry standards such as ASTM D3951. Packaging must meet DLA’s RP001 requirements, adhere to MIL-STD-129 for marking and labeling, and conform to FED-STD-313 for hazardous material classification; non-hazardous items are to be commercially packaged per ASTM D3951 unless superseded by DLA requirements. Palletization must follow RP001, and all shipments must be traceable via FAST, prohibiting parcel post. The contract prohibits the use of ozone-depleting chemicals and hexavalent chromium, and mandates removal of government identification from non-accepted supplies. Compliance with the Buy American Act and Berry Amendment is required, and all contractor activities must align with applicable FAR and DFARS clauses including those concerning hazardous materials, cybersecurity (NIST SP 800-171), combating human trafficking, employment eligibility verification, equal opportunity, electronic payment submission via Wide Area Workflow, and restrictions on mandatory arbitration and subcontracting. The contractor must maintain current SAM registration, submit required socioeconomic representations, and disclose any foreign-sourced materials if applicable. Inspection and acceptance occur at the destination, governed by FAR 52.246-2. Payment must be submitted electronically through WAWF using either invoice and receiving report combinations or Invoice 2in1 formats. The contract is not a small business set-aside but applies a HUBZone price evaluation preference, and all offerors must ensure they are not suspended or debarred.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336330
New
DIBBS
HOUSING, STEERING COThis contract, identified as SPE7LX-26-U-8684, is a unilateral Simplified Indefinite-Delivery Contract (IDC) issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate for the procurement of Housing, Steering Co with NSN 2530015114850. The solicitation closed on July 28, 2026, and the resulting contract will have a one-year performance period during which delivery orders may be issued, though the estimated quantity of 62 units is non-binding and may not be purchased. Delivery is required FOB Origin within 75 days after order placement, with inspection and acceptance occurring at the destination. Packaging and marking must strictly comply with MIL-STD-129 for labeling and barcoding, RP001 for palletization, and the DLA Master List of Technical and Quality Requirements, which supersedes all other commercial standards including ASTM D3951. Hazardous materials, as defined by FED-STD-313, must be packaged according to TQ requirement IP025, while non-hazardous items must meet commercial packaging standards while still adhering to DLA’s higher-priority requirements. All packaging must be labeled with the correct Unit of Issue and Quantity per Unit Pack as specified in the contract. The contract mandates electronic invoicing only through Wide Area WorkFlow (WAWF) and requires compliance with multiple Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses covering small business representation, equal opportunity, cybersecurity (including NIST SP 800-171 with a specific deviation), whistleblower protections, hazardous material handling, export controls, prohibition of covered defense telecommunications equipment from Communist Chinese military companies, and safeguarding covered defense information. Compliance with these clauses is mandatory, and offerors must provide valid Unique Entity Identifiers and CAGE codes as part of their representations. The total potential contract value is capped at $350,000, but no firm obligation exists until a delivery order is placed and accepted. No specific place of performance, key personnel, or security clearance requirements are identified, and the contracting office for administration is located in Columbus, Ohio, with WAWF support available through the designated helpdesk.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

3 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 333613
New
Federal
25--COOLER,FLUID,TRANSMISSThe solicitation seeks quotes for 28 fluid coolers for transmissions, identified by NSN 2520011600710, under a total small business set-aside with a NAICS code of 333613. This is an RFQ issued by the DLA Land and Maritime office in Columbus, Ohio, and responses must be submitted electronically by the deadline of August 10, 2026. The procurement may result in an indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, with a guaranteed minimum of four units and an estimated two orders annually. Deliveries are to be made to various CONUS and OCONUS DLA depots through consolidated and containerized shipping points, with approved sources limited to 1HFQ6 3-1187E, 56161 10503078, and 95AU9 3-1187E. No hard copies of the solicitation or technical specifications are available; all information must be accessed via the provided SAM.gov link, and inquiries must be directed to the designated point of contact. Only responsible sources may submit quotes, which must be received electronically before the deadline to be considered.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
Federal
43--EJECTOR,JETThe solicitation seeks seven jet ejectors, identified by NSN 4320015543622, to be delivered to DLA Dist San Joaquin within 165 days of award. Only approved sources, identified by the identifiers 47WD8 5700230 and 47WD8 5999142, are eligible to respond. The procurement is conducted as a Request for Quotation with no hard copies available; all submissions must be submitted electronically through the designated online portal. The solicitation does not include specifications, plans, or drawings, and all responsible sources may submit quotes if received by the deadline. The effort is designated as a Women-Owned Small Business set aside under NAICS code 333996, administered by the DLA Land and Maritime office in Columbus, Ohio. The response deadline is August 6, 2026, and inquiries should be directed via email to the point of contact listed in the solicitation document accessible through the provided SAM.gov link.
Fluid Power Pump and Motor Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
Federal
43--PUMP,SLIDING SHOEThe contract seeks the procurement of 33 units of NSN 4320012356167, a sliding shoe pump, to be delivered to W1A8 DLA DISTRIBUTION within 280 days after award. The approved source for this item is designated as 52330 CW7055/H-200C.I., and only quotes submitted electronically will be accepted. The solicitation is issued as an RFQ under number SPE7M126T232K, with no hard copies available, and no specifications, plans, or drawings are provided. All responsible sources may respond, provided submissions are received by the deadline of August 6, 2026. This procurement is a total small business set-aside under NAICS code 333996, reserved exclusively for small businesses as defined by the SBA. The contracting activity is managed by the Department of Defense through DLA Land and Maritime, based in Columbus, Ohio, with inquiries directed to the designated point of contact via email. The solicitation will be accessible solely through the online SAM.gov portal linked in the notice.
Fluid Power Pump and Motor Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
Federal
48--VALVE,CHECKThe contract solicitation seeks quotes for 189 units of the valve check with NSN 4820011952879, to be delivered to DLA Distribution at W1A8 within 225 days after award. The approved source for this item is 91816 2677A-4EE, and only electronically submitted quotes will be accepted; hard copy submissions are not permitted. The solicitation, identified as SPE7MC26T155B, is an RFQ posted on July 26, 2026, with a response deadline of August 6, 2026, and is open to all responsible sources without set-aside restrictions. The NAICS code is 332911, and the procuring agency is the Department of Defense through DLA Land and Maritime, located in Columbus, Ohio. No specifications, plans, or drawings are available for this requirement, and all inquiries must be directed via email to the designated point of contact, with additional information accessible through the provided SAM.gov link or DIBBS portal.
Industrial Valve Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
Federal
53--KIT,REPAIR,AIRCRAFThe solicitation seeks proposals for 12 units of NSN 5340015022923, a repair kit for aircraft, with delivery required within 116 days after award. This procurement may lead to an indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with an estimated one order per year and a guaranteed minimum of one unit. Items will be shipped to multiple Department of Defense Logistics Agency depots across the Continental United States and overseas, with consolidation and containerization handled through designated points. Only two approved sources are recognized for this item: 00994 KD3961 and 69134 KD3961. The solicitation is issued as a request for quote under number SPE7LX26U9019, exclusively available electronically via the SAM.gov link, with no hard copies provided and no technical specifications, plans, or drawings accessible. All responsible vendors may submit quotes, which must be received electronically before the August 10, 2026 deadline. The contracting activity is managed by the DLA Land and Maritime office in Columbus, Ohio, with inquiries directed to the designated point of contact listed in the solicitation document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
Federal
29--FILTER,FLUIDThe U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 228 fluid filters under NSN 2940015591820, with a guaranteed minimum quantity of 34 units. This procurement is conducted as a combined solicitation under the Small Business Administration Total Small Business Set-Aside program, exclusively open to qualified small businesses. The contract, if awarded, may take the form of an indefinite-delivery contract valid for one year or until aggregate orders reach $350,000, with an estimated two orders per year. All items must be shipped to various DLA depots across CONUS and OCONUS via consolidated and containerized shipping points, with delivery required within 62 days of order placement. The only approved source for this item is identified by the supplier code 61080 01542705. The solicitation, numbered SPE7LX26U9022, is posted online with no hard copies available, and all quotations must be submitted electronically by the August 10, 2026 deadline. No specifications, plans, or drawings are provided, and responsible sources are encouraged to submit quotes based on the provided data. Inquiry contact information is available through the listed buyer email, and the full solicitation document can be accessed via the SAM.gov link or the DIBBS website.
Other Motor Vehicle Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332919
New
Federal
47--ADAPTER,STRAIGHT,SWThe contract solicitation is for 49 straight adapters with NSN 4730009635846, to be delivered to DLA Distribution Puget Sound within 124 days after award. This is a qualified products list item, and only sources listed on the QPL are eligible to respond. The solicitation is issued as an RFQ under number SPE7M326T7703, published on July 26, 2026, with a response deadline of August 6, 2026. All quotes must be submitted electronically through the SAM.gov platform; hard copies are not accepted. The procurement falls under NAICS code 332919 and is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Technical specifications and standards are available electronically. Questions must be directed via email to the point of contact listed in the solicitation, with further details accessible through the provided link or via the DIBBS portal using the solicitation number.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
Federal
29--GOVERNOR,DIESEL ENGINEThe contract seeks the procurement of two diesel engine governors, identified by NSN 2910012809338, to be delivered to W6YN USALRCTR JB LANGLEY within five days of award. Only approved sources, specifically 39VG9 8448939 and 6Y051 8448939, are eligible to respond. The solicitation is issued as a Request for Quote under number SPE7L426T5829, with a response deadline of August 6, 2026. All submissions must be made electronically through the SAM.gov platform, as hard copies are not available and no specifications, plans, or drawings are provided. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333618 and is managed by the DLA Land and Maritime office in Columbus, Ohio. Questions must be directed via email to the designated point of contact, with further details accessible through the provided SAM.gov link.
Other Engine Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
Federal
48--VALVE,RELIEF,PRESSUThe U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 41 units of NSN 4820014737464, a pressure relief valve, under solicitation number SPE7MC26T155C. The requirement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, with a NAICS code of 332911, and quotes must be submitted electronically by the deadline of August 6, 2026. Delivery is required to DLA Distribution San Diego within 158 days after contract award. Only approved sources, identified as 06239 A733 and 70210 2784514-2, are eligible to respond, though all responsible sources may submit a quote if timely received. No hard copies of the solicitation are available, and specifications, plans, or drawings are not provided. The solicitation can be accessed only through the online SAM.Gov link, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document.
Industrial Valve Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
Federal
48--VALVE,SOLENOIDThe U.S. Department of Defense, through DLA Land and Maritime, is seeking quotes for three solenoid valves with NSN 4810014310427 under solicitation SPE7MC26T155G, which is a total small business set-aside as defined by FAR 19.5. The procurement is limited to approved sources, specifically manufacturer 86184 with part number 83332-02D, and all responsible small business vendors may respond provided submissions are received electronically by the deadline of August 6, 2026. The required quantity of three units must be delivered to W1A8 DLA Distribution within 165 days after award, with no hard copies of the solicitation available—the full details must be accessed online via the provided SAM.gov link. No technical specifications, plans, or drawings are provided, and inquiries must be directed via email to the designated point of contact listed in the solicitation’s block 5 or through the DIBBS website using the solicitation number. The NAICS code for this procurement is 332911, classifying it under Other Fabricated Metal Product Manufacturing, and it is issued by the Office of DLA Land and Maritime located in Columbus, Ohio. The solicitation type is combined, meaning it integrates both solicitation and award functions, and electronic submission of quotes is mandatory. The government has not specified a place of performance beyond the delivery destination, and all vendors must ensure timely electronic response to be considered. The procurement is structured to prioritize small businesses, and compliance with the set-aside requirements is essential for eligibility. Access to the complete solicitation document is exclusively available through the online SAM.gov portal, and failure to consult the official source may result in incomplete or ineligible submissions.
Industrial Valve Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
Federal
30--CONNECTING LINK,RIGIDThe U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 40 rigid connecting links identified by NSN 3040011586090 under solicitation number SPE7L126T878H, which is a total small business set-aside as defined by FAR 19.5. The procurement requires delivery of 38 units to DLA Distribution San Diego within 722 days after award, with two additional units due at 120 and 512 days after award respectively. All responsible small business sources are encouraged to submit electronically filed quotes prior to the response deadline of August 6, 2026. The North American Industry Classification System code for this requirement is 333613, and inquiries must be directed via email to the designated point of contact listed in the solicitation document. The contracting office is located in Columbus, Ohio, and the place of performance is not specified beyond the delivery destination.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334290
New
Federal
59--AMPLIFIER,ELECTRONIThe U.S. Department of Defense, through DLA Land and Maritime, is seeking to procure eight electronic amplifiers with NSN 5996007047173 under a total small business set-aside solicitation, identified as SPE7M5426T354C. The requirement is classified under NAICS code 334290, and only small business concerns are eligible to respond. The approved source for this item is 45934 with part number 965-3008-004, and the delivery destination is DLA Distribution Warner Robins with a required delivery timeline of 239 days after award. All quotes must be submitted electronically through the SAM.gov portal, and no hard copies of the solicitation are available. Specifications, plans, or drawings are not provided, and any responsible small business may submit a quote if received before the deadline. The solicitation was posted on July 26, 2026, and responses are due no later than August 6, 2026. Questions regarding the solicitation must be directed via email to the designated point of contact, with additional information accessible through the SAM.gov link provided.
Other Communications Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details