This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

47--STRAINER ELEMENT,SE

Closed

SPE7M326T7109Federal

Submission Closed07/09/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331222

New

DIBBS

Raw Material Supply for Military-Grade Metal ComponentsThe contract obligates the supplier to provide high-strength steel or aluminum alloy that meets stringent military specifications for use in the fabrication of engine mount brackets. All materials must be domestically sourced with full traceability from raw material origin through to final delivery, ensuring compliance with defense supply chain security requirements. The material must be certified to withstand extreme operational conditions and align with established military standards for durability, tensile strength, and dimensional precision. The solicitation, issued under the NAICS code 331222, is classified as a subcontract within the Department of Defense’s Land Supply Chain initiative, with performance required at Fort Riley, ZIP 66442-5936. Interested parties must submit responses by July 27, 2026, with the opportunity posted on July 14, 2026. The procurement emphasizes domestic production capabilities and material accountability, with no set-aside provisions specified, and all deliveries must meet exacting military-grade criteria without exception.

POSTED

DEADLINE

WIRE, NONELECTRICALThis contract specifies the procurement of nonelectrical steel wire made from cold-drawn, passivated type 302 corrosion-resistant stainless steel with a diameter of 0.041 inches and a total length of 217 feet per pound, delivered in multiple shipments totaling 2,298 pounds across seven delivery points. The material must conform to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including compliance with ASTM A580/A580M-23, SAE AMS2806, and NASM20995 Rev NR 2. Each shipment requires a Certificate of Quality Compliance (Mill-Material Certification) and must be accompanied by detailed metal certification documentation. Continuous marking on every unit of issue is mandatory and must include the DLA contract number, NSN, specification revision, alloy and temper designation, manufacturer’s heat and lot number, and dimensions, using only legible, waterproof stamping or stenciling that does not contaminate the product. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with special preservation using ASTM A700 methods and marking per MIL-STD-129. The wire must be supplied in whole-foot lengths only and packaged on spools with adhesive labels on both sides, with tags acceptable for wire units. Compliance with the Qualified Suppliers List for Distributors (QSLD) is strictly enforced; only suppliers listed on the QSLD are eligible for award, and any deviation constitutes an unauthorized substitution that may trigger criminal penalties. The product is classified as a commercial item and a critical application item with firm fixed pricing, zero quantity variance, and inspection and acceptance occurring at the destination. All shipments must meet a 95-day delivery schedule from the award date and be routed to specified DLA distribution centers across the U.S., with preservation and marking codes strictly defined to ensure traceability and compliance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Domestic High-Strength Steel Wire SupplyThe contract requires the supply of military-grade high-strength steel wire or cable stock that meets exacting EDL and R/I specifications for use in the fabrication of wire rope assemblies. This procurement is a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, and is intended for production purposes aligned with defense-grade material standards. The material must comply with stringent technical requirements to ensure performance, durability, and reliability in military applications. The opportunity was posted on July 13, 2026, with a firm response deadline of July 16, 2026, indicating a compact timeline for submissions. The NAICS code 331222 confirms the focus on steel wire drawing and finishing operations. All work and delivery must be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The procurement is not set aside for any specific small business category, and interested parties must submit proposals through the designated DIBBS portal to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

GAGE, PRESSURE, DIALThe contract is for the procurement of three pressure dial indicating gauges with NSN 4240-01-625-3353 under solicitation SPE8E6-26-T-3646, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 35 days of the contract award, with an original delivery deadline of September 17, 2026, and a need ship date of August 25, 2026. The items are to be delivered FOB origin with no tolerance for quantity variance, inspected and accepted at the destination. Packaging must comply with DLA Packaging Requirements for Procurement RP001, and if the item is non-hazardous per Fed-Std-313, it must be commercially packaged in accordance with ASTM D3951, unless superseded by higher-priority DLA Master List technical or quality requirements identified by R or I numbers, which take precedence. All packaging and labeling must conform to MIL-STD-129, and palletization must follow RP001 guidelines. The unit of issue is each, priced at $3.00 per unit, totaling $9.00. The delivery address is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. Transportation directives are governed by DLAD Proc Note C19 for general transport and C20 for first destination. The solicitation was posted on July 8, 2026, with responses due by July 20, 2026, and the NAICS code is 331222 for pressure gauge manufacturing.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

FILTER AND SENSORThe contract specifies the procurement of four units of a filter and sensor with NSN 4240-01-623-0515 under solicitation SPE8E6-26-T-3653, requiring delivery within 50 days FOB origin with no variance in quantity. All packaging must comply with DLA’s master requirements, prioritizing DLA technical and quality standards over ASTM D3951, and must be labeled per MIL-STD-129. Hazardous material packaging must follow TQ requirement IP025 if applicable per FED-STD-313; otherwise, commercial packaging under ASTM D3951 is required. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The unit of issue is each, priced at $4.00 per unit for a total of $16.00. The supplier must ensure all government identification is removed from non-accepted supplies and comply with any applicable covered defense information requirements. The required ship date is September 9, 2026, with an original delivery deadline of October 1, 2026. Transportation guidelines are defined under DLAD Proc Notes C19 and C20, and the point of contact for inquiries is John Lieb at the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

6 days ago

DEADLINE

in 6 days

AI Contract Overview

The contract seeks the procurement of 10 units of Strainer Element, SE, identified by NSN 4730219129463, to be delivered to W1A8 DLA DISTRIBUTION within 288 days after order placement. The only approved source for this item is 35076 740680, and no alternative suppliers are authorized unless specifically exempted under federal acquisition regulations. The solicitation, identified as SPE7M3094109, was posted on June 28, 2026, with a response deadline of July 9, 2026, and is conducted as a combined solicitation open to all responsible sources. Quotes must be submitted electronically and will not be accepted in hard copy form. No technical specifications, plans, or drawings are available to bidders, and all quotations must be based on the provided NSN and approved source information. The procurement is managed by the DLA Land and Maritime under the NAICS code 331222, with the point of contact for inquiries being DibbsBSM@dla.mil, and all relevant documents must be accessed via the provided SAM.gov link or the DIBBS website using the solicitation number.

General Info

Procure 10 strainerelements NSN 4730219129463 for DLA by 288 days, submit quotes via SAM.gov by July 9, 2026.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

331222 - Steel Wire DrawingView NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 28

Combined Synopsis

Response DeadlineJul 9

Deadline has passed

Submission Closed

07/09/2026, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Proposed procurement for NSN 4730219129463 STRAINER ELEMENT,SE: Line 0001 Qty 10 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0288 DAYS ADO Approved source is 35076 740680. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.