Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

53--SLIDE,DRAWER,EXTENS

Active
SPE7L126T852AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of eight drawer slides, extended, identified by NSN 5340012007247, with delivery required to W1A8 DLA DISTRIBUTION within 69 days after award. The only approved source for this item is 05236 with part number 1503556-L, and no alternative suppliers or substitutions are permitted. The solicitation, numbered SPE7L126T852A, is issued as a requests for quotation under a combined procurement type with no set-aside restrictions, and is open to all responsible sources capable of meeting the requirement. Quotes must be submitted electronically via the SAM.gov portal and hard copies are not accepted. Technical specifications, drawings, or detailed plans are not provided, and bidders are expected to rely on the NSN and approved source information. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, and is managed by the DLA Land and Maritime office in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact, as referenced in the solicitation’s block 5 or through the official DIBBS website using the solicitation number.

General Info

Procure eight extended drawer slides NSN 5340012007247 from approved source 05236, deliver to W1A8 DLA within 69 days via SAM.gov.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / Agency
Department Of Defense → DLA Land And Maritime
View Agency Profile
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
contact@example.gov

Full Description

Show more
Proposed procurement for NSN 5340012007247 SLIDE,DRAWER,EXTENS: Line 0001 Qty 8 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0069 DAYS ADO Approved source is 05236 1503556-L. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Precision Hardware Manufacturing – FAIRLEAD, BLOCK (NSN: 5340016294110)
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 332510
New
DIBBS
Manufacturing of Loop Clamp (NSN 5340-01-103-0271)The contract entails the fabrication and supply of 1,108 loop clamps meeting strict military standards MIL-DTL-85052/3C and MIL-DTL-85052B, ensuring structural integrity and performance under demanding operational conditions. Each clamp is identified by the National Stock Number 5340-01-103-0271 and is part of a subcontract under the North American Industry Classification System code 332510, indicating manufacturing in the forgings and stampings sector. The effort is managed by the Defense Logistics Agency under the Department of Defense, with the contract posted on July 20, 2026, and performance likely aligned with defense supply chain priorities. Although specific delivery locations and point of contact details are not provided, the contract is linked to the DIBBS system under award number SPE7M526P4260, signifying its formal inclusion in defense procurement records and compliance with federal contracting protocols.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 332510
New
DIBBS
LEVER, MANUAL CONTROThe contract is for a single manual control lever with NSN 5340-01-147-3421, issued under solicitation SPE7L1-26-T-853Y by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The item is subject to strict technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly permitted by specification. Technical data associated with the item is controlled under ITAR or EAR, restricting export or disclosure to foreign persons without authorization, and only contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal approval may access such data. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Delivery is required within five days of award to Anniston, Alabama, with a response deadline of July 31, 2026, and full and open competition is authorized. The primary point of contact is Michael Nordahl at DLA’s contracting office.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP ASSEMBLY, LOWEThe contract is for one unit of a CLAMP ASSEMBLY, LOWER with NSN 1730-01-312-5825, under solicitation SPE8EF-26-Q-0135, with a required delivery within 60 days after award. The purchase request number is 7016529252, and the quantity requested is two units. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons—regardless of location—is strictly regulated and requires prior authorization from the Department of State or Department of Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, and extends to foreign national employees. Compliance with DFARS 252.225-7048 is mandatory. Access to the controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation was posted on July 20, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense through the Construction & Equipment Manufacture & Construction organization, with Russell Keiser listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract is for 891 units of a straight, headed pin, identified by part number MS20392-7C107 and NSN 5315-00-904-1635, manufactured in accordance with non-government standards NASM20392 and NASM5673, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. The item is classified as a critical application component and must comply with stringent inspection and acceptance protocols, including zero non-conformances in sampling under MIL-STD-1916 or ASQ H1331, with verification levels assigned per critical, major, and minor attributes. Packaging and labeling must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA Packaging Requirements, and all government identification removed from non-accepted items. Delivery is FOB origin, with inspection and acceptance also occurring at origin, and the supplier must meet a 144-day delivery schedule with zero tolerance for quantity variance. The contract mandates compliance with CMMC Level 2 cybersecurity self-assessment requirements and includes tailored quality assurance provisions applicable to both manufacturers and non-manufacturers. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by specific DLA procedural notes. The purchase request number is 7017272348, the unit price is $0.00 per unit, and the total contract value is not specified beyond unit quantity. The solicitation number is SPE4A6-26-T-07WP, with a response deadline of July 28, 2026, and a required ship date of December 20, 2026, against an original delivery target of December 4, 2026. All documentation must reference the DLA unit of issue and purchase unit guidelines, and primary point of contact is Michael Jefferson at the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUSThe contract pertains to the procurement of five protective plugs, part number 5340-01-643-7659, under solicitation SPE7L1-26-T-853C, with a required delivery date of July 17, 2026, and a five-day delivery window from origin. Each unit is priced at $5.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Hazardous materials require packaging per IP025, while non-hazardous items must follow ASTM D3951. Palletization must meet RP001 standards, and each unit pack contains one item. Shipping must be via the fastest traceable method; parcel post is prohibited. The freight delivery address is the Portsmouth Naval Shipyard in Kittery, Maine, while the parcel post address is in Portsmouth, New Hampshire. The contract specifies government-only use identifiers and mandates compliance with all DLA documentation, source approval, and quality requirements referenced by R and I numbers. The unit of issue is the individual unit, and the purchasing entity is the DLA under the Department of Defense.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMPRESThe contract pertains to the procurement of 268 helical compression springs with NSN 5360-00-952-0181, issued under solicitation SPE7L1-26-T-853M by the Department of Defense through the Land Supply Chain. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the acquisition size and date of solicitation or amendment. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The delivery schedule requires fulfillment within 240 days after award, and the place of performance is listed as Phoenix, Arizona, with a zip code of 85043. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under a NAICS code of 332510 for spring manufacturing. Primary point of contact is Derek Roberts, reachable via email and phone provided, and all submissions must be made through the DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BLOCK, APEXThis contract, identified as BLOCK,APEX under solicitation SPE7L1-26-T-852Z, pertains to the procurement of two units of material designated by NSN 5340-20-002-3155 and part number 200-1318-101, with a unit price of $2.00 per item and a total contract value of $4.00. Delivery must be completed within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The product must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization and packaging materials must adhere to specified standards, and shipment must be sent by traceable means excluding parcel post. The delivery is directed to two locations: a parcel post address in FPO AE 09627-1100, USA, which must not be used for shipping, and a freight shipping address at Sigonella, Italy, with detailed building and contact information included. The required delivery date is July 16, 2026, and the solicitation response deadline is July 31, 2026. The contract falls under NAICS code 332510 and is managed by the U.S. Department of Defense’s Land Supply Chain. Technical specifications are tied to DLA’s official standards and revisions in effect at the time of solicitation, and all substitutes or alternative materials require prior approval unless explicitly authorized by the specification. The contract includes specific government-only identifiers for internal tracking and reporting purposes.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of a mounting bracket identified by NSN 5340-01-685-5071 and part number 2217419-001, with a quantity of two units to be delivered within 20 days under solicitation SPE7L1-26-T-852X. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements referenced from the DLA Master List, including prohibitions on Class I ozone-depleting chemicals, which override any conflicting specifications but do not reduce product performance expectations. Packaging must follow MIL-STD-2073-1E and DLA packaging guidelines, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization and unit packaging are specified with precise codes, and shipping must use traceable means—parcel post is strictly prohibited. The delivery destination and freight address are both listed as Holloman Air Force Base, New Mexico, with a required delivery date of July 16, 2026. The contract includes specific procurement and unit of issue details aligned with DoD standards, and the point of contact for inquiries is Kristina Derry of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of 30 units of a mounting bracket with NSN/Part Number 5340-01-735-5937 under solicitation SPE7L1-26-T-853S. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The use of Class I ozone-depleting chemicals is strictly prohibited in any delivered items, superseding any conflicting specification requirements without waiving product performance standards; any substitute chemicals require prior approval and must be accompanied by a complete data package detailing both the approved and alternate parts. Delivery is scheduled within 232 days of award, with performance occurring at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026. The contract falls under NAICS code 332510 and is managed by the Department of Defense’s Land Supply Chain, with Michael Nordahl listed as the primary point of contact via email and phone.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, TAPEREDThe contract pertains to the procurement of a tapered bushing with part number 143241-01901 and NSN 5365-01-244-1608, under solicitation SPE4A7-26-T-582N, with a required quantity of three units to be delivered within 20 days from the contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance controlled by the version in effect on the solicitation or award date depending on acquisition type. Packaging must adhere strictly to MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization, while marking must follow MIL-STD-129 with no special marking codes applied. Sampling and inspection protocols mandate zero non-conformances per MIL-STD-1916 or ASQ H1331 unless otherwise specified, with attributes classified as critical, major, or minor and assigned corresponding verification levels or AQLs. Inspection and acceptance occur at the destination, and delivery is FOB origin with no variance allowed in quantity. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated receiving facility at Fort Irwin, California, with detailed routing and contact information provided. The contract identifies the supplier as Hutchinson Aerospace & Industry, Inc., and includes government-specific codes for tracking, distribution, and internal use, with the original required delivery date set for August 1, 2025.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract is for one mounting bracket, identified by NSN 5340-01-656-6506 and part number PCM-001-RSHNDBRKCBLBRKT, supplied by Brothers Body and Equipment, LLC as a commercial off-the-shelf item. Delivery is required within five days to the address in Binghamton, NY, with FOB origin terms and no variance allowed in quantity. The item must be packaged in accordance with DLA’s packaging requirements, which take precedence over ASTM D3951 if the material is non-hazardous, or Fed-Std-313 and TQ requirement IP025 if hazardous. All packaging must be labeled per MIL-STD-129, palletized per RP001, and shipped via traceable means—parcel post is prohibited. The contract explicitly prohibits the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification while maintaining all product performance requirements. Substitute chemicals require prior approval unless already authorized. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The item is designated as covered defense information under RD002, and must be shipped with the RDD code and freight details specified, with a required delivery date of June 15, 2026.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 334413
New
Federal
59--MICROCIRCUIT,LINEARThe contract involves the procurement of 26 units of the microcircuit, linear with NSN 5962010512101, to be delivered to DLA Distribution DDWO within 221 days of award. Only approved sources—MC01602-2 from manufacturers 07180, 0WEC9, 50721, and TS-3339 from 54485—are eligible to respond. The solicitation is issued as an RFQ under the number SPE7M526T336S and is exclusively available electronically through the provided SAM.gov link; no hard copies are offered, and no specifications, plans, or drawings are included. The opportunity is set aside entirely for small businesses under the SBA program as defined by FAR 19.5, with NAICS code 334413 indicating the classification for semiconductor and related device manufacturing. All responsible sources may submit quotes electronically, and submissions must be received by the deadline of July 31, 2026. The contracting office is the DLA Land and Maritime based in Columbus, Ohio, with communications directed to the designated buyer email provided in the solicitation.
Semiconductor and Related Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
Federal
59--SOLENOID,ELECTRICALThe contract solicitation seeks electrical solenoids with NSN 5945004077030 under an RFQ issued by the DLA Land and Maritime office in Columbus, Ohio, with a response deadline of August 4, 2026. A minimum of four units must be ordered, with an initial line item for 30 units to be delivered within 61 days, though the overall procurement is structured as a potential Indefinite Delivery Contract valid for one year or until aggregate orders reach $350,000, with an estimated two orders annually. Deliveries will be directed to multiple DLA depots across CONUS and OCONUS locations through consolidated and containerized shipping. Only approved sources—25628 01085.0002 and 81978 C2J380Y—are eligible to respond. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333612, and quotes must be submitted electronically through the SAM.gov platform; no hard copies or technical specifications, plans, or drawings are provided. All responsible sources may submit bids if received by the deadline, and inquiries must be directed via the designated email address listed in the solicitation.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333612
New
Federal
30--LEADSCREW,SCREW JACThe solicitation seeks four lead screws, screw jac, identified by NSN 3010017323696, to be delivered to W1A8 DLA DISTRIBUTION within 208 days of award. The only approved source for this item is vendor 57855 with part number D2758-01-00. This is a full small business set-aside under the SBA program, with the NAICS code 333612, meaning only small business concerns are eligible to respond. The procurement is conducted as a Request for Quotation (RFQ) with no hard copies available; all submissions must be submitted electronically. Specifications, plans, or drawings are not provided, and any responsible source may submit a quote as long as it is received by the deadline. The solicitation number is SPE7L326T123T, posted on July 20, 2026, with responses due by July 31, 2026. The contracting activity is managed by the DLA Land and Maritime office in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
Federal
59--SWITCH,RADIO FREQUEThe contract solicits two radio frequency switches with NSN 5985014635144 for delivery to W1A8 DLA DISTRIBUTION within 157 days after award. Only two approved sources are authorized to respond: 32187 MD-012C047 and 49956 11476015. The procurement is conducted via a Request for Quotation issued under solicitation number SPE7M5526T336M, with no hard copies available; all quotes must be submitted electronically through the designated SAM.gov portal. The solicitation opens on July 20, 2026, and closes on July 31, 2026. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes if they meet timely submission requirements. The acquiring activity is the Department of Defense through DLA Land and Maritime, located in Columbus, Ohio, with primary point of contact for inquiries being the buyer listed in block 5 of the solicitation document. The NAICS code is 334220, indicating a classification under Radio and Television Broadcasting and Communications Equipment Manufacturing.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
Federal
59--CONNECTOR,PLUG,ELECTRIThe contract is for the procurement of 265 units of NSN 5935011143439 CONNECTOR, PLUG, ELECTRI, with a guaranteed minimum order of 39 units, under a solicitation that may lead to an Automated Indefinite Delivery Contract lasting one year or until aggregate orders reach $350,000.00, with an estimated one order per year. Items are to be delivered to various CONUS and OCONUS DLA depots via consolidation and containerization points, and the item is on a Qualified Products List, requiring compliance with specified military standards. Quotes must be submitted electronically by the deadline of August 4, 2026, and hard copies are not available; all responsible sources may respond. The solicitation number is SPE7M126U4482, issued by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Point of contact for inquiries is provided via email, and the full solicitation document can be accessed through the SAM.gov link referenced.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 326122
New
Federal
47--TUBE,METALLICThe solicitation seeks a single metallic tube, NSN 4710016656284, under a Small Business Set-Aside, with a guaranteed minimum order of one unit and an estimated annual order volume of one, though the total contract value may reach up to $350,000 over its one-year term or until that spending limit is reached. The item must be sourced exclusively from approved vendor 93146 3545, and delivery will be made to various DLA depots across CONUS and OCONUS, utilizing consolidation and containerization points for efficiency. Submission is strictly electronic, with no hard copies available, and quotes must be received by the deadline of August 4, 2026, through the SAM.gov portal using solicitation number SPE7M126U4490. This is a combined solicitation under NAICS code 326122, with no technical specifications, plans, or drawings provided, and only responsible sources are invited to respond. The contract may transition into an indefinite delivery contract, and all quotes will be evaluated upon timely receipt. The point of contact for inquiries is listed via email, with additional information accessible through the DIBBS website or the provided SAM.gov link.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
Federal
29--PUMP,FUEL,METERINGThe U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 10 fuel metering pumps identified by NSN 2910016885763 under solicitation number SPE7L526T4527. The requirement is for delivery to W1A8 DLA Distribution with a deadline of 156 days after award, and all submissions must be made electronically; hard copies are not accepted. The solicitation, available only online via the provided SAM.gov link, is open to all responsible sources and does not designate a specific set-aside type. The North American Industry Classification System code is 336310, indicating the procurement falls under aircraft and parts manufacturing. Technical documentation including digitized drawings and military specifications may be retrieved or ordered electronically. The primary point of contact for inquiries is DibbsBSM@dla.mil, with further details accessible through the solicitation’s Additional Information link or by searching the solicitation number on DIBBS. Responses must be submitted no later than July 31, 2026.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336211
New
Federal
PARTS KIT,FLOOR,VEH; 2510-014995138The U.S. Department of Defense, through DLA Land and Maritime, is conducting market research to identify potential manufacturers capable of producing the Parts Kit, Floor, Veh with NSN 2510-01-499-5138 under a potential long-term contract. This notice is not a formal Request for Proposal but serves to gauge industry interest and capabilities. The item is classified under NAICS code 336211 and is associated with AMC 1 and AMSC G. Approved sources currently manufacturing this item include identified part numbers 57K02011, 12624740, and 12727580, with compliance to specifications CID A-A-52520B NOT 1 and CID A-A-60057. Technical drawings can be accessed through TDMT using reference number MR014995138. Interested parties must complete and submit a Market Research Questionnaire to Contract Specialist Kelly Nicklaus at kelly.nicklaus@dla.mil by 27 July 2026. Additional inquiries may be directed to Krista Krauss at Krista.Krauss@dla.mil or 614-692-9424. The solicitation number is CL26181004, and performance will be based in New Cumberland, Pennsylvania, with the contracting office located in Columbus, Ohio.
Motor Vehicle Body Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
Federal
59--CONNECTOR,RECEPTACLE,EThe solicitation seeks a single connector, receptacle, with NSN 5935014604596, in a quantity of ten units, under a potential Automated Indefinite Delivery Contract that will remain active for one year or until aggregate orders reach $350,000, whichever comes first. The guaranteed minimum order is one unit, with an estimated one order per year, and deliveries will be distributed to multiple DLA depots across CONUS and OCONUS via consolidated and containerized shipping points. This item is on a Qualified Products List, and only suppliers meeting the required specifications may respond. The solicitation is an electronic RFQ with no hard copies available, and all quotes must be submitted electronically by the deadline of August 4, 2026. Military standards and specifications can be accessed electronically. Only responsible sources are eligible to submit, and all timely responses will be considered. The procurement is managed by the DLA Land and Maritime office in Columbus, Ohio, and inquiries should be directed via email to the point of contact listed in the official solicitation document accessible through the provided SAM.gov link.
Nonferrous Forging

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
Federal
59--CONNECTOR,RECEPTACLE,EThe contract solicitation seeks quotes for NSN 5935004624724 CONNECTOR, RECEPTACLE, E, with an initial quantity of 39 units required for delivery within 113 days of award. This is an RFQ for a potential Automated IDC with a one-year term or until the total value of orders reaches $350,000, whichever comes first, with an estimated two orders annually and a guaranteed minimum of five units. Deliveries will be made to multiple DLA depots across CONUS and OCONUS via consolidated and containerized shipping points. The only approved source is 77820 348-33E18-85S1, and no physical specifications, plans, or drawings are available. The solicitation is restricted to Women-Owned Small Businesses under NAICS code 334417 and must be submitted electronically by the deadline of August 4, 2026. All responsible sources meeting the eligibility criteria may respond, with quotes required to be submitted online via the official SAM.gov portal, and no hard copies are provided. The contracting office is the DLA Land and Maritime based in Columbus, Ohio, with inquiries directed to the designated point of contact.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
Federal
25--BRAKE SHOE SETThe solicitation is for a total small business set-aside procurement of 12 brake shoe sets identified by NSN 2530010468316, with delivery required to DLA Dist San Joaquin under the W1A8 location within 151 days after award. The procurement is issued via an RFQ under solicitation number SPE7M226Q0648, posted on July 20, 2026, with quotes due by July 26, 2026. Only responsible sources may submit quotations, and all submissions must be made electronically; hard copies of the solicitation are not available. Digitized drawings and military specifications may be accessed or ordered online through the provided links. The action is classified under NAICS code 336390 and is managed by DLA Land and Maritime, located in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact, with further details accessible through the SAM.gov workspace link or DIBBS website using the solicitation number.
Other Motor Vehicle Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334419
New
Federal
59--ELECTRON TUBEThe contract solicitation seeks one unit of the electronic tube with NSN 5960005535792, with a total quantity of thirteen units to be delivered to DLA Distribution Warner Robins within 354 days after award. This is a combined solicitation issued as a Request for Quote, accessible only online through the provided digital link, with no hard copies available. All responsible suppliers may submit electronic quotes, provided they meet the submission deadline. The solicitation is a total small business set-aside under FAR 19.5, designated for small businesses as defined by the SBA, and is classified under NAICS code 334419. The issuing agency is the Department of Defense, specifically DLA Land and Maritime, with the point of contact for inquiries listed as DibbsBSM@dla.mil. All technical specifications, drawings, and military standards referenced in the solicitation must be obtained electronically via the DIBBS portal using the solicitation number SPE7M5526Q0737. The quote submission window closes on July 24, 2026, and responses must be received by that time to be considered.
Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details