Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

66--SENSOR,CURRENT

Active

SPE7M126T258EFederal

Response Deadline08/17/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the procurement of 16 units of SENSOR,CURRENT with NSN 6625016332924, to be delivered to W1A8 DLA DIST SAN JOAQUIN within 168 days of award. The only approved source for this item is vendor code 89305 466570, and quotations must be submitted electronically through the solicitation portal; hard copies are not available. This is a full and open competition under RFQ SPE7M126T258E, open to all responsible sources, with no set-aside restrictions. The solicitation was posted on August 6, 2026, and responses are due by August 17, 2026. No technical specifications, plans, or drawings are provided, and offerors are expected to rely on their own knowledge of the item. The contracting activity is managed by the DLA Land and Maritime office in Columbus, Ohio, with all inquiries directed to the designated point of contact via email. The NAICS code 334515 indicates this falls under the manufacturing category for other measuring and controlling devices.

General Info

Procure 16 current sensors NSN 6625016332924 from vendor 89305, deliver in 168 days, full and open competition.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsView NAICS

Place of Performance

OH

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 6

Combined Synopsis

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 12:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 6625016332924 SENSOR,CURRENT: Line 0001 Qty 16 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0168 DAYS ADO Approved source is 89305 466570. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M126T265K

The contract solicitation seeks 28 ammeters with NSN 6625123591534 under a Small Business Set Aside, total, identified by NAICS code 334515, with a sole approved source listed as D0857 265.01.0161. The procurement is managed by the DLA Land and Maritime organization, headquartered in Columbus, Ohio, and requires delivery to W1A8 DLA Dist San Joaquin within 168 days of award. All quotations must be submitted electronically through the online solicitation portal, and no hard copies or technical specifications, plans, or drawings are available for reference. The solicitation number is SPE7M126T265K, posted on August 6, 2026, with responses due by August 17, 2026, and only responsible sources that submit timely electronic quotes will be considered for award. Primary questions must be directed via email to the designated buyer contact, with further details accessible through the SAM.gov link or DIBBS platform using the solicitation number.

DLA Land And Maritime

POSTED

about 8 hours ago

DEADLINE

SERVER,AUTOMATIC DA

Solicitation # N0010426QNE03

This contract pertains to the repair of two units of NSN 7035-01-698-9903, identified as the SERVER,AUTOMATIC DA, under a firm-fixed-price arrangement with no consideration for new procurement or replacement. The repair must conform to technical reference TI20-S01-2 and adhere to MIL-STD-130 Rev N for marking, with all work executed per the contractor’s established procedures and authorized technical documents. A mandatory Government-Source Inspection and Acceptance is required, and the contractor must provide the CAGE codes for both repair and packaging facilities. The contractual turnaround time from asset receipt to Government acceptance is 136 days, measured from the validated Action Date in the Commercial Asset Visibility system, and the contractor must report throughput capacity and any constraints. Pricing must include the unit repair cost, a Beyond Repair price, and confirmation of whether the NSN is obsolete, with quotes submitted exclusively to Rachel Kern via email. The contract explicitly prohibits mercury contamination and mandates strict compliance with environmental and safety standards, including verification processes to detect and prevent mercury exposure. The contractor is responsible for all inspection, testing, and recordkeeping, with documentation retained for 365 days after final delivery. Packaging must follow MIL-STD-2073, and any design, material, or part number changes require prior written approval from the Contracting Officer, categorized under specific Code classifications. The Government retains the right to exercise a 100% increase in quantity within 256 days of award at the original pricing, without re-solicitation. The contract incorporates clauses on cybersecurity maturity certification, small business subcontracting, security prohibitions, and mandatory use of Workflow Pro, with all documents deemed officially issued upon electronic transmission. Submission deadlines and induction expiration dates are strictly enforced, and only authorized distributors of the original manufacturer may be considered for award, requiring formal proof of authorization.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

ELECTRONIC LOADS

Solicitation # N0016426Q0232

The U.S. Navy’s Naval Surface Warfare Center Crane is seeking four Kikusui electronic loads through a competitive solicitation, with offers accepted under a brand name or equal basis as defined by salient characteristics. The requirement falls under PSC 6130 and NAICS code 334515, and all proposals must be submitted via email to Cassidy Shaw by 12:00 PM Eastern Time on July 27, 2026. Delivery must be made FOB destination to Crane, Indiana, and vendors are required to maintain current registration in the System for Award Management. Solicitation amendments will be posted exclusively on sam.gov, and it is the sole responsibility of offerors to monitor the site for updates prior to the due date; no changes issued after the deadline will be communicated to non-submitters. This solicitation, issued under the FAR 13 synopsis exception, excludes set-asides and is open to all qualified contractors. Primary contact for inquiries is Cassidy Shaw, with secondary support available from Amy Haworth.

POSTED

about 8 hours ago

DEADLINE

Anritsu LMR Master S412E Handheld Analyzer System and Accessories

Solicitation # FA481926Q0079

The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting a single Anritsu LMR Master S412E Handheld Analyzer System along with all required accessories to support the 325th Communications Squadron. This is a brand-name acquisition requiring the specific Anritsu model, which must deliver comprehensive functionality including Land Mobile Radio maintenance, spectrum analysis, cable and antenna testing, GPS-based coverage mapping, distance-to-fault detection, vector voltmeter measurements, and EMF assessments—all through a single portable handheld device. The requirement is strictly for the specified system as outlined in the Salient Characteristics, and vendors must demonstrate full compliance through submitted quotes that include pricing, estimated delivery timelines, and supporting technical documentation. This procurement is conducted as a 100% Small Business Set-Aside under NAICS code 334515 for Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a Product Service Code of 6625. All offers must be submitted via email to SSgt Sean-Austin Maguire and SSgt Rebecca Cudjoe by 1:00 PM CDT on 14 August 2026; late or incomplete submissions will not be considered. Questions regarding the solicitation must be submitted in writing via email no later than 1:00 PM CDT on 11 August 2026, and responses will be posted as amendments to SAM.gov. The contract is administered under solicitation number FA481926Q0079 and performance will occur at Tyndall Air Force Base, Florida.

FA4819 325 Cons Pkp

POSTED

about 8 hours ago

DEADLINE

Solicitation # N0038326QBA44

The U.S. government is seeking to procure one multifunction meter under NSN 6625-015654819 through a sole source acquisition from THALES DEFENSE & SECURITY INC, identified as the Original Equipment Manufacturer and the only known source capable of supplying this item. No technical drawings or data are available to the government, and the agency does not hold the rights to produce or source the item elsewhere, making THALES the sole viable supplier. The procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, with no intention to conduct a competitive process unless a capable alternative emerges and submits a Source Approval Request, though such submissions will not delay the process. The requirement is being pursued under FAR Part 13 procedures, excluding commercial item acquisition policies under FAR Part 12, as market research confirms no commercial equivalents satisfy the operational needs. The delivery term is FOB origin, and electronic solicitation via NECO will be used exclusively, with no hard copies or phone requests accepted. Interested parties have until 30 days after the synopsis date to submit capability statements or quotations, but only the designated sole source will be negotiated with unless a viable alternative provides sufficient evidence of capability within the window. The North American Industry Classification System code is 336413, and the procurement is not designated as a small business set-aside. All submissions must be directed via email to the designated contracting officer, Brian C. Furness, with responses due by September 8, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

SERVER,AUTOMATIC DA

Solicitation # N0010426QND82

This contract pertains to the repair of the SERVER, AUTOMATIC DA under solicitation N0010426QND82, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement is governed by emergency acquisition flexibilities and is classified as a rated order under the Defense Priorities and Allocations System, necessitating strict adherence to priority rating provisions. Contractors must submit firm-fixed price quotes for full repair efforts within 120 days of receiving the carcass, including teardown and evaluation costs, repair turn-around time, throughput constraints, and induction expiration dates. All repairs must comply with the original manufacturer’s specifications and technical directives tied to CAGE code 1VQH4 and reference numbers 701829-01 and TI18-S06-2. Items must be marked per MIL-STD-130 Rev N, free of mercury contamination, and packaged according to MIL-STD-2073. Any design, material, or part number changes require prior written approval from the Contracting Officer and must be classified under one of six code designations. The contractor is solely responsible for all inspection, testing, and quality assurance processes, with records maintained for 365 days after final delivery. The contract mandates that only authorized distributors of the original equipment manufacturer may submit offers, requiring documented proof of authorization on company letterhead. Repair quotes must specify all exceptions to solicitation requirements such as packaging, labeling, inspection locations, or surrogate facilities, with failure to disclose exceptions leading to award based solely on stated requirements. The Government reserves the right to inspect and accept all repaired items prior to payment, and final acceptance must occur within the contracted 180-day repair turn-around time. Electronic submission of proposals is required via Wide Area Workflow, and all contractual documents are considered issued upon electronic transmission or mail deposit. Contractors must comply with equal opportunity requirements for veterans and workers with disabilities, small business subcontracting obligations, and security prohibitions outlined in recent federal deviation notices. All documentation provided by the Navy carries distribution restrictions, and any requests for NOFORN or Official Use Only documents must be certified through proper channels. The offer deadline is September 8, 2026, and the award will be issued bilaterally upon contractor acceptance.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

66--PANEL,TEST,ELECTRICAL

Solicitation # SPE7M126T253W

The solicitation seeks three electrical test panels under NSN 6625011444375, with delivery required to DLA Dist San Joaquin within 168 days of award. Only approved sources—1UVW2 GEL400-1 and 78286 65610-03047-041—are eligible to quote, and submissions must be made electronically via the online solicitation portal; hard copies are not available, nor are specifications, plans, or drawings. This is a Small Business Set Aside with total set-aside status under NAICS code 334515, meaning only small businesses can compete. The solicitation number is SPE7M126T253W, posted on August 6, 2026, with quotes due by August 17, 2026. The contracting office is part of the Department of Defense’s DLA Land and Maritime organization based in Columbus, Ohio. All responsible small business sources may submit a quote if received on time, and inquiries must be directed via email to the designated buyer listed in the solicitation document, accessible through the provided SAM.gov link.

DLA Land And Maritime

POSTED

about 8 hours ago

DEADLINE

66--DISPLAY INDICATOR,A

Solicitation # SPE7M126T257N

The contract solicitation seeks two Display Indicators, NSN 6625015637918, to be delivered to DLA Dist San Joaquin by the 168th day following award. The only approved source for this item is 6RE77 P8011Z2110000, and no specifications, plans, or drawings are available for reference. All responsible sources may submit a quote electronically, but hard copies are not accepted. The solicitation is a combined action under RFQ SPE7M126T257N, exclusively set aside for SBA-certified Women-Owned Small Businesses under the WOSB Program, with a NAICS code of 334515. Quotes must be submitted no later than August 17, 2026, and the solicitation is only accessible online through the provided SAM.gov link. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime, with questions directed to the designated point of contact via email.

DLA Land And Maritime

POSTED

about 8 hours ago

DEADLINE

Voltage Detector

Solicitation # Z4943

The voltage detector is a compact, lightweight personal safety device designed to clip directly onto a standard hard hat, weighing less than one ounce and measuring 3.0 by 1.4 by 0.9 inches. It operates on a rechargeable 250 mAh lithium-polymer battery that fully charges in approximately 1.5 hours via a standard USB 2.0 Micro-B (5V) charger and provides up to 80 hours of continuous operation, unless frequent alerts are triggered. The device is built for durability with an IP-67 water resistance rating and functions reliably in extreme temperatures ranging from -20°C to 60°C (-4°F to 140°F), making it suitable for all weather conditions. It detects voltage, electric fields, and magnetic fields with a 360-degree range, even when signals are shielded by nonferrous materials such as earth, enabling detection of buried lines. The device provides directional feedback through a sequence of color-coded LED lights that indicate the location of the field source and includes seven adjustable sensitivity levels to tailor alert thresholds for varying work environments. An adaptive smart mode triggers warnings when ambient electromagnetic fields increase, whether due to movement toward an energized source or changes in field strength. Both audible and visual alerts activate simultaneously, with LED colors identifying the specific type of field detected. The unit also notifies the user when battery levels are low, ensuring continuous operational readiness. This device is procured under solicitation Z4943 by Nashville Electric Service in Tennessee, with responses due by August 12, 2026, and the approved manufacturer part number is SAFEGUARM01012.

Nashville Electric Service

POSTED

about 15 hours ago

DEADLINE

ANALYZER, BLOOD GLUCOSE

Solicitation # SPE2DH-26-T-5819

The contract is for the procurement of Prodigy Pocket Blood Glucose Analyzer Kits, blue in color, which are compact, lightweight, and designed for ease of use without requiring manual coding— Simply inserting a test strip automatically powers the device. The meter requires only a small blood sample, enabling convenient alternate site testing for patients, and delivers accurate results in seven seconds. It stores up to 120 test results with date and time stamps and provides seven, fourteen, and twenty-eight day averages for trend tracking. Each unit is supplied as a kit, with a total quantity of eleven kits ordered under NSN 6630-01-690-1933, and delivery is required within twenty days after award. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with each unit sealed in a protective container and shipped in commercial exterior packaging suitable for safe delivery via common carrier at the lowest cost. The procurement is governed by DLA technical and quality requirements referenced in the DLA Master List, and applicable defense information handling protocols apply. The solicitation number is SPE2DH-26-T-5819, issued on August 5, 2026, with a response deadline of August 12, 2026, and the point of performance is Fort Campbell, with Tina Vu listed as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SENSOR, CURRENT

Solicitation # SPE4A5-26-T-333S

The contract specifies the procurement of a current sensor with NSN 6625-01-560-8737, quantity of one unit, under solicitation number SPE4A5-26-T-333S, with a response deadline of August 13, 2026, and a delivery requirement of 170 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to export control regulations under either ITAR or EAR, meaning any disclosure or transfer of related technical data to foreign persons—even within the U.S.—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. The contract is managed by the Department of Defense’s ASC Supplier OEM Division, with performance occurring in New Cumberland, Pennsylvania, and primary point of contact being Johquin Wiley, reachable via email and phone.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

LENS CLEANING DISK,

Solicitation # SPE8E9-26-T-3372

The contract is for the procurement of 6 lens cleaning disks under NSN 7035-01-613-8030, with a delivery requirement of 167 days from award and FOB origin terms. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements supersede this standard; packaging must be marked and labeled per MIL-STD-129 and palletized according to RP001 DLA Packaging Requirements. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. The contract mandates CMMC Level 2 self-assessment compliance and applies Covered Defense Information protocols. The item is supplied by MOLLEX INCORPORATED DBA MOLEX FIBER with part number 86396-0800, and the unit of issue is each (EA) with zero variance allowed in quantity. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with no tolerance for early shipment. The solicitiation was issued on August 5, 2026, with a response deadline of August 17, 2026, under contract number SPE8E9-26-T-3372, NAICS code 334515, and is managed by the Department of Defense with Matthew Kruc as the primary point of contact.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

29--PUMP,HAND,FUEL PUMP

Solicitation # SPE7L526T4904

The U.S. Department of Defense, through DLA Land and Maritime, is seeking quotations for 294 hand fuel pumps with NSN 2910014705545 under solicitation number SPE7L526T4904, which is a Small Business Set Aside with no small business size standard applied. The procurement is exclusively for responsible sources, and all quotes must be submitted electronically by the deadline of August 17, 2026. Delivery is required to W1A8 DLA Distribution within 153 days after award, and the approved source for this item is 15852 AP00314. The solicitation is issued as a combined solicitation, and no hard copies or detailed specifications, plans, or drawings are available. The North American Industry Classification System code for this requirement is 336310, and inquiries must be directed via email to the designated point of contact at DibbsBSM@dla.mil, with the full solicitation document accessible only through the Sam.gov portal.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

47--HOSE ASSEMBLY,NONMETAL

Solicitation # SPE7M426T320D

The contract solicitation is for the procurement of 11 units of a nonmetal hose assembly with NSN 4720012482251, to be delivered to DLA Distribution Cherry Point within 154 days after order placement. This is a source-controlled item requiring parts to be manufactured exclusively by the approved sources listed as 78570 and 99193, both using drawing number 3886075-2. All supplied items must strictly conform to the technical specifications detailed in the referenced drawing, and digitized versions of the drawing and associated military standards can be accessed electronically. The solicitation, identified as SPE7M426T320D, was posted on August 6, 2026, with quotes due by August 17, 2026, and is exclusively available online through the provided URL; no hard copies are distributed. Submission of quotes is mandatory through electronic means, and all responsible suppliers are invited to respond. The procurement is managed by the DLA Land and Maritime office in Columbus, Ohio, with all inquiries directed to the designated point of contact via email.

Fabric Coating Mills

POSTED

about 8 hours ago

DEADLINE

59--SWITCH,PRESSURE

Solicitation # SPE7M526T374F

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 11 units of the pressure switch with NSN 5930008400253, to be delivered to DLA Distribution Depot Oklahoma within 168 days of award. This procurement is conducted under solicitation number SPE7M526T374F, which was posted on August 6, 2026, with responses due by August 17, 2026. Only approved sources—09049 42D49C and 81205 10-3269-10—are eligible to respond, and all quotations must be submitted electronically through the SAM.gov portal; hard copies are not accepted. No technical specifications, plans, or drawings are provided, and the solicitation is open to all responsible sources that submit timely quotes. The procurement falls under NAICS code 332919 and is managed from the office in Columbus, Ohio. Any questions must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided link or via the DIBBS website using the solicitation number.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

25--LADDER,VEHICLE BOARDIN

Solicitation # SPE7L426T6096

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for three vehicle boarding ladders identified by NSN 2540015932047 under solicitation number SPE7L426T6096. The requirement is for delivery to W1A8 DLA DISTRIBUTION with a mandatory delivery deadline of 168 days after order award. This procurement is issued as a combined solicitation open to all responsible sources, and responses must be submitted electronically via the SAM.gov portal; hard copies are not accepted. Digital access to drawings, military specifications, and standards is provided electronically, and no physical documentation will be furnished. The solicitation was posted on August 6, 2026, with a firm response deadline of August 17, 2026. The NAICS code 332999 applies, indicating the product falls under other fabricated metal product manufacturing. The contracting office is located in Columbus, Ohio, and all inquiries must be directed via email to DibbsBSM@dla.mil, with reference to the buyer listed in Block 5 of the solicitation document, accessible through the provided SAM.gov link or via the DIBBS website by entering the solicitation number. No set-aside classification is designated for this procurement, making it fully open to all qualified offerors.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M426T313T

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for NSN 5330015124594, a gasket, under solicitation number SPE7M426T313T, which is a Small Business Set Aside for total procurement. A total of 36 units are required, each to be delivered to W1A8 DLA DISTRIBUTION within 244 days after award. The approved source for this item is BLUE GYLON 3565, and quotes must be submitted electronically via the SAM.gov portal; hard copies are not accepted. The solicitation, posted on August 6, 2026, has a response deadline of August 17, 2026, and is open to all responsible sources capable of meeting requirements. No specifications, plans, or drawings are available, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link or DIBBS website using the solicitation number. The NAICS code is 339991, and the procuring office is located in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

20--HATCH,RESTRAINT

Solicitation # SPE7M426T311X

The contract seeks the procurement of six hatch restraint units with NSN 2040013050618, to be delivered to DLA Distribution site W1A8 within 168 days after award. Only approved sources—0FB84, 38597, 563J1, and 8X044—all referencing part number 5223513-9—are eligible to submit quotes. The solicitation is issued as an RFQ under number SPE7M426T311X, with no hard copies available; all submissions must be made electronically through the SAM.gov portal. Technical specifications, plans, or drawings are not provided, and responsible sources are invited to quote even without access to detailed documentation. The opportunity is open without set-aside designation and falls under NAICS code 332510 for fabricated metal product manufacturing. The issuing organization is the DLA Land and Maritime office located in Columbus, Ohio, with inquiries directed to the listed primary point of contact via email. Quotes must be received by August 17, 2026, and the solicitation was posted on August 6, 2026.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

43--HOOD ASSEMBLY FIBER

Solicitation # SPE7M126T259W

The procurement is for 3 units of the Hood Assembly Fiber with NSN 4310015843052, to be delivered to W1A8 DLA Dist San Joaquin within 168 days of award. The only approved source for this item is 50GK4 HC15871224, and the solicitation is issued as a Request for Quotation under solicitation number SPE7M126T259W. This acquisition is a Small Business Set Aside, Total, meaning only small businesses are eligible to compete, and it is classified under NAICS code 333912. All responsible sources may submit quotes electronically; hard copies are not available and no specifications, plans, or drawings are provided. Quotes must be submitted by the deadline of August 17, 2026, and the solicitation can be accessed solely through the online SAM.gov portal. The contracting activity is managed by the DLA Land and Maritime office located in Columbus, Ohio, with all inquiries directed via email to the designated point of contact.

Air and Gas Compressor Manufacturing

POSTED

about 8 hours ago

DEADLINE

53--CAP,PROTECTIVE,DUST AN

Solicitation # SPE7M426T317V

The contract solicitation is for 12 units of protective dust caps with NSN 5340010434078, to be delivered to the DLA Distribution Depot Hill within 168 days of award. The approved source is specified as 18740 SK3806-9, and the procurement is conducted through a Request for Quote, with no hard copies available—only electronic submission is permitted. The solicitation, identified by number SPE7M426T317V, is a Small Business Set Aside under NAICS code 332313, meaning only qualified small businesses may respond. All responsible sources may submit quotes if received by the deadline of August 17, 2026, but no specifications, plans, or drawings are provided. The procurement is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact, and the full solicitation document must be accessed electronically through the SAM.gov link provided.

Plate Work Manufacturing

POSTED

about 8 hours ago

DEADLINE

48--VALVE,GLOBE

Solicitation # SPE7MC26T172A

The solicitation seeks six globe valves with NSN 4820011469853 for delivery to DLA Distribution at location W1A8, with a required delivery timeline of 207 days after award. The approved source for this item is vendor 86184 with part number 62715J. This procurement is conducted as a Request for Quotation under solicitation number SPE7MC26T172A, which is exclusively available electronically through the provided SAM.gov link; no hard copies are provided and no specifications, plans, or drawings are included. All responsible sources may submit quotes, but submissions must be made electronically and received by the deadline of August 17, 2026. This is a Small Business Set Aside, total, under NAICS code 332911, intended to prioritize small business participation. The awarding agency is the Department of Defense under DLA Land and Maritime, based in Columbus, Ohio. For questions, interested parties must contact the designated buyer via email at DibbsBSM@dla.mil, as detailed instructions are only accessible through the solicitation’s Additional Information link or via the DIBBS website using the solicitation number.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

48--VALVE ASSEMBLY,MANI

Solicitation # SPE7MC26T180P

The contract pertains to the procurement of two valve assembly, mani units with NSN 4820014939617, to be delivered to W1A8 DLA DISTRIBUTION within 168 days of award. This is a source-controlled item requiring strict adherence to the approved drawing, with only H845-1801-B, identified by source code 96169, authorized for supply. The solicitation, numbered SPE7MC26T180P, is issued as a restricted small business set-aside under NAICS code 332911, and is exclusively available electronically via the provided SAM.gov link; no hard copies are distributed. All quotes must be submitted electronically before the response deadline of August 17, 2026, and must fully comply with the drawing specifications and applicable military standards, which can be accessed digitally through official channels. The procuring agency is DLA Land and Maritime, based in Columbus, Ohio, and designated point of contact for inquiries is listed in the solicitation document under block 5, with email correspondence directed to DibbsBSM@dla.mil.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

25--PARTS KIT,DOOR LIFT

Solicitation # SPE7L326T164S

The contract seeks procurement of a Parts Kit, Door Lift with NSN 2590012121057 under solicitation number SPE7L326T164S, issued by the DLA Land and Maritime under the Department of Defense. A total of 793 units are requested across four line items: 22, 70, and 700 units in kit form (UI KT) to be delivered to DLA Distribution Albany within 157 days, and one unit in individual assembly form (UI EA) requiring delivery within 30 days. All quotes must be submitted electronically, and the solicitation is open to all responsible sources with no restrictions beyond the specified set-aside. This is a Small Business Set Aside designated as total, meaning only small businesses may respond, and it falls under the NAICS code 336992 for other transportation equipment manufacturing. The response deadline is August 17, 2026, and all inquiries must be directed via email to the designated point of contact. The contract office is located in Columbus, Ohio, and performance is to be fulfilled at DLA Distribution Albany regardless of the vendor’s location.

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

16--HOUSING,AIR OUTLET,

Solicitation # SPE7M426T323V

The contract solicitation seeks the procurement of five air outlet housings with NSN 1660015252213, to be delivered to the DLA Distribution Depot in Oklahoma within 168 days after award. The approved source for this item is identified as 99251 1657297-1. This is a competitive RFQ issued under solicitation number SPE7M426T323V, with responses required to be submitted electronically by the deadline of August 17, 2026. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided to offerors. All responsible sources are encouraged to submit quotes, and timely submissions will be considered without restriction. The opportunity falls under NAICS code 336413 and is managed by the Department of Defense through DLA Land and Maritime, with the contracting office located in Columbus, Ohio. Inquiries must be directed via email to the point of contact listed, and further details about the solicitation can be accessed through the provided SAM.gov link.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE