Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Aircraft Exhaust Duct Manufacturing (New Production)

Active

Federal

Response Deadline07/20/2027, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the full-scale manufacture of a newly produced aircraft exhaust duct identified by NSN 2840-01-337-2542PR and Drawing No. 1602M64G07, covering all aspects of production from initial engineering through final delivery. It includes non-recurring engineering efforts, specialized tooling development, and comprehensive qualification testing to ensure the component meets rigorous performance and safety standards. Compliance with MQR-PSD-1 is mandatory, requiring adherence to established quality and procedural controls throughout the manufacturing lifecycle. The work is classified as a subcontract under NAICS code 336412, indicating specialization in aircraft engine and engine parts manufacturing, and is issued by the Department of Defense through DLA Aviation Oklahoma City. All deliverables must be completed and submitted by the response deadline of July 20, 2027, with performance expected to align with defense-specific logistics and technical requirements.

General Info

Manufacture aircraft exhaust duct NSN 2840-01-337-2542PR per DOD contract, due July 20, 2027.

Agency

Department Of Defense → DLA Aviation Oklahoma CityView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 20

Submission deadline

Response Deadline

07/20/2027, 04:00:00 PM UTCin 12 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Aviation Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of a newly produced exhaust duct (NSN 2840-01-337-2542PR, Drawing No. 1602M64G07) including non-recurring engineering, tooling, qualification testing, and compliance with MQR-PSD-1.

Similar Contracts

Same NAICS industry code

F100 - Control Exhaust Nozzle, NSN 2995014502816NZ, P/N 4083931This contract is a spares buy for the F100 Control Exhaust Nozzle with National Stock Number 2995014502816NZ and Part Number 4083931, aimed at procuring essential replacement components for military aerospace systems. The solicitation, identified by number FA812126R0018, was posted on July 28, 2026, with a response deadline of August 12, 2026, at 5:00 PM Eastern Time. There is no set-aside designation applied, meaning the opportunity is open to all qualified contractors without restriction based on business size or other categories. The NAICS code 336412 categorizes this procurement under Aerospace Product and Parts Manufacturing, aligning with the technical nature of the component. The contracting office is located at Tinker Air Force Base in Oklahoma, under the Department of Defense, specifically the FA8121 AFSC PZAAA organization. Primary point of contact for inquiries is Treva Billinger, reachable via email at TREVA.BILLINGER@US.AF.MIL or phone at 405-734-0260. Performance of the contract is expected to be fulfilled at an unspecified location, and all bids must be submitted through the provided SAM.gov portal.

FA8121 Afsc Pzaaa

POSTED

about 11 hours ago

DEADLINE

NSN: 2915-012187655, Rod & Piston, ACTU ; Part Number 2665806:; Qty 266; WSDC 06FThe contract pertains to the procurement of 266 Rod & Piston, ACTU units with NSN 2915-012187655 and part number 2665806, classified as a Critical Safety item requiring a higher-level quality system. Delivery is mandated 167 days after receipt of order to a designated location, with FOB at origin and inspection and acceptance occurring at the destination. The solicitation is issued under an unrestricted solicitation using other than full and open competition and is anticipated to be awarded against the OEM’s Basic Ordering Agreement, with the RFP scheduled for release on or about August 12, 2026, and responses due by September 12, 2026. Offers exceeding $900,000 require a subcontracting plan, while those over $10,000,000 must include certified cost and pricing data in addition to a subcontracting plan. All offerors must be registered in the System for Award Management (SAM) to be eligible for award. Alternate offerors must submit a Source Approval Request package along with a completed solicitation copy to be considered; failure to submit sufficient documentation in time will result in exclusion from this procurement, though approval may qualify them for future opportunities. Award decisions will be based on price, past performance, and other factors assessed through the Supplier Performance Risk System. The procuring activity is DLA Aviation, with primary point of contact Jason Balsiger, and performance will occur in Richmond, Virginia.

POSTED

about 11 hours ago

DEADLINE

28--NOZZLE SEGMENT,TURBThe contract pertains to the procurement of a nozzle segment for a turbine, under solicitation number SPRPA126QYC82, issued by the Department of Defense through the Defense Logistics Agency Aviation in Philadelphia. It mandates strict compliance with federal acquisition regulations including mandatory use of Workflow Pro’s Assist Module, adherence to Buy American Act requirements, and fulfillment of security prohibitions and exclusions effective February 2026. Equal opportunity provisions for workers with disabilities and annual representations and certifications are required, alongside royalty information and priority rating notices for national defense and energy programs. Payment instructions follow the Wide Area Workflow system with combined invoice and receiving report formats, and item identification and valuation must be conducted per JAN 2023 guidelines. The offer response deadline is August 27, 2026, and the primary point of contact is Shawn Frank, reachable via email and telephone at the provided Philadelphia address. The North American Industry Classification System code is 336412, indicating the product falls under turbine and turbine generator set manufacturing.

Pa DLA Aviation At Philadelphia

POSTED

about 11 hours ago

DEADLINE

28--FUEL METERING UNITThe solicitation targets the procurement of a Fuel Metering Unit under NAICS code 336412, with the contract title listed as 28--FUEL METERING UNIT and solicitation number SPRPA126QYC83, issued by the Department of Defense through the PDA Aviation office in Philadelphia, Pennsylvania. The opportunity is open for responses until August 27, 2026, at 8:30 PM, with mandatory compliance required for several federal clauses including the mandatory use of Workflow Pro’s Assist Module, Buy American provisions under the Balance of Payments Program, Security Prohibitions and Exclusions, and the Equal Opportunity for Workers with Disabilities clause. Payment and workflow instructions require integration with the WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS system, referencing specific blocks and sections for invoice and receiving report submission, while also mandating adherence to Item Unique Identification and Valuation requirements. The Buy American Certificate and Alternate A Annual Representations must be submitted, along with Royalty Information and a Notice of Priority Rating for National Defense and Energy Programs, ensuring full regulatory alignment. The contracting office is located in Philadelphia, PA, with primary point of contact available via email and phone for inquiries related to the solicitation. No specific place of performance is detailed in the data, but performance is expected to align with Department of Defense logistics protocols. The solicitation does not specify a set-aside type, indicating it is open to all eligible contractors. All documentation and compliance must be submitted through the designated SAM.gov workspace link, and contractors are required to follow strict procedural and certification guidelines tied to defense supply chain integrity, national security, and federal procurement standards. The inclusion of multiple deviations and updated clauses emphasizes a high compliance burden and underscores the critical nature of accurate documentation and regulatory adherence for award consideration.

Pa DLA Aviation At Philadelphia

POSTED

about 11 hours ago

DEADLINE

F110 ROTOR,COMPRESSOR,AI, NSN: 2840-01-527-6505 PR (AMC 3V)The Government is seeking a rotor compressor assembly designated for use in the F110 engine, identified by NSN 2840-01-527-6505 PR and part number 2214M14G01, with an estimated requirement of 23 units. The solicitation, numbered SPRTA1-26-R-0385, is scheduled to be issued on August 13, 2026, with responses due by September 14, 2026, and delivery is required by September 31, 2027, to location SW3211. This procurement is being conducted under FAR 6.302 as a sole source action, as GE Aviation is currently the only known supplier capable of meeting the technical requirements, and no competition is anticipated unless responses to the notice indicate otherwise. Electronic procedures are mandatory, and all communications must be submitted in writing or via fax; telephone inquiries are not accepted. The acquisition does not follow commercial item procedures under FAR Part 12, though offerors with commercial item capabilities may still submit their interest within fifteen days of the notice. An ombudsman is available to address concerns from potential offerors during the proposal phase, ensuring confidential communication without influencing evaluation or selection. All inquiries should be directed to Breann Irving via email or phone, and solicitation documents will be accessible through sam.gov on the release date.

Ok DLA Aviation At Oklahoma City

POSTED

about 11 hours ago

DEADLINE

in about 2 months

F100 Module Kit, Servo VA, NSN 2915012240747NZ, P/N 351009-ISSAThe contract solicitation FA8121-26-R-0017 seeks spares for the F100 Module Kit, Servo VA with NSN 2915012240747 and part number 351009-ISSA, under a Firm Fixed Price (FFP) arrangement. The requirement calls for the manufacture and delivery of 19 to 57 units with estimated delivery of 36 units under CLIN 0001, plus additional fixed quantities of 2 and 1 units under CLINs 0002 and 0003, respectively. Separate line items demand submission of a First Article Test Plan and First Article Test Report as critical deliverables, ensuring compliance with technical and quality standards. All deliveries must be made F.O.B. ORIGIN, with title and risk of loss transferring at the contractor’s shipping location. The primary point of performance is Tinker AFB, OK, with specific delivery destinations identified in the schedule. Packaging must conform to MIL-STD-2073-1E and marking to MIL-STD-129R, requiring barcoding per MIL-STD-130 using Data Matrix ECC200 symbology compliant with ISO/IEC 15434. Wood packaging must meet ISPM No. 15 standards. Inspection and acceptance occur at origin, governed by clauses 52.246-2 and 52.246-11, with adherence to Pratt & Whitney Visual Inspection Standards and LPR-QPR-018 for nondestructive testing. All work must comply with FAR 46.401(b), 46.503, 47.303-1(c), and DI-NDTI-80089B, and include metallurgical and mechanical test data, photographic records, and remnants from destructive testing. Payment is processed exclusively through WAWF, with invoicing types including invoices, cost vouchers, and progress payment requests. The contract includes mandatory clauses for prompt payment discounts, stop-work orders, inspection of supplies, and commercial product warranties with Alternate I applied. Shipping and marking requirements are strictly enforced per federal standards, with no flexibility for noncompliant packaging or labeling. Suppliers must submit proposals by the deadline of August 12, 2026, using the designated government portal or hand delivery to Tinker A

FA8121 Afsc Pzaaa

POSTED

about 11 hours ago

DEADLINE

Aircraft Insulation Blanket ManufacturingThe contract seeks the manufacture of aircraft cabin insulation blankets compliant with NSN 1680-01-581-8998 and part number 724E4103-32, adhering precisely to the technical requirements established by Triumph Fabrications-St. Louis Inc and the Defense Logistics Agency. The work must meet all specified material, dimensional, and performance standards to ensure compatibility and safety in military aircraft environments. Submission deadlines are set for August 24, 2026, with the solicitation posted on July 27, 2026, indicating a timeline for qualified manufacturers to respond. This transaction is categorized as a subcontract under NAICS code 336412, signaling involvement in aerospace product and parts manufacturing. Performance is expected to support Department of Defense operations overseen by the ASC SUPPLIER OPER AE AND AF DIV, with no set-aside provisions specified, allowing open competition among eligible contractors.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PARTS KIT, FUEL CONTROLThe contract is for a Parts Kit, Fuel Control identified by NSN 2915-00-111-1116 and part number 350810, with a quantity of 34 units to be delivered FOB origin after 778 days, with no variance allowed in quantity. The item is classified as a commercial item and is designated as a critical application item sourced from Honeywell International Inc. Packaging and preservation must strictly comply with MIL-STD-2073-1E Appendix D for kits, requiring all components to be contained in a single box with adequate cushioning to prevent movement and damage. Each kit must include a detailed contents list with NSNs, part numbers, and quantities per kit, and the box must be marked and barcoded in accordance with MIL-STD-129. The delivery destination is the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. All packaging must adhere to DLA Packaging Requirements for Procurement, and palletization must follow specified guidelines. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 for sampling inspection, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and covered defense information applies under RD002. The contractor must remove government identification from non-accepted supplies and physically mark bare items as needed. Technical and quality requirements are incorporated by reference from the DLA Master List, and revision control is determined by solicitation or award dates depending on acquisition type. The purchase request is 7017572897, with an original delivery date of March 19, 2029, and a need ship date of September 21, 2028.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

DOUBLER, CASINGThe contract pertains to the procurement of one doubler casing, part number 1821M93P02, with NSN 2840-01-448-9939, supplied by General Electric Aircraft Engines. The item is to be delivered within five days to Fort Bragg, North Carolina, under FOB origin terms with no tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date or award date. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or another zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The material is not hazardous, has no shelf life, and does not require Unique Item Identification or a Safety Data Sheet. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, with marking conforming to MIL-STD-129 and no special marking codes. Palletization must follow DLA requirements, and shipment must occur via the fastest traceable means, excluding parcel post. Delivery is designated for the U.S. Army Logistics Readiness Center at Fort Bragg, and the contract includes specific freight and marking instructions for government use, with an original required delivery date of July 6, 2026.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

SCREW, LOCK PLATEThe contract specifies the procurement of 18 screw lock plates with NSN 5305-01-626-3828 under solicitation SPE4A6-26-T-09XU, with a delivery deadline of 102 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions controlled based on the solicitation or award date depending on acquisition type. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Bare items require physical marking per RQ017, and export control provisions apply due to the presence of technical data subject to ITAR or EAR regulations, restricting access to authorized parties only, including those with approved JCP certification, completed training, and DLA authorization. Sampling protocols require zero non-conformances under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, unless otherwise stated. The item is classified under NAICS code 336412, and performance is designated for New Cumberland, PA. Primary contact is Ashley Jones-Turner at the Defense Logistics Agency, with solicitations open through August 4, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

DUCT ASSEMBLYThis solicitation, SPE4A5-26-T-309X, is a total small business set-aside for a duct assembly with NSN 2840-01-110-0713, requiring one unit for delivery in 165 days at Tracy, California. Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the Berry Amendment threshold now set at $150,000; any non-domestic materials require full disclosure. The use of additive manufacturing for any item in the offer is prohibited unless specifically approved by the contracting officer, and such offers will be ineligible for award. Offerors are strongly encouraged to provide quantity ranges instead of fixed quantities to accommodate fluctuating demands and avoid administrative delays, though this flexibility does not apply to Auto IDC. Fast Pay is not available for this solicitation. All offerors must certify they will not provide covered telecommunications equipment or services as defined in FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations under FAR provisions 52.212-3 and 52.219-1 for applicable categories. Vendors must register through DLA’s new Account Management & Provisioning System (AMPS) within two months to access the Vendor Shipment Module and maintain shipping capabilities; those using VSM WebServices must update their internal schema immediately. Anticipated late submissions must include a No Bid notice on DIBBS to inform buyers of intent and prevent unnecessary follow-ups. All communications and updates should be tracked through the DIBBS Notices portal, and questions should be directed to the primary point of contact, Hope Scott.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

B-2 Relay Assembly NSN: 5945-01-442-4318FWThis is a sole source spares buy contract for a B-2 Relay Assembly identified by NSN 5945-01-442-4318FW and manufacturer part number 1W025 DAA3233A037-165, issued under solicitation FA811926R0008 by the Department of the Air Force, AFSC PZABC, located at Tinker AFB, Oklahoma. The contract requires delivery of four units of the relay assembly, which functions as an electromagnetic relay board with ESD sensitivity and includes components such as capacitors, resistors, diodes, transistors, integrated amplifiers, circuit boards, and solder. The item must comply with ISO 9001-2015 quality standards and requires Item Unique Identification (IUID) marking per federal requirements. Delivery is to be made F.O.B. Origin to the DLA Distribution Depot Oklahoma at Tinker AFB, with shipping instructions requiring prior coordination with DCMA Transportation for DCMA-administered contracts, and all shipments must adhere to packaging standards outlined in DD FORM 1653 and transportation data requirements from AFMC 158. The contract is subject to the Buy American Act, the Balance of Payments Program, and trade agreement certifications, with offerors required to submit current SAM representations including disclosures on foreign ownership, telecommunications equipment sourcing, and compliance with anti-trafficking and debarment regulations. Proposals must be submitted electronically via email to Jaclyn Christensen, Caleb Taylor, and Jonathan Payne by June 19, 2026, at 3:00 PM CST, and must include a current NIST SP 800-171 DoD Assessment score posted in the Supplier Performance Risk System. Offered prices must remain firm for 120 days, and award will be based primarily on price, with evaluation occurring by aggregating extended prices for the base quantity and any options. The contract incorporates key clauses addressing termination for convenience, default, payment terms, prompt payment discounts, subcontracting, and disputes, and requires invoicing and payment processing through Wide Area WorkFlow with specific DoDAAC codes for routing and acceptance. The government retains the right to inspect and accept goods at origin and may require repair, replacement, or reperformance of nonconforming items at no additional cost, provided actions are taken within a reasonable time and before substantial alteration of the item’s condition

FA8119 Afsc Pzabc

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Aviation Oklahoma City

Same awarding agency

FD2030-27-00115The contract solicitation FD2030-27-00115 seeks a junction box identified by NSN 5975-01-248-9934FG and drawing number 675-22404-501, with technical specifications governed by EDL revision 2 dated 28 JUL 2026 and MDC code NPG. The requirement is managed by the Department of Defense through DLA Aviation Oklahoma City under the NAICS code 335931, targeting specialized electrical components for defense applications. The opportunity was posted on 28 JUL 2026 and proposals must be submitted by 16:00 UTC on 28 JUL 2027, with no specific small business set-aside designated. Victoria K. Wood is listed as the point of contact for administrative matters, and performance is expected to align with broader国防部 logistics requirements, though no specific delivery location is detailed in the public data. All submissions must comply with the technical and procedural standards outlined in the referenced documentation and federal procurement regulations.

Current-Carrying Wiring Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

FD2030-26-02466The contract pertains to the procurement of an aircraft air seal, identified by NSN 2840-01-276-9822NZ and noun SEAL, AIR, AIRCRAFT G, with a top drawing reference of 4071088 and an EDL revision dated March 26, 2026. The MDC code WC9 indicates specific material or manufacturing specifications, and the contract is managed under the name JACKSON, SHERRY A. The official title is FD2030-26-02466, with a corresponding solicitation number GF2030-26-02466, posted on July 27, 2026, and a response deadline of July 27, 2027. The NAICS code 336412 classifies this as aircraft engine and engine parts manufacturing, under the Department of Defense, specifically administered by DLA Aviation Oklahoma City. The procurement falls under a special notice type with no set-aside designation, and the place of performance and point of contact details are not specified.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

FD2030-27-00136The contract under solicitation number FD2030-27-00136 pertains to a Control Assembly, QU, identified by NSN 1680-01-383-7696YQ and governed by TOP DRAWING 68A582101-1005 with an EDL revision dated 24 JUL 2026. The item is classified under MDC code EME and is managed by LAWRENCE, JACEY B. This opportunity is issued by the Department of Defense through DLA Aviation Oklahoma City under NAICS code 336413. The solicitation was posted on 24 JUL 2026 and requires responses no later than 16:00 on 24 JUL 2027. The contract type is listed as a special notice with no set-aside designation applied. Performance location and point of contact details are not provided in the available data. The full solicitation can be accessed via the official SAM.gov workspace link.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FD2030-24-02049-01The contract references a seal component designated by NSN 2840-01-320-6432NZ, classified as a SEAL, AIR, AIRCRAFT G, with the top drawing number 4076459 and an EDL revision dated 19 FEB 2026. The MDC code WAK identifies the manufacturing or maintenance standard applicable to the part, and the IM NAME field lists HANSON-WHEELER, JERRI L as the responsible individual. The contract is identified by the title and solicitation number FD2030-24-02049-01, issued under NAICS code 336412, which corresponds to aircraft engine and engine parts manufacturing. It was posted on 24 JUL 2026 with a response deadline of 24 JUL 2027, and is categorized as a special notice under the Department of Defense, specifically managed by DLA Aviation Oklahoma City. There is no specified set-aside type, and no point of contact or performance location details are provided. The official record can be accessed through the provided SAM.gov link.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

FD2030-27-00078The contract pertains to the procurement of a liner for an augmentor component, identified by NSN 2840-01-190-6881PR and drawing number 5054M24G01, with the latest revision dated 23 July 2026 and MDC code AAL. It is officially titled FD2030-27-00078 and was posted on 23 July 2026 with a response deadline of 23 July 2027, indicating a one-year window for submission. The solicitation is categorized as a special notice under NAICS code 336412, which corresponds to aircraft engine and engine parts manufacturing. The procurement is managed by the Department of Defense through DLA Aviation Oklahoma City, operating under the Sub Command structure, with Jon B Kalsu listed as the point of contact. The place of performance and specific office address details are not provided, and no set-aside classification is stated, suggesting this is an open competition. All relevant documentation and submission instructions can be accessed via the provided SAM.gov link.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

FD2030-27-00133The contract pertains to the procurement of a Torque Limiter Assembly with the National Stock Number 1680-01-148-1999RK, governed by top drawing NF53400-01A and governed by EDL Revision 4 dated 17 August 2022, with an MDC Code of EMF. The solicitation is identified by the contract number FD2030-27-00133 and was posted on 22 July 2026 with a response deadline of 22 July 2027, providing a full year for offers. The procurement falls under NAICS Code 336413, which classifies it within the Aircraft Engine and Engine Parts Manufacturing sector, and is managed by the Department of Defense through the DLA Aviation Oklahoma City office under the Sub Command structure. The point of contact for this solicitation is Lawrence, Jacey B, though no specific address or contact details are listed beyond this name. The place of performance and organizational address information are unspecified in the provided data.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FD2030-26-01947The contract solicitation FD2030-26-01947 seeks support components for a turbine assembly identified by NSN 2840-01-311-9976PR and referenced to drawing 1386M15G15, with technical specifications governed by EDL revision 10 dated 22 JUL 2026 and classified under MDC code ABB. The procurement is managed by the Department of Defense through DLA Aviation Oklahoma City under the NAICS code 336412, indicating a focus on aircraft engine and engine parts manufacturing. The solicitation was posted on 22 JUL 2026 with a response deadline of 22 JUL 2027 at 16:00 UTC, providing a full-year window for offers. The point of contact is listed as NGUYEN, NGUYEN N, and no specific set-aside provisions apply. Performance location and office address details remain unspecified, and the procurement is categorized as a special notice without a defined small business set-aside classification.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

FD2030-26-02101The contract pertains to a duct, fan, aircraft component identified by NSN 2840-01-387-2657NZ and referenced by top drawing 4084856, with the latest engineering drawing revision dated 14 February 2022 and assigned MDC code WGR. The item is under the responsibility of SIMPSON, ANTHONY K and is solicited under contract title FD2030-26-02101, which also serves as the solicitation number. The opportunity was posted on 21 July 2026 and requires responses by 21 July 2027, placing it under a special notice type with no set-aside designation. The North American Industry Classification System code 336412 indicates the procurement relates to aircraft engine and engine parts manufacturing. The awarding agency is the Department of Defense through DLA Aviation Oklahoma City under the SUB COMMAND organizational structure, with no specific place of performance or point of contact details provided, and the full solicitation can be accessed via the SAM.gov workspace link.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Source Approval Request (SAR) Submission & Compliance SupportThis contract supports the end-to-end preparation, management, and submission of Source Approval Requests through the Department of Defense Secure Asset Framework Environment, requiring strict adherence to document control protocols, proper use of Public Key Infrastructure certificates for authentication and security, and ongoing compliance tracking to ensure all submissions meet regulatory and operational standards. The work involves coordinating with multiple stakeholders to maintain accurate records, validate documentation integrity, and ensure timely delivery of SAR packages in alignment with DoD requirements. The contract is classified as a subcontract under NAICS code 541611, with a performance window extending from the posting date of July 20, 2026, through the response deadline of July 20, 2027. It is managed by DLA Aviation Oklahoma City under the Department of Defense and does not specify a set-aside classification or location details. All activities must be conducted in full compliance with federal procurement guidelines and DoD security directives, with emphasis on secure handling of sensitive data and certification validity throughout the submission lifecycle.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Aerospace Packaging, Shipping & Logistics ManagementThe contract requires comprehensive packaging, labeling, and domestic freight delivery services for exhaust ducts destined for Tinker Air Force Base, with all packaging and labeling strictly compliant with MIL-STD-129 standards to ensure military logistics compatibility. The work involves full coordination with the installation’s logistics teams to ensure seamless receipt, tracking, and integration of shipments into base operations. As a subcontract under the Department of Defense, this effort is managed by DLA Aviation Oklahoma City and falls under NAICS code 484121 for truck transportation of freight. The response deadline for submissions is July 20, 2027, and performance must meet all federal defense supply chain requirements for secure, traceable, and timely delivery without disruption to mission-critical activities.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Quality Inspection & Testing ServicesThe contract mandates comprehensive third-party non-destructive testing, material certification, first-article inspection, and compliance testing to ensure the quality of exhaust ducts meets the technical requirements outlined in MQR-PSD-1. All services must be performed by qualified external providers to validate that materials, fabrication methods, and final assemblies adhere to strict mechanical, dimensional, and performance standards without causing damage to the components. Testing protocols must be documented, traceable, and aligned with industry best practices and Defense Department expectations for critical aerospace components. The service is structured as a subcontract under the Department of Defense’s DLA Aviation Oklahoma City office, with the NAICS code 541380 indicating engineering services. The solicitation was posted on July 20, 2026, and responses are due by July 20, 2027, providing a one-year window for submission. While the location of performance is not specified, the work directly supports DoD aviation systems, and compliance with MQR-PSD-1 is mandatory. All deliverables must include certified reports, test data, and traceability records to confirm conformance, with no exceptions allowed for non-compliant hardware.

Testing Laboratories and Services

POSTED

DEADLINE

Technical Data & Engineering Support ServicesThe contract seeks technical data acquisition and interpretation services to support the reverse engineering, design validation, and qualification of an exhaust duct under specification MQR-PSD-1. This includes the analysis and application of critical technical standards such as EDL, MIL-DTL-5007, and ASME Y14.5 to ensure compliance and functional integrity throughout the engineering process. The work is focused on enabling precise reproduction and verification of the exhaust duct’s design using existing military and industry standards, with outcomes directly tied to operational performance and certification requirements. This is a subcontract issued by the Department of Defense through DLA Aviation Oklahoma City, classified under NAICS code 541330 for engineering services. The solicitation was posted on July 20, 2026, with a response deadline set for July 20, 2027, providing a full year for potential offerors to prepare and submit proposals. Performance location details are unspecified, but the work will be performed in support of defense-related aerospace components. There is no set-aside classification indicated, and the contract is open to qualified subcontractors meeting the technical and compliance demands of the scope.

Engineering Services

POSTED

DEADLINE