Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Anton Paar Tribometer

Active

80NSSC26941280QFederal

Response Deadline08/11/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a sole source requirement for an Anton Paar Tribometer, issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The solicitation number is 80NSSC26941280Q, with a posted date of August 5, 2026, and a response deadline of August 11, 2026. The procurement falls under NAICS code 334516, indicating it is for instruments used to measure friction, wear, and other tribological properties. The office is located at Stennis Space Center in Mississippi, while the place of performance is specified as Hampton, Virginia, with a ZIP code of 23681. The primary point of contact for inquiries is Shanna Patterson, reachable via email at shanna.l.patterson@nasa.gov. No set-aside type is designated, meaning the contract is open without restrictions based on business size or other classification. The sole source nature of this requirement indicates that only the Anton Paar Tribometer meets the specific technical needs of the agency for this application.

General Info

Sole source procurement for Anton Paar Tribometer by NASA, deadline August 11, 2026, performance in Hampton, Virginia.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

(3)

SATPC0042332 Statement of Work for Anton Paar TRB3 Tribometer

PDF•sow

NASA NSSC Sole Source Capability Statement for Anton Paar Tribometer

PDF•sources-sought

NASA Sole Source Recommendation for Anton Paar TRB3 Tribometer

PDF•justification-and-authorization

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedAug 5

special-notice

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 12:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts1 person available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

Shanna Patterson

contact@example.gov

Full Description

Show more

** THIS IS A SOLE SOURCE REQUIREMENT ** for Anton Paar Tribometer

Similar Contracts

Same NAICS industry code

Magneto-optical system for quantum sensing and material characterization

Solicitation # FSU-ITN 6846-3

Florida State University is seeking to procure a shared cryogenic magneto-optical spectroscopy platform to advance research in quantum sensing and quantum materials through low-temperature, magnetic-field-dependent optical measurements. The system must support a range of advanced optical techniques including magneto-optical Kerr rotation, photoluminescence, Raman scattering, reflectance and transmission spectroscopy, pump-probe spectroscopy, and optical characterization of quantum emitters. Design priorities include rapid sample exchange, automated temperature and magnetic field sweeps, safe and efficient user training protocols, and dependable operation in a high-traffic, multi-user laboratory environment. The solicitation, identified as FSU-ITN 6846-3, was posted on August 5, 2026, with responses due by August 24, 2026. The project is managed by Stephen J. Talevich and is intended to enhance the university’s capabilities in cutting-edge quantum materials research through a robust, user-accessible instrumentation system.

Florida State University

POSTED

about 12 hours ago

DEADLINE

Procurement and Supply of Electric Soldering IronsThe contract calls for the supply of 112 electric soldering irons identified by NSN 3439013768025, with all items required to meet strict military and federal specifications for performance, safety, and quality. Each unit must be properly packaged and labeled in accordance with applicable hazard communication protocols to ensure safe handling and compliance with regulatory standards. The delivery is structured under FOB origin terms, meaning the buyer assumes responsibility for the items once they leave the supplier’s location, with the final point of receipt being DLA San Diego at ZIP code 92136-3581. The solicitation, issued under the NAICS code 334516 for other commercial and industrial machinery and equipment manufacturing, is classified as a subcontract and was posted on August 5, 2026, with responses due by August 17, 2026. The procuring agency is the Department of Defense through its San Diego office, targeting procurement for defense logistics purposes.

POSTED

about 16 hours ago

DEADLINE

Precision Measurement Equipment SupplyThe contract mandates the supply of eleven precision master levels identified by NSN 5220-01-094-4673 and part number 2117276-001, all of which must fully comply with applicable military specifications. Each unit must be properly packaged and labeled to ensure integrity during transit and to support full traceability throughout the supply chain. Delivery is required FOB origin, with the final destination being Hill AFB, Utah, specifically at the zip code 84056-5734. The procurement falls under the NAICS code 334516, indicating a focus on navigational, measuring, electromedical, and control instruments manufacturing. The opportunity is structured as a subcontract under the Department of Defense, managed by DEPOT HILL, and was publicly posted on August 5, 2026, with responses due by August 17, 2026. All deliveries must meet stringent quality and documentation standards to satisfy defense logistics requirements.

POSTED

about 16 hours ago

DEADLINE

Supply of Electric Soldering Irons (NSN: 3439016532189)The contract involves the procurement and delivery of 94 commercial off-the-shelf electric soldering irons identified by NSN 3439016532189, required to meet specific brand, packaging, and technical standards set by the Defense Logistics Agency. These items are intended for use by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY, with performance to be fulfilled at the location in NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. The solicitation is issued as a subcontract under NAICS code 334516, indicating classification within electronic component and product manufacturing. The opportunity was posted on August 5, 2026, with a firm response deadline of August 17, 2026, at 17:00 UTC, requiring vendors to submit proposals that comply with all technical and administrative requirements outlined by the agency. Though no set-aside designation is specified, the procurement is open to eligible contractors capable of fulfilling the quantity and conformity criteria without deviation.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

TUBING, LYSE, ANALYZE

Solicitation # SPE2DH-26-T-5629

The contract specifies the procurement of one unit of tubing for lysing and analyzing in hematology systems, manufactured by Beckman Coulter Inc. with part number 6805686 and NSN 6630-01-525-5546, under solicitation SPE2DH-26-T-5629. The item is classified as a regulated medical device by the FDA and requires the contracting official to submit a referral via EBS with full bidder and manufacturer details for validation. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper labeling, protection from damage, and safe delivery via common carrier to the destination at the lowest cost. The delivery is FOB destination within 20 days, with no tolerance for quantity variance, and inspection and acceptance occur upon arrival. The item is subject to DLA’s Master List of Technical and Quality Requirements and applicable defense information handling protocols. The unit of issue is one each, priced at $1.00, with the point of performance listed as Fort Bliss, Texas, and primary contact information provided for inquiries.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 16 hours ago

DEADLINE

MEASURING TUBE, GAS

Solicitation # SPE2DH-26-Q-0096

The contract specifies the procurement of measuring tubes for a gas analyzer designed to measure carbon monoxide content in compressed gases, with a measurement range of 5 to 150 parts per million. Each tube is round with sealed tips, and they are provided in packages of ten, with the unit of issue being a box containing ten tubes. The item is identified by NSN 6630-12-189-3125, and the order quantity is three boxes. The tubes must comply with stringent technical and quality requirements referenced in the DLA Master List, and the packaging must meet DLA’s procurement standards, including commercial packaging requirements and the Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be sealed to prevent damage and packed in exterior shipping containers suitable for safe transport at the lowest freight rate to the delivery point. The item has a non-extendable shelf life of 24 months, and no more than three months may have elapsed between the date of manufacture and the date of delivery to the government. Labeling requirements mandate the inclusion of the date of manufacture, expiration or retest date, and the contract or lot number in accordance with the latest revision of MMS1C. Shelf-life markings and all packaging must adhere strictly to these standards. The solicitation, issued under contract number SPE2DH-26-Q-0096, requires responses by August 10, 2026, with delivery expected within 30 days after delivery order. The contracting office is part of the Department of Defense’s Medical Supply Chain, and all provisions regarding defense information, government identification removal, and packaging compliance are fully applicable.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 16 hours ago

DEADLINE

LEVEL, PRECISION, MASTER

Solicitation # SPE8E5-26-T-3799

This contract, issued under solicitation SPE8E5-26-T-3799 by the Department of Defense through DLA Distribution Depot Hill, specifies the procurement of 11 units of material identified by NSN 5220-01-094-4673 and part number 2117276-001, supplied by BAE Systems National Security. The unit price is $11.00 per EA, with a total price of $121.00, and delivery is required in 167 days FOB origin at Hill AFB, Utah. Inspection and acceptance both occur at destination, with zero variance allowed in quantity. The items must be packaged in compliance with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001. Government identification must be removed from non-accepted supplies, and all packaging must align with MIL-STD-130N for identification marking. The contract includes specific transportation instructions per DLAD Proc Notes C19 and C20, with the designated shipping address and parcel post address clearly defined. The contract references Covered Defense Information under RD003 and incorporates technical and quality requirements identified by R or I numbers from the DLA Master List, with the applicable revision determined by the solicitation issue date for large acquisitions. The unit of issue is EA, and the procurement follows DoD authorized standards, with ANSI X12 equivalents accessible via a provided URL. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 334516. The primary point of contact is Brandon Wicker, reachable via email and phone. The original required delivery date is March 24, 2027, with a need ship date of February 1, 2027, and all performance is governed by the contractual terms, including the specified delivery location, inspection protocols, and packaging directives governed by DLA standards.

POSTED

about 16 hours ago

DEADLINE

GAGE, PLUG, PLAIN CYL

Solicitation # SPE8E9-26-T-3308

This contract is for the procurement of 13 plain cylindrical plug gages, identified by NSN 5220-00-981-7124 and part number 5431-14 from WINCHESTER INTERCONNECT CORPORATION, under solicitation SPE8E9-26-T-3308. The item is classified as a critical application item and must comply with stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the gages unless explicitly exempted for functional uses like batteries, sensors, or instruments specified by NAVSEA, and any permitted mercury-containing components must include shockproof design and a secondary containment as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific preservation, wrapping, and container standards, and labeling must follow MIL-STD-129 without special markings. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the quantity variance is strictly zero percent. The required delivery date is 167 days after award, with an original need date of February 5, 2027, and the items must be shipped to the DLA Distribution Center in New Cumberland, Pennsylvania. The contract enforces all applicable DLA packaging and transportation directives, including RP001 and DLAD Proc Notes C19 and C20, and the unit of issue is each, priced at $13.00 for a total value of $169.00.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

High-Precision Surveying Instrument SupplyThe contract calls for the supply of a commercial-grade Scanning Total Station equipped with advanced 3D laser scanning, robotic tracking, and extended-range wireless control capabilities, all designed to meet rigorous performance standards for angular precision, scanning speed, and operational range. The instrument must support high-fidelity data collection in demanding field environments and fulfill specific technical benchmarks established by the requesting agency to ensure compatibility with existing surveying protocols and mission-critical infrastructure projects. The procurement is issued as a subcontract under NAICS code 334516 by the Department of Defense through the W6QK Acc-Apg Adelphi office, with performance required at Adelphi, Maryland, ZIP 20783. The solicitation was posted on August 5, 2026, and responses are due by August 19, 2026, at 7:30 AM. This opportunity is not subject to any set-aside designations, and the delivery of the fully compliant instrument must be completed within the specified timeframe to satisfy operational readiness requirements for defense and geospatial surveying applications.

W6QK Acc-Apg Adelphi

POSTED

about 21 hours ago

DEADLINE

Blots and Gels Imaging System SupplyThe USDA Agricultural Research Service is seeking to procure a commercial off-the-shelf Blots and Gels Imaging System for use in agricultural research at the U.S. Dairy Forage Research Center located in Clay Center, Nebraska, with a zip code of 68933. This subcontract is issued under NAICS code 334516, which pertains to laboratory analytical instrument manufacturing, indicating the need for a specialized, ready-made imaging solution capable of supporting molecular biology applications such as protein and nucleic acid detection. The system must meet the technical and operational requirements necessary for high-throughput, accurate imaging in a research environment focused on dairy and forage science. The solicitation was posted on August 5, 2026, with proposals required to be submitted no later than August 14, 2026, at 4:59 AM Eastern Time. The contract does not specify a set-aside designation, meaning it is open to all qualified small and large businesses without restriction. The place of performance is strictly limited to the research facility in Clay Center, and deliveries or installations must be coordinated to occur at this location. The contract aims to enhance the center’s capability to analyze biological samples, supporting ongoing studies in animal nutrition, plant genetics, and biotechnology relevant to sustainable dairy production.

USDA Ars Afm Apd

POSTED

about 21 hours ago

DEADLINE

Portable Aerosol Particle Counter

Solicitation # FDA-RFQ-135363

The FDA Office of Acquisition Grant Services under the Department of Health and Human Services is seeking a Portable Aerosol Particle Counter to support regulatory testing activities, as outlined in solicitation number FDA-RFQ-135363 posted on August 5, 2026. The requirement is classified under NAICS code 334516 and is open to all interested vendors without a specific set-aside. Proposals must be submitted by August 17, 2026, at 5:00 PM Eastern Time, with the primary point of contact being Roosevelt Walker, reachable at roosevelt.walker@fda.hhs.gov. The contract will be performed at a location in Winchester, Massachusetts, with a zip code of 01890, while the issuing office is located in Rockville, Maryland, 20852. Interested parties can access further details through the provided SAM.gov website link.

FDA Office Of Acq Grant Svcs

POSTED

about 21 hours ago

DEADLINE

Hot Disk Thermal Constants Analyzer Model TPS 2200

Solicitation # 80NSSC26938429Q

This procurement is for the Hot Disk Thermal Constants Analyzer Model TPS 2200, a brand-specific requirement set aside exclusively for small businesses under a Small Business Set Aside – Total designation. All submissions must include proof of pricing directly from the manufacturer and written confirmation of authorization to resell the specified equipment, ensuring compliance with the brand name justification. Quotes must clearly state net 30 payment terms, FOB Destination delivery, the vendor’s CAGE Code and UEI number, and the anticipated delivery lead time or ARO. Shipping costs must be itemized if applicable, and any applicable discounts should be applied directly to the quoted price. Payment will not be processed via credit card. The solicitation number 80NSSC26938429Q must be referenced in all communications. The request is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance to occur at Stennis Space Center, Mississippi. Responses are due by August 12, 2026, at 7:00 PM Eastern Time, and inquiries should be directed to Laura Quave or Karen Artis.

NASA Shared Services Center

POSTED

about 21 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Power Management and Surge Protection SupplyNASA Shared Services Center is seeking qualified small businesses to supply power distribution units and UL-listed surge protection devices designed to ensure the safe and reliable operation of audiovisual and networking equipment. The solicitation is a Small Business Set Aside under NAICS code 335313, restricting eligibility to small business concerns as defined by the SBA. All awarded products must meet UL safety standards and be capable of supporting critical infrastructure in a high-reliability environment. The opportunity was posted on August 5, 2026, with proposals due by August 11, 2026, at 9:00 PM Eastern Time. The place of performance is specified as 94035, indicating delivery and deployment will occur at a NASA facility in that zip code area. Submission must comply with all technical and compliance requirements outlined in the solicitation to be eligible for award.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

Cable, Rack, and Physical Infrastructure SupplyNASA’s Shared Services Center is seeking small business vendors to supply HDMI and XLR signal cables, fiber optic patch cables, conduit, and 12U rack enclosures for integration into the audiovisual system within NASA’s Ballroom. The contract is designated as a Small Business Set Aside with no competition restrictions for firms meeting SBA size standards, under NAICS code 335931 for other electrical equipment and component manufacturing. All materials must meet technical specifications required for mission-critical AV performance, with delivery and installation expected to occur at a location in 94035. Vendors must submit proposals by August 11, 2026, at 9:00 PM ET, and the solicitation was posted on August 5, 2026. This is a subcontract opportunity, meaning the selected supplier will be working under the authority of NASA’s infrastructure teams to support AV system deployment and functionality.

Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Networking and Data Infrastructure Hardware SupplyNASA Shared Services Center is seeking a small business to supply enterprise networking hardware for AV and data transport applications, specifically managed switches, SDI-to-fiber converters, and unified network appliances. The contract is structured as a subcontract under a Small Business Set Aside, meaning only eligible small businesses may bid, and the North American Industry Classification System code 334290 applies to other communications equipment manufacturing. The opportunity was posted on August 5, 2026, with a response deadline of August 11, 2026, at 9:00 PM ET. Performance will be centered at a location with a zip code of 94035, though no specific city or state is listed. All equipment must meet the technical requirements for high-performance, reliable transport of audiovisual and network data within a mission-critical infrastructure environment.

Other Communications Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Lighting and Control Systems SupplyNASA’s Ballroom events and presentations will be supported through the supply of LED moving head stage lights and lighting control consoles under a small business set-aside subcontract. The opportunity is posted under NAICS code 335129 and is exclusively available to small businesses, with responses due by August 11, 2026. The equipment must be delivered and installed at the designated place of performance in Moffett Field, California, zip code 94035, to ensure seamless integration into NASA’s existing event infrastructure. The contract aims to enhance visual engagement during official presentations and public events by providing professional-grade lighting systems that meet operational and technical standards for dynamic stage performances. While specific technical requirements are not detailed here, bidders are expected to propose solutions capable of consistent performance in a controlled environment with high visibility and precision control needs.

Other Lighting Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Video and Display Technology SupplyNASA’s Ballroom AV Upgrade requires the supply of high-resolution video equipment including NDI encoders, HDMI matrices, and 65-inch 4K LED displays to enhance audiovisual capabilities in a mission-critical facility. The contract is structured as a subcontract under a Small Business Set Aside designation, ensuring eligibility and preference for qualified small businesses as defined by the SBA. The North American Industry Classification System code 334310 confirms the scope falls under broadcast and video equipment manufacturing. All work must be performed at a location with the zip code 94035, aligning with NASA’s designated operational site. The solicitation was posted on August 5, 2026, with a firm response deadline of August 11, 2026, at 9:00 PM Eastern Time, leaving a narrow window for qualified providers to submit their proposals. The contracting activity is managed by the NASA Shared Services Center under the National Aeronautics and Space Administration, which will evaluate submissions based on technical capability, compliance, and small business status.

Audio and Video Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Professional Audio Equipment SupplyNASA’s Ballroom at Ames Research Center is seeking professional-grade audio equipment through a Small Business Set Aside subcontract, with the procurement aimed at enhancing audio capabilities for institutional use. The contract calls for the supply of wireless transmitters, digital mixers, audio processors, and ceiling array microphones, all of which must meet high industry standards to support clarity, reliability, and scalability in a critical federal facility. The opportunity is classified under NAICS code 334310, which pertains to audio equipment manufacturing, and is restricted to small businesses as defined by the Small Business Administration, ensuring compliance with federal contracting goals for small business participation. The solicitation was posted on August 5, 2026, with a strict response deadline of August 11, 2026, at 9:00 p.m. Eastern Time, leaving a narrow window for interested vendors to submit proposals. Performance of the contract will be situated at the Ames Research Center in Moffett Field, California, with a zip code of 94035, and the managing agency is the NASA Shared Services Center under the National Aeronautics and Space Administration. While no point of contact is listed, interested parties must engage through the official SAM.gov portal using the provided link to access full solicitation details and submit required documentation before the deadline.

Audio and Video Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Presentation Storytelling training for NASA CSP and SCaN office

Solicitation # 80NSSC26938494Q

This contract solicitation, identified by Notice ID 80NSSC26938494Q, is for Presentation Storytelling training services targeted at NASA’s CSP and SCaN offices, with all proposals required to reference this notice in their correspondence. The procurement is exclusively set aside for small businesses under the SBA Small Business Set Aside – Total category, and the NAICS code 611430 applies to the nature of the training services. All quotes must include net 30 payment terms, FOB Destination delivery conditions, the vendor’s CAGE Code and UEI number, and the proposed delivery time or lead time. Shipping costs, if applicable, must be clearly stated, and any available discounts should be applied to the quoted price. Payment will not be processed via credit card, and vendors must supply all required details in their submission to meet compliance standards. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 9:00 AM, and performance will be coordinated through the NASA Shared Services Center located at Stennis Space Center, Mississippi. Primary point of contact is Laura Quave, with secondary support from Karen Artis.

Professional and Management Development Training

POSTED

about 21 hours ago

DEADLINE

RAVEN PRO COMPRO Annual Lease

Solicitation # 80NSSC26940810Q

NASA Shared Services Center is seeking renewal of the COMPRO/RAVEN PRO and COMPRO 1 Core licenses along with associated post-installation technical support hours under the RAVEN PRO COMPRO Annual Lease. This action is not a request for quotes but a formal procurement notice requiring responses that align with the statement of work and capability documentation provided. All communications must include the solicitation number 80NSSC26940810Q in the subject line to ensure proper tracking and visibility. The opportunity is posted for a special notice with no set-aside designation, under NAICS code 513210, and is managed by the National Aeronautics and Space Administration out of Stennis Space Center, Mississippi, with performance required in Hampton, Virginia. The deadline for responses is August 7, 2026, at 9:00 PM Eastern Time, and inquiries should be directed to Lindsey McLellan or Bobbie Young, the designated points of contact.

Software Publishers

POSTED

about 21 hours ago

DEADLINE

DDN Annual Support Renewal

Solicitation # 80NSSC26941024Q

This solicitation is for the annual support renewal of DDN systems under a brand name requirement, exclusively open to authorized resellers who must provide verifiable proof of pricing directly from the manufacturer and confirm their official authorization to resell the listed items. All bids must include the vendor’s CAGE/UEI code, specify FOB destination as Hampton, Virginia, and clearly state the lead time for delivery. The point of contact for this opportunity is Shanna Patterson, reachable at shanna.l.patterson@nasa.gov, and vendors must reference the tracking number 80NSSC26941024Q in the subject line of all submissions. This is a Small Business Set Aside with a NAICS code of 513210, managed by the NASA Shared Services Center, and payment will not be processed via credit card. The response deadline is August 11, 2026, with the solicitation posted on August 5, 2026, and performance required at Hampton, Virginia, 23681.

Software Publishers

POSTED

about 21 hours ago

DEADLINE

JEOL JNM-ECZL400S Spectrometer

Solicitation # 80NSSC26940919Q

NASA/NSSC is seeking to procure the JEOL JNM-ECZL400S Spectrometer through a sole source contract awarded to JEOL USA, INC., as it is the sole provider of this specific instrument. The acquisition is being conducted under FAR 12.102(a) as a commercial item purchase, with performance located at NASA’s Glenn Research Center. The North American Industry Classification System code for this procurement is 334516, and the contract is classified as an 8(a) Sole Source under FAR 19.8. Interested parties may submit written capabilities and qualifications by 3:00 p.m. Central Standard Time on August 10, 2026, to support the government’s determination on whether to proceed without full and open competition; oral communications are not accepted. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and the Center Ombudsman information is publicly accessible. The primary point of contact for this solicitation is McKenzie Hanson, Procurement Specialist, reachable at McKenzie.M.Hanson@nasa.gov, with Karen Artis listed as a secondary contact. The solicitation number is 80NSSC26940919Q, posted on August 5, 2026, with the response deadline set for August 10, 2026, at 8:00 p.m. Eastern time.

Analytical Laboratory Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

Audiovisual and networking hardware upgrade

Solicitation # 80NSSC26940747Q

This contract is for an audiovisual and networking hardware upgrade under a Small Business Set Aside, with the solicitation number 80NSSC26940747Q, issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Only authorized resellers or distributors of the original equipment manufacturers listed in the Statement of Work are eligible to respond, and all offerors must provide documented proof of pricing directly from the manufacturer along with formal confirmation of their authorization to resell the specified items. Failure to submit this documentation will result in disqualification. The contract is set for performance in California, with a response deadline of August 11, 2026, and all communications must include the solicitation number in the subject line to ensure proper handling. The opportunity is open to small businesses as defined by the SBA, and inquiries should be directed to the primary point of contact, Lindsey McLellan, at the provided email address.

Other Computer Related Services

POSTED

about 21 hours ago

DEADLINE