Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ARMOR PLATE

Active
SPE8E4-26-T-2037Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 10 units of ARMOR PLATE with NSN 9535-01-737-6312 under solicitation SPE8E4-26-T-2037, issued by the Department of Defense through the DDSP New Cumberland Facility. The unit price is $10.00 per item, resulting in a total contract value of $100.00, with no variance allowed in quantity. Delivery is required FOB origin within 164 days of contract award, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and the shipment must be delivered to the specified parcel post address in New Cumberland, Pennsylvania. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and applies to Covered Defense Information. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract is tied to a Federal NAICS code 332313 and was posted on August 9, 2026, with responses due by August 20, 2026. The original required delivery date is February 5, 2027, with a need ship date of February 1, 2027. Point of contact for the contract is Pamela Duffey, reachable via email and phone.

General Info

Procurement of 10 ARMOR PLATE units at $10 each, FOB origin, delivery by Feb 5, 2027, CMMC Level 2 required.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332313 - Plate Work ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-2037 for DLA Troop Support Metals

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Pamela Duffey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ARMOR PLATE
ARMOR PLATE
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
GENERAL DYNAMICS LAND SYSTEMS INC. 01417 P/N LS1155355
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758307 0001 EA 10.000
NSN/MATERIAL:9535017376312
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPE8E4-26-T-2037
SECTION B
PR: 7017758307 PRLI: 0001 CONT’D
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:BG CUSH/DUNN THKNESS:C
UNIT CONT:EC OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:02/05/2027
SPE8E4-26-T-2037 NSN/Part Number: 9535-01-737-6312 Quantity: 10 EA Purchase Request: 7017758307QTY: 10 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332313
New
DIBBS
ARMOR PLATE
Solicitation # SPE8E4-26-T-2040
The contract pertains to the procurement of ARMOR PLATE with NSN 9535017376339 and part number LS1155575, under solicitation SPE8E4-26-T-2040, requiring delivery of ten units within 164 days from the award date. The item is to be delivered FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization in accordance with DLA standards. The delivery address is the DDSP New Cumberland Facility in Pennsylvania, with the need ship date set for February 1, 2027, and the original required delivery date as February 5, 2027. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment since Covered Defense Information applies. All documentation and source approval submissions must follow the specified procedures, including RC001 for SAR and RQ011 for removal of government identification from non-accepted supplies. Pricing is set at $10.00 per unit for a total of $100.00, with payment terms linked to the CLIN structure. The contract was posted on August 9, 2026, with a response deadline of August 20, 2026, under NAICS code 332313, managed by the Department of Defense through the DDSP New Cumberland Facility, with Pamela Duffey as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332313
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-2038
This contract specifies the procurement of an aluminum alloy plate made from high magnesium aluminum, measuring 0.250 inches thick, 48.00 inches wide, and 240.00 inches long, with a reference weight of 276.48 pounds per unit. The material must conform to the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, specifically referencing ASTM B928/B928M-15 Revision 2023, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23, alongside DLA reference drawings and quality assurance procedures. The plate must be supplied in whole-foot lengths only and meet exact dimensional tolerances with no test coupons permitted. All units must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer name, heat and lot number, and dimensions, applied via stamping or stenciling using non-contaminating, waterproof, and durable methods. Adhesive labels are permitted for smaller items under 0.250 inches nominal diameter. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support requirements for FSG 95 and 96; only approved QSLD suppliers are eligible for award, and any deviation from this requirement must be explicitly declared. Compliance with the QSL program waives certain inspection requirements such as COQC, PVT, and QAP-EQ003, subject to exceptions for Foreign Military Sales. A Certificate of Quality Compliance, or mill-material certification, is mandatory and must accompany each shipment and be forwarded to the contracted DLA Troop Support officer. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, with preservation and marking codes ZZ and Z applied as specified. The delivery is FOB origin with a required delivery date of December 9, 2026, for 15 units, subject to zero quantity variance. The contract is a total small business set-aside under NAICS code 332313, with all shipments directed to the DLA San Joaquin Distribution Center in Tracy, California, and must include dual-unit markings if applicable. Noncompliance with any requirement, including marking, packaging, or supplier
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332313
New
DIBBS
ARMOR PLATE
Solicitation # SPE8E4-26-T-2039
The contract pertains to the procurement of 10 units of ARMOR PLATE with NSN 9535-01-737-6349 and part number LS1155574 under solicitation SPE8E4-26-T-2039, issued by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered FOB origin within 164 days of contract award, with a required ship date of February 1, 2027, and an original delivery deadline of February 5, 2027. The quantity is fixed at 10 units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specified methods for preservation, wrapping, cushioning, and unit containers, and all marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging requirements, and transportation details are governed by DLAD procedural notes C19 and C20. This procurement is subject to cybersecurity compliance requirements under the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, with covered defense information applicable, necessitating adherence to established cybersecurity controls. Technical and quality standards referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. Documentation requirements for source approval requests and the removal of government identification from non-accepted supplies must also be followed. The unit of issue is each (EA), priced at $10.00 per unit, totaling $100.00. The contract is classified under NAICS code 332313, and the point of contact is Pamela Duffey, with additional administrative oversight from Aaliyah Nuriddin. The procurement is managed through the DIBBS system with the official solicitation link provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332313
New
DIBBS
FLOOR, BODY, VEHICULAR
Solicitation # SPE7L3-26-T-169T
The contract solicitation SPE7L3-26-T-169T calls for 20 units of a vehicular floor and body component identified by NSN 2510-01-598-1372, with a delivery deadline of 165 days after award. The requirement is subject to stringent technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect at the solicitation issue date. The contractor must be certified as a Cybersecurity Maturity Model Certification (CMMC) Level 2 Third-Party Assessment Organization, ensuring adherence to robust cybersecurity protocols. Quality control demands include configuration change management through Engineering Change Proposals and formal requests for variance, along with inspection and acceptance at origin. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating strict qualification compliance. Technical data associated with this procurement is subject to export controls under ITAR or EAR, restricting access and disclosure to authorized personnel only; contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and receive explicit DLA approval to handle controlled data. All foreign nationals, regardless of location or employer, are subject to these restrictions. Delivery performance is mandated at the specified location in New Cumberland, PA, with Viviane Kounkorgo designated as the primary point of contact for procurement inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332313
New
Federal
Supply of Parking-Related Materials and EquipmentThe contract is for the supply of parking-related materials and equipment, including bollards, gates, signage, and pavement markings, to be installed and maintained at Veterans Affairs parking facilities across Illinois. The work falls under NAICS code 332313, indicating it involves the manufacturing of metal structural components typically used in infrastructure, and is designated as a subcontract opportunity. All materials must meet specified standards for durability and compliance with federal facility requirements, and the successful vendor will be responsible for timely delivery and coordination of installation activities at multiple VA locations throughout the state. The solicitation was posted on August 7, 2026, with a response deadline of September 1, 2026, at 11:00 AM. The contract is managed by the 252-NETWORK Contract Office 12 under the Department of Veterans Affairs, and performance is limited to facilities located in Illinois. There is no set-aside designation, meaning the opportunity is open to all eligible suppliers regardless of business size or ownership type. Vendors must ensure compliance with federal procurement regulations and be prepared to support ongoing maintenance needs as part of the scope, with no specified point of contact provided for pre-submission inquiries, requiring full reliance on the official SAM.gov link for additional details.
252-NETWORK Contract Office 12 (36C252)

POSTED

2 days ago

DEADLINE

in 23 days
View Details
NAICS: 332313
New
SLED
Commercial Supply of WashersDallas Area Rapid Transit is seeking commercial suppliers to provide flat washers measuring 1/2 inch with a zinc yellow finish, packaged in quantities of 10 each, under a subcontract agreement. The solicitation was posted on August 6, 2026, with a response deadline of August 11, 2026, at 7:00 PM. The NAICS code 332313 identifies the product category as other hardware manufacturing, indicating the focus is on standardized metal components. There is no set-aside designation specified, and the performance location and point of contact details are not provided. All responses must be submitted through the designated online portal at the provided link, and the contract anticipates delivery of the specified washers in compliance with the defined packaging and finish requirements.
Dallas Area Rapid Transit

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332313
New
SLED
Commercial Supply of Fasteners and HardwareThe contract titled Commercial Supply of Fasteners and Hardware involves the procurement of standard industrial hex bolts measuring 1/2-13 x 1 inch, rated Grade 8 with a zinc yellow finish, delivered in standardized packages of ten units each. This is a subcontract opportunity issued by Dallas Area Rapid Transit under the NAICS code 332313, with a posted date of August 6, 2026, and a firm response deadline of August 11, 2026, at 7:00 PM. The work is to be performed in Texas, though no specific city or address is provided for performance or contact details. The solicitation does not specify a set-aside type or additional eligibility requirements, leaving participation open to qualified suppliers without preferred status designations. Interested vendors must submit responses prior to the deadline through the referenced online portal to be considered for award.
Dallas Area Rapid Transit

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332313
New
Federal
Fencing Materials Supply
National Operations Center

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332313
New
Federal
53--CAP,PROTECTIVE,DUST AN
Solicitation # SPE7M426T317V
The contract solicitation is for 12 units of protective dust caps with NSN 5340010434078, to be delivered to the DLA Distribution Depot Hill within 168 days of award. The approved source is specified as 18740 SK3806-9, and the procurement is conducted through a Request for Quote, with no hard copies available—only electronic submission is permitted. The solicitation, identified by number SPE7M426T317V, is a Small Business Set Aside under NAICS code 332313, meaning only qualified small businesses may respond. All responsible sources may submit quotes if received by the deadline of August 17, 2026, but no specifications, plans, or drawings are provided. The procurement is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact, and the full solicitation document must be accessed electronically through the SAM.gov link provided.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332313
New
DIBBS
Mounting Plate Supply and Delivery
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 332313
New
DIBBS
Supply of Industrial Butt Hinge (NSN: 5340002055914)
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 332313
New
DIBBS
Cotter Pin Manufacturing and SupplyThe contract requires the manufacture and delivery of 93 precision cotter pins conforming to military specification NASM24665-162 and drawing 13873 EI-002341860, ensuring strict adherence to material, dimensional, and functional standards necessary for aerospace applications. All components must meet rigorous quality and performance criteria to guarantee reliability in high-stress military and defense environments. The work is designated as a subcontract under NAICS code 332313, indicating classification within the forgings and stampings industry segment, with performance required at a location in Jacksonville, Florida, zip code 32212-0103. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The contract does not specify a set-aside type or small business preferences. Interested parties must respond via the DIBBS platform using the provided RFQ link. Compliance with all technical specifications and delivery timelines is critical, as the cotter pins are essential for the assembly and operational integrity of aerospace systems under military use.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling
Other Scientific and Technical Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332312
New
DIBBS
Precision Cutting and Kitting Services
Fabricated Structural Metal Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
Cold-Finished Steel Flat Bar Supply
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
Rubber Seals and Gaskets Supply
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to hazardous materials compliance standards, focusing on the preparation of Safety Data Sheets, accurate application of hazard warning labels in accordance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, and full alignment with MIL-STD-129 packaging and labeling requirements. All documentation and labeling efforts must ensure regulatory compliance for defense-related shipments, with an emphasis on safety, accuracy, and consistency across all hazardous material handling processes. The work is tied to the Department of Defense’s New Cumberland facility, with performance expected at the zip code 17070-5002, under a subcontract arrangement governed by NAICS code 541690. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, indicating a tight turnaround for qualified vendors to submit proposals meeting the detailed technical and regulatory specifications.
Other Scientific and Technical Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract requires the provision of military-compliant packaging, preservation, and continuous identification marking for copper alloy bars in full compliance with MIL-STD-2073-1E, MIL-C-3993, and MIL-STD-129 standards. Each package must be accurately labeled with the National Stock Number, contract number, applicable specification, and heat or lot traceability information to ensure full accountability and supply chain integrity. The work must be performed to exacting military specifications, ensuring that materials are protected from environmental degradation and are consistently identifiable throughout their lifecycle. The solicitation is issued as a subcontract under the NAICS code 561910 by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at the location in New Cumberland, Pennsylvania, ZIP 17070-5002. Responses are due by August 20, 2026, and the opportunity was posted on August 9, 2026. All deliverables must adhere strictly to regulatory requirements to meet defense logistics and inventory control standards.
Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Copper Alloy Metal Bar SupplyThe contract calls for the supply and delivery of 108 feet of copper alloy 630 metal bar, with a tolerance of plus or minus 10 percent, ensuring the final quantity falls within an acceptable range. The bar must have a diameter of 1.375 inches and be finished using both hot and cold processes to meet the precise requirements of the SAE AMS4640J specification. All materials must be properly packaged and clearly marked in accordance with federal shipping standards to ensure safe and traceable transport. The delivery destination is DLA Distribution in New Cumberland, Pennsylvania, with the zip code 17070-5002 specified as the place of performance. The material is classified under NAICS code 332112, indicating it falls within the forgings and stampings manufacturing sector, and the contract is structured as a subcontract under the Department of Defense, specifically managed by the DDSP NEW CUMBERLAND FACILITY. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing vendors a 11-day window to submit proposals.
Nonferrous Forging

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488999
New
DIBBS
Packaging, Marking, and Logistics SupportThe contract requires compliance with MIL-STD-129 for military-grade packaging, uniform identification marking, and bar code labeling to ensure full traceability of military supplies. All items must be prepared for shipment according to Department of Defense standards, including proper UID marking and logistics documentation to support DLA’s receipt and inventory management. The work is focused on preparing materials for delivery to the DLA facility in New Cumberland, Pennsylvania, with strict adherence to traceability and labeling protocols throughout the packaging and shipping process. Subcontractors must meet all federal military logistics requirements, with performance tied to the specified delivery location and timelines. The solicitation closes on August 20, 2026, and is categorized under NAICS code 488999 for other support activities related to transportation. This effort is part of the Department of Defense’s broader logistics infrastructure, managed through the DDSP New Cumberland Facility, and demands precision in packaging, marking, and documentation to ensure seamless integration into the military supply chain.
All Other Support Activities for Transportation

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract pertains to the provision of hazard warning labels and safety data compliance services for hazardous materials, ensuring alignment with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. All deliverables must meet stringent federal safety and labeling protocols to support the safe handling, storage, and transportation of hazardous substances within Department of Defense operations. The work is scoped specifically to support the DDSP NEW CUMBERLAND FACILITY located in NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002, and the services are classified under NAICS code 541690 for other scientific and technical consulting services. This is a subcontract opportunity, and responses are due by August 20, 2026, with the solicitation posted on August 9, 2026. Compliance with all regulatory frameworks is mandatory, and contractors must demonstrate capability to deliver accurate, up-to-date labeling and documentation that meets both civilian and defense-specific safety mandates.
Other Scientific and Technical Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
Valve Body Manufacturing and SupplyThe contract requires the manufacture or supply of a valve body with National Stock Number 4810016611913, fully compliant with applicable military specifications. The scope includes proper packaging, labeling, and timely delivery to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The item falls under the NAICS code 332912, indicating it pertains to other fabricated metal product manufacturing, and is structured as a subcontract opportunity. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026. The contracting entity is the Department of Defense through its DLA New Cumberland Facility, and performance must be executed in accordance with federal procurement standards for military logistics and supply chain requirements.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)
Computer Systems Design Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 323111
New
DIBBS
MIL-STD-129 Compliant Marking and Labeling
Commercial Printing (except Screen and Books)

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details