Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

As-Built Documentation and O&M Manual Development

Active

Federal

Response Deadline07/30/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development of comprehensive as-built drawings, detailed configuration records, complete test reports, and fully updated operations and maintenance manuals for a restored PACS system. All deliverables must accurately reflect the current state of the system post-restoration, ensuring that documentation aligns with installed hardware, software configurations, and operational procedures. The work is critical for long-term system reliability, maintenance readiness, and regulatory compliance. This subcontract is associated with the Department of the Interior’s New Mexico State Office and is performance-based in Farmington. The solicitation was posted on July 27, 2026, with a response deadline of July 30, 2026. It falls under NAICS code 541490, which covers other scientific and technical consulting services, indicating the need for specialized technical expertise in documentation and system configuration. There is no set-aside designation specified, and the contract does not include a point of contact, suggesting proposers must rely on the provided SAM.gov link for further inquiries.

General Info

Develop as-built drawings, config records, test reports, and O&M manuals for restored PACS system in Farmington, NM.

Agency

Department Of The Interior → New Mexico State OfficeView Agency

NAICS

541490 - Other Specialized Design ServicesView NAICS

Place of Performance

Farmington, NM, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 02:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → New Mexico State Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → New Mexico State Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develop comprehensive as-built drawings, configuration records, test reports, and operations and maintenance (O&M) manuals for the restored PACS system.

Similar Contracts

Same NAICS industry code

Human-Machine Interface (HMI) Design for MOPP-Level OperationsThe contract focuses on the development of human-machine interfaces tailored for military personnel operating under MOPP Level 4 protective gear, ensuring full functionality despite restricted dexterity and visibility. Key design requirements include voice-activated systems, tactile controls compatible with thick gloves, and heads-up displays that deliver critical information without requiring direct hand interaction. The interface must maintain operational integrity in high-stress, chemically contaminated environments where traditional input methods are impractical or unsafe. This subcontract, issued under NAICS code 541490 by the Department of Defense through the FA2330 Arspc Mgnt Systms Aflcmc/hba office, seeks innovative solutions to enhance situational awareness and mission effectiveness under extreme conditions. Proposals are due by August 28, 2026, with no set-aside classification specified, and performance is expected to support defense operations without a designated geographic location. The initiative underscores an urgent need for rugged, intuitive interfaces that bridge the gap between advanced technology and the physical constraints of full protective ensemble use.

FA2330 Arspc Mgnt Systms Aflcmc/hba

POSTED

DEADLINE

in about 1 month

Shop Drawing and Submittal CoordinationThe contract requires comprehensive coordination of shop drawings, product data, and submittals in strict accordance with Section 01 33 23, encompassing the preparation, scheduling, and tracking of all documentation through approval processes and integration into project records. The work demands meticulous attention to compliance, timely communication, and accurate documentation to ensure all submittals meet contractual and industry standards, with responsibility for monitoring status, resolving discrepancies, and maintaining an organized system for approval tracking and archival. This is a_SERVICE-Disabled Veteran-Owned Small Business Set Aside subcontract under NAICS code 541490, issued by the Department of Veterans Affairs through PCAC, with performance based in Pittsburgh. The solicitation was posted on July 24, 2026, and responses are due by August 4, 2026, at 6:00 PM. The contract is focused exclusively on coordination activities related to construction documentation, requiring expertise in submittal management systems, adherence to federal construction documentation protocols, and the ability to interface effectively with multiple stakeholders across the project team to ensure all submittals are properly reviewed, approved, and documented without delay.

POSTED

DEADLINE

Master Sign Plan Development & DesignThe contract entails the development of a comprehensive master sign plan for a light industrial site in Indio, California, ensuring full alignment with the City of Indio’s sign codes, zoning regulations, and brand identity requirements. This project requires meticulous design and planning to create a cohesive, compliant, and visually consistent signage strategy that enhances the site’s operational and aesthetic functionality while adhering to local municipal standards. The work must address all relevant municipal guidelines to avoid non-compliance and ensure long-term operational viability. The subcontract is classified under NAICS code 541490, indicating it falls under other professional, scientific, and technical services, specifically related to graphic and design services. The project is tied to the City of Indio as the overseeing agency, with the place of performance located exclusively within the city limits of Indio. The solicitation was posted on July 24, 2026, and the work must be executed in strict accordance with the city’s regulatory framework, requiring the contractor to demonstrate expertise in local ordinances, signage aesthetics, and industrial site branding. All deliverables are expected to support the city’s goals for orderly, safe, and branded visual environments within its industrial zones.

POSTED

DEADLINE

QuinnCat Master Sign PlanThe City of Indio is seeking a Master Sign Plan for the property located at 80510 Indio Boulevard, identified by APN 691-060-052, to establish clear design standards for signage including the number, size, and placement of signs across the approximately 5.30-acre site. The property is zoned Light Industrial and falls within the Workplace and Employment District as defined by the General Plan, requiring signage guidelines that align with both land use objectives and municipal aesthetic regulations. This discretionary planning review, identified as PLAN-PRD-26-0026, focuses on developing a cohesive sign strategy for QuinnCat that ensures compliance with local codes while supporting operational visibility and brand identity. The contract opportunity was posted on July 24, 2026, and is managed through the City of Indio’s planning division, with primary contact being Assistant Planner Luke Fannin, reachable at 760-391-4142 or lfannin@indioca.gov. Project Manager Jessica Ortega of PermitSecured serves as a secondary point of contact, offering additional support at 909-742-9469 or team@permitsecured.com. All project-related correspondence and documentation can be accessed via the California Environmental Quality Act portal using the project link provided. The planning review process will evaluate how the proposed sign plan integrates with existing zoning conditions and community standards, with no set-aside provisions or NAICS code specified at this stage.

POSTED

DEADLINE

Technical Documentation & As-Built DrawingsThe contract requires the preparation of comprehensive operations and maintenance manuals, as-built drawings in multiple formats including hard copy, PDF, and AutoCAD, along with complete warranty documentation adhering to federal standards. All deliverables must meet rigorous technical specifications to ensure long-term usability, compliance, and accessibility for federal stakeholders. The work is scoped under NAICS code 541490 and is categorized as a subcontract, indicating it supports a larger prime contracting effort under the Department of Commerce, specifically managed by WAD-NMFS-Seattle. Proposals must be submitted by August 10, 2026, with the solicitation posted on July 24, 2026, leaving a competitive window of approximately three weeks for qualified vendors to respond. Although specific location details for performance or contact information are not provided, the work is presumed to support federal infrastructure or facilities under the agency’s jurisdiction, likely involving marine or fisheries-related operations. All documentation must be delivered in accordance with federal requirements, emphasizing precision, formatting consistency, and regulatory alignment to ensure successful acceptance and implementation.

WAD-NMFS-Seattle

POSTED

DEADLINE

Construction Documentation and BIM CoordinationThe contract entails the production of fully coordinated construction documents and Building Information Modeling (BIM) models to support a Construction Manager at Risk (CMAR) delivery method, with a focus on enabling phased construction execution. The work requires rigorous interdisciplinary alignment to ensure that architectural, structural, mechanical, electrical, and other building systems are integrated seamlessly within the BIM environment and accompanying documentation, minimizing conflicts and facilitating efficient procurement and field implementation. The deliverables must meet high standards of accuracy, completeness, and coordination to support the CMAR process, allowing for early contractor involvement, cost control, and schedule optimization throughout the project lifecycle. The solicitation, titled Construction Documentation and BIM Coordination, is issued as a subcontract under NAICS code 541490 for other architectural services and is managed by the Fulton County Purchasing Department in Georgia. Responses are due by August 27, 2026, with the posting date occurring in July 2026. There is no specified set-aside status or location details provided for the place of performance, and the point of contact information is not listed. Interested parties must access the full solicitation through the official Georgia procurement portal link to obtain additional requirements, evaluation criteria, or submission instructions necessary for compliance and proposal development.

Fulton County Purchasing Department

POSTED

DEADLINE

Sibley Hospital Paternity ProgramThe District of Columbia Attorney General’s Office has announced a forecast for the Sibley Hospital Paternity Program, aimed at establishing legal paternity through formal acknowledgments, likely in coordination with healthcare services provided at Sibley Hospital. This initiative falls under the broader effort to strengthen family legal frameworks and ensure children’s access to financial support, medical history, and parental rights. While specific details on methodology, eligibility, or funding are not included, the program is anticipated to facilitate voluntary acknowledgments of paternity, potentially integrating with birth registration processes and child support enforcement systems. The forecast does not specify a solicitation number, NAICS code, or place of performance, indicating it is early-stage planning with no formal procurement yet active. The posting date of July 23, 2026, signals this is a forward-looking notice for stakeholders in legal, public health, and social services.

Attorney General (OAG)

POSTED

DEADLINE

Professional Design, Layout, & ProductionThe contract titled Professional Design, Layout, & Production is a forecasted opportunity issued by the Insurance, Securities and Banking (DISB) agency under the District of Columbia. It is intended to secure services related to professional design, layout, and production, though specific deliverables, scope, or technical requirements are not detailed in the available data. The opportunity was posted on July 23, 2026, and is currently listed as a forecast, indicating it is a preliminary notice rather than an active solicitation. There is no solicitation number assigned, and no information is provided regarding set-aside status, NAICS code, organization type, or point of contact. The place of performance and office address lack specific location details, suggesting the work may be performed remotely or within the District of Columbia without a defined physical location. Interested parties should monitor the official portal at the provided UI link for future updates, including the release of a formal solicitation with full requirements and submission guidelines.

Insurance, Securities and Banking (DISB)

POSTED

DEADLINE

Semicolon Design GroupThe District of Columbia Department of Human Services is forecasting a contract opportunity with Semicolon Design Group for the design and innovation of a SNAP form. This procurement is part of the agency’s effort to modernize and improve the accessibility and usability of its nutrition assistance application process. Although specific details such as funding amount, timeline, or technical requirements are not yet defined, the contract will focus on user-centered design principles to enhance the digital and printed forms used by applicants seeking Supplemental Nutrition Assistance Program benefits. The solicitation is publicly listed as a forecast with no set-aside designation or NAICS code assigned at this stage, indicating it is in an early planning phase. The place of performance and official point of contact information are not provided, but the work is expected to be aligned with the operational needs of the District of Columbia’s human services infrastructure. The opportunity is accessible through the District’s contracts portal, with the official posting date recorded as July 23, 2026, suggesting this is a forward-looking announcement for future contracting activities. Stakeholders and interested vendors are encouraged to monitor the portal for updates as the solicitation develops toward a formal request for proposal.

Human Services (DHS)

POSTED

DEADLINE

Digital Design and Technical DocumentationThe contract seeks the production and delivery of digital design files in SolidWorks or STEP-203 format alongside detailed PDF blueprints for all hardware components and subsystems, ensuring precise technical documentation for naval applications. The work is under subcontract and falls under the NAICS code 541490, indicating specialized engineering design services, with performance required at a location with zip code 20375, associated with the Naval Research Laboratory under the Department of Defense. The opportunity was posted on July 23, 2026, and responses must be submitted by August 3, 2026, by 9:00 PM, with no set-aside provisions specified, making it open to all qualified vendors regardless of business size or certification status.

Naval Research Laboratory

POSTED

DEADLINE

Introduction: The Jefferson County School District (JCSD) is located in Fayette, MS. School facilities consist of four schools and one central office. The district has approximately 1,100 students. Purpose of RFP: The district is requesting for sealeThe Jefferson County School District, located in Fayette, Mississippi, serves approximately 1,100 students across four schools and one central office and is seeking proposals for sealing services. The solicitation, identified as 251-20260720183941 JCSD, was posted on July 21, 2026, with responses due by August 4, 2026. This request is managed under the Mississippi Department of Finance and Administration’s procurement system, with the agency name listed as MPTAP and the state of Mississippi as the overseeing entity. The work is expected to be performed within the district’s facilities in Mississippi, though specific location details and point of contact information are not provided. The solicitation is classified as a SLED procurement, indicating it is issued by a state, local, or educational government entity.

POSTED

DEADLINE

Military-Grade Packaging Design and ValidationThe contract requires the design and validation of packaging solutions specifically engineered for vehicular windows to meet rigorous military standards, including MIL-STD-2073-1E for preservation, packaging, and labeling, and ASTM D4169 for performance testing under simulated military distribution environments. The packaging must ensure the protection of sensitive window components throughout harsh logistical conditions, including transit, handling, storage, and environmental exposure typical of defense supply chains. Compliance with these standards is critical to prevent damage, corrosion, or degradation during transport and to maintain operational readiness upon delivery. This is a subcontract opportunity under the NAICS code 541490, categorized under engineering services, issued by the Department of Defense through the LAND SUPPLY CHAIN office. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, leaving a limited window for qualified vendors to submit proposals. While specific performance locations and point of contact details are not provided, the work must align with Department of Defense logistics requirements and is intended to support the secure and reliable delivery of military vehicle components. Interested parties must demonstrate technical expertise in military-grade packaging design and validation, with a focus on durability, consistency, and adherence to federal standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of The Interior → New Mexico State Office

Same awarding agency

On-Site Personnel Training for PACS Operation and AdministrationThe contract seeks to provide on-site, instructor-led training to Bureau of Land Management personnel in the operation, administration, and maintenance of the PACS system, covering key areas such as troubleshooting, user management, alarm response, and system updates. Training must be delivered directly at the designated location in Farmington, ensuring hands-on, practical instruction tailored to the needs of BLM staff responsible for daily system use and oversight. The work is structured as a subcontract under a NAICS code associated with educational services, indicating a focus on specialized technical instruction rather than hardware or software procurement. The solicitation was posted on July 27, 2026, with a strict response deadline of July 30, 2026, at 2:00 PM, leaving a narrow window for interested parties to submit proposals. Although the contracting agency is listed as the New Mexico State Office within the Department of the Interior, specific contact information and place-of-performance details like state or zip code are not provided, suggesting the requirement is highly localized to the Farmington area. The absence of set-aside designations or organization type specifications indicates this opportunity is open to any qualified subcontractor capable of delivering high-quality, field-based technical training.

Professional and Management Development Training

POSTED

DEADLINE

On-Site PACS Testing, Validation, and Compliance VerificationThe contract requires on-site functional testing and validation of a restored PACS system, with a focus on credential authentication, alarm monitoring, and fail-safe mechanisms to ensure robust operational integrity. The work must verify compliance with federal identity, credential, and access management standards including FICAM and FIPS 201, as well as UL 294 for physical security access control systems. Formal test reports documenting the results of each validation activity must be delivered upon completion, providing authoritative confirmation of system adherence to mandated security protocols. All testing activities are to be performed at the designated place of performance in Farmington, with a strict deadline for proposal submissions set for July 30, 2026. The contract is classified as a subcontract under NAICS code 541380, indicating specialized scientific and technical consulting services, and is managed by the Department of the Interior through the New Mexico State Office. The urgency of the timeline and the technical specificity of the requirements necessitate a highly qualified provider with proven experience in federal compliance testing and PACS system validation.

Testing Laboratories and Services

POSTED

DEADLINE

PACS System Integration and Centralized Control ImplementationThe contract calls for the integration of Picture Archiving and Communication System components across multiple sites into a single, centrally managed infrastructure. This involves configuring and synchronizing databases, validating secure and reliable network communications between locations, and ensuring full interoperability among diverse hardware and software platforms to support seamless medical image exchange and access. The work requires technical expertise in healthcare IT systems and a clear understanding of enterprise-level clinical data workflows to enable consistent performance and compliance across all connected facilities. Performance of the contractual obligations is centered in Farmington, with the work executed under a subcontract awarded by the Department of the Interior through its New Mexico State Office. The solicitation was posted on July 27, 2026, with responses due by July 30, 2026, and the endeavor falls under NAICS code 541512, indicating it is categorized as computer systems design services. The project demands precise coordination to unify geographically dispersed PACS environments into one controlled system, ensuring scalability, data integrity, and operational continuity for imaging services throughout the network.

Computer Systems Design Services

POSTED

DEADLINE

PACS Software Upgrade and FICAM-Compliant LicensingThe contract requires upgrading existing PACS software to the latest version that meets FICAM compliance standards and supports PIV-8 credentials, ensuring secure authentication and identity verification across all deployed systems. The vendor must install, license, and centrally manage the software across multiple facilities, enabling seamless integration with existing infrastructure while maintaining regulatory alignment and operational continuity. All activities must be coordinated to support a unified, secure environment without disruption to current imaging workflows. Performance is centered in Farmington, with the work falling under NAICS code 511210 for software publishing, and the contract is classified as a subcontract under the Department of the Interior’s New Mexico State Office. The response deadline is set for July 30, 2026, with no set-aside provisions specified. The procurement emphasizes end-to-end software lifecycle management, including licensing compliance, centralized oversight, and system-wide deployment to ensure consistent, secure access to PACS functionality across all designated locations.

Software Publishers

POSTED

DEADLINE

FICAM-Compliant Physical Access Control System (PACS) Hardware Repair and ReplacementThe contract requires the diagnosis, repair, and replacement of degraded hardware components within the Physical Access Control System (PACS), including card readers, controllers, door locks, and associated wiring. All newly installed hardware must meet FICAM compliance standards and be listed on the GSA Approved Products List to ensure alignment with federal identity, credential, and access management requirements. Work is focused on maintaining secure and reliable physical access controls at the designated location in Farmington, with strict adherence to federal procurement and security protocols. This subcontract, issued by the Department of the Interior through the New Mexico State Office, is open for responses until July 30, 2026, with a posted date of July 27, 2026. The North American Industry Classification System code 334210 applies, indicating the work falls under the manufacturing of electronic components and accessories. The place of performance is fixed in Farmington, and all proposed solutions must satisfy federal compliance benchmarks without exception. No set-aside provisions are specified, and the contract is intended to ensure continuous, secure operations of critical physical access infrastructure.

Telephone Apparatus Manufacturing

POSTED

DEADLINE

K--OUTFITTING NEW F-450 TRUCK FOR THE FIELDThis solicitation, numbered 140L1726Q0021, is a total small business set-aside for outfitting a new Ford F-450 truck to support field operations for the Bureau of Land Management’s Wild Horse and Burro Program, with performance required at the Grand Junction, Colorado delivery site. The contract is awarded on a firm-fixed-price basis under FAR Part 12 for commercial products and services, using a lowest price technically acceptable evaluation methodology. All offerors must be currently registered and active in SAM.gov with a valid Unique Entity ID and CAGE code, and must submit a complete and signed SF-1449 with pricing, an acknowledgment of all amendments, and a formal response to FAR 52.212-2. Questions must be submitted by July 27, 2026, and quotes are due by July 29, 2026, via email to the designated point of contact; late submissions will not be considered. The truck must be outfitted with a flatbed, bumper with grille guard, toolboxes, spare-tire holder, and toolbox slider to meet operational needs for hauling trailers and transporting horses in Colorado and adjacent states, with delivery required no later than October 16, 2026. Award will be made on an all-or-none basis, with acceptance occurring at the delivery location upon successful inspection by the government. Invoices must be submitted electronically through the Invoice Processing Platform, and no payment will be processed without compliance. Special requirements include adherence to labor standards, whistleblower protections, child labor prohibitions, and a ban on texting while driving government vehicles. The solicitation incorporates numerous FAR clauses with authorized deviations as indicated by "(DEVIATION)" suffixes, and offerors must affirm their small business status and any applicable socioeconomic certifications. Amendment 0001 was issued solely to post questions and answers without altering any other terms.

General Automotive Repair

POSTED

DEADLINE

in about 8 hours

J--RESTORATION AND RECOMMISSIONING OF FICAMThe U.S. Department of the Interior, New Mexico State Office, is seeking information from potential vendors for the restoration and recommissioning of a FICAM-compliant Physical Access Control System (PACS) at a facility in Farmington, New Mexico. This sources sought notice, identified by solicitation number 140L1726Q0027, aims to gather market research to inform a future acquisition and does not constitute a request for proposals or a guarantee of contract award. The effort is classified under NAICS code 561621, which pertains to security services, and responses are due by July 30, 2026, at 2:00 PM eastern time. Interested parties should direct inquiries to Lashondra Hubbard, the primary point of contact, at lashondra_hubbard@ios.doi.gov. The work will involve upgrading or reactivating an existing physical access control system to ensure alignment with current federal identity, credential, and access management standards, with performance expected to be conducted at the specified location in Farmington, New Mexico.

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

Compliance and Regulatory CoordinationThis contract requires full compliance with all applicable federal, state, and local regulations including the Americans with Disabilities Act, Occupational Safety and Health Administration standards, International Building Code, Uniform Building Code, New Mexico state statutes, and Davis-Bacon wage requirements. All work must be performed in strict adherence to these regulatory frameworks to ensure safety, accessibility, and labor law compliance. The contract is a Small Business Set-Aside under the SBA program, designated for total small business participation as defined in FAR 19.5, and is classified under NAICS code 541618, indicating it pertains to other management consulting services. Performance is required in Grants, New Mexico, under the oversight of the Department of the Interior’s New Mexico State Office. Submitting proposals must occur no later than August 6, 2026, at 2:00 PM, and the solicitation was posted on July 23, 2026.

Other Management Consulting Services

POSTED

DEADLINE

Mobilization and Demobilization ServicesThe contract titled Mobilization and Demobilization Services entails comprehensive site setup, transportation of all necessary equipment, mobilization of labor, and full restoration of the site upon project completion. It is a subcontract classified as a Total Small Business Set-Aside under SBA regulations, exclusively available to small businesses as defined by the North American Industry Classification System code 238990, which covers other specialty trade contractors. The solicitation was posted on July 23, 2026, with a response deadline of August 6, 2026, and is managed by the New Mexico State Office under the Department of the Interior. The place of performance is in Grants, New Mexico, though specific address details are not provided. All work must adhere to federal contracting standards and include full accountability for site conditions before and after operations.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Freight and Delivery of Toilet Building and MaterialsThe contract requires the transportation of a prefabricated Gunnison toilet building and all related materials from the manufacturer to the RPFO-NCA site in Grants, New Mexico, under FOB Destination terms, meaning the seller assumes all responsibility and cost until the goods reach the specified delivery point. The work is classified as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 484220 for truck transportation of freight. The solicitation was posted on July 23, 2026, with a response deadline of August 6, 2026, at 2:00 PM. The procuring entity is the New Mexico State Office within the Department of the Interior, and the sole place of performance is identified as Grants, NM, with no additional address details provided.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply and Installation of New Gunnison Single Vault Toilet BuildingThe contract calls for the supply and installation of a prefabricated 6’6” x 14’8” Gunnison Single Vault Toilet Building, encompassing all necessary site work including foundation construction, structural anchoring, and full integration into the existing environment at the location in Grants, New Mexico. The project requires delivery of a complete, turnkey solution that meets all engineering and environmental standards for permanent installation, with attention to durability, accessibility, and long-term maintenance requirements. The work must be performed under a Small Business Set-Aside designation, ensuring eligibility and performance by a certified small business as defined under SBA regulations and FAR 19.5. The North American Industry Classification System code 238910 applies, classifying the work under Other Heavy and Civil Engineering Construction. The solicitation is open for bids with a response deadline of August 6, 2026, at 2:00 PM, and the opportunity is posted under the Department of the Interior’s New Mexico State Office. The contract is structured as a subcontract, indicating it may be awarded to a primary contractor or subcontractor fulfilling a larger project scope. All materials and construction must comply with federal specifications and site-specific conditions, and the successful vendor will be responsible for coordination with local authorities, permitting, and ensuring full functionality of the completed structure. There is no designated point of contact provided in the solicitation data, and the location details do not include a specific street address or zip code, suggesting that site verification and logistics planning will be the responsibility of the bidder.

Site Preparation Contractors

POSTED

DEADLINE

Removal and Disposal of Existing Vault ToiletThe contract is for the complete removal and environmentally compliant disposal of a single vault toilet structure located at the RPFO-NCA site in Grants, New Mexico. All work must adhere to applicable environmental regulations to ensure safe and lawful handling and disposal of materials associated with the structure, with particular emphasis on preventing contamination and preserving site integrity. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, and it is assigned the NAICS code 238990 for other construction-related services not elsewhere classified. The solicitation was posted on July 23, 2026, and responses are due by August 6, 2026, at 2:00 PM local time. The contracting agency is the New Mexico State Office under the Department of the Interior, and performance of the work is required at the specified location in Grants. No point of contact information is provided within the data but bidders are to refer to the official SAM.gov link for submission and additional details. This effort is restricted to small business concerns and requires full compliance with federal guidelines for environmental safety, waste management, and subcontracting procedures.

All Other Specialty Trade Contractors

POSTED

DEADLINE