Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAND, MARKER

Active
SPE8E6-26-T-4104Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 46 units of a band and marker item identified by NSN 9905-01-660-3802 and part number SS7194-S3-MKG-9, sourced from SIKORSKY AIRCRAFT CORPORATION. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and must be followed as of the solicitation issue date. Packaging must comply with MIL-STD-129 and the DLA Packaging Requirements for Procurement RP001, while physical identification of the bare item must adhere to RQ017. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is designated as a critical application item, and covered defense information may apply. The contract mandates delivery FOB origin in 217 days with no quantity variance allowed. Inspection and acceptance occur at destination, with packaging and marking fully compliant with specified military and DLA standards. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is March 23, 2027, with the original delivery deadline set for March 31, 2027. All transportation logistics are to follow DLAD Proc Notes C19 and C20. The point of contact for this solicitation is Tai Nguyen of the Department of Defense.

General Info

Procure 46 units of NSN 9905-01-660-3802 from Sikorsky, FOB origin, delivery by March 31, 2027, to New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

339950 - Sign ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E6-26-T-4104 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Tai Nguyen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAND,MARKER
BAND, MARKER
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
"DLA does not have a bidset available"
.. RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
..
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
SIKORSKY AIRCRAFT CORPORATION 78286 P/N SS7194-S3-MKG-9
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE8E6-26-T-4104
SECTION B
PR: 7017757230 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757230 0001 EA 46.000
NSN/MATERIAL:9905016603802
DELIVERY (IN DAYS):0217
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/23/2027 Original Required Delivery Date:03/31/2027
SPE8E6-26-T-4104 NSN/Part Number: 9905-01-660-3802 Quantity: 46 EA Purchase Request: 7017757230QTY: 46 Delivery: 217 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339950
New
DIBBS
PLATE, INSTRUCTION
Solicitation # SPE8E6-26-T-4069
The contract solicitation SPE8E6-26-T-4069 is for the procurement of 136 units of a PLATE, INSTRUCTION identified by NSN 9905143983767, with a unit price of $136.000 and a total contract value of $18,496. Delivery is required within 167 days after award, with a need ship date of February 1, 2027 and an original required delivery date of June 7, 2027, to be shipped FOB origin to the destination at 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Packaging must adhere to MIL-STD-2073-1E with clean/dry preservation (Method 10), no preservation or wrapping materials, a unit container of fiberboard box, and intermediate container as fiberboard box, with palletization conforming to DLA Packaging Requirements RP001. Marking must follow MIL-STD-129 with no special marking code and barcoding as required. Mercury or mercury-containing compounds are strictly prohibited unless for approved applications such as batteries, fluorescent lights, specific instruments, weapon systems, or NAVSEA-specified reagents, and portable items containing mercury must have shockproof construction with a secondary containment per NAVSEA 5100-003D. Hazardous material identification and Safety Data Sheets must be provided for any non-exempt materials under 29 CFR 1910.1200, with labeling compliant with federal statutes. Transportation must comply with U.S.-flag vessel requirements unless prior approval is obtained for foreign-flag use, with detailed reporting obligations for ocean shipments. Contractors must implement NIST SP 800-171 cybersecurity safeguards, report any cyber incidents, inform employees of whistleblower rights, and provide a Unique Entity Identifier and CAGE code. Inspection and acceptance occur at destination under FAR 52.246-1, and invoicing must be submitted through WAWF. The contract type remains to be determined by the Contracting Officer, and the solicitation allows for small business set-asides including HUBZone, SDVOSB
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339950
New
DIBBS
REFLECTOR, INDICATING, C
Solicitation # SPE8E6-26-T-4100
The contract concerns the procurement of 874 units of a clearance indicating reflector, identified by NSN 9905-01-478-4267, under solicitation SPE8E6-26-T-4100. Delivery is required within 21 days of award, with the solicitation opening on August 5, 2026, and responses due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. Technical data associated with this item is subject to export control under ITAR or EAR, restricting any disclosure to foreign persons, including those within the United States, unless authorized by the Department of State or Department of Commerce. Only contractors with approved US/Canada Joint Certification Program certification, completed DLA training on export-controlled data, and approved access through the DLA questionnaire are permitted to handle this data. The acquisition is for the Defense Logistics Agency’s New Cumberland facility, with primary point of contact John Lieb, and falls under NAICS code 339950.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339950
New
DIBBS
PLATE, IDENTIFICATIO
Solicitation # SPE8E6-26-T-4023
This contract pertains to the procurement of a plate identification item designated by NSN 9905-01-415-4604 and part number 30-4406-2, with a quantity of 38 units to be delivered under solicitation SPE8E6-26-T-4023. Delivery is required within 167 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is classified as a critical application item, and strict compliance with DLA packaging and marking standards is mandated, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the item or its components except for specific approved applications like batteries, fluorescent lamps, or weapon systems as defined by NAVSEA, and portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. The supplier must adhere to all technical and quality requirements referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements, which is updated according to the revision in effect on the solicitation or award date. All deliveries must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, and must comply with transportation guidelines outlined in DLAD Proc Notes C19 and C20. The unit price is $38.00 per unit, resulting in a total contract value of $1,444.00, and the contract specifies a zero tolerance for quantity variance. The point of contact for inquiries is Tai Nguyen at DLA, with the response deadline having passed on August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339950
New
DIBBS
PLATE, IDENTIFICATIO
Solicitation # SPE8E9-26-T-3367
Hamilton Sundstrand Corporation, identified by CAGE code 99167, is contracted to supply 66 identification plates with part number 745184-14 under contract SPE8E9-26-T-3367. The delivery is due within 167 days of the award, with FOB origin terms and final delivery destined for Hill AFB, Utah. The unit of issue is each, with a fixed unit price of $66.00 and a total contract value of $4,356.00. The supply is subject to strict packaging and labeling requirements in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Packaging must adhere to RP001 DLA packaging standards and palletization guidelines. The item incorporates Covered Defense Information, and all technical and quality controls referenced by R or I numbers are governed by the DLA Master List, with revisions tied to the solicitation issue or award date. The NSN is 9905-01-672-4915, and inspection and acceptance occur at the destination. No quantity variance is permitted. The contract mandates removal of government identification from non-accepted supplies and requires compliance with documentation protocols for source approval. The original delivery date is April 5, 2027, with a needed ship date of February 1, 2027. All transportation logistics follow DLAD procedural notes C19 and C20, and the point of contact for inquiries is Matthew Kruc at the Department of Defense.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, INSTRUCTION
Solicitation # SPE8E6-26-T-3997
This contract, issued under solicitation SPE8E6-26-T-3997 by the Department of Defense through DLA Distribution Depot Oklahoma, specifies the procurement of three units of Plate, Instruction with NSN 9905-00-881-6118 at a unit price of $3.00, totaling $9.00. Delivery is required FOB origin within 167 days, with inspection and acceptance occurring at the destination. The quantity is fixed at zero variance, and packaging must comply with ASTM D3951 while adhering strictly to DLA Master List requirements, particularly RP001 for packaging and MIL-STD-129 for marking and labeling. All technical and quality specifications referenced by R or I numbers are governed by the current DLA Master List revision effective on the solicitation issue date, and these take precedence over any other standards. The item must be palletized per RP001, and government identification must be removed from non-accepted supplies as per RQ011. The delivery address is Tinker AFB, Oklahoma, and the required ship date is February 1, 2027, with an original delivery deadline of March 13, 2027. Transportation instructions follow DLAD Proc Notes C19 and C20. Documentation for source approval must meet RC001 requirements, and the contract incorporates covered defense information protocols as noted in RD003. The point of contact is Tai Nguyen, with the solicitation posted August 5, 2026, and response due by August 17, 2026.
DEPOT OKLAHOMA

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, INSTRUCTION
Solicitation # SPE8E6-26-T-4063
The contract pertains to the procurement of one unit of a plate and instruction item identified by NSN 9905-01-695-7601 and part number 518821, under solicitation SPE8E6-26-T-4063, issued by the Defense Logistics Agency. Delivery is required within five days of award to a destination address in FPO AP 96306-0001, with FOB destination terms and no variance allowed in quantity. The item must be packaged in compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory adherence to MIL-STD-129 for marking and labeling. Packaging and palletization must follow DLA-specific requirements under RP001, and government identification must be removed from any non-accepted supplies. Covered Defense Information may apply, and transportation protocols are governed by DLAD PROC NOTES C19 and C20. The unit of issue is EA, with a total price of one unit at the specified contract unit price, and the original required delivery date is August 4, 2026. The contract includes references to technical and quality standards identified by R and I numbers from the DLA Master List, accessible via the official DLA website, with revisions controlled based on the nature of the acquisition and applicable amendment dates. The purchasing request number is 7017722082, and the contract is classified under NAICS code 339950. The delivery is scheduled to a U.S. military overseas location with a corresponding Japanese freight shipping address for logistics coordination. The point of contact for inquiries is Sophia Lim, reachable via email or phone, and additional contract data is available through the DIBBS portal. The government reserves the right to use designated classification codes for internal tracking, and the bidset is not available. The item is intended for a specific DLA program, with the project code BN1 TP 1 and supply designation B.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339950
New
DIBBS
POLE DRIVER
Solicitation # SPE8E6-26-T-3996
The contract is for the procurement of 43 units of a Pole Driver, identified by NSN 9905-01-066-9543 and part number 13221E7391, under solicitation SPE8E6-26-T-3996. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization governed by DLA’s RP001 standards. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances unless otherwise specified, and sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan. The material specification allows AISI/SAE 4130 seamless tubing meeting MIL-T-6736 provided it satisfies ASTM A519. The contract requires delivery within 167 days of award, FOB origin, with no quantity variance permitted, and shipment must be directed to DLA Distribution Red River in Texarkana, TX. The required delivery date is January 14, 2027, with a need ship date of February 1, 2027, and the unit price is $43.00 per unit, totaling $1,849.00. All documentation, including drawings, is accessible via DIBBS during solicitation, and covered defense information applies per RD003. The point of contact is Kathleen Selover, with contract data published on August 5, 2026, and responses due by August 17, 2026.
RED RIVER RECEIVING BLDG

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
Federal
N059--Outdoor Digital Communication Signs Installation POP 09/01/2026 - 08/31/2027
Solicitation # 36C26226Q1292
The Southern Arizona VA Healthcare System is seeking qualified Service-Disabled Veteran-Owned Small Business (SDVOSB) concerns to install two outdoor digital communication signs at its facility in Tucson, Arizona, under a firm fixed-price contract set-aside exclusively for SDVOSBs. The procurement, identified by NAICS code 339950 and PSC N059, requires the removal of existing aged hardware and the installation of new LED modules, control hardware, and Opx software using the existing sign structures and power sources. All labor, materials, equipment, and supervision must be provided by the vendor, with no new cabinets or power infrastructure to be installed. The contract period runs from September 1, 2026, to August 31, 2027, with work to be conducted during standard federal business hours, excluding holidays. Performance must occur on federal property, and all personnel must possess a valid Non-PIV/I badge, abide by strict no-smoking policies, and comply with VA security and credentialing requirements, including background vetting under VA Directive 0710. Quotations must be submitted electronically by August 21, 2026, and must include full compliance with FAR and VAAR provisions, certified SAM registration, and a signed Certificate of Compliance for Limitations on Subcontracting, confirming that no more than 50% of the contract value will be paid to non-SDVOSB subcontractors. Evaluation will prioritize price, with past performance assessed through CPARS and FAPIIS ratings. Invoices must be submitted exclusively through the Tungsten Network, and all submissions must affirm acceptance of the solicitation’s terms without modification. A site visit is encouraged on August 14, 2026, and any questions must be submitted by August 18, 2026. Failure to meet documentation, certification, or compliance requirements will result in disqualification. The contract includes enforceable clauses related to whistleblower protections, trafficking in persons, labor standards, cybersecurity, electronic payment systems, and the prohibition of inverted domestic corporations, with deviations authorized under applicable federal and VA acquisition guidance effective through November 2025.
262-NETWORK Contract Office 22 (36C262)

POSTED

about 23 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339950
New
SLED
Signage and Parking Guidance System
Texas State University System

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 339950
New
SLED
Signage and Traffic Control Materials SupplyThe contract involves the supply of pre-fabricated traffic signs, bollards, and temporary traffic control devices to support construction activities both during and after project execution. It is categorized as a subcontract under NAICS code 339950, which pertains to other miscellaneous manufacturing, and is issued by the Mississippi Department of Transportation through its agency name MPTAP. The solicitation was posted on August 4, 2026, with a firm response deadline of September 1, 2026, indicating a four-week window for potential suppliers to submit proposals. Performance of the contract will occur within the state of Mississippi, though specific locations are not detailed, implying work may be distributed across multiple construction sites under state oversight. The contract does not specify a set-aside designation or organizational type requirements, suggesting open competition among qualified vendors. All materials must meet the technical and safety standards required for public roadway applications and must be delivered on schedule to support phased construction timelines.
MPTAP

POSTED

1 day ago

DEADLINE

in 26 days
View Details
NAICS: 339950
New
DIBBS
Container Marking and Unique Item Identification (UII) EncodingThis contract requires the application of machine-readable labels and Unique Item Identifiers (UII) on freight containers in strict compliance with MIL-STD-130 and MIL-STD-129 standards, ensuring uniformity for Department of Defense asset tracking. The labeling must utilize EAN/UCC Application Identifiers to encode critical data elements that enable accurate identification, inventory management, and logistical tracking of containers across the defense supply chain. All markings must be durable, legible, and meet the technical specifications required for automated scanning and data interoperability within DoD systems. The work is to be performed at the specified location in Williamsburg, Virginia, with a final delivery and compliance deadline of August 11, 2026. This subcontract is a total small business set-aside under the SBA program, meaning only certified small businesses may bid, and it falls under NAICS code 339950 for other miscellaneous fabricated metal product manufacturing. The contracting entity is the Department of Defense through its Construction & Equipment Containers division, and all submissions must adhere to the regulatory and procedural guidelines outlined in FAR 19.5 for small business set-asides. Participation requires proven capability in implementing military labeling standards, familiarity with UII encoding protocols, and experience in providing compliant marking solutions for defense logistics operations.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 339950
New
DIBBS
Battery Labeling and Marking ServicesThe contract requires the application of durable, military-compliant labels and markings on batteries in strict accordance with MIL-STD-129 and MIL-STD-130N standards, ensuring traceability, durability, and regulatory compliance across the defense supply chain. A critical requirement includes the use of special code 32 for shelf life tracking, which mandates precise labeling to monitor expiration dates and ensure operational readiness of battery inventory. All markings must withstand harsh environmental conditions and remain legible throughout the product’s lifecycle, from manufacturing through deployment and storage. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 339950 and targets specialized labeling services for military hardware. The place of performance is designated at FPO with ZIP code 09514, indicating operations may occur in overseas or mobile military locations. Responses are due by August 14, 2026, following a solicitation posted on August 4, 2026, and bidders must demonstrate technical expertise in military labeling standards, supply chain compliance, and the ability to execute high-volume, high-accuracy labeling under stringent quality controls.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 493190
New
DIBBS
Specialized Packaging and Labeling Services
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332211
New
DIBBS
Precision Milling Cutter Supply
Cutlery and Flatware (except Precious) Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
Supply of Reflective Tape (Red, 6 Inches Wide, 1800 Inches per Roll)The contract entails the procurement and delivery of 158 rolls of red reflective tape, each measuring 6 inches in width and containing 1,800 inches of material, fully compliant with federal standards for reflectivity, durability, and use in hazardous material labeling. The tape must meet stringent performance criteria to ensure visibility and safety in critical applications, particularly within defense and transportation environments. The requirement is part of a subcontract under a Women-Owned Small Business Set-Aside, designated by NAICS code 325520, and is being managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance of this contract is required to take place at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted no later than August 17, 2026. All submissions must adhere to federal specifications ensuring the product's reliability under demanding conditions, and the award will be restricted to certified Women-Owned Small Businesses as mandated by the set-aside classification. The contract details are accessible via the DIBBS platform at the provided link, and timely compliance with delivery and quality requirements is essential for successful contract execution.
Adhesive Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation Services
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Technical Compliance and Hazard Documentation Support
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining and Tool Manufacturing
Machine Shops

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332320
New
DIBBS
Supply of Welding Electrodes (NSN: 3439016664749)The contract pertains to the supply and delivery of 63 units of commercial off-the-shelf welding electrodes, with each unit containing 10 electrodes, for use in metal fabrication and repair operations. All electrodes must meet federal specifications and are identified by the National Stock Number 3439016664749. The requirement is issued under a subcontract with a response deadline of August 17, 2026, and was posted on August 5, 2026. The work is to be performed at the New Cumberland facility with a zip code of 17070-5002, under the authority of the Department of Defense through the DDSP New Cumberland Facility. The North American Industry Classification System code for this requirement is 332320, indicating it falls within the forge and stamping industry sector. No set-aside type or point of contact details are provided in the available data.

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Quality Certification and Documentation Services
Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Metal Marking and Identification
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331222
New
DIBBS
Precision Steel Bar Manufacturing and Supply
Steel Wire Drawing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery to Destination (FOB Destination)The contract requires the transport and delivery of packaged filter elements to the specified destination under FOB Destination terms, meaning the seller retains responsibility for all costs and risks until the goods arrive and are accepted at the destination. Proof of delivery and inspection readiness at the location are mandatory, ensuring the recipient can verify receipt and conduct immediate inspections upon arrival. The place of performance is clearly designated as New Cumberland with a zip code of 17070-5002, and the responsible agency is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The contract falls under NAICS code 484220, which corresponds to specialized freight trucking, indicating the need for specialized logistics handling. This is a subcontract opportunity with a response deadline of August 17, 2026, and it was posted on August 5, 2026, providing potential respondents approximately twelve business days to prepare and submit their proposals. All parties must ensure compliance with delivery timing, documentation requirements, and inspection protocols to meet contractual obligations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details