Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CIRCUIT BREAKER

Active
SPE7M5-26-T-356XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a circuit breaker, part number MS25361-75, manufactured in compliance with SAE AS58091 Revision D dated 08/01/1999, with no commercial substitutes allowed without prior written government approval. The item is classified as a critical application item and must meet strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware except in limited, explicitly defined exceptions such as functional batteries or instruments, with additional requirements for secondary containment and shockproofing for portable devices containing mercury. The use of Class I ozone-depleting substances is entirely prohibited in any phase of design, manufacturing, or testing unless approved in writing by the contracting officer, overriding any conflicting specification language. The item must be packaged, marked, and shipped in full compliance with MIL-STD-2073-1E and MIL-STD-129, with packaging code U, preserved using Method 41, and shipped FOB origin to the designated receiving warehouse in Tracy, California. Delivery is required within 147 days of contract award, with a mandatory ship date of January 5, 2027, and no variance in quantity allowed—exactly 12 units must be delivered. The NSN is 5925-01-080-1371, and all transportation details adhere to DLA procedures C19 and C20. The solicitation number is SPE7M5-26-T-356X, issued under NAICS code 335313 by the Department of Defense’s Active Devices Division, with a response deadline of August 10, 2026, and inspection and acceptance performed at the destination.

General Info

Procure 12 MS25361-75 circuit breakers, zero-defect, mercury-free, compliant with MIL-STD and SAE AS58091, delivered to Tracy, CA by January 5, 2027.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335313 - Switchgear and Switchboard Apparatus ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-356X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Matthew Stanko
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT BREAKER
CIRCUIT BREAKER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE REQUIRED ITEM IS MS25361-75 MANUFACTURED BY A QUALIFIED QPD SOURCE
IAW AS58091. COMMERCIAL SUBSTITUTES ARE NOT ACCEPTABLE WITHOUT PRIOR
WRITTEN APPROVAL BY THE GOVERNMENT.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
SPE7M5-26-T-356X
SECTION B
ONLY ITEMS.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS58091 REVISION NR DTD 08/01/1999 PART PIECE NUMBER: MS25361-75
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS25361 REVISION NR DTD PART PIECE NUMBER: MS25361-75
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439960 0001 EA 12.000
NSN/MATERIAL:5925010801371
DELIVERY (IN DAYS):0147
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE7M5-26-T-356X
SECTION B
PR: 7017439960 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/05/2027 Original Required Delivery Date:12/21/2026
SPE7M5-26-T-356X NSN/Part Number: 5925-01-080-1371 Quantity: 12 EA Purchase Request: 7017439960QTY: 12 Delivery: 147 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335313
New
DIBBS
PUSH BUTTONThe solicitation for PUSH BUTTON under contract number SPE7M8-26-T-5627 seeks 75 units of the item with NSN 5930-12-359-1370, with a delivery requirement of 134 days after contract award. The procurement is governed by DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, where any technical or quality specifications marked with an R or I number must be consulted directly from the official DLA website. For this simplified acquisition, the version of the master list in effect on the solicitation issue date controls compliance. The offeror must provide a complete data package including detailed information for both the approved part and any alternate part. The contract is issued by the Department of Defense, specifically the Electrical Devices Division, with performance required at New Cumberland, PA, 17070-5002. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the NAICS code 335313 identifies it as falling under the manufacturing of electrical equipment. Primary point of contact is Kathleen Moore at the provided email and phone number, and all submissions must be made through the DIBBS system via the specified link.
ELECTRICAL DEVICES DIV

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKERThis contract is for the procurement of one circuit breaker, part number HQP3100H, with NSN 5925-01-690-2697, supplied by EATON ELECTRICAL INC. DBA CUTTLER 55588. The item must be delivered within ten days to the specified military destination at Schofield Barracks, Hawaii, under FOB origin terms with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 specifications, including defined preservative methods, container types, and marking requirements. The contract references DLA’s master list of technical and quality requirements for all specifications, and all packaging and palletization must conform to DLA’s procurement standards. The delivery is for government use only, with designated shipping and marking instructions tied to the military unit and delivery code W81B9W. The required delivery date is July 16, 2026, and the contract number is SPE7M5-26-T-356K. Technical compliance is governed by referenced standards incorporated through DLA’s official online repository, with revisions controlled according to acquisition size and amendment dates.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKERA circuit breaker with NSN 5925-01-606-8674 and part number IUGN66-1-51-7.50 is being procured under solicitation SPE7M5-26-T-356W with a quantity of 12 units to be delivered FOB origin in 147 days, with a required ship date of January 5, 2027, and an original delivery deadline of November 19, 2026. The unit price is $12.00 per unit, totaling $144.00, and no variance in quantity is permitted. Inspection and acceptance occur at the destination, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 using zero defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with DLA’s RP001 requirements, including MIL-STD-129 labeling and palletization; if hazardous per FED-STD-313, packaging must meet TQ requirement IP025, otherwise ASTM D3951 applies—but DLA requirements override it. The delivery address is the DLA Distribution facility in New Cumberland, PA, and transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation was posted July 28, 2026, with responses due by August 10, 2026, under NAICS code 335313 for federal procurement managed by the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
HANDLE, SWITCHThis contract pertains to the procurement of a single unit of a HANDLE, SWITCH with NSN 5930-01-621-4133, supplied by Eaton Corporation under part number SHB0N4X. Delivery is required within five days of award, FOB destination, with no tolerance for quantity variance and inspection and acceptance occurring at the destination. The item must be packaged per DLA-specific requirements, with hazardous materials adhering to TQ requirement IP025 and non-hazardous materials complying with ASTM D3951, though all DLA Master List of Technical and Quality Requirements supersede any conflicting commercial standards. Packaging must be labeled and marked per MIL-STD-129, palletized according to RP001, and shipped using traceable means—parcel post is strictly prohibited. The item is exempt from shelf life requirements and cannot contain any Class I ozone-depleting chemicals, regardless of specification language. All technical and quality controls referenced via R or I numbers are governed by the DLA Master List effective on the solicitation issue date. The delivery address is a U.S. Navy vessel in FPO AA 34087, and shipment must follow DLAD PROC NOTE C19 and C20. The required delivery date is July 27, 2026, and the contract is issued under solicitation SPE7M0-26-T-020Z with a response deadline of August 10, 2026, classified under NAICS code 335313 by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKERThe contract specifies the procurement of one circuit breaker, identified by part number EGB3025FFB and NSN 5925-01-720-0992, supplied by EATON AEROQUIP LLC. The item is classified as a commercial item and a critical application item, subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. It must comply with CMMC Level 2 Self-Assessment for cybersecurity and conform to MIL-STD-2073-1E packaging standards, including prescribed methods for preservation, wrapping, and containerization, with labeling adhering to MIL-STD-129 and no special marking required. The contract mandates delivery within 20 days f.o.b. origin, with zero variance allowed on quantity, and inspection and acceptance to occur at the destination. The shipment must be sent by the fastest traceable means, excluding parcel post, to the designated freight address at Naval Amphibious Base Coronado, California. The contract reference number is SPE7M5-26-T-356U, with a requirement for delivery no later than May 11, 2026, and the solicitation closed on August 10, 2026. All logistics, including the point of contact for inquiries, are governed by U.S. Department of Defense protocols, with specific codes for government use and distribution.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKERThe contract is for the procurement of 652 circuit breakers identified by NSN 5925-01-430-2318 under solicitation SPE7M5-26-T-356C, issued by the Department of Defense’s Active Devices Division. The item is classified as a commercial item description (CID), which allows for competitive procurement without requiring a Form 239, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Full and open competition is applicable, and government identification must be removed from any non-accepted supplies. Delivery is required within 134 days after award, with performance to occur in New Cumberland, Pennsylvania, under a U.S. federal contract. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the North American Industry Classification System code is 335313. Primary point of contact is Holly Bruns of DLA, reachable via email and phone number provided.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
PUSH BUTTONThe contract solicitation involves the procurement of one push button unit identified by NSN 5930-01-593-7158 under purchase request 7017643955, with a requirement for delivery within five days of award. The item is subject to the DLA Packaging Requirements for Procurement as outlined in RP001, and all technical and quality specifications referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements available on the DLA website. For this simplified acquisition, the version of the master list in effect on the solicitation issue date controls compliance. The offeror must provide a complete data package including details for both the approved part and any alternate part, even though no specific data is currently available for removal of government identification from non-accepted supplies. The solicitation number is SPE7M0-26-T-020P, posted on July 28, 2026, with responses due by August 10, 2026. The NAICS code is 335313, and the contracting activity is under the Department of Defense’s Maritime Supply Chain ESOC Buys, with performance required at Gatesville, Texas, ZIP 76528-0540. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided, and further details can be accessed through the DIBBS portal.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKERThis contract pertains to the procurement of three circuit breakers with NSN 5925014421517 and part numbers 813787D293 and HMCP030E0C from Eaton Corporation, supplied under solicitation SPE7M0-26-T-020G. The items must be delivered within five days of contract award to Fort Eustis, Virginia, FOB origin, with no variance allowed in quantity. Acceptance occurs at the destination point after inspection, and all packaging must comply strictly with MIL-STD-2073-1E and labeling requirements per MIL-STD-129, using packing code U and preserving methods specified as method 41. The shipment must be sent via the fastest traceable means excluding parcel post, and the freight and marking instructions direct delivery to W26RK4 at Bldg 1610, Fort Eustis, with a required delivery date of July 29, 2026. Hazardous material handling protocols are controlled under IP025, and the packaging must prevent any direct or intentional contact with mercury or mercury compounds, except for approved applications such as functional batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable fluorescent lamps and instruments. The contract incorporates all technical and quality standards referenced by R and I numbers in the DLA Master List of Technical and Quality Requirements, which governs compliance for both simplified and large acquisitions, with revisions controlled by the solicitation or amendment date. The unit of issue is each (EA), and pricing is fixed at a total contract value of $3.00 per unit. Specific government-use identifiers, project codes, and delivery tracking codes are provided, including ship reference M/F (TCN) W26RK462030095 and RDD 218. The contracting officer is Audrey Acuna of the Department of Defense’s Maritime Supply Chain ESOc Buys, with no set-aside classification indicated. The NAICS code is 335313, confirming classification as an electrical equipment manufacturing procurement. All documentation and compliance, including the restriction on mercury exposure, must be strictly adhered to, and any non-compliant items will be rejected upon delivery.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
PUSH BUTTON
ELECTRICAL DEVICES DIV

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKERThe contract is for the procurement of 16 circuit breakers with NSN 5925-01-122-5262 under solicitation number SPE7M5-26-T-355X, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days of award, and the solicitation closes on August 10, 2026, with a posting date of July 28, 2026. The NAICS code 335313 identifies the industry classification for electrical equipment manufacturing. The place of performance is designated as Kings Bay, Georgia, with a ZIP code of 31547-2631. The primary point of contact is Matthew Stanko, reachable via email and phone provided. The contract references DLA packaging requirements and incorporates technical and quality standards from the DLA Master List of Technical and Quality Requirements, which must be followed in accordance with the revision in effect on the solicitation issue date. All offerors must provide a complete data package for both the approved and alternate parts, and there are no exceptions for removing government identification from non-accepted supplies. This is a federal solicitation with no set-aside designation, open to all qualified respondents.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGEThe contract pertains to the procurement of 12 units of a FUSE, CARTRIDGE with NSN 5920-01-590-6397, classified as a commercial off-the-shelf item. Delivery is required within five days of award, and the solicitation number is SPE7M0-26-T-020N, issued on July 28, 2026, with responses due by August 10, 2026. The procurement follows DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date or amendment date for large acquisitions. Government identification must be removed from non-accepted supplies. The place of performance is Fort Eustis, Virginia, with a zip code of 23604-5577, and the purchasing agency is the Department of Defense under the Maritime Supply Chain ESOC Buys office. Primary point of contact is Audrey Acuna, reachable via email and phone. The NAICS code is 335313, indicating the industry classification for this procurement.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
BACKSHELL, ELECTRICAThe contract pertains to the procurement of a backshell electrical connector with NSN 5935015424395 and part number M85049/89-15W03, aligned with performance specifications based on SAE AS85049 Revision F dated April 1, 2021. The item is classified as a critical application and must be sourced exclusively from manufacturers or assemblers accredited and listed on the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List, accessible via eauditnet.com. It is subject to stringent quality and technical requirements mandated by the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with attributes assigned verification levels or AQLs based on their criticality. Compliance with the Qualified Products List for federal stock class 5935 is mandatory, and the use of any ozone-depleting substances in manufacturing or processing is strictly prohibited without explicit written approval from the contracting officer. The item must be packaged and labeled in strict accordance with MIL-STD-129 and DLA Packaging Requirements, with non-hazardous material packaged per ASTM D3951 unless superseded by DLA requirements. Hazardous material must adhere to FED-STD-313 and TQ requirement IP025. Palletization must follow RP001 guidelines. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The contract calls for exactly 54 units, with zero variance allowed, to be delivered within 126 days to DLA Distribution Cherry Point in North Carolina. The unit price is $54.00 per ea, totaling $2,916.00, with an original required delivery date of March 30, 2027 and a needed ship date of December 15, 2026. All documentation, including source approval requests and qualification records, must conform to DLA protocols, and the item is identified as covered defense information subject to applicable safeguards under RD003.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335312
New
DIBBS
RESOLVER, ELECTRICALThe contract pertains to the procurement of five electrical resolver units with NSN 5990-00-573-4731, under solicitation SPE7M5-26-T-355V, with a delivery requirement of 20 days after award. The supplier must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment. All supplies must adhere to DLA packaging guidelines, and any government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Documentation for source approval is mandatory, and the alternate offeror must submit a complete data package covering both the primary and alternate parts. The solicitation closed on August 10, 2026, and is managed by the Department of Defense’s Active Devices Division, with Jeanette Heisey as the primary point of contact.
Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
FUSEHOLDERThe contract pertains to the procurement of a FUSEHOLDER with NSN/Part Number 5920-01-019-0899, for a quantity of one unit, under Purchase Request 7017639033. Delivery is required within 20 days after order placement. The solicitation is issued under SPE7M5-26-T-356S, posted on July 28, 2026, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The place of performance is FPO with ZIP 96661, and the contracting activity is the Department of Defense’s Active Devices Division under NAICS code 335931. Primary point of contact is Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245. Government identification must be removed from non-accepted supplies in accordance with applicable DLA packaging standards.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
BACKSHELL, ELECTRICAThe contract specifies the procurement of a Backshell, Electrical, identified by NSN 5935-01-613-9813, with a quantity of three units, under solicitation SPE7M5-26-Q-0775. The item must comply with the SAE AS85049F Revision F dated 04/01/2021 and SAE AS85049/78C Revision C dated 11/01/2016, and is classified as a qualified product requiring compliance with the Qualified Products List (QPL) for Federal Stock Class 5935 connector assemblies and contacts. Pricing is firm fixed price with no variance allowed in quantity, and delivery is required within 90 days after award date. Inspection and acceptance occur at the destination point, with FOB origin terms applying. The item must be packaged per DLA Packaging Requirements, conforming to MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous materials, unless otherwise specified by DLA Master List requirements, which take precedence. Hazardous materials must meet FED-STD-313 and TQ requirement IP025. Palleted shipments must adhere to RP001 standards, and all packaging must be commercially compliant with no use of parcel post; traceable freight shipment is mandatory. The delivery address is the USCG Air Station in Elizabeth City, NC, with the required RDD of 191 and projected ship date of July 16, 2026. The contract includes mandatory technical and quality requirements referenced through R and I numbers from the DLA Master List, and all documentation must reflect the applicable revision in effect at the time of solicitation or award as defined by acquisition type.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, PLUG, ELThe contract is for the procurement of 56 connector bodies, plugs, with NSN 5935-01-318-3908, under solicitation SPE7M5-26-Q-0777, which is a total small business set-aside with NAICS code 334417. The delivery deadline is 135 days after award, and responses are due by August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Configuration changes require an Engineering Change Proposal and any variance must be formally requested. The item includes technical data subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including foreign nationals within the United States, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and DLA’s questionnaire, and have received formal authorization from DLA. The point of contact is Barbara Hoffmann of the Department of Defense’s Active Devices Division, and performance is scheduled for Texas, ZIP 75507-5000.
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTORThis contract is for the procurement of adapter and connector components identified by NSN 5935-01-104-3940 and part numbers from approved suppliers including Keysight Technologies, AMPHENOL, Coaxial Components, and Lockheed Martin, with a total quantity of 40 units. The item is classified as a commercial item and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and timeline. Mercury and mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and Navy-specified reagents, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and DLA-specific packaging requirements, with marking compliant to MIL-STD-129 and no special marking codes applied. Palletization follows DLA guidelines, and all items must be delivered FOB origin to Robins Air Force Base, Georgia, with a delivery window of 161 days from the contract award. Sampling and quality verification are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contract includes a zero variance tolerance on quantity, inspection and acceptance both occur at destination, and transportation logistics are governed by DLA procedural notes C19 and C20. The solicitation was issued on July 28, 2026, with a response deadline of August 10, 2026, and the required ship date is January 19, 2027.
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
DUMMY CONNECTOR, RECEPTThis contract specifies the procurement of a dummy connector receptacle with NSN 5935-01-250-0436, quantity of 721 units, under solicitation SPE7M5-26-T-356N. The item must conform to technical specifications MIL-DTL-38999/22J and MIL-DTL-38999N, with part number D38999/22JW, and is classified as a qualified item subject to the Qualified Products List for Federal Stock Class 5935. Manufacturing restrictions prohibit material produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016, as well as Bendix Corporation material with lot dates from January 1977 through February 1984. The use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless prior written approval is obtained from the Contracting Officer. The item is designated as a critical application and must comply with all DLA Master List of Technical and Quality Requirements which supersede commercial packaging standards such as ASTM D3951. All packaging must follow MIL-STD-129 labeling and RP001 DLA packaging requirements, with palletization adhering to specified guidelines. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025. Delivery is FOB origin with zero variance allowed in quantity and must be completed within 161 days, with an original required delivery date of December 26, 2026, and a need ship date of January 19, 2027. Inspection and acceptance occur at the destination point. The sole designated delivery location is the DLA Distribution Depot in Tinker AFB, Oklahoma. The unit price is $721.00 per unit, totaling $519,921.00. Traceability documentation may be required to verify the manufacturing date and source, and all materials must be properly marked and identified per RQ017. The contract explicitly excludes commercial items as defined in FAR 11.001 and unnumbered parts. The point of contact for inquiries is Corey Carter of the Department of Defense’s Active Devices Division, with the solicitation posted on July 28, 2026, and response due
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
ANTENNAThe contract involves the procurement of 55 antennas with NSN 5985-01-588-2486 under solicitation SPE7M5-26-T-356H, issued by the Department of Defense’s Active Devices Division. The requirement is a Total Small Business Set-Aside under NAICS code 334220, restricting eligibility to small businesses as defined by the SBA. Delivery must be completed within 20 days after order placement at the specified performance location in Elizabeth City, North Carolina, with a zip code of 27909-5001. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The contract incorporates all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation issue date or any subsequent amendment. Removal of government identification from non-accepted supplies is mandated, and offerors must submit a complete data package covering both the primary and alternate parts. Primary point of contact is Matthew Stanko, reachable via email and phone listed in the contract data.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
KEYBOARD, DATA ENTRYThe contract is for the procurement of one keyboard, data entry model DU-5K-TB-USB with NSN 5999016783599, issued under solicitation SPE7M5-26-T-356J by the Department of Defense’s Active Devices Division. The item must be delivered within 20 days of contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping, and cushioning standards, while marking must follow MIL-STD-129 with no special marking code applied. Palletization and parcel shipment instructions are strictly defined, and the delivery address is the Naval Amphibious Base Coronado in San Diego, California, with explicit instructions to avoid parcel post and ship by the fastest traceable means. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with revisions controlled based on the acquisition type and applicable amendment dates. The purchase request number is 7017639009, and the unit price is $1.00, resulting in a total price of $1.00. The required delivery date is July 23, 2026, and the solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026. The NAICS code is 335999, and the point of contact is Margaret Smith, reachable at 614-693-1671 or margaret.j.smith@dla.mil. The shipment is associated with project ZH9 TP 2 and government-use codes including IPD 05, DIC A4A, and FC VO. A link to the DIBBS portal is provided for additional solicitational details, and the unit of issue is EA, confirmed through the official DoD unit of issue reference document.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
DUMMY CONNECTOR, RECThe contract is for the procurement of five dummy connectors, part number 650-075M with NSN 5935-01-733-5760, under solicitation SPE7M5-26-T-356M, issued by the Department of Defense’s Active Devices Division. The unit price is $5.00 per unit, with a total contract value of $25.00, delivered FOB origin in a quantity variance of plus or minus zero percent. Delivery is required within 15 days of contract award, with an original required ship date of August 26, 2026. Inspection and acceptance both occur at the destination facility. All packaging and labeling must comply with MIL-STD-129 and DLA Packaging Requirements (RP001), and materials must be commercially packaged per ASTM D3951 unless classified hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, take precedence over any commercial standards. Deliveries must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation instructions referenced from DLAD Proc Notes C19 and C20. The contract specifies the unit of issue as each (EA) and a quantity per unit pack of one. The point of contact is Andrew Bracken, reachable via email and phone provided.
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThis contract pertains to the procurement of an electrical connector receptacle designated by NSN 5935015098688, with two line items each for one unit, to be delivered to two U.S. Navy vessels — USS ILLINOIS SSN-786 and USS NORTH CAROLINA SSN-777 — with a mandatory delivery window of 20 days and FOB destination terms. All items must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA-specific palletization guidelines, with no variance permitted in quantity. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and procurement is governed by the revision in effect on the solicitation or award date, depending on acquisition size. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing unless prior written approval from the contracting officer is secured, and mercury or mercury-containing compounds are banned from direct contact with the item except in specific, exempted applications such as functional components in batteries, instruments, or weapon systems, which must additionally meet Navy-issued containment standards. Suppliers must provide official documentation from the approved manufacturer for any administrative part number changes or superseding replacements, and only authorized sources may be offered without disqualification. The contract is issued under the DoD authorized unit of issue, and vendor compliance with shipping details, including correct freight addresses and VSM usage, is required. Delivery is due no later than July 23, 2026, and all shipments must adhere to specified transportation protocols outlined in DLAD procedure notes.
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details