Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CLOSEOUT PANEL ASSE

Active
SPE8E5-26-T-3882Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a Closeout Panel Assembly with part number 5-4-4790 and NSN 5411-01-226-4671, under solicitation SPE8E5-26-T-3882, with a total quantity of 10 units to be delivered FOB origin within 139 days. The item is subject to a comprehensive set of technical and quality requirements sourced from the DLA Master List of Technical and Quality Requirements, which govern material compliance, packaging, and inspection. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization governed by DLA Packaging Requirements (RP001). The contractor is required to provide a Certificate of Quality Compliance (CoQC) and retain supply chain traceability documentation in accordance with DLA Directive Procurement Note C03. All components must be sourced from qualified manufacturers listed on applicable QPLs or QMLs, and no mercury or mercury compounds may be intentionally introduced except under narrowly specified exceptions. Safety Data Sheets (SDS) and HCS-compliant labels must be submitted for review prior to award, conforming to OSHA’s Globally Harmonized System standards. The contract prohibits FAT testing for repair parts but mandates qualification test reports. Drawings referenced in the TDP are accessible only during solicitation via DIBBS, and final assembly must meet revisions specified in the Technical Data Package. The contract is a Total Small Business Set-Aside under NAICS code 331315, with responses due by August 17, 2026, and delivery must be completed by March 31, 2027. The contractor must not ship until formally released in writing by the contracting officer, administrative office, or designated representative. All deliveries must be shipped to the DLA Distribution facility in New Cumberland, PA, with parcel post and freight shipping instructions provided. Cybersecurity Compliance is required at CMMC Level 2 through a self-assessment, and government identification must be removed from any non-accepted supplies. The contracting office has no authority to waive or alter requirements without written amendment, and all documentation—including CoQC, traceability records, and SDS—must be emailed to specified addresses in Blocks 6, 24, and 7 of the contract. The unit of issue is EA, with no variance allowed in quantity, and all markings, labeling, and packaging must strictly

General Info

Procure 10 Closeout Panel Assemblies, FOB origin, by March 31, 2027, per DLA technical, packaging, and cybersecurity requirements.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

331315 - Aluminum Sheet, Plate, and Foil ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE8E5-26-T-3882 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Don Trachtman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLOSEOUT PANEL ASSE
CLOSEOUT PANEL ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAGE: 81337 U.S. ARMY NATICK R<(>&<)>D CTR
PN: 5-4-4790
UI = EA
QUP = 001
RD002, COVERED DEFENSE INFORMATION APPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
SPE8E5-26-T-3882
SECTION B
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
CDRL-COQC-21026 Applies
NOTE: Awardees DO NOT SHIP until Released in writing by the PCO, ACO, Local Admin or Designated Representative. Remit CoQC/Traceability to the PCO at the Email in Block 24 of the Contract and the Local Admin at the Email in Block 6 of the Contract. If Block 7 Administered By is other than DLA, also provide a copy to them. Address any questions to the PCO, Local Admin, or DCMA as applicable.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R.
SPE8E5-26-T-3882
SECTION B
1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
Engineering Notes: DWG 5-4-4785 Note 2: FAT not required for Repair Parts. Qualification Test Reports still applies. DWG 5-4-4786 Note 2: FAT not required for Repair Parts. Qualification Test Reports still applies. DWG 5-4-4788 Note 2: FAT not required for Repair Parts. Qualification Test Reports still applies. DWG 5-4-4789 Note 2: FAT not required for Repair Parts. Qualification Test Reports still applies.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
TDP Rev B Gen 2 IAW BASIC DRAWING NR 81337 5-4-4790 REVISION NR M DTD 09/24/2013 PART PIECE NUMBER: 5-4-4790
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4845 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4860 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4512 REVISION NR F DTD 04/26/2023 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4554 REVISION NR C DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4570 REVISION NR C DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4754 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4755 REVISION NR B DTD 06/29/2006 PART PIECE NUMBER:
SPE8E5-26-T-3882
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4784 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4788 REVISION NR E DTD 10/10/2017 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4804 REVISION NR C DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-5063 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4798 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-5159 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-5163 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4247 REVISION NR R DTD 12/08/2017 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4715 REVISION NR G DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4840 REVISION NR D DTD 10/28/1997 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4785 REVISION NR E DTD 10/10/2017 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4786 REVISION NR E DTD 10/10/2017 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4795 REVISION NR J DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4797 REVISION NR C DTD 09/24/2013 PART PIECE NUMBER:
SPE8E5-26-T-3882
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4839 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4841 REVISION NR D DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-5062 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-6922 REVISION NR B DTD 09/13/2024 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4789 REVISION NR E DTD 10/10/2017 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4790 REVISION NR L DTD 12/18/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-6919 REVISION NR C DTD 12/01/2017 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-6917 REVISION NR DTD PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4791 REVISION NR E DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4790 REVISION NR DTD 04/08/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-5158 REVISION NR B DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 5-4-4784 REVISION NR E DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 17-2-1991 REVISION NR DTD 09/24/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
SPE8E5-26-T-3882
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81337 17-1-6626 REVISION NR C DTD 09/15/2020 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE SPEC NR MIL-PRF-26514G REVISION NR G DTD 08/01/1995 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE SPEC NR MIL-DTL-5541F NOT 2 REVISION NR F DTD 02/07/2024 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD ASTM B209/B209M REVISION NR A DTD 12/01/2021 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD SAE AMS-S-8802F REVISION NR F DTD 10/01/2022 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD ASTM E874 REVISION NR DTD 09/01/2011 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017423338 0001 EA 10.000
NSN/MATERIAL:5411012264671
DELIVERY (IN DAYS):0139
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE8E5-26-T-3882
SECTION B
PR: 7017423338 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/04/2027 Original Required Delivery Date:03/31/2027
SPE8E5-26-T-3882 NSN/Part Number: 5411-01-226-4671 Quantity: 10 EA Purchase Request: 7017423338QTY: 10 Delivery: 139 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331315
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1955
This contract mandates the procurement of titanium alloy sheet metal, specifically 0.012 inch thick, 36 inches wide, and 96 inches long, in a hot rolled, annealed, and descaled condition, weighing approximately 6.759 pounds per sheet, conforming to SAE AMS4911T and AMS4907M standards for alloy 6Al-4V and 6Al-4V (ELI) in annealed condition. The material must be supplied in whole foot lengths only and meet exact dimensional specifications—no test coupons are permitted. Every unit must be clearly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions, using only approved methods such as stenciling or stamping that ensure legibility, permanence, and non-contamination. A Certificate of Quality Compliance, including mill material certification, must accompany each shipment and be forwarded to the contracting officer. The product is designated as a critical application item with strict compliance requirements under the Qualified Suppliers List for Distributors (QSLD) program, meaning only suppliers listed on the QSLD are eligible to bid, and any deviation or substitution may result in criminal penalties. No source inspection is waived for QSLD-compliant suppliers, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging rules, including robust edge and corner protection, full fiberboard coverage, and MIL-STD-129 marking. Shipment is to be delivered FOB origin to Robins AFB, Georgia, within 113 days, with no tolerance for variance in quantity, and must be palletized with specified material protections.
WARNER ROBINS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331315
New
DIBBS
PIN ASSY
Solicitation # SPE8E5-26-T-3845
The contract pertains to the procurement of a PIN ASSY with the NSN 5411-01-529-9190 and part number 16500955, requiring 95 units delivered within 167 days of award. The product must strictly comply with the exact specifications named in the purchase order text, as only the identified entity and part number are deemed acceptable under DLA guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the governing revision determined by the solicitation issuance or award date depending on the acquisition size. Packaging must adhere to DLA packaging standards, and all non-accepted supplies must have government identification removed prior to return. The solicitation is a total small business set-aside under NAICS code 331315, issued by DLA Dist San Joaquin under solicitation number SPE8E5-26-T-3845, with a response deadline of August 17, 2026. The point of contact is Don Trachtman, and performance is required at Tracy, CA, 95304-5000. The item has no shelf life restriction.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331315
New
DIBBS
POLE, LIGHT SUPPORT
Solicitation # SPE8E5-26-T-3811
The contract pertains to the procurement of 47 units of POLE, LIGHT SUPPORT with NSN 5411-01-529-9288 under solicitation SPE8E5-26-T-3811, issued by the Defense Logistics Agency through a total small business set-aside. The total contract value is $2,209.00 at a unit price of $47.00 per unit, with delivery required within 167 days of the award, targeting an original delivery date of May 4, 2027 and a need ship date of February 1, 2027. Delivery is FOB origin, with inspection and acceptance occurring at the destination facility located at DDSP New Cumberland, 2083 Normandy Drive, New Cumberland, PA 17070-5002. Packaging must adhere strictly to MIL-STD-2073-1E with specific preservation methods including cling/dry (method 10), aluminum film wrap, and unit packaging in fiberboard boxes, while labeling and marking must fully comply with MIL-STD-129, including required barcodes and no special marking designation. The contract includes all required DFARS and FAR clauses related to cybersecurity, trafficking in persons, employment eligibility, hazardous materials, sustainable products, and safeguarding covered defense information, with supplemental DLA packaging and procedural requirements referenced. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and all invoices must be submitted electronically via Wide Area WorkFlow. The contracting officer’s representative and payment office details will be assigned post-award, and no options or additional line items are present. Offerors must be registered in SAM, hold a valid UEI and CAGE code, and affirm small business status and any applicable socioeconomic certifications. Electronic submission through the DLA Internet Bid Board System (DIBBS) is mandatory, with a response deadline of August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331315
New
DIBBS
ALUM SHEET 2024-T3 ALC
Solicitation # SPEFA1-26-Q-0102
Aluminum sheet meeting SAE AMS-QQ-A-250/5 specification (2024-T3 ALC) is required at a thickness of 0.016 inches, width of 48 inches, and length of 12 feet, with a total quantity of 12 linear feet to be delivered under solicitation SPEFA1-26-Q-0102. All material must originate from the same heat lot and include mandatory documentation as specified by RA001, RP001, RQ002, ZD088, RQ017, ZD080, and RS002 object text IDs in English. The contract imposes a firm fixed price with zero variance tolerance on quantity, requiring full compliance and no deviations. Inspection and acceptance occur at destination, with delivery expected within four days after delivery order. Packaging must conform to ASTM D3951 and MIL-STD-129 labeling standards, adhering strictly to DLA packaging requirements RP001, and palletization must follow designated guidelines. The unit of issue is linear feet, and the shipment must be sent via the fastest traceable means—parcel post is prohibited. The freight shipping address is DLA Receiving Officer at Naval Base Coronado, while the parcel post address listed is for reference only and not to be used. The material is intended for government use with assigned NSN 9535-LL-GGD-0044, linked to purchase request 7017692111 and a mandatory ship date of August 4, 2026. Contact for inquiries is Cynthia Liles with the Department of Defense.
DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 331315
New
DIBBS
ROLLER ASSY OD
Solicitation # SPE8E5-26-T-3816
The contract pertains to the procurement of ROLLER ASSY OD with NSN 5411015299175, under solicitation SPE8E5-26-T-3816, which is a total small business set-aside under NAICS code 331315. The item quantity is 15 AY units, to be delivered FOB origin within 167 days of contract award, with no variance permitted in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and take precedence over ASTM D3951 packaging standards. Packaging and labeling must comply with MIL-STD-129 and DLA Packaging Requirements (RP001), including palletization guidelines, with government identification removed from non-accepted supplies per RQ011. Inspection and acceptance occur at destination, and the delivery point is DLA Distribution Red River, Receiving Building 499, Texarkana TX 75507-5000. The original required delivery date is January 27, 2027, with a needed ship date of February 1, 2027. Transportation provisions reference DLAD Proc Notes C19 and C20, and the contract emphasizes the handling of Covered Defense Information where applicable. The point of contact is Don Trachtman, with solicitation posted on August 5, 2026, and responses due by August 17, 2026.
RED RIVER RECEIVING BLDG

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331315
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1980
The contract specifies the procurement of aluminum alloy 6061 in T-651 temper condition, formatted as metal plates measuring 0.250 inches thick, 48 inches wide, and 144 inches long, with a total weight of approximately 169.34 pounds per piece. The material must strictly adhere to dimensional tolerances with no test coupons permitted and must be supplied in whole-foot lengths only. Full compliance with technical and quality requirements listed in the DLA Master List is mandated, including the application of the Qualified Suppliers List for Distributors (QSLD), which restricts award eligibility to suppliers listed on the QSLD; non-compliant bids must explicitly state their deviation. The product must be accompanied by a Certificate of Quality Compliance with each shipment, and continuous identification markings are required on every unit, including the DLA contract number, NSN, specification revision, alloy and temper designation, manufacturer details, heat and lot numbers, and dimensions. Markings must be applied via stamping or stenciling, remain legible, waterproof, and non-contaminating. Packaging must conform to MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation code ZZ, and all labeling must follow MIL-STD-129R. The material is subject to destination inspection and acceptance, with zero variance allowed on quantity. Three separate delivery line items total 53 pieces to be shipped to three DLA distribution facilities—Warner Robins, New Cumberland, and Tinker AFB—with required ship dates between October 2026 and the original delivery deadline of September 29, 2026. Compliance with all contractual documentation, including CDRL-METALSCERT and technical data packages referencing SAE AMS4027P, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R, is mandatory, and failure to meet requirements may result in rejection or criminal penalties.
WARNER ROBINS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331315
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-Q-0644
The contract specifies the procurement of a single aluminum alloy plate measuring 5.000 inches thick, 48 inches wide, and 12 feet long, weighing 3525.12 pounds per piece, made from AMS 4050 alloy 7050 in the T-7451 temper condition, manufactured via a rolled process. The item is identified by NSN 9535-01-421-2014, with a required quantity of ten pieces, delivered under a firm fixed price term with zero variance allowance. All units must be supplied in whole-foot lengths only and are subject to exact dimensional tolerances, with mandatory continuous identification markings including the DLA contract order number, NSN, specification revision, alloy and temper designation, manufacturer details, heat and lot numbers, and full dimensions. Markings must be stamped or stenciled with legible, waterproof, and non-contaminating inks, adhering to MIL-STD-129 and DLA packaging standards outlined in MIL-STD-2073-1E, with preservation methods per ASTM B660. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement constitutes a noncompliant bid with potential criminal penalties. A Certificate of Quality Compliance, including mill material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. This procurement waives government source inspection requirements for QSL-compliant suppliers, shifting responsibility to manufacturer quality assurance under standards including QAP-EQ003 and ASQ H1331. Packaging must comply with specified Preservation, Packaging, and Marking methods, and shipments must be labeled with both primary and secondary units of measure when applicable. The delivery is due within 60 days after award, with destination inspection and acceptance, and the item is designated for delivery to DLA Distribution Warner Robins, Georgia. The solicitation is a total small business set-aside, with technical compliance governed by referenced standards including SAE AMS4050K, ASTM B666/B666M-20, and ASTM B660-23.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
BAR, LOAD CONSTRAINT
Solicitation # SPE8E5-26-T-3826
The contract pertains to the procurement of an item identified by NSN 5411015298384 and part number 16501289-002 under solicitation SPE8E5-26-T-3826, issued as a Total Small Business Set-Aside with a NAICS code of 331315. A quantity of 35 units, measured in the unit of issue AY, is to be delivered FOB origin within 167 days from the required delivery date of May 4, 2027, with no variance permitted in quantity. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 Packaging Requirements, and all technical and quality specifications from the DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. The item must be labeled and marked accordingly, and delivery is directed to the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, and the supplier must adhere to applicable environmental and defense information protocols. The contract includes required shipping and parcel post addresses, and transportation details reference DLAD Proc Notes C19 and C20. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and the point of contact is Don Trachtman of the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 331315
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-T-11KL
The contract is for the procurement of 352 units of INSERT, SCREW THREAD under NSN 5325-00-888-9397, solicited by the ASC Commodities Division of the Department of Defense. The solicitation number is SPE4A6-26-T-11KL, with a response deadline of August 11, 2026, and a delivery requirement of 194 days after award. All items must comply with current revisions of applicable military or consensus non-government standards, and only hardware manufactured to the latest version of the defining standard after the solicitation date is acceptable. Past production to previous revisions remains valid for existing inventory, but new production must meet the current standard. The item is subject to MIL-STD-130N for identification marking of U.S. military property, requiring proper government identification labeling. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which governs compliance based on the solicitation issue date for simplified acquisitions. Place of performance is Tracy, California, 95304-5000, with Tywanda Maddox Addington listed as the primary point of contact. The procurement is unrestricted and falls under NAICS code 331315 for steel forging and stamping.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 331315
New
DIBBS
HOUSING, LATCH PAN A
Solicitation # SPE8E5-26-T-3746
The contract is for one unit of a Housing, Latch Pan Assembly identified by part number 5599908-19 and NSN 5411-01-375-3695, with a requirement for delivery within 20 days after award. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through an accredited third-party assessment organization, and packaging must adhere to DLA-specific guidelines. The supply is classified as covered defense information and is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. entities. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the technical data. The solicitation number is SPE8E5-26-T-3746, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 331315, and performance is designated for FPO with ZIP 96667. The primary point of contact is Don Trachtman, reachable via email and phone provided, and the contract is managed by the Defense Logistics Agency under the Department of Defense.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 331315
New
DIBBS
PLATE METAL 4 X 48 X 4
Solicitation # SPEFA5-26-Q-0067
The contract specifies the procurement of plate metal in accordance with MMS-1420, equivalent to AMS4050 Rev K, made from 7050-T7451 aluminum alloy with dimensions of 4 inches by 48 inches by 48 inches. A total of 48 pieces are required under solicitation SPEFA5-26-Q-0067, with a firm fixed price and zero tolerance for quantity variance. All materials must be packed in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA packaging requirements, and shipped by the fastest traceable means—parcel post is prohibited. The delivery destination is Fleet Readiness Center East at Cherry Point, North Carolina, with an acceptance point at destination and a 30-day delivery window from award. A Certificate of Quality Conformance is mandatory, and metal certification data must comply with applicable CDRLs and the DLA Master List of Technical and Quality Requirements, which supersede all other standards. Sampling must meet MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and inspection is performed upon arrival. The item has no shelf life and is identified by NSN 9535-LL-NCA-3083 with a required delivery date of July 23, 2026.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 331315
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A7-26-T-603G
The contract pertains to the procurement of 8 units of a screw thread insert with part number CA17088 and NSN 5325-01-296-3741, sourced from Alcoa Global Fasteners Inc in Torrance, CA. The solicitation number is SPE4A7-26-T-603G, issued on July 30, 2026, with responses due by August 7, 2026, and delivery required within 229 days after order. The item falls under NAICS code 331315 and is being acquired by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance to occur in Tracy, CA, ZIP 95304-5000. The supplier must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemically defined reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies. The primary point of contact for the solicitation is Naron Sanderlin, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

7 days ago

DEADLINE

in about 17 hours
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 493190
New
DIBBS
Specialized Packaging and Labeling ServicesThe contract requires specialized packaging, preservation, labeling, and bar-coding services for precision milling cutters in full compliance with MIL-STD-129, ASTM D3951, and RP001 standards, ensuring all items meet Department of Defense requirements for durable, traceable, and environmentally protected shipment. The work must include proper identification through standardized labeling and bar-code systems that enable seamless integration into DLA’s distribution network, with strict adherence to military and industry specifications for material preservation during transit and storage. Performance is to be executed at the New Cumberland, Pennsylvania facility with a zip code of 17070-5002, and the task is structured as a subcontract under NAICS code 493190. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the agency issuing the requirement being the Department of Defense through the DDSP New Cumberland Facility. All submissions must satisfy technical and procedural criteria mandated for federal defense logistics operations.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332211
New
DIBBS
Precision Milling Cutter SupplyThe contract solicits the manufacture and supply of precision milling end cutters with part number MDRHEC750S4150 and NSN 3455013756732, requiring strict adherence to federal packaging, labeling, and delivery standards. The item is intended for use by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY, with performance specifically located in NEW CUMBERLAND, ZIP 17070-5002. This is a subcontract under NAICS code 332211, which classifies the industry as forging and stamping, indicating that the supplier must possess the technical capability to produce high-precision metal cutting tools meeting military-grade specifications. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, providing potential vendors a 12-day window to submit proposals. The contract does not specify a set-aside classification, meaning it is open to general competition without preference for small, veteran-owned, or other designated business categories. All deliveries must be fully compliant with federal requirements and routed to the designated performance location.
Cutlery and Flatware (except Precious) Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
Supply of Reflective Tape (Red, 6 Inches Wide, 1800 Inches per Roll)The contract entails the procurement and delivery of 158 rolls of red reflective tape, each measuring 6 inches in width and containing 1,800 inches of material, fully compliant with federal standards for reflectivity, durability, and use in hazardous material labeling. The tape must meet stringent performance criteria to ensure visibility and safety in critical applications, particularly within defense and transportation environments. The requirement is part of a subcontract under a Women-Owned Small Business Set-Aside, designated by NAICS code 325520, and is being managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance of this contract is required to take place at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted no later than August 17, 2026. All submissions must adhere to federal specifications ensuring the product's reliability under demanding conditions, and the award will be restricted to certified Women-Owned Small Businesses as mandated by the set-aside classification. The contract details are accessible via the DIBBS platform at the provided link, and timely compliance with delivery and quality requirements is essential for successful contract execution.
Adhesive Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Regulatory Compliance – Hexavalent Chromium Prohibition (DFARS 252.223-7008)The contract requires verification and certification that all valves and their packaging strictly comply with the Department of Defense’s prohibition on hexavalent chromium as mandated by DFARS 252.223-7008. This regulatory requirement ensures that no components or packaging materials contain hexavalent chromium, a toxic substance restricted under federal defense contracting standards. The subcontractor must provide documented proof of compliance, confirming through testing, material declarations, or supply chain controls that the delivered items meet the chemical restrictions outlined in the regulation. The solicitation is classified as a subcontract under NAICS code 541380, with a response deadline of August 17, 2026, and was posted on August 5, 2026. Performance is required at the New Cumberland facility with a zip code of 17070-5002, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. Compliance is non-negotiable, and any failure to certify or substantiate the absence of hexavalent chromium will result in rejection of the submission. The contract emphasizes supply chain transparency and technical accuracy, placing responsibility squarely on the subcontractor to deliver certified, compliant products without exception.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery Logistics (FOB Destination)The contract pertains to the transportation and delivery of a valve to the DDSP New Cumberland Facility under FOB Destination terms, meaning the seller assumes all risk and cost of shipping until the item reaches the designated delivery point in New Cumberland, Pennsylvania, with the ZIP code 17070-5002. The NAICS code 484220 classifies this as a freight transportation activity, specifically for trucking services focused on special freight. The contract is structured as a subcontract and was posted on August 5, 2026, with a response deadline of August 17, 2026. The acquiring agency is the Department of Defense through its DDSP New Cumberland Facility, located in New Cumberland, though no specific office address or point of contact details are provided. Interested parties must submit their proposals via the designated DIBBS platform before the deadline to be considered for award.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-129 Packaging and Labeling ServicesThe contract requires full compliance with MIL-STD-129 for the packaging, marking, and labeling of military shipments destined for the Department of Defense, specifically managed by the DDSP NEW CUMBERLAND FACILITY. All activities must meet stringent DLA logistics standards to ensure accurate identification, tracking, and handling of materiel throughout the military supply chain. The work involves precise application of barcodes, uniform labeling formats, and secure packaging methods as dictated by the military standard to maintain interoperability and readiness across defense operations. This is a subcontract opportunity with a NAICS code of 493190, indicating it relates to other support activities for warehousing and storage. The proposal response deadline is August 17, 2026, and performance will be conducted at the New Cumberland facility with ZIP code 17070-5002. The solicitation is listed on the DIBBS platform and is part of ongoing efforts to uphold standardized logistics procedures within the military infrastructure, with no specific set-aside provisions indicated.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract pertains to the preparation and submission of Safety Data Sheets (SDS) and hazard labels aligned with OSHA and DFARS regulatory standards, ensuring full compliance for hazardous materials managed by the Department of Defense. Work must be performed at the NEW CUMBERLAND facility with a ZIP code of 17070-5002, and the solicitation is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services. The opportunity was posted on August 5, 2026, and responses are due by August 17, 2026, requiring timely submission of technical and regulatory documentation that meets federal defense specifications for chemical safety communication. All deliverables must adhere strictly to OSHA’s Hazard Communication Standard and DFARS requirements, meaning SDS formats, classification criteria, and labeling elements must reflect current federal mandates. The responsibility includes accurate hazard identification, standardized sections in SDS documents, and proper placement of pictograms and signal words on labels. While no specific set-aside status is indicated, the work is tied directly to the Defense Logistics Agency’s operations at the New Cumberland facility, underscoring the need for precise execution to support federal supply chain safety and regulatory accountability. Participation requires proven expertise in hazardous materials documentation and familiarity with DoD procurement protocols.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332913
New
DIBBS
Commercial Valve Supply – Check Valve (NSN 4820013398489)The contract calls for the supply of one commercial off-the-shelf check valve identified by NSN 4820013398489, manufactured to meet military specifications. The item is categorized under NAICS code 332913, indicating it falls within the manufacturing of other fabricated metal product industries, and is being procured as a subcontract under the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, providing a twelve-day window for submissions. Performance of the contract is to be fulfilled at the New Cumberland facility, with a zip code of 17070-5002, though no specific city or state is listed for the agency's office address. The contract is managed by the DDSP New Cumberland Facility, and interested parties may access further details via the provided DIBBS link.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
New
DIBBS
Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on August 5, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under the Department of Defense. It is associated with the DDSP NEW CUMBERLAND FACILITY and has a place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002. No solicitation number, NAICS code, set-aside type, organization type, or point of contact information is available, and the system was unable to extract potential subcontract opportunities due to technical timeouts. The contract is accessible via the DIBBS website for further details, though critical components necessary for full transparency and opportunity identification remain incomplete.

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541511
New
DIBBS
Electronic Invoicing and Receiving Reporting via WAWF
Custom Computer Programming Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Safeguarding
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 811411
New
DIBBS
Marking and Shipment Labeling
Home and Garden Equipment Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 11 days
View Details