Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COMPRESSOR, RECIPROC

Active
SPE7M1-26-T-244ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of seven reciprocating compressors with NSN 4310-01-680-8302 and part number 130009-211, issued under solicitation SPE7M1-26-T-244Z by the Department of Defense through the Maritime Supply Chain. The requirement is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses, with a delivery deadline of 220 days from the award date and a required delivery date of October 14, 2026, though the need ship date is March 22, 2027. The units are to be delivered FOB origin with zero variance allowed in quantity and are subject to inspection and acceptance at the destination. Technical and quality standards are defined by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and packing codes. Marking must adhere to MIL-STD-129 with no special marking required, and palletization follows DLA packaging guidelines. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation handled per DLA procedural notes C19 and C20. The unit price is $7.00 per unit for a total contract value of $49.00.

General Info

Seven reciprocating compressors awarded to service-disabled veteran-owned small business, delivery due October 14, 2026, FOB origin, $49 total.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

333912 - Air and Gas Compressor ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SDVOSBC

Documents

(1)

RFQ SPE7M1-26-T-244Z for DLA Maritime Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COMPRESSOR,RECIPROC
COMPRESSOR,RECIPROCATING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
HYDRAULICS INTERNATIONAL, INC. 56529 P/N 130009-211
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017527818 0001 EA 7.000
NSN/MATERIAL:4310016808302
DELIVERY (IN DAYS):0220
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:BL CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:D
UNIT CONT:FC OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M1-26-T-244Z
SECTION B
PR: 7017527818 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/22/2027 Original Required Delivery Date:10/14/2026
SPE7M1-26-T-244Z NSN/Part Number: 4310-01-680-8302 Quantity: 7 EA Purchase Request: 7017527818QTY: 7 Delivery: 220 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333912
New
DIBBS
ACTUATOR, DIAPHRAGM
Solicitation # SPE7M1-26-T-245F
The contract is for the procurement of three diaphragm actuators with part number 4310-01-289-1658 under solicitation SPE7M1-26-T-245F, issued as a total small business set-aside with NAICS code 333912. Delivery is required within 158 days of award, with a firm delivery deadline of January 19, 2027, and the items must be shipped FOB origin. The product is classified as a critical application item manufactured by Curtiss-Wright Electro-Mechanical Corp. Compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-C-3600, is mandatory, with preservation method ZZ requiring Level A preservation. Packaging and marking must adhere strictly to MIL-STD-129 and RP001 requirements, with no special marking codes applied. The contract prohibits the use of Class I ozone-depleting chemicals in any component and bans the intentional addition of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lamps, sensors, and authorized instruments under NAVSEA 5100-003D, which must include a second boundary of containment. All deliveries must be inspected and accepted at the destination, with zero variance allowed in quantity. The designated delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation is governed by DLAD procedural notes C19 and C20. The solicitation was issued on August 2, 2026, with a response deadline of August 13, 2026, and the point of contact is Michael Reese of the Department of Defense Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
FILTER ASSEMBLY, FLU
Solicitation # SPE7M1-26-T-243W
The contract pertains to the procurement of one FILTER ASSEMBLY, FLU with NSN 4310-01-711-7657 and part number A77-19021, supplied by RIX INDUSTRIES, under solicitation SPE7M1-26-T-243W. Delivery is required within 20 days of contract award, with FOB origin terms and zero variance allowed in quantity. The item must be delivered to the specified destination, where inspection and acceptance occur, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. Ozone-depleting chemicals are strictly prohibited in manufacturing or incorporation, necessitating approved substitutes whenever specifications permit. The unit of issue is each, and shipment must be sent via the fastest traceable means, excluding parcel post, with delivery directed to the submarine base in Groton, CT, and final destination at FPO AE 09592-1200. The required delivery date is July 29, 2026, and the contract incorporates all technical and quality requirements referenced in the DLA Master List, with revisions controlled by the solicitation issue date. Government-use identifiers are restricted to authorized documentation only.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
PARTS KIT, COMPRESSOR
Solicitation # SPE7M1-26-T-245N
This contract pertains to the procurement of a Parts Kit for a four-stage, four-cylinder Worthington air compressor, identified by NSN 4310011702404 and part number KIT-5003, with approved suppliers including Curtiss-Wright Electro-Mechanical Corp and Siemens Energy, Inc. The contract mandates strict adherence to DLA packaging and preservation standards per MIL-STD-2073-1E Appendix D for kits, requiring packaging marked in accordance with MIL-STD-129 and palletization compliant with DLA’s procurement requirements. All items must be delivered FOB origin within 158 days of contract award, with no tolerance for quantity variance, and are subject to inspection and acceptance at the destination. The delivery address is DLA Distribution San Diego, with required shipping and transportation procedures outlined in DLAD Proc Notes C19 and C20. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specified functional applications like batteries or instruments under NAVSEA guidelines, which must include secondary containment. Configuration changes require formal engineering change proposals or variance requests, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The unit of issue is kilo (KT), with a single unit ordered at a total price determined by the unit price. The solicitation number is SPE7M1-26-T-245N, issued under NAICS 333912, with a response deadline of August 13, 2026, and an original required delivery date of July 30, 2027, though the need ship date is January 19, 2027.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
COMPRESSOR, RECIPROC
Solicitation # SPE7M1-26-U-4864
This contract specifies the procurement of a reciprocating compressor identified by part number LF3-10 and NSN 4310-01-552-9871, with a required quantity of 67 units to be delivered within 117 days under FOB origin terms. The item is classified as a commercial item and must strictly comply with the source-controlled drawing NR 59678 11B365012 Revision A dated July 14, 2014, which mandates that only approved sources listed on the drawing may supply the compressor, though additional qualified sources not yet reflected may be considered for future procurements. The compressor must be supplied with a compatible motor, and no ozone-depleting chemicals are permitted in any component. All items must be packaged in accordance with ASTM D3951, but DLA Master List requirements take precedence, with labeling and palletization adhering to MIL-STD-129 and RP001 DLA Packaging Requirements. Inspection and acceptance occur at destination, with zero variance allowed in quantity. The contract incorporates technical and quality requirements from the DLA Master List, including cybersecurity measures under CMMC Level 2, configuration change management per RQ002, and the removal of government identification from non-accepted supplies under RQ011. Covered Defense Information requirements apply per RD002, and any deviations or waivers must be formally requested. The solicitation is a Total Small Business Set-Aside under NAICS code 333912, with a response deadline of August 17, 2026, and is issued by the Department of Defense’s Maritime Supply Chain. The unit price is $67.00 per unit, totaling $4,489, and while the quantity is estimated, no adjustments are permitted. All deliveries must meet exact configuration, packaging, and labeling standards without exception, and offerors seeking future qualification must contact the cognizant design activity specified on the source-controlled drawing.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333912
New
DIBBS
CYLINDER, RECIPROCATING
Solicitation # SPE7M1-26-T-245C
The contract is for one reciprocating compressor cylinder, identified by NSN 4310-12-355-5027 and Sauer Compressors USA part number 061872, and is classified as a restricted source item requiring government engineering source approval due to its critical application. It must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including prohibitions against intentional use of mercury or mercury-containing compounds in any hardware or supply, except for specific exempted uses such as batteries, fluorescent lights, sensors, weapon systems, or approved chemical reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 specifications, with no special marking required, and palletization must follow DLA packaging requirements. The item is to be delivered FOB origin within 144 days of contract award, with a required ship date of January 5, 2027, and delivery address at DLA Distribution Puget Sound in Bremerton, WA. Inspection and acceptance occur at destination, with zero variance permitted in quantity. The contract is issued under solicitation SPE7M1-26-T-245C, with a response deadline of August 13, 2026, and falls under NAICS code 333912 for commercial and industrial machinery and equipment manufacturing, administered by the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
PARTS KIT, COMPRESSOR
Solicitation # SPE7M1-26-T-245J
This contract covers the procurement of a parts kit for a compressor, specifically identified by NSN 4310-01-480-5750 and part number 085 151 manufactured by SAUER COMPRESSORS USA, INC. The item is classified as a critical application item and must comply with strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must ensure that no mercury or mercury-containing compounds are intentionally added or in direct contact with the hardware, except for specific permitted uses such as in batteries, fluorescent lights, instrument sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing items requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging and preservation must adhere to MIL-STD-2073-1E, Appendix D, for kits, with marking in accordance with MIL-STD-129 and palletization following DLA packaging requirements. The unit of issue is KT and three units are required, with no variance allowed in quantity. Delivery is required FOB origin within 158 days of contract award, with a need ship date of January 19, 2027, and an original required delivery date of January 9, 2027. Inspection and acceptance both occur at the destination, and all shipments must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20 for initial and first destination transport. The contract is issued under solicitation SPE7M1-26-T-245J, published on August 2, 2026, with responses due by August 13, 2026, under a North American Industry Classification System code of 333912. The primary point of contact is Michael Reese of the Department of Defense, Maritime Supply Chain, and all deliveries must be labeled and handled in strict compliance with government-prescribed standards to ensure proper receipt and processing.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
BOOT, RED, AIRCRAFT, M
Solicitation # SPE7M1-26-T-244A
This contract, issued under solicitation SPE7M1-26-T-244A, specifies the procurement of one unit of a red aircraft boot with NSN 4310-01-584-3021 and a second line item for twelve units of the same item, with a total value of $12.00. Delivery is required within five days of shipment and must be FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements. Two distinct delivery addresses are provided—one for parcel post and another for freight—each tied to specific government facilities in Jacksonville, Florida and San Diego, California, with detailed shipping instructions including TCN, RDD codes, and project identifiers. The contract prohibits parcel post for shipments and mandates use of traceable transportation methods. Required delivery dates are December 3, 2025 for the Jacksonville shipment and July 30, 2026 for the San Diego shipment, with no need ship date specified. The unit of issue is each, and all data aligns with DoD authorized standards. The contract is governed by technical and quality requirements referenced from the DLA Master List, and primary point of contact is Kelsey Schlagenhaft of the Department of Defense.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
COMPRESSOR UNIT, RECIPR
Solicitation # SPE7M1-26-T-245P
This contract is for the procurement of one reciprocating compressor unit under solicitation SPE7M1-26-T-245P, with a single unit of issue, part number 4310-01-696-4894, and purchase request number 7017696519. The item must conform to technical and quality specifications referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, and must adhere strictly to the configuration control and materials management protocols defined for Edgewood Chemical Biological Center materials. Prohibited from use are any Class I ozone-depleting chemicals, regardless of conflicting specification requirements, and any substitute materials must be submitted for prior approval unless explicitly permitted by the specification. The compressor unit must be preserved, packaged, and packed in full compliance with MIL-STD-2073-1E and Special Packaging Instruction AK16964894 dated July 9, 2024, with marking following MIL-STD-129 and palletization per DLA packaging requirements. No variance in quantity is allowed—exactly one unit is required. Delivery is FOB origin with inspection and acceptance occurring at destination, and the contractor must deliver the unit within 167 days of contract award, with a required ship date of January 28, 2027. The item is to be shipped to the designated receiving warehouse at 25600 S Chrisman Road, Tracy, CA 95304-5000 under DLA freight shipping instructions C19 and C20, and must not be marked with any government identification if non-accepted. Certification of conformance is authorized unless specifically withheld by a quality assurance letter of instruction. The procurement is subject to full and open competition, with no set-aside restrictions, and the contract is governed by FAR provisions and DLA directives applicable at the time of solicitation issuance. Technical documentation references include TDP Revision A, Gen 1, aligned with multiple revision-controlled drawings dated up to July 2024.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
HOUSING, AIR COMPRESSOR
Solicitation # SPE7M1-26-T-245B
This contract pertains to the procurement of housing components for air compressors, identified by NSN 4310015908447 and part number 1G962-2301-2, supplied by Cummins Power Generation Inc. and Kubota Tractor Corp. A total quantity of four units is required, with a unit price of $4.00, resulting in a total contract value of $16.00. The delivery must be completed within 189 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization strictly following DLA’s Packaging Requirements for Procurement. All technical and quality requirements referenced by R or I numbers from the DLA Master List take precedence over any other standard. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by the specification. The contract mandates strict adherence to DLA’s unit of issue and packaging guidelines, with all items packaged in accordance with the specified Unit of Issue and Quantity per Unit Pack. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, and the required ship date is February 19, 2027. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation was issued under SPE7M1-26-T-245B on August 2, 2026, with a response deadline of August 13, 2026, and falls under NAICS code 333912 for industrial machinery manufacturing. Primary point of contact for the contract is Michael Reese of the Department of Defense’s Maritime Supply Chain, reachable via email and phone. All documentation and compliance must align with the DLA’s authorized procurement protocols and technical directives as defined on official government sites.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
CYLINDER, RECIPROCATING
Solicitation # SPE7M1-26-T-244X
The contract is for the procurement of one reciprocating compressor cylinder, identified by NSN 4310-12-355-5026 and part number 064937 from SAUER COMPRESSORS USA, INC. This is a restricted-source item requiring government engineering source approval and is designated as a critical application item. Delivery is required within 144 days FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and unit container codes, with palletization governed by DLA packaging standards. The item must be shipped to the DLA Distribution Depot in Bremerton, Washington, with a required ship date of January 5, 2027, and original delivery date of February 7, 2027. The contract incorporates stringent technical and quality requirements from the DLA Master List, including prohibitions against intentional use of mercury or mercury-containing compounds in the product, except for specific exempted applications such as functional batteries, lighting, sensors, or weapons systems as defined by NAVSEA, with additional containment rules for portable devices. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. All provisions are governed by the version of the DLA Master List in effect at the solicitation issue date. The contracting activity is under the Department of Defense, Maritime Supply Chain, with Michael Reese listed as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
GRILLE, REAR, HOOD
Solicitation # SPE7M1-26-T-219L
The contract is for the procurement of 21 rear hood grilles identified by NSN 4310-01-584-3027 and part number 158-72261 under solicitation SPE7M1-26-T-219L, issued by the Defense Logistics Agency’s Maritime Supply Chain under the Department of Defense. Delivery is required 213 days after award, with an original due date of October 14, 2026, and a need ship date of March 2, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must be delivered FOB origin with zero variance in quantity, inspected and accepted at destination, and packaged in accordance with ASTM D3951, though compliance with the DLA Master List of Technical and Quality Requirements supersedes any conflicting provisions. Packaging must be marked and labeled per MIL-STD-129, including GS1-128 barcoding, and palletized per RP001 DLA Packaging Requirements for Procurement. The contract specifies electronic invoicing via WAWF and mandates adherence to multiple cybersecurity and information safeguarding clauses, including DFARS 252.204-7012 and NIST SP 800-171, requiring implementation of security controls and timely cyber incident reporting. Contractors must also comply with restrictions on the use of covered defense telecommunications equipment, hazardous material labeling per OSHA, and ocean transport via U.S.-flag vessels. The contract is governed under simplified acquisition procedures with a fixed-price structure, and includes clauses addressing subcontracting, payment acceleration for small businesses, unauthorized obligations, warranty defaults, and whistleblower protections. Offerors are required to affirm their small business status, UEI and CAGE codes, and socioeconomic designations through SAM.gov, with representations to be maintained throughout the contract lifecycle. All technical and quality requirements referenced by R or I numbers are incorporated by the DLA Master List, and government identification must be removed from non-accepted supplies. Payment processing and contract administration are managed through designated DoDAACs, with oversight by a designated COR/COTR whose details will be specified in the resulting award.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-220K
The contract is for the procurement of 11 piston rings, identified by NSN 4310-12-332-0605, under solicitation SPE7M1-26-T-220K, which is a total small business set-aside under FAR 19.5 with a NAICS code of 333912. Delivery is required 136 days after award, with FOB destination at the DLA Distribution facility in New Cumberland, Pennsylvania. The product must meet stringent packaging and preservation standards per MIL-STD-2073-1E, Method 31 (Clean/Dry), with no preservation material used; marking must comply with MIL-STD-129, including proper barcoding and no special marking. The packaging code is U, with unit container D3 and intermediate container E6. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds except for designated functional uses in batteries, lighting, sensors, weapon systems, or specific chemical reagents, requiring shock-proof containment with a secondary boundary for portable devices under NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions controlled by the solicitation issuance date. Acceptance is to occur at the destination, with government responsibility for inspection. Payment must be processed via Wide Area Workflow (WAWF), and the contractor is bound by numerous FAR and DFARS clauses addressing cybersecurity (NIST SP 800-171), safeguarding of contractor information systems, hazardous materials labeling per 29 CFR 1910.1200, combating human trafficking, employment eligibility verification, sustainable products, and small business subcontractor payment acceleration. The contract includes deviations for several clauses, including changes, subcontracting for commercial items, and flow-down obligations to subcontractors. The offeror must verify small business status, provide a Unique Entity Identifier and CAGE code, and comply with all applicable representations and certifications, with proposals due electronically via DIBBS by August 5, 2026.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Regulatory Compliance and Documentation SupportThe contract titled Regulatory Compliance and Documentation Support is a subcontract aimed at assisting a prime contractor in meeting federal regulatory requirements related to documentation and compliance. Key responsibilities include managing invoice submissions through the Invoice 2in1 system, preparing and submitting required documentation via the Wide Area WorkFlow system, and ensuring proper Safety Data Sheet submissions for hazardous materials. The work is directly tied to maintaining adherence to Department of Defense procurement and safety protocols, with all tasks centered on accurate, timely, and complete recordkeeping to avoid compliance breaches. Performance of the contract is specifically required to take place in Texarkana, with a ZIP code of 75507-5000, and is classified under the NAICS code 541611, indicating it involves administrative management and general management consulting services related to regulatory processes. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026. The contracting activity falls under the Maritime Supply Chain organization within the Department of Defense, and the subcontract is accessible via the DIBBS platform for qualified offerors seeking to support critical defense logistics compliance functions.
Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Freight Shipping ServicesThe contract entails the logistics and freight shipping services required to transport safety relief valves from the supplier to the Defense Logistics Agency depot in Texarkana, Texas, with a zip code of 75507-5000. All aspects of the shipment, including coordination of freight, preparation of required documentation, and adherence to federal shipping reporting systems, must be fully managed by the contractor to ensure compliance with Department of Defense standards. The work falls under NAICS code 484220, which classifies it as a truck transportation service, and is structured as a subcontract within the Maritime Supply Chain division of the Department of Defense. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with no set-aside designation specified, meaning all eligible entities may compete. The performance location is clearly defined as the DLA depot in Texarkana, and the entire scope requires strict alignment with government logistics protocols for defense-related shipments.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
Supply of Safety Relief ValvesThe contract involves the procurement and delivery of four Safety Relief Valves identified by NSN 4220-01-677-3257 to a Defense Logistics Agency depot located in Texarkana, Texas, with a zip code of 75507-5000. This is a direct material supply requirement with no assembly, installation, or further processing needed by the supplier. The solicitation is classified as a subcontract under the NAICS code 332912, which corresponds to other fabricated metal product manufacturing. The opportunity was posted on August 2, 2026, with a response deadline of August 13, 2026. The contracting organization is the Maritime Supply Chain under the Department of Defense, and delivery must be completed to the specified DLA facility without any additional service obligations beyond supply. The full details and submission instructions are available through the provided DIBBS link.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation for Military Shipment
Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC & NIST SP 800-171)
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling and Labeling Compliance
Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334514
New
DIBBS
Digital Display Indicator (COTS) Supply
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 999999
New
DIBBS
Unable to Decompose Subcontract Opportunities

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
Supply of Hose Clamps (CRES, Passivated Finish, 0.870 IN.ID)
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M1-26-T-245Y
The contract specifies the procurement of a solenoid, electrical component identified by NSN 5945-01-293-2059 and part numbers 654VE7513-1 from Lockheed Martin and H-3289-030 from SAIA-BURGESS INC. A total of fifteen units are required at a unit price of $15.00, with delivery due within 53 days FOB origin. The item is classified as a critical application item, and all supplies must comply with DLA packaging requirements under MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 and IPC/JEDEC J-STD-609, requiring Pb and Pb-free attribute labels on each individual unit package per defined placement guidelines. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, assigning verification levels or AQLs based on attribute criticality, with zero non-conformances required unless otherwise stated. Inspection and acceptance occur at the destination, requiring strict adherence to zero variance in quantity. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of May 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with compliance controlled by the revision in effect at the solicitation or award date. All documentation and procedures must align with DLA’s authorized units of issue and transportation directives.
Relay and Industrial Control Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-244M
The contract pertains to the procurement of three alternating current motors identified by NSN 6105-01-508-7921 under solicitation SPE7M1-26-T-244M, with a required delivery within 144 days of award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware unless specifically exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The alternate offeror is required to submit a complete data package detailing both the primary and alternate parts, as no data is currently available. The contract is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with solicitation issued on August 2, 2026, and responses due by August 13, 2026. Performance is to occur in San Diego, California, and inquiries may be directed to Michael Reese at the provided contact information.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, WAVEGUIDE
Solicitation # SPE7M1-26-T-243Y
The contract pertains to the procurement of two waveguide adapters, identified by NSN 5985-00-752-5826 and part numbers HX-170A and HX292B, under solicitation SPE7M1-26-T-243Y. Delivery is required within five days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. The items are subject to stringent cybersecurity requirements under CMMC Level 2 self-assessment and the handling of covered defense information. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents, with additional containment requirements for portable devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and unspecified attributes are treated as major. The contract mandates adherence to DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers. Shipment is directed to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, via freight forwarder A.J. Worldwide Services Inc., with the original delivery date set for December 2, 2025. The item falls under NAICS code 334220 and is managed by the Department of Defense’s Maritime Supply Chain.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details