Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

CONTROL SET, GASTROINTE

Active
SPE2DS-26-T-236LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The CONTROL SET, GASTROINTESTINAL is a synthetic quality control product designed for in vitro use with the FilmArray Gastrointestinal Panel Assay on the FilmArray instrument, intended to monitor the detection and identification of multiple gastrointestinal pathogens. Each kit contains twelve 200 µL vials suspended in a non-infectious buffer solution containing preservatives and stabilizers, with six tubes each of part numbers M2393718 and M2402818, sufficient for six quality control runs. The product must be stored frozen between -25°C and -15°C and has a non-extendable shelf life of 18 months, classified as a Type I (Code K) item under DLA requirements. It is regulated by the FDA and requires referral through EBS for confirmation prior to procurement. The unit of issue is a kit (KT), and packaging must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, with all containers sealed and protected against damage or breakage. Exterior shipping containers must ensure safe delivery at the lowest rate to the designated destination, with palletization following DLA packaging guidelines. The item is identified by NSN 6550-01-693-5901 and purchase request 7017509828, with a single unit ordered for delivery within 83 days to APO AE 09227-0000, and the required delivery date is July 15, 2026. Bidders must specify the manufacturer, part number, and source, and the contract is governed by DLA procurement standards, including technical and quality requirements from the DLA Master List. The item may involve covered defense information, and all markings and packaging must align with specified federal medical acquisition standards.

General Info

Synthetic QC kit for FilmArray GI Panel, frozen storage, 18-month shelf life, FDA-regulated, DLA procurement, NSN 6550-01-693-5901.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

ATTN CL VIII MED REQ PROCES ACT, APO, AE, 09227-0000, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-236L.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
CONTROL SET,GASTROINTESTINAL
CONTROL SET<(>,<)> GASTROINTESTINAL
THE FILMARRAY GASTROINTESTINAL CONTROL
PANEL CONSISTS OF 12 VIALS SYNTHETIC
NUCLEIC SUSPENDED IN A NON-INFECTIOUS
SOLUTION OF BUFFERS, PRESERVATIVES AND
STABILIZERS; IT IS INTENDED FOR IN VITRO
USE AS A QUALITY CONTROL TO MONITOR THE
DETECTION AND IDENTIFICATION OF MULTIPLE
GASTROINTESTINAL PATHOGENS AS PERFORMED
BY THE FILMARRAY GASTROINTESTINAL PANEL
ASSAY ON THE FILMARRAY INSTRUMENT; EACH
KIT CONTAINS ENOUGH REAGENT FOR 6 QUALITY
CONTROL RUNS; KIT CONTAINS 12 TUBES X 200UL,
6 EACH OF M2393718 AND M2402818.
.
STORED FROZEN (-25 C TO -15 C)
.
UNIT OF ISSUE KIT, KT
.
RS013: Shelf-life requirement RS001 for a TYPE I (CODE K) item with a shelf life of 18 months (non-extendable) applies to this item.
. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. .
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
SPE2DS-26-T-236L
SECTION B
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
MAINE MOLECULAR QUALITY CONTROLS INC 464Z3 P/N M238 DOVE MEDICAL SUPPLY LLC 6YAE8 P/N MMQC-M238
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017509828 0001 KT 1.000
NSN/MATERIAL:6550016935901
DELIVERY (IN DAYS):0083
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
SPE2DS-26-T-236L
SECTION B
PR: 7017509828 PRLI: 0001 CONT’D
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PARCEL POST ADDRESS:
WK4FV1
W0CC USA MED MAT CTR EUR
CMR 469
ATTN CL VIII MED REQ PROCES ACT
APO AE 09227-0000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WK4FV1
W0CC USA MED MAT CTR EUR
USAMMC E DISTR AND TRANS DIVISION
LUDWIGSHAFENERSTRASSE 31 BLDG 2369
KAISERSLAUTERN 67657
DE
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE2DS-26-T-236L NSN/Part Number: 6550-01-693-5901 Quantity: 1 KT Purchase Request: 7017509828QTY: 1 Delivery: 83 days ADO

Similar Contracts

NAICS: 339113
New
DIBBS
TRAY, COUNTING, TABLET AThe contract specifies the procurement of one counting tray designed for tablets and capsules, identified by NSN 6530-01-168-8096 and part number 23087, with a unit of issue of each (EA). The tray must include a mechanical mechanism to separate counted doses and allow excess doses to be poured back into a vial, must be compatible with medication vials, and must come with a spatula. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packing and shipping containers must be commercially suitable, sealed, and capable of protecting contents from damage during transit. The equipment must be packed and palletized per DLA Packaging Requirements (RP001) and ASTM D3951, with all labeling and marking strictly following DLA’s Medical Marking Standard. Delivery is FOB destination within 20 days of contract award, with no quantity variance allowed, and inspection and acceptance occur at the delivery point. Freight must be shipped by the fastest traceable means—parcel post is prohibited—and the delivery address is specified for the USNS APALACHICOLA at the MSC Warehouse in Norfolk, Virginia. The contract is issued under solicitation SPE2DH-26-T-5210 with a response deadline of July 22, 2026, and a required delivery date of July 17, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
LENS, OPHTHALMIC, COMPOUThe contract specifies the procurement of ophthalmic compound lenses under NSN 6540-01-645-8120, with a quantity of six units to be delivered within 20 days to Fort Hood, Texas, under FOB destination terms. The item is classified as a FDA-regulated Class III medical device, requiring compliance with registration, listing, labeling, and Good Manufacturing Practices even if a 510(k) is not mandated. All packaging must conform to commercial standards as outlined in the procurement document, with each unit sealed in protective containers and shipped in commercial exterior containers suitable for safe carrier transport at the lowest cost. Marking requirements strictly follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must be applied in accordance with DLA guidelines accessible online. The product must be shipped via traceable means, excluding parcel post, and requires palletization per DLA packaging requirements. The contracting officer must submit an EBS referral for FDA confirmation, including bidder and manufacturer details. The delivery address, ship-to, and mark-for locations are identical and tied to a specific military installation code, with special handling instructions and a required delivery date of July 16, 2026. The contract uses the DoD unit of issue and references the DLA Master List of Technical and Quality Requirements for compliance with all technical and regulatory conditions.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
LIGHT, DIAGNOSTIC-EXAMIThe contract is for a single diagnostic light unit, identified by NSN 6530-00-480-8286, designed for medical examination purposes to detect foreign objects, abrasions, lacerations, and ulcerations of the eye. The handheld device features a rectangular housing measuring approximately 7 inches by 5.5 inches by 2.5 inches, containing sockets, ballast, and wiring for four lamps—two cool white fluorescent and two ultraviolet—along with on-off switches, a 3-power magnifying lens measuring 4 by 2 inches, and a 6-inch handle. It operates on 115 volts AC at 50/60 Hz and includes a 6-foot, three-conductor power cord with a 16-watt Burton-type three-prong plug. The unit must be packaged commercially as specified, sealed in a container capable of preventing damage or breakage, and shipped in exterior containers suitable for safe delivery via common carrier at the lowest rate to the designated delivery point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement is governed by DLA’s packaging and technical requirements, with compliance to the DLA Master List of Technical and Quality Requirements referenced under RP001 and RA001, and must conform to the applicable revision in effect on the solicitation or award date. The solicitation number is SPE2DS-26-T-236T, issued on July 15, 2026, with responses due by July 21, 2026, under NAICS code 339113. Delivery is required within 20 days of award to an FPO address with ZIP 96666. The contracting office is the Department of Defense, Medical Supply Chain MD Surg FSF, with primary point of contact Olusola Emmanuel reachable via email and phone. Government identification must be removed from non-accepted supplies per RQ011, and all documentation must align with DLA’s current procurement standards for simplified or large acquisitions as applicable.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details