Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DRAINING KIT, FUEL

Active
SPE8EE-26-T-2300Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single unit of a fuel draining kit with NSN/Part Number 4930-01-691-7588, issued under solicitation SPE8EE-26-T-2300 with a response deadline of August 17, 2026, and a delivery requirement of five days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions governed by the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. The item contains technical data subject to export control under either ITAR or EAR, prohibiting any export or disclosure to foreign persons, including those within the United States, without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled data is restricted solely to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed required training on handling export-controlled technical data, and have received official approval from DLA. The solicitation is a federal procurement under NAICS code 333912, with the Department of Defense as the agency, and Philip Ferrara listed as the primary point of contact.

General Info

Fuel draining kit, NSN 4930-01-691-7588, DLA contract, export-controlled, ITAR/EAR, restricted access, 5-day delivery.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

333912 - Air and Gas Compressor ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE8EE-26-T-2300 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Philip Ferrara
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DRAINING KIT,FUEL
DRAINING KIT,FUEL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4930-01-691-7588 Quantity: 1 EA Purchase Request: 7017570560QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333912
New
DIBBS
Manufacturing of Centrifugal Fueling/Defueling Pumping UnitThe contract calls for the manufacture, assembly, testing, and delivery of a centrifugal pumping unit specifically engineered for fueling and defueling operations, adhering to stringent military specifications and Defense Logistics Agency requirements. The unit must meet exact performance, durability, and safety standards to ensure reliable operation in demanding military environments, with all work required to comply with established defense protocols and quality control measures. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the location where final integration, testing, and delivery will occur. This subcontract, released under NAICS code 333912 for other commercial and service machinery manufacturing, was posted on August 5, 2026, with a response deadline of August 17, 2026. The contracting authority is the Department of Defense through its Construction & Equipment Manu & Con organization, and while no specific set-aside status is indicated, the work is intended to support critical logistics infrastructure for military fuel handling operations. All proposals must be submitted through the designated DIBBS portal to be considered, and contractors are expected to demonstrate proven capability in producing high-reliability fluid systems compliant with defense standards.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-26-Q-1335
The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333912
New
DIBBS
SUPPORT ASSY
Solicitation # SPE7M1-26-T-251M
The contract pertains to the procurement of 17 units of a SUPPORT ASSY with NSN 4310-01-509-0164 under solicitation SPE7M1-26-T-251M, which is a Total Small Business Set-Aside as defined by FAR 19.5. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Delivery is required within 74 days after order, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on August 17, 2026, and is issued by the Department of Defense’s Maritime Supply Chain under the NAICS code 333912. The contract imposes strict compliance with DLA packaging standards, configuration change management procedures, and export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requiring adherence to DFARS 252.225-7048. Only contractors with approved U.S./Canada Joint Certification Program credentials, who have completed mandatory DLA export control training and questionnaires, and received DLA authorization may access the controlled data. Additionally, the contractor must be certified under Cybersecurity Maturity Model Certification (CMMC) Level 2 by a C3PAO, and must comply with Covered Defense Information protocols. The primary point of contact is Brandon McNeely, reachable via email and phone, with the solicitation accessible through the DIBBS system.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
LUBRICATING GUN, HANDHE
Solicitation # SPE8EE-26-T-2279
This contract is for the procurement of 17 handheld lubricating guns, identified by NSN 4930-01-714-1512 and part number 4288501 from The Will-Burt Company, under solicitation SPE8EE-26-T-2279 issued by the Defense Logistics Agency Troop Support. Delivery is required within 167 days after award, with an original required delivery date of January 18, 2027, and a need ship date of February 1, 2027. The items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, under the First Destination Transportation program. All supplies must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific packaging parameters such as QUP 001, pres method 10, unit container D3, and intermediate container E5 with pack code U. Palletization must conform to DLA Packaging Requirements for Procurement, and no government identification may be removed from non-accepted supplies. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable fluorescent lamps and instruments requiring shockproof construction and double containment per NAVSEA 5100-003D. The contract incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, along with numerous FAR and DFARS clauses covering quality control, cybersecurity, hazardous materials, trafficking prevention, employment eligibility, sustainable products, and safeguarding covered defense information. Inspection and acceptance occur at the destination point under FAR 52.246-1. Offers must be submitted via DIBBS by August 17, 2026, and are subject to pass/fail gates including exclusion of additive manufacturing unless approved and mandatory submission of Safety Data Sheets prior to award. The government may apply HUBZone price evaluation preferences, and awards may be automated if no first article testing is required. Contractors must validate their SAM representations, comply with WAWF for electronic invoicing, and meet all hazardous material labeling and cybersecurity reporting obligations as specified under applicable clauses including 252.204-7012 and 252.2
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
PUMPING UNIT, CENTRI
Solicitation # SPE8EE-26-T-2268
The contract solicits nine centrifugal pumping units specifically designed for fueling and defueling operations, identified by NSN 4930-41-003-0960, with a delivery requirement of 167 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on the acquisition size, and any amendments overriding earlier versions. Packaging must comply with DLA packaging requirements, and tailored higher-level quality standards apply to both manufacturers and non-manufacturers. The solicitation, numbered SPE8EE-26-T-2268, was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333912 for other commercial and industrial machinery and equipment manufacturing. The award is expected to be managed by the Department of Defense under the Construction & Equipment Manu & Con organization, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Philip Ferrara, reachable via email and phone provided, and all solicitation details are accessible through the DIBBS system.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
RING, PISTON
Solicitation # SPE7M1-26-T-231H
The contract solicitation SPE7M1-26-T-231H seeks the procurement of two piston rings, part number 18-20420-8R1 manufactured by RIX INDUSTRIES, identified by NSN 4310017062926, with a total quantity of two units to be delivered to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591. Delivery is required within 20 days after receipt of order, with FOB destination terms, and the supply must comply with strict packaging and marking standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and RP001 for palletization, with no special marking required. The item must be shipped by the fastest traceable means, strictly prohibiting parcel post, and all deliveries must be accompanied by compliance with hazardous material handling requirements as outlined in 29 CFR 1910.1200, including submission of Safety Data Sheets prior to award. Additive manufacturing is prohibited unless explicitly authorized, and offerors must validate current representations in the System for Award Management, including small business status and compliance with restrictions on covered defense telecommunications equipment. The contract incorporates multiple FAR and DFARS clauses related to cybersecurity, whistleblower rights, trafficking in persons, export control, and domestic sourcing, including the Buy American Act and Berry Amendment, with a reduced threshold of $150,000. Payment processing must occur through the Wide Area Workflow system, and inspection and acceptance occur at the destination, governed by FAR 52.246-2. Offers must be submitted via DIBBS by August 3, 2026, and the solicitation may be awarded automatically if eligible, with preference potentially given to HUBZone concerns. The contract is subject to a zero percent quantity variance, and all items must be fully compliant with the specified technical and logistical requirements to be considered for award.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333912
New
DIBBS
NOZZLE, FUEL AND OIL
Solicitation # SPE8EE-26-T-2296
The contract is for a single unit of a nozzle used for fuel and oil, identified by NSN 4930-01-656-8064, with a delivery requirement of five days after contract award. The solicitation, issued under number SPE8EE-26-T-2296, was posted on August 5, 2026, with responses due by August 17, 2026, and falls under the NAICS code 333912 for construction and equipment manufacturing. Technical and quality requirements referenced in this procurement are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item involves technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and strict adherence to DFARS 252.225-7048 is required. Access to this controlled data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have submitted the DLA Export-Controlled Technical Data Questionnaire. The primary point of contact for inquiries is Philip Ferrara, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
Federal
Air Dryer Parts
Solicitation # N0018926QL319
The U.S. Navy’s NAVSUP Fleet Logistics Center Norfolk is soliciting commercial air dryer parts under solicitation number N0018926QL319, utilizing a Firm Fixed Price structure in accordance with FAR Parts 12 and 13.5 for commercial items. The requirement is for parts to be delivered to 1518 Piersey Street, Building MB-100, Norfolk, Virginia, with a strict delivery timeline of 30 days or less. This combined synopsis and solicitation is exclusively available online via SAM.gov beginning August 5, 2026, and no hard copies will be issued. Vendors must self-certify that neither they nor their principal officials are suspended or debarred from federal contracting and must be actively registered in the System for Award Management (SAM) prior to award, with the exception of foreign vendors performing work outside the U.S. The North American Industry Classification System code is 333912 for Air and Gas Compressor Manufacture, with a small business size standard of 1,000 employees, and the Federal Supply Code is 4440 for Driers, Dehydrators, and Anhydrators. Quotes are due by August 6, 2026, at 4:00 p.m. ET, and all inquiries must be directed to Brittany Simmons at brittany.s.simmons3.civ@us.navy.mil.
Navsup Flt Logistics Ctr Norfolk

POSTED

about 22 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 333912
New
Federal
Purchase Mobile Air Compressors
Solicitation # FA520926Q0072
Funds are not currently available for this solicitation, and no award will be made until such funds are appropriated; the Government retains the right to cancel the solicitation at any time with no obligation to reimburse offerors for costs incurred. The solicitation seeks two units of Mobile SCBA Air Compressors under a firm-fixed-price contract, with delivery required within 180 calendar days of award to the designated destination at APO, AP 96328, United States, and additional performance activities at Yokota Air Base in Fussa, Tokyo, Japan. The procurement is classified under NAICS code 333912 and follows FAR Part 12 procedures for commercial items, with evaluation based on a lowest price technically acceptable (LPTA) methodology, where technical compliance serves as a pass/fail threshold and price determines selection among qualified offers. All items must comply with MIL-STD-130 for unique item identification using 2D Data Matrix barcodes per ISO/IEC 16022, and MIL-STD-129 for shipment and container labeling, with all documentation submitted through WAWF for inspection, acceptance, and payment. The contract incorporates numerous FAR and DFARS clauses covering procurement integrity, cybersecurity, whistleblower protections, contractor identification, anti-terrorism training, and safeguarding defense information, with specific deviation 2026-00038 applied to several clauses. Contractors located in Japan must navigate tax exemptions under the U.S.-Japan Status of Forces Agreement and may invoke conciliation through the U.S.-Japan Joint Committee if a dispute arises after a final contracting officer decision. Proposals must be submitted electronically by email to the designated points of contact in Microsoft Word, Excel, or PDF format, with no zip files permitted, and must include completed SF 1449, SAM.gov certifications, Unique Entity ID, CAGE code, and all required representations. Despite the inclusion of multiple accounting codes and administrative contacts, no contract value is stated due to the absence of pricing data and available funds. The solicitation explicitly excludes any set-aside designation and does not designate a contracting officer’s representative or technical representative, with invoicing and payment managed solely through WAWF by the administrative point of contact, TSgt Jordan Cui.
FA5209 374 Cons Pk

POSTED

about 22 hours ago

DEADLINE

in 21 days
View Details
NAICS: 333912
New
DIBBS
VALVE, FREE AIR UNLO
Solicitation # SPE7M0-26-T-031C
The contract is for the procurement of two free air unloader valves under NSN 4310-01-275-0598, with a required delivery within five days of award, delivered FOB origin. The item is classified as a critical application component, and only two approved suppliers—Ingersoll-Rand Company DBA 51436 with part number 30386478 and Siemens Energy, Inc. with part number 42108597—are qualified. Strict compliance with DLA packaging requirements and MIL-STD-2073-1E is mandated, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special markings required. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and directed to the Military Sealift Command in San Diego, California. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in specified items like batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA, with portable devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The contract enforces a zero variance in quantity and requires inspection and acceptance at destination, with the original required delivery date set for January 28, 2025. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M0-26-T-031C, with a primary point of contact at the Defense Logistics Agency and a NAICS code of 333912 for industrial machinery manufacturing.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
FILTER, FLUID
Solicitation # SPE8EE-26-T-2215
The contract is for the procurement of one fluid filter with NSN 4930-01-724-0727 under solicitation SPE8EE-26-T-2215, requiring delivery within 20 days FOB origin with no quantity variance allowed. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede general standards such as ASTM D3951. Packaging must conform to MIL-STD-129 labeling and DLA Packaging Requirements RP001, including palletization standards, and the Unit of Issue is one each. The item must be shipped via traceable freight methods, not parcel post, to the designated military delivery point in Bridgeport, California, with freight shipping instructions specifying the building, address, and contact details. The Required Delivery Date is July 31, 2026, and the contract mandates full compliance with documentation criteria for source approval, removal of government identification from non-accepted supplies, and adherence to all specified DLA directives. Government-specific tracking codes, projected information, and points of contact including Philip Ferrara are provided for institutional use and procurement oversight.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
FILTER-REGULATOR, AI
Solicitation # SPE7M2-26-T-5989
The contract specifies the procurement of five Filter-Regulator, AI units under NSN 4930-01-561-7701, with a unit price of $5.00 and a total value of $25.00, awarded under solicitation SPE7M2-26-T-5989. Delivery is required within 154 days from the contract award date, with FOB origin shipping terms, and inspection and acceptance points set at the destination. Packaging must conform to MIL-STD-2073-1E, with specific preservation methods, wrap materials, and unit container codes, and marking must follow MIL-STD-129 without special markings. Palletization adheres to DLA packaging requirements, and the delivery address is the DLA Distribution facility in New Cumberland, PA. The item is subject to strict prohibition against intentional addition of mercury or mercury-containing compounds, except for functional uses in specified equipment like batteries, fluorescent lamps, instruments, and naval-referenced chemical reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The required ship date is January 19, 2027, with the original delivery deadline set for April 1, 2027, and all transportation logistics follow DLA procedural notes C19 and C20.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 332999
New
DIBBS
Supply of Bridge Cabin RollersThe contract calls for the supply and delivery of three Bridge Cabin Rollers, specialized components designed for integration into bridge or heavy equipment systems under CLIN 0001. This subcontract is issued as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses, and falls under the NAICS code 332999 for other fabricated metal product manufacturing. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the equipment must be delivered and installed. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, providing a twelve-day window for submissions. The contract is managed by the Department of Defense under the Construction & Equipment Manu & Con division, with all activity coordinated through the DIBBS procurement portal.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488410
New
DIBBS
Domestic and International Shipping Logistics (U.S.-Flag Vessel Compliance)This contract requires the domestic and international shipment of finished jacks with strict adherence to U.S.-flag vessel requirements for all ocean transport portions, ensuring compliance with federal maritime regulations. The work involves end-to-end logistics coordination, including handling, routing, and documentation for shipments originating from or destined to the place of performance in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The obligation extends to managing both domestic transit and international ocean crossings while maintaining full compliance with U.S. flag vessel mandates, which may include restrictions on foreign-flag carriers and specific documentation protocols. The solicitation is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, aligning with FAR 19.5 guidelines. The NAICS code 488410 indicates the scope centers on freight transportation arrangement services, specifically logistics coordination rather than direct asset ownership. The opportunity was posted on August 5, 2026, with responses due by August 17, 2026. The contracting activity stems from the Department of Defense under the organization name Construction & Equipment Manu & Con, and interested parties must access the official solicitation through the provided DIBBS portal to submit proposals.
Motor Vehicle Towing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires the identification, classification, and thorough documentation of all hazardous components associated with the jack, including but not limited to hydraulic fluid and surface coatings, ensuring full compliance with occupational safety standards. The successful contractor must prepare and submit accurate Safety Data Sheets (SDS) in accordance with OSHA’s 29 CFR 1910.1200 regulations, providing complete and up-to-date information on chemical hazards, handling precautions, and emergency response procedures. This work is critical to maintaining workplace safety and regulatory adherence throughout the product lifecycle. This subcontract is a Total Small Business Set-Aside under the SBA program with a NAICS code of 541690, indicating it is reserved exclusively for small businesses. It was posted on August 5, 2026, with proposals due by August 17, 2026, and the performance location is established in New Cumberland, PA, with a ZIP code of 17070-5002. The contracting agency is the Department of Defense under the organization title CONSTRUCTION & EQUIPMENT MANU & CON, and the solicitation is administered through the DIBBS platform. All work must be completed in alignment with federal safety mandates and delivered to meet the specified regulatory and administrative requirements without exception.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and MarkingThe contract requires the packaging, labeling, and barcoding of hydraulic jacks in strict compliance with Department of Defense and Military Standards, including adherence to hazardous materials regulations where applicable. All work must ensure full traceability, durability, and uniformity of markings to meet military logistics and inventory requirements, with special attention to barcoding systems that align with DLA’s specifications for field deployment and supply chain management. The performance location is specified as New Cumberland, Pennsylvania, with zip code 17070-5002, indicating the physical site where the packaging and marking activities must be conducted. This is a subcontract designated as a Total Small Business Set-Aside under the SBA program, meaning only small businesses can compete, as defined by the North American Industry Classification System code 561910, which covers support activities for waste management and remediation services, indicating a classification that may encompass specialized logistics or packaging services. The solicitation was posted on August 5, 2026, with a required response deadline of August 17, 2026, and it is hosted on the DIBBS platform. The contracting agency is listed as the Department of Defense under the organization Construction & Equipment Manu & Con, reflecting the military’s intent to secure compliant packaging services for essential equipment.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Hydraulic Jack ManufacturingThe contract calls for the manufacture of 22 precision hydraulic axle dolly jacks in accordance with technical drawing Part No. 65C33612, encompassing all phases of production including machining, assembly, and rigorous testing to comply with military specifications. The work must be executed to ensure reliability and performance under demanding operational conditions, with full adherence to quality standards required by the Department of Defense. All units are to be delivered to the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002. This is a total small business set-aside under the SBA program, restricted exclusively to small business concerns as defined by the FAR, and falls under NAICS code 332999 for other fabricated metal product manufacturing. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is structured as a subcontract pursuant to the Department of Defense’s Construction & Equipment Manu & Con office. Participation requires full compliance with federal procurement requirements and the capability to meet stringent military performance benchmarks.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Fairlead Roller (NSN 3950-01-659-3754)The contract entails the supply and delivery of three Fairlead Rollers identified by National Stock Number 3950-01-659-3754, mechanical components designed for guiding cables or ropes in military maritime or heavy equipment systems. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, in accordance with FAR 19.5. The North American Industry Classification System code 332999 indicates the work falls under Other Miscellaneous Fabrication. Performance of the contract is mandated to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, providing a twelve-day window for interested parties to submit proposals. The contract is managed by the Department of Defense under the organizational designation Construction & Equipment Manu & Con, and all submissions must be made through the DIBBS platform via the provided link.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation Services
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331222
New
DIBBS
Raw Material Supply (Specialty Metal Forging Stock)
Steel Wire Drawing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332111
New
DIBBS
Forging Manufacturing and Machining
Iron and Steel Forging

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171) and CUI SafeguardingThe contract requires strict implementation of NIST Special Publication 800-171 security controls to protect covered defense information and ensure compliance with the Department of Defense’s requirements for safeguarding controlled unclassified information. All applicable security measures must be fully integrated into the contractor’s systems and operational practices to mitigate risks and prevent unauthorized access, disclosure, or compromise of sensitive data. The contractor is obligated to maintain continuous compliance with these controls throughout the performance period and must have documented procedures in place for monitoring, assessing, and reporting on security posture. In addition to safeguarding CUI, the contract mandates adherence to DFARS 252.204-7012 for cyber incident reporting, requiring immediate notification and detailed documentation of any cybersecurity incidents affecting covered defense information or the contractor’s systems. The incident response protocol must align with DOD standards and include swift containment, investigation, and reporting to the appropriate government authorities. Performance is tied to the location in Barstow, California, and the work falls under NAICS code 541512, indicating it involves computer systems design and related services. The solicitation closed on August 17, 2026, and the contract is structured as a subcontract under the Department of Defense’s procurement framework.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract titled Hazardous Materials Compliance and SDS Management requires the identification of hazardous components within materials and systems used in defense-related construction and equipment manufacturing, with full adherence to OSHA’s Hazard Communication Standard for the preparation of accurate Safety Data Sheets. It mandates strict compliance with both DFARS and FAR regulations governing hazardous materials, ensuring that all documentation, handling, storage, and disposal practices meet federal defense standards. The work is to be performed at a designated location in Barstow, California, with a response deadline of August 17, 2026, and is structured as a subcontract under NAICS code 541620, indicating specialized environmental and technical services for the Department of Defense. All activities must be completed with precision to support operational safety and regulatory accountability across the defense supply chain.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, labeling, and palletization services for cable reels in strict compliance with DLA, MIL-STD-129, ASTM D3951, and DLA RP001 standards, ensuring all materials meet military-grade specification for handling, storage, and transportation. The work must be performed with precision to meet regulatory requirements for unit identification, barcoding, labeling, pallet configuration, and secure containment to prevent damage during transit and long-term storage. The solicitation, issued under NAICS code 561910 for other support services, is structured as a subcontract with a response deadline of August 17, 2026, and a posting date of August 5, 2026. Performance is designated to occur at Barstow, California, with a ZIP code of 92311-5014, and is managed under the Department of Defense’s Construction & Equipment Manufacture and Construction organization. All work must adhere to the technical and procedural mandates of the referenced standards without deviation, and timely submission of bids is critical to participate in this procurement opportunity.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details