Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Component Supply – Plug/Connector (NSN 5935014671395)

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of four units of a specific electrical plug/connector identified by NSN 5935014671395, with strict adherence to military specifications, hazardous materials regulations, and Controlled Unclassified Information safeguarding requirements. The components must meet all applicable MIL-SPEC standards to ensure operational reliability and compatibility within defense systems, while also complying with environmental and safety protocols governing the handling and transportation of regulated substances. Additionally, the contractor is required to implement appropriate controls to protect CUI throughout the manufacturing, packaging, and delivery lifecycle. The solicitation was posted on August 2, 2026, with a response deadline set for August 13, 2026, and is classified as a subcontract under NAICS code 334332, indicating involvement in electronic component manufacturing. Performance is designated for New Cumberland, Pennsylvania, area with zip code 17070-5002, and the contracting entity is the Active Devices Division within the Department of Defense. Although no point of contact or set-aside designation is provided, interested parties must submit proposals through the DIBBS portal via the specified UI link before the deadline to be considered for award.

General Info

Supply four NSN 5935014671395 military-spec plugs, comply with CUI and hazardous materials rules, deliver to New Cumberland, PA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334332View NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 4 units of a specified electrical plug/connector requiring compliance with MIL-SPEC, hazardous materials regulations, and CUI safeguarding.

Similar Contracts

Same NAICS industry code

Qualified Military-Grade Electrical Connector ManufacturingThe contract entails the manufacture of the M83723/71W18146 electrical connector assembly to meet the stringent specifications of MIL-DTL-83723H and the Qualified Products List requirements under FSC 5935, ensuring full compliance with military-grade standards. The scope includes all phases from initial prototyping through rigorous testing and final lot production, demanding precision engineering and adherence to defense-grade quality controls. The work must be performed at the specified place of performance in Tobyhanna, Pennsylvania, with a zip code of 18466-5050, and all deliverables must be certified as compliant with the referenced military specification and qualification list. This is a subcontract opportunity under the NAICS code 334332, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys unit, with a posted date of August 2, 2026, and a response deadline of August 13, 2026. While no set-aside designation is specified, the requirement is targeted toward qualified suppliers capable of producing high-reliability electrical connectors for critical defense applications. The offering is accessible via the DIBBS platform, and successful bidders must demonstrate proven capability in manufacturing military-spec connectors, quality assurance processes, and the capacity to support production timelines consistent with DoD procurement standards.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Rotary Switch Supply and DeliveryThe contract seeks the procurement and delivery of a single rotary switch compliant with the National Stock Number 5930-01-199-6981 for installation on a naval vessel. The supplier must ensure full supply chain traceability from raw materials to final assembly and deliver the unit in full compliance with military packaging standards to meet stringent defense logistics requirements. This is a subcontract opportunity under the NAICS code 334332, which pertains to other electrical equipment and component manufacturing, and is administered by the Electrical Devices Division of the Department of Defense. Responses are due by August 15, 2026, and the solicitation was posted on August 2, 2026, with no set-aside designation indicated. The delivery location is a naval vessel, though the specific port or base is not detailed in the provided data. All submissions must align with defense-grade specifications, including documentation, labeling, and handling protocols to maintain certification and readiness standards.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Custom Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of a specialized electrical cable assembly designed to meet stringent military standards, encompassing full lifecycle execution from design validation through material sourcing, assembly, testing, and packaging. Every phase must adhere to zero-defect quality requirements with complete traceability of all components and processes to ensure operational reliability and compliance. The work requires rigorous documentation and controls to satisfy military-grade specifications, with all deliverables subject to inspection and acceptance under defined quality assurance protocols. Performance is to be carried out at NEW CUMBERLAND, PA, 17070-5002, with the Department of Defense's ASC COMMODITIES DIVISION serving as the contracting entity under NAICS code 334332. The opportunity is structured as a subcontract and was posted on August 2, 2026, with proposals due by August 10, 2026. All submissions must demonstrate the capability to meet exacting military standards and maintain end-to-end material and process traceability, with no tolerance for defects or deviations from the specified technical requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Connector & Component SupplyThe contract calls for the supply of high-reliability electronic components specifically engineered for military-grade cable assemblies, with a key requirement being the provision of MINIBEND LR-41.00 connectors. These components must meet stringent performance and durability standards to ensure operational integrity in demanding defense environments. The solicitation is issued as a subcontract under NAICS code 334332, indicating a focus on navigational, measuring, electromedical, and control instrument manufacturing, and is managed by the ASC COMMODITIES DIVISION within the Department of Defense. Performance of all work is designated to occur in Newport, Rhode Island, with a delivery window closing on August 10, 2026. While no set-aside provisions are specified, the urgency and technical precision required imply that only qualified suppliers with established experience in defense electronics and proven quality control systems are likely to be considered. The contract is accessible via the DIBBS platform, and potential bidders must ensure full compliance with military specifications for connector reliability, environmental resilience, and integration compatibility within larger assembly systems.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Critical Application Item Manufacturing (P/N 121302LT)The contract pertains to the manufacture and delivery of a high-reliability critical application item with part number 121302LT, produced by ELECRO SWITCH CORP., under stringent requirements for enhanced traceability, rigorous quality control, and comprehensive anti-counterfeit protections. The item is intended for use in mission-critical environments where failure is not an option, necessitating adherence to exacting technical and procedural standards throughout the production lifecycle. All manufacturing processes must ensure full material and component溯源, with documented verification at each stage to guarantee authenticity and performance integrity. Subcontracting is the designated contract type, with the North American Industry Classification System code 334332 indicating the focus on electronic component manufacturing. The solicitation was posted by the Electrical Devices Division of the Department of Defense, with a response deadline of August 15, 2026, and all work is expected to support defense-critical systems. Although specific performance location and point of contact details are not provided, the requirement emphasizes secure, auditable production practices and full compliance with federal standards for high-reliability electronics used in defense applications.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Rotary Switch Supply (NSN 5930-01-728-0481)The contract requires the supply of five units of a rotary switch identified by NSN 5930-01-728-0481, with strict compliance to the DLA Master List RA001 specifications. The product must meet all technical, packaging, marking, and environmental requirements as defined by military standards to ensure compatibility and durability under operational conditions. The items are intended for use by the Department of Defense through the Electrical Devices Division, with performance obligations tied to federal acquisition and defense logistics protocols. The solicitation, posted on August 2, 2026, has a response deadline of August 15, 2026, and is categorized as a subcontract under NAICS code 334332, indicating the focus is on other electronic component manufacturing. The contract does not specify a set-aside type or set-aside description, suggesting it is open to general competition. All deliverables must adhere to the designated DLA processes and will be executed under the reference number SPE7M826Q0207, with no specific place of performance or point of contact indicated in the provided data.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Small Business Subcontracting Participation (Opportunity for DBE/MBE/WBE)This opportunity is designed to facilitate participation by certified small businesses, including 8(a), HUBZone, WOSB, and SDVOSB entities, in supply, packaging, and quality assurance roles under a prime contractor’s FAR 52.219-9 subcontracting plan. The solicitation targets organizations eligible for small business set-asides and aims to integrate them into the supply chain for defense-related activities managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The North American Industry Classification System code 334332 indicates the focus is on electronic component and board manufacturing, suggesting subcontracting needs related to production, testing, and logistics support within this sector. The deadline for responses is August 31, 2026, with the opportunity posted on July 31, 2026, allowing prospective bidders a one-month window to prepare and submit their proposals. While no specific place of performance or point of contact is listed, the contract is accessible through the DIBBS portal, and participation is contingent upon meeting certified small business status and aligning with the prime contractor’s subcontracting goals. There is no mention of a monetary value or specific contract duration, but the structure implies a framework for ongoing or long-term subcontracting engagement rather than a single project. Certified firms are encouraged to engage through the provided link to secure a role in this defense supply chain initiative.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Connector and Receptacle SupplyThe contract calls for the supply of high-reliability, MIL-SPEC compliant electrical connectors and receptacles equipped with protective caps, intended for integration into control cable assemblies. All components must be certified as free from counterfeit parts and must adhere strictly to military specification standards to ensure performance under demanding operational conditions. The products are critical to defense systems requiring robust electrical connectivity and must be manufactured with traceable materials and processes to maintain integrity throughout the supply chain. This is a subcontract opportunity issued under NAICS code 334332 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The requirement emphasizes compliance with defense-grade quality controls and demands rigorous documentation to verify conformance to specifications. While the place of performance and point of contact details are unspecified, the procurement is managed through the DIBBS system, indicating formal defense procurement protocols are in effect. Suppliers must demonstrate proven capability in producing MIL-SPEC components and maintaining strict anti-counterfeit measures to qualify.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Electrical Connectors (Receptacle)The contract calls for the supply and delivery of two military-spec electrical connector receptacles, identified by NSN 5935012841450, manufactured to meet the stringent requirements of MIL-DTL-55330, MIL-STD-129, and MIL-STD-1916 standards. These connectors are essential components for defense-grade electrical systems and must comply with all applicable military specifications for performance, durability, and documentation. Delivery is to be made FOB Origin, meaning the buyer assumes responsibility for transportation and risk once the items leave the supplier’s facility, and government inspection will occur at the destination to verify conformance before acceptance. The solicitation is classified as a subcontract under NAICS code 334332, indicating it pertains to other communications equipment manufacturing, and is issued by the Department of Defense through the Maritime Supply Chain ESOC Buys organization. The place of performance is designated as Tracy, California, with a ZIP code of 95304-5000, though no specific point of contact is provided. The posting date is July 30, 2026, and responses are due by August 10, 2026. The contract is accessible via the DIBBS platform, and participants must ensure full adherence to the technical, logistical, and compliance requirements outlined in the referenced military standards.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract requires the manufacture of 62 units of a military-spec electrical cable assembly identified by NSN 5995012014129, with strict adherence to technical drawing NR 80063 SC-C-730001. All units must meet applicable international traffic in arms regulations and export administration regulations, and are subject to origin inspection to ensure compliance with sourcing and authenticity requirements. The work is classified as a subcontract under NAICS code 334332 and is being procured by the ASC Commodities Division under the Department of Defense. Performance is designated for New Cumberland, Pennsylvania, with the zip code 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026. The contract is not subject to any set-aside provisions and is managed through the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Qualified Electrical Connector Supply (QPL-Compliant)The contract calls for the supply of two units of a military-spec electrical receptacle connector identified by NSN 5935013321080, sourced exclusively from the Qualified Products List to ensure compliance with defense standards. The requirement adheres to procurement note H01 and explicitly excludes any lots bearing prohibited date codes, reinforcing stringent quality and traceability controls. This subcontract is issued under NAICS code 334332, indicating a focus on other electrical equipment and component manufacturing, and falls under the Department of Defense’s Maritime Supply Chain ESOC Buys organization, reflecting its alignment with naval and maritime systems procurement. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, providing a twelve-day window for qualified vendors to submit proposals. While no set-aside type is specified, the contract is structured as a subcontract within the broader defense supply chain, likely targeting experienced suppliers with verified QPL status. The official posting and procurement details are accessible via the DIBBS platform, and performance is expected to meet the rigorous technical and regulatory demands of military-grade electrical connectors used in critical defense applications.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly SupplyA single unit of a Special Purpose Electrical Cable Assembly, identified by NSN 6150-01-513-6196, is being procured under a subcontract issued by the ASC Commodities Division of the Department of Defense. The assembly must meet rigorous defense and quality standards and include complete documentation required for submission through the Wide Area Workflow system. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and the item is to be delivered to Dyess Air Force Base, Texas, with a zip code of 79607-1510. The NAICS code 334332 identifies the industry classification for this procurement, indicating it falls under wiring device manufacturing. All deliverables must be fully compliant with federal defense specifications, and successful submission requires adherence to all technical, procedural, and administrative requirements outlined in the solicitation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

RELAY, SOLID STATE

Solicitation # SPE7M5-26-T-365H

The contract is for the procurement of 10 solid state relays with NSN 5945-01-603-8822 under solicitation SPE7M5-26-T-365H, with a required delivery date of July 30, 2026, and a 20-day delivery window FOB destination. The unit price is $10.00 per item with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit container codes, and all marking must adhere to MIL-STD-129 with the special marking code ZZ. Each individual unit package must include lead-free or lead-containing component markings per IPC/JEDEC J-STD-609, paragraphs 5.3.1 and 5.3.2, with placement dictated by paragraph 6.2 of the standard. The delivery address is FPO AP 96663, with shipment governed by DLA procedures C19 and C20. Technical and quality requirements are referenced from the DLA Master List, and all packaging and labeling must satisfy DLA’s packaging requirements. The contracting activity is under the Department of Defense’s Active Devices Division, with Jeanette Heisey as the primary point of contact.

Relay and Industrial Control Manufacturing

POSTED

about 11 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M5-26-T-365G

The contract pertains to the procurement of electrical connectors, specifically identified as RECEPTACLE types with part numbers 5M1776-2041P, 91-554022-41, and 91-554022-41P, all aligned with the NSN 5935011612967. Two units are required under Purchase Request 7017724623, with delivery mandated within 20 days FOB origin at an unchanged quantity—no variances allowed. The items are classified as critical application components for The Boeing Company and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. Preservation and packaging must adhere to MIL-DTL-55330 for connectors and MIL-STD-2073-1E for general packaging, with marking compliant to MIL-STD-129 and no special markings required. The delivery destination is the Government of Israel, Ministry of Defense, with freight handled by G&B Packing Company in Jersey City, NJ. The contract is issued under solicitation SPE7M5-26-T-365G with a required delivery date of August 6, 2026, and is subject to all applicable DLA, DoD, and federal supply directives governing hazardous materials, government identification removal, and unit of issue conversions.

Electronic Connector Manufacturing

POSTED

about 11 hours ago

DEADLINE

STRIP, ELECTRICAL GROUN

Solicitation # SPE7M5-26-Q-0822

The contract is for a single unit of a STRIP, ELECTRICAL GROUND with NSN 5999-01-738-6818, issued under solicitation SPE7M5-26-Q-0822 by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after delivery order, with responses due by August 17, 2026. The solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access the controlled data. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, physical identification of bare items, and application of covered defense information protocols. The point of contact is Andrew Bracken, with performance occurring at FPO, ZIP 34091.

Other Electronic Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

RELAY, SOLID STATE

Solicitation # SPE7M5-26-T-365S

The contract is for the procurement of two solid state relays with NSN 5945-01-129-4673 and part number E3-25A0A from ALLIED CONTROLS, INC., issued under solicitation SPE7M5-26-T-365S by the Department of Defense’s Active Devices Division. Delivery is required within 20 days of contract award, with shipment to be made FOB origin to the Naval Undersea Warfare Center Division Keyport in Keyport, WA, using traceable freight methods exclusively—parcel post is prohibited. The unit of issue is each, with a fixed quantity of two units and no variance allowed. The item is classified as a critical application component, and all packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and marking per MIL-STD-129 with the special marking code ZZ. The contractor must also apply lead finish标识 in accordance with IPC/JEDEC J-STD-609 to each individual unit package, following exact placement guidelines from the standard. The required delivery date is May 28, 2026, with inspection and acceptance occurring at destination. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation or award date. Payment terms and pricing are detailed under CLIN 0001 with a total price of $2.00 per unit. The contract includes specific government-use identifiers and contact details for Jeanette Heisey at DLA.

Relay and Industrial Control Manufacturing

POSTED

about 11 hours ago

DEADLINE

CONNECTOR, PLUG, ELEC

Solicitation # SPE7M5-26-T-365P

The contract specifies the procurement of a plug electrical connector identified by NSN 5935012201934 and part number MS3456W16-7P, following technical and quality requirements from the DLA Master List of Technical and Quality Requirements, particularly referencing SAE-AS34561 Revision A and SAE AS50151 Revision E. The item is classified as a Qualified Product List (QPL) item under Federal Stock Class 5935, requiring compliance with specific qualification standards outlined in Procurement Note H01. It is designated as a critical application item, mandating physical identification and bare item marking per TDP Rev A Gen 1 specifications. The unit of issue is each (EA), with a required quantity of five units delivered FOB origin within 52 days, with a need ship date of October 6, 2026, and original delivery deadline of October 23, 2026. Packaging must adhere to DLA Packaging Requirements and MIL-STD-129 for marking and labeling, with commercial packaging under ASTM D3951 unless hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All DLA Master List requirements override commercial standards. Delivery is to the DLA Distribution Depot in Tinker AFB, Oklahoma, with inspection and acceptance occurring at destination. The purchase request number is 7016267945, with a unit price of $5.00 and total price of $25.00, and no variance allowed in quantity. The contract is issued under solicitation SPE7M5-26-T-365P, with primary point of contact Tate Shannon at the Department of Defense’s Active Devices Division.

Electronic Connector Manufacturing

POSTED

about 11 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M5-26-T-365U

The contract pertains to the procurement of an electrical connector receptacle, specifically identified by part number TV01RW25-20S manufactured by AMPHENOL CORP and referenced through NSN 5935-01-664-5750, with a quantity of ten units required. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is classified as a critical application item and is subject to strict prohibitions against the use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing unless explicit written approval is obtained from the contracting officer. This restriction does not apply to commercial items as defined by FAR 11.001 or to part-numbered-only items. Any substitution or administrative part number change must be supported by documentation from the approved manufacturer and is subject to prior approval before contract award. The item must be packaged in full compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required and palletization adhering to DLA packaging standards. Delivery is FOB origin within twenty days of contract award, with no variance allowed in quantity. Inspection and acceptance both occur at the origin. The shipment is destined for the Government of Israel, Ministry of Defense, with specific freight forwarding instructions and handling codes provided. The contract is issued under Solicitation SPE7M5-26-T-365U, with a response deadline in August 2026 and an original required delivery date of August 4, 2026. The unit of issue is each, and all provisions reflect DLA and DoD acquisition protocols, including restrictions on substance use, strict packaging and marking compliance, and mandatory manufacturer authorization for any product substitution.

Electronic Connector Manufacturing

POSTED

about 11 hours ago

DEADLINE

DUMMY CONNECTOR, PLU

Solicitation # SPE7M5-26-T-365Q

This contract specifies the procurement of two dummy connectors, plug model 44106-61S1-J82 with NSN 5935016969379, under solicitation SPE7M5-26-T-365Q. The requirement is for delivery within 20 days to DULLES VA, with FOB origin terms and no variance permitted in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, wrap materials, and container codes, and must be marked in accordance with MIL-STD-129 with no special marking required. Packaging and palletization must adhere to DLA’s RP001 requirements. The delivery is to be made to the German Armed Forces Command USA-CAN at Dulles International Airport, with the freight forwarder identified as DGY002. The item falls under NAICS code 334417 and is procured by the Department of Defense’s Active Devices Division. All technical and quality specifications referenced via R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation issue date. The contract includes detailed administrative and logistics codes for government use, including destination, project code, and shipping instructions, and requires delivery no later than August 6, 2026, with a response deadline for proposals on August 14, 2026.

Electronic Connector Manufacturing

POSTED

about 11 hours ago

DEADLINE

HEADSET, ELECTRICAL

Solicitation # SPE7M5-26-T-365R

The contract is for the procurement of 413 units of an electrical headset with NSN 5965-01-682-1143 under purchase request 7017696600, with a delivery requirement of 105 days after contract award. The solicitation number is SPE7M5-26-T-365R, issued on August 3, 2026, with responses due by August 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The item falls under NAICS code 334310 and is being procured by the Department of Defense’s Active Devices Division with performance located in New Cumberland, Pennsylvania, zip 17070-5002. Primary point of contact is Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245. Government identification must be removed from any non-accepted supplies, and no additional data is currently available for this requirement.

Audio and Video Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

MICROCIRCUIT, DIGITA

Solicitation # SPE7M5-26-T-365K

This contract pertains to the procurement of a digital microcircuit identified by NSN 5962-01-703-1900 and part number AD8310ARMZ from Analog Devices, Inc., with a quantity of 60 units required under solicitation SPE7M5-26-T-365K. The item falls under Federal Supply Class 5962 for Electronic Microcircuits and is designated as a critical application item, subject to strict traceability, quality, and packaging controls. All supplies must originate from qualified sources listed in the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, with compliance to procurement note M01 ensuring authenticity and legitimacy throughout the supply chain. Contractors are mandated to maintain and submit comprehensive supply chain traceability documentation in accordance with DLA Procurement Note C03, including the completed DLA Land and Maritime Form 918, which must be emailed to the designated government address at least 15 days before delivery and approved prior to shipment. Shipment cannot proceed without written authorization, and failure to meet documentation requirements will render payment non-final. The microcircuit must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including ESD and EMI protective measures per MIL-PRF-81705 specifications, utilizing only certified barrier materials sourced from qualified manufacturers on the QPL-81705. Each unit package must bear appropriate lead finish markings in compliance with IPC/JEDEC J-STD-609, and packaging must include adequate cushioning to prevent physical damage to leads and terminals. Special ESD marking code 39 is required to denote the component’s sensitivity, and preservation methods must follow the prescribed codes for drying, wrapping, and containment. The delivery is FOB origin with a 226-day lead time, and the item is to be delivered to the DLA Distribution center in Columbus, Ohio, with no tolerance for surplus product. All compliance documentation, including test reports and traceability records, must be submitted via email in compressed format under a specified naming convention, with individual file sizes not exceeding 15 megabytes. Payment is contingent upon full adherence to all technical, quality, and packaging directives issued by DLA.

Semiconductor and Related Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

RESISTOR, FIXED, FILM

Solicitation # SPE7M5-26-T-365J

This contract specifies the procurement of 12 fixed film resistors with part number RK73H2ALTD2212F and NSN 5905-01-655-0207 under solicitation SPE7M5-26-T-365J. The item must strictly comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must conform to MIL-STD-2073-1E and DLA packaging standards, including specific preservative methods, wrapping materials, and unit container codes. Marking is to follow MIL-STD-129 with no special markings required, and palletization must adhere to DLA packaging guidelines. Delivery is due within 20 days of contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the point of origin, and the shipment destination is the Army Aviation Depot in Tainan City, Taiwan, with designated point of contact and freight details provided. The requested delivery date is August 4, 2026, and the contract is governed by DLA procedures for freight forwarding and transportation.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 11 hours ago

DEADLINE

DISPLAY, OPTOELECTRO

Solicitation # SPE7M5-26-T-365T

This contract, issued under solicitation SPE7M5-26-T-365T, is a total small business set-aside for the procurement of a display and optoelectronic component with NSN 5980-01-593-7305 and part number CA66733-001, designated as a critical application item by Moog Inc and Thales USA, Inc. Eighteen units are required to be delivered FOB origin within 80 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking requirements, including specific preservation methods, containment materials, and package codes, while strictly prohibiting mercury or mercury-containing compounds in preservation, packaging, and marking. Portable fluorescent lamps or instruments containing mercury must include shockproof construction and a secondary containment boundary as defined by NAVSEA 5100-003D, with exceptions only for approved functional uses in batteries, instruments, weapon systems, or specified chemical reagents. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Deliveries must be routed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20, and the required ship date is November 3, 2026, with an original delivery deadline of January 28, 2027. The contract value is $324.00 at a unit price of $18.00 per unit.

Semiconductor and Related Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-365L

The contract is for the procurement of 1,429 units of JACK, TIP with NSN 5935-00-466-1245 under solicitation SPE7M5-26-T-365L, issued by the Department of Defense’s Active Devices Division. Delivery is required FOB origin within 174 days, with a specified need ship date of February 5, 2027, and no variance in quantity allowed. All items must be inspected and accepted at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous items must adhere to FED-STD-313 and TQ requirement IP025. All packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 packaging requirements. The use of Class I ozone-depleting substances is strictly prohibited in any phase of manufacturing or processing unless explicit written approval is obtained from the Contracting Officer, and this prohibition supersedes all referenced specifications without affecting performance standards. Sampling inspection is governed by MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes must be verified at specified levels: VII for critical, IV for major, and II for minor, or their corresponding AQLs. The unit of issue is EA, and delivery must be shipped to the DLA Distribution facility in New Cumberland, PA. The contract imposes strict compliance with technical and quality standards referenced via R and I numbers in the DLA Master List, with revisions controlled by either the solicitation issue or award date depending on acquisition size. Commercial items as defined in FAR 11.001 and part-numbered-only items are exempt from the ozone-depleting substance prohibition. All items must be marked per RQ017 physical identification requirements, and government identification must be removed from any non-accepted supplies as per RQ011. The contract specifies the point of contact for inquiries as Margaret Smith, with email and phone provided. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and the NAICS code is 33441

Electronic Connector Manufacturing

POSTED

about 11 hours ago

DEADLINE