Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Control and E-Stop System Integration

Active

Federal

Response Deadline08/07/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the installation and integration of a 15-amp NEMA 12 electrical control panel equipped with relays and transformers, designed to operate in industrial environments with protection against dust, water, and corrosive agents. The work includes full wiring and seamless connection of five or more emergency stop buttons to the lab safety system, ensuring immediate shutdown capability in hazardous situations. All components must be properly sourced, mounted, wired, and tested to meet safety and operational standards applicable to military-grade facilities. The effort is tied to a subcontract under the Department of Defense, specifically for performance at Wright Patterson AFB, with a solicitation posted on August 3, 2026, and a mandatory response deadline of August 7, 2026. The work falls under NAICS code 238210 for electrical contracting, indicating that it is classified as specialized electrical installation and integration services. The contract does not specify a set-aside classification, and all work must be completed to support the safety infrastructure of a federal defense laboratory environment.

General Info

Install 15-amp NEMA 12 panel with emergency stops for military lab at Wright-Patterson AFB by August 7, 2026.

Agency

Department Of Defense → FA8604 Aflcmc PziView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 08:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8604 Aflcmc Pzi

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8604 Aflcmc Pzi

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation and integration of a 15-amp NEMA 12 electrical control panel with relays and transformers, including wiring and connection of five or more emergency stop (E-stop) buttons into the lab safety system.

Similar Contracts

Same NAICS industry code

Electrical Installation and Wiring Services

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and Wiring Services

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract under a Total Small Business Set-Aside, designated for firms certified as small businesses by the SBA, and falls under NAICS code 238210 for electrical contracting. It requires the installation of comprehensive electrical systems including wiring, conduits, panels, and lighting fixtures for commercial or infrastructure projects within the Department of Defense’s Nuclear Reactor Program. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, and the work must be performed at a specified location in San Diego, California, with a zip code of 92136-3581. All eligible small business contractors must submit proposals by the deadline to be considered for award, with performance focused on meeting the technical and safety standards required for defense-related electrical infrastructure.

NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring involves the installation of comprehensive electrical systems for commercial or infrastructure projects under a subcontract arrangement. Scope of work includes the supply and installation of conduits, wiring, electrical panels, and lighting fixtures, with performance required at Cherry Point, North Carolina, ZIP code 28533-0021. The solicitation is administered by the Defense Logistics Agency under the Department of Defense and is classified under NAICS code 238210, which corresponds to electrical contracting. The opportunity was posted on August 5, 2026, with a response deadline of August 13, 2026, providing a narrow window for interested parties to submit proposals. The contract does not specify a set-aside type and lacks detailed point of contact information, requiring potential bidders to reference the official DIBBS portal link for further submission details and technical requirements.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract under the NAICS code 238210, focusing on the installation of comprehensive electrical systems including conduits, wiring, outlets, and lighting fixtures. It was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is specifically located in Tracy, California, with the zip code 95304-5000. The contracting office is part of the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON, though no specific point of contact details are provided. All proposals must be submitted through the DIBBS portal via the provided link before the deadline, and the contract does not specify any set-aside type or additional sourcing restrictions.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services pertains to the installation of electrical systems for commercial or infrastructure projects, encompassing power distribution, lighting, and control wiring. It is issued as a subcontract under the NAICS code 238210, which classifies electrical contracting activities, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The solicitation was posted on August 5, 2026, with a response deadline set for August 25, 2026, and participation is open to qualified subcontractors responding to the request. The performance location and specific project details are not specified in the provided data, but the work is expected to support defense-related infrastructure needs. Interested parties must submit proposals through the designated DIBBS portal before the deadline, and no set-aside provisions or agency-specific restrictions are indicated.

LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Low-Voltage and Communication Systems

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and Wiring Services

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 8 hours ago

DEADLINE

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8604 Aflcmc Pzi

Same awarding agency

Materials Handling System at OSAN AB, Republic of Korea

Solicitation # FA860426QB006

The U.S. Air Force is soliciting offers for a Materials Handling System to be delivered and installed at Osan Air Base in the Republic of Korea under solicitation number FA860426QB006, which is a combined synopsis and solicitation issued as a Request for Quote. This acquisition is exclusively reserved for small business concerns under a total small business set-aside as defined by FAR 19.5, with the NAICS code 333922 indicating it pertains to industrial machinery manufacturing. The requirement includes ten contract line item numbers with specific technical specifications outlined in the solicitation, and performance must be completed within 330 days from award. Proposals must be submitted by the deadline of August 5, 2026, and no separate written solicitation will be issued. The contract is managed by the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base, Ohio, with primary point of contact Jennifer Jensen and secondary contact Brent Otten for inquiries. All relevant provisions and clauses are incorporated by reference and accessible via www.acquisition.gov.

Conveyor and Conveying Equipment Manufacturing

POSTED

DEADLINE

Storage Aid System Vandenberg SFB, CA

Solicitation # FA860426RB023

The U.S. Air Force is seeking commercial products or services through a combined synopsis and solicitation for a Storage Aid System to be delivered to Vandenberg Space Force Base in California under solicitation number FA860426RB023. This acquisition is exclusively set aside for small business concerns as defined by the Small Business Administration, and the solicitation is issued under FAR Part 12 procedures, meaning no separate written request will be distributed. The requirement includes 11 contract line item numbers with a total performance period of 300 days from the award date. The NAICS code 333922 applies to this procurement, identifying it within the industrial classification for other industrial machinery and equipment manufacturing. All provisions and clauses are incorporated by reference and are accessible via the official acquisition website. The solicitation was posted on July 7, 2026, with proposals due by August 13, 2026, at 7:00 PM EST. The contract will be managed by the Air Force Life Cycle Management Center based at Wright-Patterson Air Force Base, Ohio, with primary point of contact Jennifer Jensen and secondary contact Maggie Seid available for inquiries.

Conveyor and Conveying Equipment Manufacturing

POSTED

DEADLINE

Commissioning, Training, and DocumentationThe contract requires the performer to conduct functional testing at 150 percent of the system’s rated capacity to validate performance under heightened operational stress, ensuring reliability and safety prior to acceptance by Wright Patterson Air Force Base Civil Engineering. It further mandates the delivery of two hours of hands-on operator training to equip personnel with the necessary skills to effectively manage and monitor the system, alongside the provision of comprehensive user and maintenance manuals that detail operational procedures, troubleshooting protocols, and service requirements. All deliverables are designed to meet the specific acceptance criteria of WPAFB Civil Engineering, with full compliance required to facilitate formal system approval. The solicitation, classified as a subcontract under NAICS code 541330, was posted on August 3, 2026, with responses due by August 7, 2026, and performance is to be carried out at Wright Patterson AFB.

Engineering Services

POSTED

DEADLINE

Gas System Component SupplyThe contract calls for the supply of industrial gas valves, regulators, manifolds, and fittings designed for high-pressure fuel and oxidizer applications, with all components required to comply with ASME B31.3 standards and oxygen-clean specifications to ensure safety and performance in critical environments. The items must be engineered to withstand extreme pressures and reactive media, with strict adherence to cleaning and documentation protocols to prevent contamination. This is a subcontract issued under the NAICS code 332911 for other fabricated metal product manufacturing, associated with the Department of Defense through the FA8604 Aflcmc Pzi office, with performance tied to Wright Patterson Air Force Base. Interested parties must submit responses by August 7, 2026, at 8:00 PM, following the solicitation posted on August 3, 2026. All deliverables must meet stringent quality and compatibility requirements for use in defense-related propulsion or life support systems.

Industrial Valve Manufacturing

POSTED

DEADLINE

High-Purity Gas Piping System InstallationThe contract entails the installation of a high-purity gas piping system consisting of 12 new gas lines constructed from 316L stainless steel and oxygen-grade copper, designed for demanding environments requiring exceptional material purity and resistance to contamination. The work includes precise routing of the lines, secure support installation, and full integration with existing fuel and oxidizer service panels, along with the implementation of calibrated pressure regulation systems to ensure safe and consistent gas delivery. All components and installation methods must meet stringent purity and performance standards to support critical operations at the designated facility. This subcontract is associated with the Department of Defense under the agency designation FA8604 Aflcmc Pzi, with performance taking place at Wright Patterson AFB. The solicitation was posted on August 3, 2026, and responses are due by August 7, 2026, indicating a tight turnaround window for qualified subcontractors. The North American Industry Classification System code 238220 identifies the work as plumbing, heating, and air-conditioning contracting, underscoring the technical nature of the installation. All work must comply with defense-grade specifications for safety, reliability, and compatibility with high-purity gas systems used in sensitive aerospace or research applications.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Exhaust Ducting System InstallationThe contract entails the demolition of existing single-wall ducting and the installation of new B Vent-compliant exhaust ducting systems within the lab infrastructure at Wright Patterson AFB. This work includes proper routing of the new ductwork, installation of manual dampers for airflow control, and incorporation of in-duct access ports to facilitate future maintenance and inspection. All components must be securely supported and fully integrated with existing facility systems to meet operational and safety requirements. The scope requires compliance with B Vent standards, ensuring proper ventilation performance and adherence to industrial exhaust guidelines. This subcontract is issued under NAICS code 238220 for Mechanical Contracting and is managed by the Department of Defense through the FA8604 Aflcmc Pzi office. The solicitation was posted on August 3, 2026, with responses due by August 7, 2026, at 8:00 PM. The work must be performed at Wright Patterson AFB, and all materials and methods must align with federal facility standards. Contractors are expected to deliver a fully functional, code-compliant exhaust system that supports lab safety without disrupting adjacent operations during or after installation.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Gas Line Distribution and Exhaust Safety System for Combustion Analysis Lab

Solicitation # AFLCMC_PZIBA_COAL

The United States Air Force, through the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base, is conducting market research to identify qualified sources capable of providing an updated gas line distribution and exhaust safety system for the Combustion Analysis Lab at the Air Force Institute of Technology. This effort is strictly for information gathering and does not constitute a solicitation or commitment to award a contract. Interested vendors, particularly small businesses including 8(a), HUBZone, EDWOSB, WOSB, and SDVOSB entities, are invited to submit a concise capabilities package not exceeding five pages that demonstrates technical compliance with the stated requirements. Responses must be emailed to Lt Arlyn Argueta and Claire Hess by 4:00 PM Eastern Time on August 7, 2026, with the exact subject line “Sources Sought – Gas Line Distribution and Exhaust Safety System”; submissions failing to meet formatting requirements, including prohibited file types like .zip or .exe, will be discarded. Only .pdf, .doc, .docx, .xls, or .xlsx attachments are permitted. The acquisition is classified under NAICS code 332911 for Industrial Valve Manufacturing with a small business size standard of 750 employees, and all respondents must be registered in the System for Award Management to be eligible for future contract awards. The Government has not yet decided whether to pursue a small business set-aside and will use submitted responses to inform its sourcing strategy, including potential application of FAR limitations on subcontracting and the non-manufacturer rule. No costs incurred in preparing responses will be reimbursed, and no individual feedback will be provided. The decision to proceed with a formal solicitation rests entirely with the Government. All questions should be directed to the designated points of contact, and submissions must strictly adhere to the specified email format and deadlines to be considered.

Industrial Valve Manufacturing

POSTED

DEADLINE

Storage Aid System - Randolph AFB, Texas

Solicitation # FA860426QB004

The contract pertains to the procurement of a Storage Aid System for Randolph Air Force Base in Texas under solicitation number FA860426QB004, which is issued as a combined synopsis and solicitation for commercial products or services in accordance with FAR Part 12. This is a total small business set-aside, meaning only certified small business concerns are eligible to respond, with the NAICS code 333922 identifying the industry as Other Commercial and Industrial Machinery and Equipment Manufacturing. The requirement consists of 13 line items with a 240-day period of performance, and all provisions and clauses are incorporated by reference and available electronically at www.acquisition.gov. The response deadline has been extended to August 3, 2026, at 3 PM EST, with the official submission deadline listed as 8:00 PM EST. The contract is managed by the Department of Defense through the agency office FA8604 Aflcmc Pzi located at Wright-Patterson Air Force Base, Ohio, with primary point of contact Jennifer Jensen and secondary contact Brent Otten. The place of performance is identified with a zip code of 78150, corresponding to the location of Randolph AFB, Texas.

Conveyor and Conveying Equipment Manufacturing

POSTED

DEADLINE

Edwards AFB Storage Aid System

Solicitation # FA860426QB011

The contract solicitation FA860426QB011 seeks offers for a Storage Aid System to be delivered to Edwards Air Force Base in California, with a strict 240-day performance period and a total small business set-aside under SBA guidelines. It is issued as a combined synopsis and solicitation under FAR Part 12, meaning no separate written request will be provided, and responses must be submitted as quotes by the deadline of September 7, 2026. The requirement includes 14 CLINs with detailed specifications referenced in the solicitation, and all applicable provisions and clauses are incorporated by reference through www.acquisition.gov. The acquisition is managed by the Department of Defense through the FA8604 AFLCMC PZI office located at Wright-Patterson AFB, Ohio, with Jennifer Jensen as the primary point of contact for inquiries. The solicitation is open exclusively to small business concerns and is classified under NAICS code 333922, indicating its alignment with manufacturing machinery for industrial purposes. The place of performance is specified with a zip code of 93524, corresponding to Edwards AFB, and all offers must comply with the requirements outlined in the electronic solicitation available via the SAM.gov portal. Bidders are required to adhere strictly to the submission deadlines and formatting guidelines detailed in the RFQ, as no extensions or alternative submission methods are permitted. The contract will be awarded based on responsive, compliant, and best-value proposals that meet the technical and commercial terms established for the Storage Aid System.

Conveyor and Conveying Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

MacDill AFB Storage Aid System

Solicitation # FA860426QB005

The solicitation FA860426QB005 is a combined synopsis and request for proposal for a Storage Aid System at MacDill Air Force Base in Florida, issued under FAR Part 12 as a commercial acquisition set aside exclusively for small businesses. The contract involves the modification of Appendix D and Drawing BMC302-03, along with the incorporation of responses to outstanding RFI inquiries, targeting three distinct buildings with separate phases and variable performance periods. There are 34 contract line item numbers specified in the solicitation, each requiring adherence to detailed technical specifications and performance requirements outlined in the document. The activity is administered by the Department of Defense through the FA8604 Aflcmc Pzi office located at Wright Patterson Air Force Base, Ohio, with performance expected to occur at MacDill AFB, Florida, in the 33621 zip code area. Proposals must be submitted by August 10, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 30, 2026. All relevant provisions and clauses are incorporated by reference and can be accessed via acquisition.gov. The North American Industry Classification System code is 333922, indicating the type of industrial classification applicable to this procurement. Primary and secondary points of contact are provided for inquiries, with Jennifer Jensen and Christy Delk listed as the main and supporting representatives respectively. Interested parties are directed to the SAM.gov workspace link for the full solicitation details and to ensure compliance with submission requirements.

Conveyor and Conveying Equipment Manufacturing

POSTED

DEADLINE

Travis AFB Storage Aid System

Solicitation # FA860426QB007

The U.S. Air Force is seeking quotes for a Storage Aid System at Travis Air Force Base, California, through a combined synopsis and solicitation issued under FAR Part 12 for commercial items. This procurement, identified by solicitation number FA860426QB007, is exclusively set aside for small business concerns as a total small business set-aside, with the NAICS code 333922 indicating it pertains to other commercial and industrial machinery and equipment manufacturing. The requirement includes 24 contract line item numbers with a performance period of 365 days, and all offers must be submitted by the deadline of September 2, 2026. The solicitation incorporates provisions and clauses by reference, which are accessible electronically via acquisition.gov, and no separate written solicitation will be issued. The place of performance is listed with a ZIP code of 94535, and inquiries should be directed to the primary point of contact, Jennifer Jensen, or secondary contact Brent Otten, via the provided email addresses and phone number. The office responsible for this acquisition is located at Wright-Patterson Air Force Base, Ohio, under the Department of Defense.

Conveyor and Conveying Equipment Manufacturing

POSTED

DEADLINE

Ebbing ANGB, Arkansas Storage Aid System

Solicitation # FA860426RB022

The U.S. Air Force is seeking commercial products or services through a combined synopsis and solicitation for a Storage Aid System at Ebbing Air National Guard Base in Arkansas, identified by solicitation number FA860426RB022. This acquisition is exclusively set aside for small business concerns under the Small Business Administration’s Total Small Business Set-Aside provisions, with the NAICS code 333922 indicating a focus on industrial machinery manufacturing. The requirement includes 14 contract line item numbers and has a performance period of 230 days from award, with all technical specifications and required line items detailed within the solicitation document. The solicitation does not include a separate written request, and all provisions and clauses are incorporated by reference, accessible through the official acquisition website. Proposals must be submitted by the deadline of August 10, 2026, with the solicitation posted on July 2, 2026. The contracting office is located at Wright-Patterson Air Force Base in Ohio, under the Department of Defense, and is managed by the FA8604 Aflcmc Pzi office. Primary point of contact is Jennifer Jensen, reachable via email and phone, with Maggie Seid serving as the secondary contact. The place of performance is listed with a ZIP code of 72903, corresponding to the location of Ebbing ANGB in Arkansas. All offers must be submitted electronically through the SAM.gov portal, and no paper submissions will be accepted. The procurement is conducted under FAR Part 12 procedures for commercial items, emphasizing streamlined acquisition processes suited for commercial off-the-shelf solutions.

Conveyor and Conveying Equipment Manufacturing

POSTED

about 1 month ago

DEADLINE