Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FILTER, WATER PURIFI

Active
SPE8E8-26-Q-0445Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 67 units of a water filter, identified by NSN 4610-01-653-9254 and part number 770020 from General Ecology Inc., under solicitation SPE8E8-26-Q-0445, with a firm fixed price and no variance allowed in quantity. Delivery is required within 30 days after award, with inspection and acceptance occurring at the destination. The item is classified as a critical application and requires FAA airworthiness approval. Packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA-specific requirements, including zero special marking codes and palletization per DLA standards. Traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03 from August 2016, and supply chain documentation must support full traceability. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision control dependent on acquisition type and solicitation amendments. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. The shipment will be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and transportation guidelines are governed by DLAD Procurement Notes C19 and C20.

General Info

Procure 67 water filters, NSN 4610-01-653-9254, delivery in 30 days, FAA-approved, compliant with MIL-STD and DLA traceability.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

N/A

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-Q-0445.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
MARYLINE OKWAMBA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER,WATER PURIFI
RQ046: FAA Bare Item Marking Requirements RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
CRITICAL APPLICATION ITEM
GENERAL ECOLOGY, INC. 61372 P/N 770020
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E8-26-Q-0445
SECTION B
SUPPLY/SERVICE: 4610-01-653-9254 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 4610-01-653-9254 67.000 EA $ _______________ $ ______________ FILTER,WATER PURIFI
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:E5 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7015394394 0001 N/A N/A N/A 07/09/2026

SPE8E8-26-Q-0445 NSN/Part Number: 4610-01-653-9254 Quantity: 67 EA Purchase Request: 7015394394QTY: 67 Delivery: 30 days ADO

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 336310
New
DIBBS
VALVE, ROTARY, SELECT
Solicitation # SPE7MC-26-Q-0403
The contract pertains to the procurement of six rotary select valves identified by the NSN 4820-01-642-0631 under solicitation SPE7MC-26-Q-0403, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 300 days after award, with inspection and acceptance occurring at the destination. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications including ASTM D3951, and packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specifications. Packaging must be palletized according to DLA requirements, and units are to be shipped to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract specifies the unit of issue as each, with pricing and delivery tied to the government’s external procurement system and transportation governed by DLAD Proc Notes C19 and C20. The item is classified under NAICS 336310, with a required delivery date of May 10, 2027, and the primary point of contact is Janelle Hanley of the Department of Defense.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325211
New
DIBBS
PLASTIC STRIP, PRESSURE
Solicitation # SPE8E5-26-T-3753
The contract specifies the procurement of a pressure-sensitive adhesive plastic strip, identified by NSN 9330-01-428-7082 and part number 8681-GRAY-36270 from 3M Company, with a total quantity of seven rope units, each comprising 36 yards, for a total of 252 yards. The item is classified as a Type I, Code M shelf-life item with a fixed 24-month shelf life that is non-extendable, and it is designated as a critical application item subject to strict quality and technical standards. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for Type I shelf-life items, and palletization must adhere to DLA packaging requirements. The product is subject to DLA Master List technical and quality requirements referenced by R and I codes, and all packaging, marking, and shipping must meet applicable hazardous materials standards. Delivery is required FOB origin within 49 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The designated delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of July 8, 2026, and an original delivery date of October 9, 2026. Transportation logistics follow DLA Procurement Notes C19 and C20, and the contract number is SPE8E5-26-T-3753. The item falls under NAICS code 325211 and was solicited by the Department of Defense through the DLA New Cumberland facility, with Don Trachtman listed as the primary point of contact. The unit of issue is defined as a rope, consistent with DoD standards, and all documentation must align with the authorized ANSI X12 unit of issue reference.
Plastics Material and Resin Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-164V
This contract is for the procurement of a regulating valve designed for gaseous oxygen media, identified by NSN 4820-01-319-0745 and part number 0799-1607 from Victor Equipment Co. A total of 79 units are required at a unit price of $79.00, with a total contract value of $6,241. The delivery schedule mandates shipment within 17 days after award, with delivery made FOB origin and no tolerance allowed for quantity variance. Inspection and acceptance occur at the destination location, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking required. Cleaning must follow MIL-STD-1330, and palletization must meet DLA standards. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the valve unless part of a specified exception such as functional components in instruments or sensors as permitted by NAVSEA, and any portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. The solicitation is issued under contract number SPE7MC-26-T-164V as a total small business set-aside under NAICS code 332912, with a response deadline of August 14, 2026, and posted on August 3, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on procurement size. The unit of issue is each (EA), consistent with DLA’s authorized standards. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The primary point of contact for the contract is Alex Xanthakis of the Department of Defense’s DDSP New Cumberland Facility, reachable via email and phone. The delivery is scheduled for completion by October 10, 2026, with an initial ship date required no later than September 1, 2026.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military Packaging & Preservation ServicesThe contract requires comprehensive military packaging and preservation services compliant with MIL-STD-2073-1E standards, specifically utilizing the Air Evacuation method to ensure proper environmental protection of sensitive military equipment. All items must be packaged under clean and dry conditions to prevent contamination or degradation during storage and transport. Additionally, each package must be labeled in accordance with MIL-STD-129 requirements, including accurate barcoding for automated tracking and inventory management throughout the defense logistics chain. The work is to be performed at the New Cumberland facility with a zip code of 17070-5002, aligning with Department of Defense operational protocols. This subcontract is issued by the DDSP New Cumberland Facility under the NAICS code 561910, which designates it as a specialized support service within the defense logistics sector. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, indicating a narrow window for qualified vendors to submit proposals. The contract emphasizes strict adherence to federal military standards, requiring precise execution of packaging techniques and labeling procedures to meet readiness and inspection criteria. Performance location and compliance specifications underscore the critical nature of this assignment in maintaining the integrity and deployability of military materiel.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling SupportThe contract entails providing technical documentation and regulatory support for hazard warning labels on valves that contain hazardous substances, ensuring compliance with applicable safety and environmental regulations. The work requires precise labeling that accurately conveys risks associated with the materials within the valves, along with supporting documentation to validate adherence to federal and international hazardous materials standards. This is a subcontract under the NAICS code 541690, issued by the Department of Defense through its New Cumberland Facility, with performance required at the location in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 2, 2026, with a mandatory response deadline of August 13, 2026. There is no set-aside classification specified, and the contract is structured as a direct subcontract without public bid details beyond the provided DIBBS link. The focus is strictly on compliance-related technical services rather than manufacturing or supply, meaning the successful contractor must demonstrate expertise in hazard communication standards, regulatory frameworks, and the preparation of legally defensible labeling documentation for hazardous industrial components.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
Supply of Ported Ball Valve (CLIN 0001)The contract solicits the supply and delivery of a single ported ball valve that must fully comply with military packaging, labeling, and hazardous materials regulations, ensuring safe handling and transport according to defense standards. The item is designated under CLIN 0001 and is part of a subcontract under the NAICS code 332912, which pertains to other fabricated metal product manufacturing. The posting date is August 2, 2026, with a response deadline of August 13, 2026, providing potential vendors a twelve-day window to submit bids. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the location where the valve must be delivered for military use. The acquiring organization is the DDSP New Cumberland Facility under the Department of Defense, which will oversee compliance with all technical, regulatory, and logistical requirements outlined in the solicitation. All submissions must adhere strictly to the specified military specifications, and bidders are expected to confirm their ability to meet these criteria prior to proposal submission.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 811111
New
DIBBS
Small Business Subcontracting Participation (Socioeconomic Categories)Certified small businesses including WOSB, SDVOSB, HUBZone, MBE, and DBE entities are invited to engage as subcontractors or joint venture partners on a Department of Defense contract managed by the DDSP NEW CUMBERLAND FACILITY. The opportunity is tied to the NAICS code 811111, which corresponds to architectural and engineering services, with performance expected to take place at the New Cumberland location with ZIP code 17070-5002. This subcontracting opportunity is open to eligible socioeconomic categories without a specified set-aside designation, allowing certified small businesses to align with the prime contractor to fulfill contract obligations. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with interested parties directed to the official DIBBS portal via the provided URL to access full details and submit proposals.
General Automotive Repair

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity for Contractor Information SystemsThe contract requires the implementation and ongoing maintenance of cybersecurity controls as defined by NIST Special Publication 800-171 to safeguard covered defense information on contractor information systems. This effort is focused on ensuring compliance with federal standards designed to protect sensitive information handled by defense contractors, with all controls to be fully operational and continuously monitored throughout the performance period. The work is classified as a subcontract under the NAICS code 541512, indicating it involves computer systems design and related services tailored to meet specific defense information security requirements. Performance is to be conducted at the New Cumberland facility with a ZIP code of 17070-5002, and the responsible agency is the Department of Defense through its DDSP New Cumberland Facility. The contract opportunity was posted on August 2, 2026, and responses are due by August 13, 2026. While no specific set-aside classification or point of contact is provided, the solicitation emphasizes strict adherence to NIST SP 800-171 requirements, and failure to meet these controls will result in non-compliance. The contractor must demonstrate the ability to sustain these protections over time, including regular assessments, documentation, and remediation of identified vulnerabilities to maintain the integrity and confidentiality of covered defense information.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Materials Handling and PackagingThe contract mandates the safe packaging, labeling, and transportation of hazardous materials generated during vehicle repair operations, specifically including used oils, lead-acid batteries, and industrial solvents. All activities must comply with applicable federal and state regulations to ensure environmental safety and personnel protection throughout the handling process. The work is to be performed at the New Cumberland facility with a zip code of 17070-5002, and the subcontractor is expected to demonstrate proven expertise in managing hazardous waste from automotive maintenance environments. The solicitation, posted on August 2, 2026, requires responses by August 13, 2026, and falls under NAICS code 562910, which pertains to other remediation services. This is a subcontract awarded through the Department of Defense’s DDSP New Cumberland Facility, with no set-aside designation specified. The contractor must ensure timely, compliant, and secure logistics for hazardous waste streams, with performance strictly tied to the designated location and regulatory standards for waste handling, storage, and offsite transport.
Remediation Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 811111
New
DIBBS
Vehicle Maintenance and Repair ServicesThe contract titled Vehicle Maintenance and Repair Services calls for comprehensive labor and service to inspect, diagnose, and repair government fleet vehicles, covering critical systems such as engines, brakes, suspensions, and electrical components. Work is anticipated to take place at the New Cumberland facility with a zip code of 17070-5002, under the authority of the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The solicitation, identified under NAICS code 811111 for Automotive Repair and Maintenance, is structured as a subcontract and requires responses no later than August 13, 2026, with the request posted on August 2, 2026. All performance must meet the operational standards and requirements dictated by the defense agency for maintaining mission-ready fleet vehicles.
General Automotive Repair

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 423120
New
DIBBS
Vehicle Maintenance and Repair Parts SupplyThe contract calls for the supply of replacement mechanical, electrical, and structural components to support maintenance and repair operations for military and government fleet vehicles, ensuring operational readiness and prolonged service life of critical transportation assets. The scope is focused exclusively on parts procurement, with an emphasis on compatibility, durability, and compliance with military specifications to meet the demanding performance standards of defense operations. The procurement is structured as a subcontract and is tied to the NAICS code 423120, which designates wholesale trade of motor vehicle supplies and new parts, indicating the industrial sector serving this requirement. The opportunity was posted on August 2, 2026, with responses due by August 13, 2026, and performance is expected to be delivered to the DOD facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, though no specific point of contact or set-aside provisions are outlined. Bidders must be prepared to meet rigorous quality control, logistics, and delivery timelines to support the continuous operational needs of military fleets, with all submissions coordinated through the DIBBS platform using the provided RFQ link.
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Regulatory and Compliance Support ServicesThe contract seeks consulting support to ensure compliance with multiple federal regulatory requirements, including the Buy American Act and the Berry Amendment, which govern domestic sourcing of materials and products for government contracts. Additional support is required to meet hazardous materials reporting obligations under OSHA 29 CFR 1910.1200, ensuring proper handling, labeling, and documentation of chemical substances. Cybersecurity compliance under NIST Special Publication 800-171 is also a critical component, mandating implementation of safeguards to protect controlled unclassified information within contractor systems. The services are to be performed at the New Cumberland facility with a zip code of 17070-5002, and the subcontract is classified under NAICS code 541611, indicating management, scientific, and technical consulting services. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and is managed by the Department of Defense through its DDSP New Cumberland Facility.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details