Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Fire Suppression System Maintenance Planning

Active

Federal

Response Deadline09/11/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Fire Suppression System Maintenance Planning is a subcontract issued by the US Embassy in Accra under the Department of State, aimed at developing a comprehensive preventive maintenance plan for fire suppression systems including fire alarms, sprinklers, fire extinguishers, and emergency egress infrastructure. The plan must fully align with National Fire Protection Association standards and applicable local fire safety regulations to ensure the safety and compliance of embassy facilities in Accra. Work is to be performed at the embassy’s location in Accra with a ZIP code of 00233, and the NAICS code 541380 indicates this falls under other scientific and technical consulting services. The solicitation was posted on July 27, 2026, with a strict response deadline of September 11, 2026, at 2:00 PM local time. All proposals must demonstrate technical expertise in fire safety systems, a clear methodology for maintenance scheduling, and proven experience working within international governmental environments to meet stringent federal and host nation safety requirements.

General Info

Fire suppression maintenance plan for US Embassy Accra, aligning with NFPA and local regulations, due September 11, 2026.

Agency

Department Of State → US Embassy AccraView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

ACCRA, GH-AA, 00233, GHA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineSep 11

Submission deadline

Response Deadline

09/11/2026, 02:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of State → US Embassy Accra

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of State → US Embassy Accra

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development of a preventive maintenance plan for fire suppression systems, including fire alarms, sprinklers, extinguishers, and emergency egress, aligned with NFPA and local fire safety standards.

Similar Contracts

Same NAICS industry code

Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.

LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Counterfeit Electronic Parts Detection & Avoidance System ImplementationThe contract seeks the implementation of a comprehensive counterfeit electronic parts prevention and detection system to safeguard the integrity of components used in defense applications. This includes establishing rigorous supplier screening procedures, standardized part authentication protocols, and validated testing methods to identify and isolate suspect components. The contractor will be responsible for developing and maintaining a system that ensures consistent detection of counterfeit electronics throughout the supply chain, with clear processes for documenting, reporting, and escalating suspected nonconforming items. The system must comply with industry best practices and government standards for electronic parts reliability and supply chain security. This is a small business set-aside subcontract under NAICS code 541380, issued by the ASC Commodities Division of the Department of Defense, with proposals due by August 11, 2026. The work is intended to support defense logistics and procurement integrity, requiring the contractor to demonstrate technical capability in electronics verification, supply chain risk management, and reporting mechanisms. Although the place of performance and point of contact details are unspecified, the effort is expected to involve coordination across multiple tiers of suppliers and internal quality assurance teams to ensure end-to-end visibility and accountability. All activities must align with federal acquisition regulations governing small business participation and defense supply chain resilience.

ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Thermal Protection System (TPS) Fiber Trade Studies and Material EvaluationThe contract involves conducting comprehensive trade studies to evaluate fiber diameter, carbon-to-phenolic composition, and performance characteristics of materials intended for NASA’s Thermal Protection System applications. These studies require detailed analysis of material behavior under extreme thermal and mechanical conditions to identify optimal formulations and configurations that enhance performance, durability, and mass efficiency for spacecraft re-entry environments. The work includes collecting, interpreting, and correlating experimental data to support decision-making in material selection and system design, with a strong emphasis on technical documentation and reporting to communicate findings clearly to NASA engineering teams. The subcontract is open for response until August 1, 2026, and falls under NAICS code 541380, indicating it is for other scientific and technical consulting services. It is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and while the place of performance is unspecified, the work is expected to support critical TPS development efforts for future space missions. The solicitation, posted on July 29, 2026, targets specialized contractors with expertise in advanced composite materials and aerospace thermal protection systems, requiring precision in testing methodologies and analytical rigor to meet NASA’s high-performance standards.

NASA Shared Services Center

POSTED

about 7 hours ago

DEADLINE

C26651005 Water Testing and Analyses ServicesThe contractor is required to provide comprehensive water testing and analytical services for public use water systems located in State Parks across western Sonoma County, California, including the collection and analysis of water samples gathered by park staff. This contract involves furnishing all necessary materials, tools, equipment, and labor to perform the testing, with results to be submitted to both the State Water Resources Control Board’s Division of Drinking Water and the California Department of Parks and Recreation. The scope of work is a re-bid of solicitation C25651009 and follows the detailed specifications outlined in the standard state agreement. The contract is being issued under solicitation number 0000039900, posted on July 28, 2026, with responses due by August 11, 2026, and the work will be performed within Sonoma County. Point of contact for inquiries is Leigia Nunez, reachable via phone or email provided.

California Department of Parks & Recreation

POSTED

about 21 hours ago

DEADLINE

Materials Testing & Laboratory ServicesThe contract titled Materials Testing & Laboratory Services requires the performance of comprehensive soil, concrete, and construction materials testing to verify adherence to ASTM, AASHTO, and specific project standards. The work is intended to support infrastructure and construction projects under the oversight of the River Valley Regional Commission in Georgia, ensuring that all materials meet required engineering and safety benchmarks before and during implementation. Testing services must be conducted with precision and documented thoroughly to maintain regulatory compliance and project integrity. This is a subcontract opportunity with a NAICS code of 541380, indicating it falls under the category of architectural, engineering, and related services. The solicitation was posted on July 28, 2026, with a firm deadline for responses set for August 31, 2026, at 3:00 PM. The place of performance and specific location details are not provided, suggesting the scope may cover multiple sites within Georgia under the commission's jurisdiction. Bidders are expected to demonstrate established laboratory capabilities, qualified personnel, and familiarity with federal and state testing protocols to be considered for award.

River Valley Regional Commission

POSTED

DEADLINE

in about 1 month

Mill Certification and Quality Documentation ServicesThe contract requires the provision of comprehensive mill certification and quality documentation services for pipe shipments, with a focus on generating and submitting accurate mill test reports, heat numbers, tally sheets, and stenciled compliance data. All documentation must fully comply with the technical specifications of API 5L, ASTM A53B, and API 5LI standards to ensure the integrity and traceability of materials used in pipeline systems. The contractor is responsible for maintaining rigorous quality control throughout the documentation process to meet industry regulatory requirements and client expectations. This subcontract opportunity is issued by Philadelphia Gas Works under the NAICS code 541380 and is open for response until August 5, 2026. While no set-aside designation is specified, the work is expected to be performed in support of Pennsylvania-based infrastructure projects, though the exact performance location is not detailed. Bidders must ensure their capabilities align with the demanding documentation and compliance requirements and submit their proposals through the designated portal by the stated deadline.

Philadelphia Gas Works

POSTED

DEADLINE

Bid Solicitation for Annual Calibration of instruments and equipment for all branches of MS Forensic LaboratoryThe Mississippi Department of Public Safety is soliciting bids for the annual calibration of instruments and equipment across all branches of the MS Forensic Laboratory, under solicitation number 1711-27-R-IFBD-00001. The solicitation, posted on July 28, 2026, requires responders to submit proposals by August 27, 2026, to ensure timely and accurate calibration services vital to forensic operations statewide. The work must be performed throughout Mississippi, with all equipment calibrated in accordance with industry standards to maintain the integrity of forensic analysis and legal proceedings. The contract is managed by the State and Local Government (SLED) agency, with Sonya Williams serving as the primary point of contact for all inquiries, reachable via phone or email. While no specific set-aside or NAICS code is indicated, the procurement is open to qualified vendors capable of delivering comprehensive, reliable, and compliant calibration services across multiple laboratory sites. Proposals must demonstrate technical capability, experience with forensic instrumentation, and adherence to quality assurance protocols to meet the rigorous demands of the state’s forensic infrastructure.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Quality Inspection and Conformance TestingThe contract requires execution of first-article or batch inspections to verify quality attributes classified as critical, major, and minor, using MIL-STD-1916 or ASQ Z1.4 sampling plans to ensure conformance with specified standards. Inspections must be carried out in accordance with zero-based sampling methodologies to validate product quality at predefined stages of production, ensuring compliance with rigorous defense-related quality expectations. The work is scoped under the NAICS code 541380, indicating a focus on engineering services, and is structured as a subcontract under the Department of Defense’s Land Supply Chain organization. Performance is designated to occur at Chambersburg, Pennsylvania, with a 17201-4150 zip code, and the submission window for proposals closes on August 10, 2026, following a July 28, 2026 posting date. The solicitation is managed through the DIBBS system under reference SPE7L126T884E, and bidders must be prepared to meet DoD quality assurance protocols with no flexibility in sampling methodology. While no set-aside type is specified, the contract requires full compliance with federal and military standards for inspection processes, and all work must be completed in alignment with the precise technical requirements outlined in the referenced standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract mandates radiological screening of filter assemblies to detect and notify the government if any radioactive materials exceed established regulatory thresholds, in full compliance with FAR 52.223-7 and MIL-STD-129 requirements. All filter assemblies must be inspected and documented to ensure they do not contain radioactive contaminants above permissible levels, and any discovery of such materials must trigger an immediate and formal notification to the contracting agency. This requirement applies to all deliveries under the subcontract and is intended to safeguard personnel, facilities, and the supply chain from potential radiological hazards. The solicitation is classified as a subcontract under NAICS code 541380 and is administered by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at San Diego, CA 92135-5000. Responses must be submitted by August 10, 2026, with the opportunity posted on July 28, 2026. While no set-aside designation is specified, the contract emphasizes strict adherence to federal and military standards for radiological safety, and all participants must be prepared to provide verifiable testing documentation and notification protocols as part of compliance. No point of contact is listed, and all inquiries must be directed through the official DIBBS platform linked in the solicitation.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Radioactive Materials Notification & Labeling (If Applicable)The contract requires the detection and reporting of radioactive materials that exceed established regulatory thresholds, ensuring compliance with federal safety and handling standards. All identified materials must be properly labeled according to MIL-STD-129 specifications, which dictate uniform marking and identification protocols for military shipments and inventory. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance obligated at Cherry Point, North Carolina, under the NAICS code 541380, indicating it pertains to other scientific and technical consulting services. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with no set-aside provisions specified, meaning it is open to all eligible contractors regardless of business size or status.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

First Article Testing (FAT) and Qualification ServicesThe contract calls for comprehensive First Article Testing (FAT) and qualification services in accordance with MIL-STD requirements, encompassing dimensional, material, and functional evaluations to ensure compliance with specified performance and quality standards. All testing outcomes must be documented and reported in full alignment with DI-NDTI-80809B guidelines, ensuring standardized, auditable deliverables that meet Department of Defense expectations for reliability and traceability. This subcontract supports critical sourcing efforts under the NAICS code 541380 and is managed by the LAND SUPPLIER OPNS VEHICLE SPT activity within the Department of Defense. Responses are due by August 7, 2026, and the solicitation remains open for qualified subcontractors ready to execute precise, standards-driven testing services. The work is expected to be performed wherever the supplier is located, with no specific geographic restrictions noted. This opportunity is not designated for any particular set-aside classification and is accessible to all eligible vendors capable of fulfilling the technical and reporting obligations outlined in the requirements.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)If nonmetallic tubing is utilized in any system that contains licensed radioactive materials, immediate written notification must be provided to the Contracting Officer in accordance with 10 CFR regulations and established radiological safety protocols. This requirement is mandatory and applies to all subcontract activities under this agreement, ensuring compliance with federal standards for handling radioactive substances and maintaining the integrity of radiological controls. The obligation to notify is triggered solely by the presence of nonmetallic tubing in such systems, regardless of the volume or concentration of radioactive material involved. This contract is a subcontract under the Department of Defense’s MARITIME SUPPLY CHAIN ESOC BUYS, classified under NAICS code 541380, and was posted on July 28, 2026, with responses due by August 10, 2026. While specific performance location and point of contact details are not provided, the requirement is enforceable across all relevant work sites where contracted activities involve systems containing licensed radioactive materials. Failure to provide timely notification may result in noncompliance penalties and operational restrictions under federal radiological safety guidelines.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of State → US Embassy Accra

Same awarding agency

Local Licensing and Permitting ServicesThe contract involves securing all necessary local permits, approvals, and regulatory clearances in Accra, Ghana, to enable the conduct of assessment work. The scope is focused exclusively on navigating Ghana’s local bureaucratic and regulatory environment to ensure full compliance with municipal, environmental, and operational requirements. This service is essential for the smooth execution of activities under the auspices of the US Embassy Accra, Department of State, and must be completed prior to any fieldwork beginning. The opportunity is listed as a subcontract with a NAICS code of 541611, indicating it falls under organizational consulting services, and is open for responses until September 11, 2026. Performance is strictly confined to Accra, with the postal code 00233, and the work must be carried out within the timeframe aligned with the broader assessment schedule. While no set-aside provisions or specific organizational eligibility criteria are indicated, bidders must demonstrate proven experience in Ghana’s permitting landscape and a clear plan for timely coordination with local authorities to avoid project delays.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Mechanical and Plumbing (HVAC & Piping) InspectionThe contract pertains to a comprehensive inspection of mechanical and plumbing systems, specifically focusing on HVAC, water supply, drainage, and plumbing fixtures, to assess their functionality, operational efficiency, and adherence to applicable mechanical codes. The work is required at the US Embassy in Accra, Ghana, with the place of performance designated as ACCRA and a postal code of 00233, indicating the scope is confined to this federal facility. The inspection must ensure all systems meet current regulatory standards and perform reliably under local environmental and operational conditions. This is a subcontract opportunity under NAICS code 238220, which classifies it as a plumbing, heating, and air-conditioning contractor service. The solicitation was posted on July 27, 2026, with a firm deadline for responses set for September 11, 2026, at 2:00 PM. The contracting agency is the Department of State through the US Embassy Accra, and while no set-aside provisions or point of contact details are provided, the requirement implies a need for qualified technical personnel capable of performing detailed assessments of building systems in an international diplomatic context. All submissions must be completed by the stated deadline to be considered.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Electrical Systems AssessmentThe contract titled Electrical Systems Assessment requires a thorough inspection of all electrical systems at the US Embassy in Accra, Ghana, including wiring, panels, grounding, lighting, and emergency power systems, to verify compliance with both local and international safety standards. The work must ensure the integrity and operational reliability of the embassy’s electrical infrastructure, identifying any deficiencies or hazards that could compromise safety or regulatory adherence. The scope encompasses a comprehensive evaluation to support the continued safe functioning of critical facilities under U.S. government jurisdiction. The solicitation is classified as a subcontract with a NAICS code of 238210, indicating specialization in electrical contracting services. Responses are due by September 11, 2026, and the performance location is confirmed as Accra with a postal code of 00233. The contract is managed by the Department of State through the US Embassy Accra, and potential respondents must be prepared to meet stringent technical, safety, and logistical requirements associated with working at a U.S. diplomatic facility overseas. All work must be conducted in alignment with applicable U.S. and Ghanaian regulations, with an emphasis on durability, security, and minimal disruption to embassy operations.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Structural and Building Envelope InspectionThe contract titled Structural and Building Envelope Inspection mandates a detailed assessment of the structural integrity and building envelope components including roofing, walls, foundations, and exterior cladding at the US Embassy in Accra. The purpose is to detect signs of deterioration, water intrusion, and potential safety hazards as part of an broader facility evaluation, ensuring the structural soundness and long-term viability of the diplomatic compound. Specialized expertise is required to conduct non-invasive and invasive inspections as necessary, with findings to inform remediation planning and prioritize maintenance activities in alignment with federal property standards. Performance is to be conducted in Accra, Ghana, with a zip code of 00233, and the submission of responses is due by September 11, 2026, at 2:00 PM local time. This is a subcontract under NAICS code 541340, which covers engineering services, indicating the need for licensed professionals with experience in building science and structural analysis. The solicitation is issued by the Department of State through the US Embassy in Accra, and while no set-aside preferences are specified, all offerors must demonstrate capability to perform in an international context with strict adherence to U.S. government protocols and quality assurance requirements.

Drafting Services

POSTED

DEADLINE

in about 1 month

Comprehensive Facility Assessment ServicesThe contract requires a full inspection and evaluation of a 16-unit residential compound located in Accra, Ghana, to assess the condition of all major building systems including structural, electrical, mechanical, plumbing, fire suppression, and building envelope components. The objective is to systematically identify deficiencies, document their severity, and develop a comprehensive strategic maintenance plan that prioritizes repairs and long-term upkeep to ensure safety, functionality, and compliance with operational standards. All findings must be thoroughly documented and presented with actionable recommendations tailored to the compound's specific needs and usage patterns. The work is being procured as a subcontract under the US Embassy Accra, operating through the Department of State, with the solicitation posted on July 27, 2026, and responses due by September 11, 2026. The North American Industry Classification System code 541350 indicates this is a professional, scientific, and technical service focused on architectural and engineering activities. The place of performance is explicitly set in Accra, Ghana, with a postal code of 00233, and all deliverables must align with the embassy’s operational and logistical requirements. The contractor is expected to have the technical expertise, local knowledge where applicable, and resources to conduct field inspections and produce a detailed, implementable maintenance strategy within the specified timeframe.

Building Inspection Services

POSTED

DEADLINE

in about 1 month

Facility Assessment ServiceThe U.S. Embassy Accra, under the Department of State, is seeking qualified vendors to provide Facility Assessment Services through solicitation number 19GH1026Q0024, posted on July 27, 2026, with a response deadline of September 11, 2026, at 2:00 PM. This solicitation falls under NAICS code 541350, which corresponds to Architectural Services, and is not subject to any small business set-aside provisions. The work is primarily located in Accra, Greater Accra, Ghana, with the contracting office based in Washington, D.C. Interested parties must submit proposals by the specified deadline to be considered for award. The procurement is managed by the Embassy's Office of Facilities Management, with Franchesca Minikon-Reece as the primary point of contact and Prakah Dickey serving as the secondary contact. Proposals must be submitted via the SAM.gov platform using the provided UI link, and all submissions should align with the technical and administrative requirements outlined in the solicitation. The assessment will evaluate vendors’ ability to conduct comprehensive evaluations of embassy facility infrastructure, including structural, mechanical, electrical, and safety systems, ensuring compliance with U.S. government standards and security protocols. Successful contractors will be expected to deliver detailed reports and actionable recommendations to support the maintenance, modernization, and optimization of embassy facilities in Accra.

Building Inspection Services

POSTED

DEADLINE

in about 1 month