Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!
logo

FIRST AID KIT, GENER

Active
SPE2DS-26-T-6461Federal
AI Contract Overview
Show more

This contract covers the procurement of general purpose first aid kits specifically designed as maritime assault medical kits with force protection features. Each kit includes a black maritime assault bag and a comprehensive set of medical supplies such as chest seal dressings, polycarbonate eye shield, triage resupply pack, combat application tourniquet, combat gauze, rolled gauze, emergency bandages, nasopharyngeal airway kit with lubricant, IV catheter kit, combat casualty reference card, large nitrile gloves, and a rescue hook. All items are marked with lot numbers and manufacture dates, ensuring traceability. The shelf life for these kits is set at 60 months (non-extendable), with delivery required no later than nine months from the date of manufacture. The contract requires packaging that meets commercial standards to protect contents during shipment, including sealed unit containers and suitable exterior shipping containers configured for safe and cost-effective transportation to the destination address aboard the USS Chung Hoon (DDG 93). Marking and labeling must conform to Medical Marking Standard No. 1, superseding MIL-STD-129. The acquisition is regulated by the FDA, and the contractor must supply detailed product information and comply with various technical and quality standards outlined by the Defense Logistics Agency. Delivery is required within 20 days of contract award, with a total quantity of 10 units ordered. Inspection and acceptance of goods will occur at the destination, and packaging must align with environmental and safety regulations for hazardous materials as applicable.

General Info

Procurement of 10 maritime assault medical kits with force protection, delivered within 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency

NAICS

339112 - Surgical and Medical Instrument Manufacturing

View NAICS

Place of Performance

UNIT 100203 BOX 1, FPO, AP, 96662, US

Set-Aside

NONE
Documents(1)

SPE2DS-26-T-6461.pdf

PDF

AI Contract Breakdown
Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline
PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information
Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office Address

US

Contacts

1 contact available

View Contacts

Start a free trial to view contact information.

Start Free Trial
Full Description
Show more
FIRST AID KIT,GENER
FIRST AID KIT, GENERAL PURPOSE
ASSAULT KIT MEDICAL BLACK MARITIME
FORCE PROTECTION
.
UNIT OF ISSUE EACH, EA
.
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM THE DATE OF MANUFACTURE TO THE DATE OF DELIVERY TO THE GOVERNMENT. . CONTENTS: BAG, CCR-MARITIME ASSAULT, BLACK (1 EA); 6510-01-532-8019, DRESSING, SEAL, HYFIN CHEST (2 EA); 6515-01-647-5456, POLYCARBONATE EYE SHIELD (1 EA); 6515-01-624-7148, RESUPPLY PACK, TRIAGE MANAGEMENT SYSTEM (1 EA); 6515-01-521-7976, TOURNIQUET, COMBAT APPLICATION (1 EA); 6510-01-562-3325, COMBAT GAUZE, W/Z FOLD (1 EA); 6510-01-605-2234, GAUZE, S-ROLLED, 4.5" X 4.1 YD (1 EA); 6510-01-558-4114, BANDAGE, EMERGENCY, 6" (1 EA); 6515-01-529-1187, KIT, NASOPHARYNGEAL AIRWAY W/LUBE (1 EA); 6515-01-541-0635, KIT, IV CATHETER, 14 GA BY 3.25" (1 EA); 6515-01-537-4161, CARD, COMBAT CASUALTY REFERENCE (1 EA); KIT, GLOVE BLACK TALON NITRILE, SIZE LARGE (2 EA); AND HOOK, MODEL 7 RESCUE (1 EA). . MARKINGS ON ALL CONTAINERS SHALL INCLUDE THE LOT (CONTROL) NUMBER AND DATE OF MANUFACTURE PREFIXED BY "MFD". . RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
SPE2DS-26-T-6461
SECTION B
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. .
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
NORTH AMERICAN RESCUE, LLC 06ST7 P/N 80-0013
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015762247 0001 EA 10.000
NSN/MATERIAL:6545015294185
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE2DS-26-T-6461
SECTION B
PR: 7015762247 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R23146
USS CHUNG HOON DDG 93
UNIT 100203 BOX 1
FPO AP 96662
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R23146
USS CHUNG HOON DDG 93
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) R231466056CG55
RDD: 777
PROJ: EP5 TP 2
SUPP ADD: YNCG01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A41 DIST: 9B ADV: 2A FC: N7
Need Ship Date:00/00/0000 Original Required Delivery Date:03/06/2026
SPE2DS-26-T-6461 NSN/Part Number: 6545-01-529-4185 Quantity: 10 EA Purchase Request: 7015762247QTY: 10 Delivery: 20 days ADO

Similar Contracts

NAICS: 339112
New
State

IPV Machines

This contract involves the procurement of three units of a specific brand and model of Intermittent Positive Pressure Ventilation (IPV) machines, identified as MFR #K00065-US IPV 1-Airway Clearance devices. Each unit includes a dual gas US oxygen hose, a stand bracket kit, a 15-foot green oxygen hose with a 1/4" fitting, and a 48-inch universal stand with pole, designed to facilitate airway clearance, secretion mobilization, and lung recruitment in patients. The devices feature precise technical specifications, including compact dimensions of about 23.79 cm by 18.31 cm by 17.53 cm, a weight of 1.45 kg, and an operating range favoring typical indoor conditions with storage tolerance to broader temperature and pressure extremes. They operate on wall gas pressures between 47-80 psi with a minimum flow greater than 35 liters per minute, delivering pulses at variable frequencies and amplitudes to ensure effective therapy. Powered by two CR123A batteries, each device offers around 3,250 operational hours under standard conditions and requires annual preventive maintenance. The device includes the Phasitron® 5 with Unified Connector, supplied in cases of ten, which is a critical component ensuring responsiveness and compatibility. The solicitation for these IPV machines is managed by SUNY Westchester Community College, with a submission deadline in late March 2026. The procurement process follows detailed instructions outlined in Schedule A, emphasizing bid compliance with legal and ethical standards, anti-collusion, and equal opportunity policies, while encouraging participation from minority and service-disabled veteran-owned businesses. Pricing, delivery schedules, and certification requirements are clearly defined, with restrictions on bid withdrawals and considerations for tax exemptions. The contract ensures that the supplied equipment meets rigorous technical and operational standards aligned with healthcare requirements in New York, reinforcing both performance reliability and user safety.

SUNY Westchester Community College

POSTED

about 16 hours ago

DEADLINE

in 20 days

View Details
NAICS: 339112
New
Federal

SPECULUM, VAGINAL

The contract concerns the procurement of sterile, medium-sized vaginal speculums, including a specific variant that is clear plastic, LED-illuminated, ratcheting, battery-operated, disposable, and packaged in boxes of ten each. The solicitation, identified by number SPE2DS-26-T-6491, was issued by the Department of Defense’s Medical Supply Chain MD Surg FSF and requires delivery within 20 days of the award date. Bidders must specify the source and part number of the items they offer. The contract references adherence to relevant technical and quality requirements as outlined in the Defense Logistics Agency's Master List, ensuring compliance with established procurement standards. Additional provisions include packaging requirements, removal of government identification from non-accepted supplies, and potential applicability of covered defense information guidelines. The solicitation is open to federal organizations, with a response deadline of March 10, 2026. The contract involves the supply of one box under the National Stock Number 6515-01-725-1388 and is intended for performance at a specified military postal location. The primary point of contact for this solicitation is Brooke Webb, reachable by phone and email for further inquiries.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 21 hours ago

DEADLINE

in 5 days

View Details
NAICS: 339112
New
Federal

ADAPTER, OXYGEN FLOW

The contract covers the supply of oxygen flow adapters designed specifically for ventilator circuits, enabling secure connections between Passy Muir valves and ventilator tubing or other compatible adapters. These adapters are flexible, latex-free, and color-coded purple to correspond with the PMV 2001 model but are also compatible with PMV 2000 and PMV 005 models. They feature a 22mm stretch-to-fit design to ensure a proper seal and are suitable for use with closed suction systems. Each unit is procured individually, with a total quantity of three adapters requested for delivery within 20 days after order. The procurement is managed by the Department of Defense under the Medical Supply Chain MD SURG FSF, with the place of performance designated at Travis Air Force Base. Bidders must specify the source and part number of the items supplied and comply with technical and quality requirements as outlined in the DLA Master List. Additionally, all products must meet the latest medical marking standards, and packaging must follow DLA requirements. The solicitation was posted on March 4, 2026, with a response deadline of March 10, 2026, and is intended to support federal medical equipment needs in ventilator components.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 21 hours ago

DEADLINE

in 5 days

View Details
NAICS: 339112
New
Federal

AIRWAY, NASOPHARYNGE

The contract calls for the supply of nasopharyngeal airways, specifically thin-wall, curved tubes sized at 26 French. These devices are made from soft PVC plastic, disposable, and sterile, packaged in sets of 10 each. The airways have an outer diameter of 8.6 mm and an inner diameter of 6.5 mm, featuring a fixed proximal flange, inner wall serrations, and a beveled tip for ease of insertion and patient comfort. Each package must have a shelf life of 60 months, and no more than nine months can have elapsed from the manufacturing date at the time of delivery to the government. Product labeling requirements include the National Stock Number (NSN), manufacturer and CAGE code, manufacture date, expiration or retest date, and contract or lot number to ensure traceability and compliance. The solicitation, identified by NSN 6515-01-129-5436, requests four packages of 10 airways each, with delivery expected within 20 days after award. The procurement adheres to specific technical and quality standards outlined in DLA’s master list of requirements, including packaging provisions and handling of non-accepted supplies. The contract is managed by the Medical Supply Chain Directorate under the Department of Defense, with performance located at Fort Drum, NY. Interested bidders are required to specify the source and part number of the items offered, with the primary point of contact being James Burke Jr. from DLA, who can be reached via email or phone for further inquiries.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 21 hours ago

DEADLINE

in 5 days

View Details
NAICS: 339112
New
Federal

NEEDLE, INTRAOSSEOUS

The contract covers the supply of sterile intraosseous needle sets designed for medical use, specifically for patients weighing 40 kg (81 lbs) and above. Each needle is 45 mm in length, 15 gauge, and packaged five per box. The sets include indicator lines at 5 mm intervals for insertion depth assessment, a yellow hub, and additional accessories such as five EZ connects, five wristbands, and one directions for use leaflet. These needle sets are compatible with the intraosseous injection gun designated by NSN 6515-01-571-3152. Packaging must meet commercial standards ensuring protection against damage, with sealed unit containers and appropriate exterior shipping containers for safe delivery at the lowest transportation cost. All units must be marked according to Medical Marking Standard No. 1. The items have a non-extendable shelf life of 48 months, categorized as TYPE I (CODE R). The contract specifies technical and quality requirements per DLA Master List standards, incorporates protocols for covered defense information, and requires the removal of government identification from non-accepted supplies. The procurement quantity is six boxes, with delivery expected within 20 days to Fort Drum. The contract is managed under the Department of Defense’s Medical Supply Chain, with a point of contact provided for further communication.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 21 hours ago

DEADLINE

in 5 days

View Details