Top

Government Contracting Advisor / Advocacy Ombudsman Services

Active

Federal

Response Deadline07/31/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

541611 - Administrative Management and General Management Consulting ServicesView NAICS

Place of Performance

Edwards, CA, 93523, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 09:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Provide advisory services related to NASA FAR Supplement Clause 1852.215-84 (Ombudsman), supporting fair treatment in sole-source justifications.

Similar Contracts

Same NAICS industry code

NAICS: 541611

New

DIBBS

Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Small Business Subcontracting Support (Administrative & Compliance)The contract requires support to assist a prime contractor in meeting small business subcontracting plan compliance, reporting obligations, and maintaining all necessary Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement documentation to satisfy evaluation criteria. This administrative and compliance-focused engagement ensures that subcontracting goals are accurately tracked, reported, and aligned with federal requirements, thereby securing favorable evaluations during contract performance reviews. The work will involve ongoing monitoring of subcontractor performance, preparation of required submissions, and adherence to procedural guidelines to maintain compliance throughout the contract lifecycle. The solicitation is classified under NAICS code 541611 and is issued by the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, with a response deadline of August 28, 2026. The type of procurement is designated as a subcontract, indicating the work is part of a larger prime contract effort. No specific set-aside classification or place of performance details are provided, and no point of contact information is listed. The task remains centered entirely on administrative and compliance functions to uphold the integrity of the prime contractor’s small business subcontracting program as mandated by federal regulations.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Regulatory and Compliance SupportThe contract seeks ongoing compliance support to ensure adherence to NIST SP 800-171, DFARS 252.204-7012, and CDTE reporting requirements, with a focus on protecting Controlled Unclassified Information. Key deliverables include the development and maintenance of a System Security Plan and the timely submission of required reports through DIBNet. All activities must align with federal cybersecurity standards for defense industrial base contractors handling sensitive government information. This is a small business set-aside subcontract under the NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 29, 2026, with responses due by August 12, 2026. The work is intended for a total small business contractor, and performance will be conducted under the auspices of the Defense Industrial Base network, where regulatory adherence is critical to securing federal contracts. All support services must be delivered in a manner that sustains continuous compliance and minimizes exposure to data breaches or noncompliance penalties.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Capability Statement Development and Proposal Support

NASA Shared Services Center

POSTED

DEADLINE

Quality Assurance and Inspection Services

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Prohibited Technology Compliance & ReportingThe contract requires the implementation and maintenance of compliance processes to strictly prohibit the use of telecommunications equipment from covered foreign entities as mandated by Section 889 of the National Defense Authorization Act. This includes establishing robust systems to identify, audit, and report on all telecommunications and video surveillance equipment used in performance of the work to ensure no prohibited infrastructure from designated foreign adversaries is present or utilized. The contractor must maintain documented procedures for ongoing monitoring, employee training, and vendor vetting to sustain compliance throughout the contract term. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, with the North American Industry Classification System code 541611 indicating it pertains to management consulting services. The work is to be performed in Tampa, Florida, with a response deadline of August 6, 2026, and was posted on July 29, 2026. The contract is managed by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8, and adherence to Section 889 compliance is critical for contract award and continued performance.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Intellectual Property and Royalty Compliance ReportingThis contract provides legal and administrative support to ensure compliance with federal intellectual property requirements, focusing on patent, copyright, and royalty reporting obligations for entities working under the Department of Energy through Brookhaven National Laboratory. The scope of work involves managing documentation, reporting timelines, and regulatory adherence to meet federal standards for intellectual property generated under federally funded research and development activities. Services must be delivered to meet strict compliance timelines and maintain accurate records to support audits and federal oversight. The contract is classified as a subcontract with a NAICS code of 541611, indicating legal services in the professional, scientific, and technical services sector. It is posted with a response deadline of August 10, 2026, and the place of performance is designated as Upton, New York, with a zip code of 11973. The contracting entity is the Department of Energy’s contractor at Brookhaven National Laboratory, and the work is expected to support ongoing federal obligations tied to intellectual property arising from federally funded projects. All deliverables must align with federal regulations governing IP rights and royalty disclosures.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Technical Documentation and As-Built Reporting

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Privacy Compliance & Documentation (PTA/PIA)

Departmental Operations Acquisitions Division I

POSTED

DEADLINE

Technical Data Package (TDP) Management and Compliance

POSTED

DEADLINE

Technical Documentation & Case Study Development

CDC Office Of Acquisition Services

POSTED

DEADLINE

Section 508 Accessibility Conformance Reporting

CDC Office Of Acquisition Services

POSTED

about 15 hours ago

DEADLINE

in 20 days

View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 541512

New

Federal

Software Licensing Resale and Integration Support

Computer Systems Design Services

POSTED

DEADLINE

ZCOV v1 Perpetual Software Licensing

POSTED

DEADLINE

Circuit Breaker SupplyThe contract calls for the supply of 118 circuit breakers that must be of a specified brand or an equivalent alternative, designed for seamless integration into existing electrical systems at the Stennis Space Center. The delivery terms are FOB destination, meaning the supplier is responsible for all transportation costs and risks until the items reach the specified location. The opportunity is structured as a subcontract under a Small Business Set Aside, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 335312, which pertains to the manufacturing of electrical lighting and wiring equipment. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 5, 2026, at 3:00 PM Eastern Time. The contracting entity is the NASA Shared Services Center, acting on behalf of the National Aeronautics and Space Administration, indicating this procurement supports federal aerospace infrastructure needs.

Motor and Generator Manufacturing

POSTED

DEADLINE

Electrical Receptacle SupplyNASA Shared Services Center is seeking a small business to supply 118 industrial-grade electrical receptacles, specified as brand name or equal, for use at NASA Stennis Space Center under a Small Business Set Aside contract. The delivery terms are FOB destination, meaning the vendor assumes responsibility for shipping and delivery costs until the goods reach the designated location. The solicitation is categorized under NAICS code 335313, which corresponds to the manufacturing of electrical lighting and wiring equipment. The opportunity was posted on July 29, 2026, with a response deadline of August 5, 2026, at 3:00 PM Eastern Time. This is a subcontract opportunity, and all submissions must meet the small business eligibility requirements as defined by the Small Business Administration. The performance location is at NASA Stennis Space Center, though specific address details are not provided in the posting.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Liquidtight Flexible Conduit SupplyThe contract entails the supply of 5,900 feet of liquidtight flexible conduit that must fully comply with applicable electrical codes and technical specifications, with delivery terms set at FOB destination, meaning the seller assumes responsibility for transportation costs and risks until the goods reach the specified delivery point. The requirement is part of a Small Business Set Aside under the SBA, restricted exclusively to qualified small businesses, and is classified under NAICS code 332312 which pertains to the manufacturing of electrical and wiring fixtures. The solicitation was posted on July 29, 2026, with responses due by August 5, 2026, at 3:00 PM, indicating a tight turnaround for submissions. The contracting activity is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, though the specific place of performance and point of contact details are not provided in the data. The contract is structured as a subcontract, and interested parties must access the official SAM.gov portal via the provided link to submit proposals or obtain further procedural guidance.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

THHN Stranded Copper Wire SupplyThe contract specifies the supply of 24,000 feet of #10 THHN stranded copper wire, evenly distributed in four colors—6,000 feet each of black, red, white, and green—with the requirement that the product be of a specified brand name or equal quality. Delivery is to be made FOB destination to the Stennis Space Center, meaning the vendor is responsible for all transportation costs and risks until the goods arrive at the designated location. The solicitation is structured as a subcontract under a Small Business Set Aside, designated as Total, ensuring the opportunity is reserved exclusively for small businesses. The North American Industry Classification System code 335930 identifies the category as other electrical equipment and component manufacturing, aligning the procurement with industry standards for electrical wiring products. The contract was posted on July 29, 2026, with a firm response deadline of August 5, 2026, at 3:00 PM, providing potential vendors a seven-day window to submit proposals. The contracting agency is the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, indicating the wire will support federal space program infrastructure, likely for electrical installation or maintenance activities at the Stennis facility. While specific address details for the office or place of performance are not provided, the requirement to deliver to Stennis Space Center defines the operational endpoint. The procurement remains active under the SAM.gov portal, and vendors must ensure compliance with all technical, commercial, and small business eligibility criteria to be considered.

POSTED

DEADLINE

Final Assembly, Testing & Vacuum CertificationThe contract involves the final assembly, testing, and vacuum certification of rotary feedthrough components, with a focus on integration and performance validation under vacuum conditions. Key activities include leak testing to ensure system integrity and encoder calibration to guarantee precise rotational feedback, both critical for operational reliability in space environments. This work is part of a subcontract under NASA’s Shared Services Center, aligned with NAICS code 333912 for other commercial and industrial machinery manufacturing, and must be completed by the response deadline of August 3, 2026. The performance is expected to meet stringent vacuum and precision standards required for NASA missions, though specific locations and point of contact details are not provided.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

Precision Machining of Rotary Feedthrough ComponentsThe contract calls for the precision CNC machining of high-precision stainless steel components including housings, shafts, and flanges, specifically designed for use in vacuum-compatible environments. These parts must meet stringent dimensional tolerances and surface finish requirements to ensure performance under extreme operational conditions, typical of aerospace and space exploration applications. The work requires advanced machining capabilities, strict quality control, and adherence to material specifications that guarantee integrity and reliability in high-vacuum and high-stress settings. This is a subcontract solicitation issued by the NASA Shared Services Center under the National Aeronautics and Space Administration, with a NAICS code of 332721 for Metal Foundries. The opportunity was posted on July 29, 2026, and responses are due by August 3, 2026, at 2:00 PM. The place of performance and detailed address information are not specified, but the work is intended to support NASA’s mission-critical systems requiring ultra-reliable components. There is no set-aside designation, and the contract is open to eligible subcontractors capable of meeting the technical and regulatory demands of space-grade manufacturing.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Ultra-High Vacuum (UHV) Sealing & Materials SupplyThe contract calls for the supply of vacuum-compatible metal seals, gaskets, and non-outgassing materials specifically engineered for operation in ultra-high vacuum environments at or below 10⁻⁷ Torr. These components must meet stringent performance criteria to ensure structural integrity, thermal stability, and minimal contamination under extreme vacuum conditions, making them essential for critical aerospace and scientific instrumentation systems. The materials must be free of volatile compounds that could compromise vacuum integrity or interfere with sensitive experiments, and all items are subject to rigorous quality assurance standards consistent with NASA's mission-critical requirements. The solicitation is issued as a subcontract under the NAICS code 332996 for Other Fabricated Metal Product Manufacturing by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Responses are due by August 3, 2026, and the opportunity was posted on July 29, 2026. The place of performance and point of contact details are not specified, but the delivery and compliance must align with NASA’s operational needs across its mission facilities. All vendors are expected to demonstrate proven experience in supplying UHV-grade components and adherence to cleanroom and contamination control protocols.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Precision Motor Integration & Encoder Feedback SystemsThe contract seeks the supply and integration of compact, high-torque motors equipped with encoder-based position feedback systems for use in vacuum-compatible assemblies, specifically for both inner and outer shafts. These motors must meet stringent performance criteria to ensure precise motion control in extreme environments, with a focus on reliability, thermal stability, and electromagnetic compatibility under vacuum conditions. The integration must support seamless alignment and synchronization between shafts, with feedback systems delivering real-time positional data to enable closed-loop control essential for mission-critical applications. The solicitation is issued as a subcontract under NASAs Shared Services Center, with a NAICS code of 334516 indicating classification within the instrumentation and industrial control manufacturing sector. Responses are due by August 3, 2026, and the work is expected to support NASA space systems requiring high-precision actuation in non-atmospheric conditions. While no specific place of performance or set-aside details are provided, bidders must demonstrate technical expertise in vacuum-compatible motor design, encoder integration, and proven experience in aerospace or high-reliability applications. All proposals must align with NASA’s standards for quality, performance, and environmental resilience without compromising system longevity or operational accuracy.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

High-Vacuum Rotary Feedthrough Design & EngineeringThe contract calls for precision mechanical design of dual concentric rotary feedthroughs engineered for ultra-high vacuum environments, incorporating vacuum sealing, shaft isolation, and integrated motor systems to ensure reliable operation under extreme conditions. The design must maintain structural integrity and rotational precision while preventing contaminants from entering the vacuum chamber and isolating mechanical drivetrain components from sensitive internal systems. The work is classified as a subcontract under NAICS code 541330 for engineering services and is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The solicitation was posted on July 29, 2026, with a firm response deadline of August 3, 2026. The performance location and specific point of contact are not detailed, but the technical requirements demand advanced expertise in vacuum-compatible materials, dynamic sealing technologies, and electromechanical integration for space-grade applications.

POSTED

DEADLINE