Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Handheld XRF Analyzer Supply

Active

Federal

Response Deadline07/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of a single Niton XL5 Plus Handheld XRF Analyzer or an approved equivalent device designed for non-destructive elemental analysis in both field and laboratory settings. The equipment must meet specified performance standards to ensure accurate and reliable material identification without sample damage, supporting applications across environmental, industrial, and defense-related environments. Delivery is expected to meet the technical and operational requirements necessary for use in diverse conditions, with the device intended for consistent, on-site analysis capabilities. This is a subcontract issued under a Total Small Business Set-Aside, designated by the North American Industry Classification System code 333318, exclusively for small businesses as defined by the SBA. The solicitation was posted on July 28, 2026, with a deadline for responses set for July 31, 2026, at 7:00 PM. The place of performance is tied to a location with a ZIP code of 73145, indicating the primary operational region for equipment use. The contracting authority is the Department of Defense, specifically under the FA8126 AFSC PZIMB office, and the contract remains under the federal acquisition regulatory framework governing small business participation and defense procurement protocols.

General Info

Procurement of a handheld XRF analyzer for DoD use by a small business in ZIP 73145, under federal acquisition rules.

Agency

Department Of Defense → FA8126 Afsc PzimbView Agency

NAICS

333318 - Other Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

OK, 73145, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 07:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8126 Afsc Pzimb

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8126 Afsc Pzimb

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of one Niton XL5 Plus Handheld XRF Analyzer or approved equal for non-destructive elemental analysis in field and laboratory environments.

Similar Contracts

Same NAICS industry code

Supply of Bedding Dispensing Station / Animal Cage Filling Station (OEM or Authorized Distributor)The contract requires the supply and delivery of one new, factory-original Bedding Dispensing Station / Animal Cage Filling Station identified by Labodia Part Number 112-4323 or an equivalent model that meets identical specifications. If the equipment is sourced through a distributor rather than directly from the original equipment manufacturer, an official OEM authorization letter must be provided to verify authenticity and compliance. The equipment is intended for use in a laboratory or animal care facility and must be brand new, with no used, refurbished, or second-hand units accepted. The solicitation is structured as a subcontract under NAICS code 333318, which pertains to other commercial and service industry machinery manufacturing, and is managed by the Department of Veterans Affairs through its 245-NETWORK Contract Office 5. Responses must be submitted by August 7, 2026, at 4:00 p.m., with the opportunity posted on July 28, 2026. The place of performance and specific delivery location are not defined in the provided data, and no point of contact information is listed.

245-NETWORK Contract Office 5 (36C245)

POSTED

about 23 hours ago

DEADLINE

Side B Blowers (Specialty Ventilation Components)The contract seeks the supply of auxiliary or redundant ventilation units, known as Side B blowers, specifically designed for high-containment rodent housing environments and fully compatible with Innovative V3.5 systems. These components are critical for maintaining precise airflow and environmental control in biosafety-sensitive laboratory settings, ensuring the integrity of rodent research operations. The requirement emphasizes technical compatibility and reliability, as the blowers serve as essential fail-safes in ventilation systems where even minor disruptions could compromise containment or animal welfare. The solicitation is categorized as a subcontract under NAICS code 333318, indicating it involves the manufacturing of specialty HVAC and ventilating equipment. It is managed by the Network Contract Office 23 under the Department of Veterans Affairs, with performance required at a location in Minneapolis, Minnesota, zip code 55417. The opportunity was posted on July 27, 2026, and responses are due by August 6, 2026, at 5:00 PM Eastern Time. Vendors must demonstrate technical capability to deliver units that meet exacting performance specifications for high-containment use, though no set-aside provisions are specified for small or niche businesses.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Supply of Gas Chromatograph Single Quadrupole Mass Spectrometer (GC-MS) SystemThe contract pertains to the supply of a complete bench-top gas chromatograph-mass spectrometer (GC-MS) system designed for advanced analytical applications, encompassing a mass spectrometer, gas chromatograph, autosampler, pyrolyzer, SPME device, and cryo-trap, all integrated to meet stringent performance criteria. The equipment must be brand new and fully functional, with no used or refurbished components permitted, ensuring compliance with exact technical specifications required for precise and reliable laboratory analysis. The system is intended for deployment at a facility in Fargo, North Dakota, with delivery and installation subject to strict timelines and quality assurance protocols to maintain operational readiness. The opportunity is classified as a subcontract under NAICS code 333318 and was posted on July 27, 2026, with a response deadline of August 7, 2026, by 9:00 PM eastern time. The contracting entity is the USDA Agricultural Research Service, specifically the Agricultural Management and Production Division, and the award will be made to a qualified vendor capable of delivering a turnkey solution that aligns with federal procurement standards. All technical documentation, calibration protocols, and training materials must accompany the system, and the vendor is expected to provide adequate support to ensure seamless integration into existing laboratory workflows.

USDA Ars Afm Apd

POSTED

DEADLINE

Supply of Dual-Use Benchtop Wirebond-Pull Tester with A-1 Tweezer FeatureThe contract seeks the procurement and delivery of a new, non-refurbished West Bond 70PTE E-Series wirebond-pull tester equipped with an A-1 Tweezer attachment, specifically designed to integrate seamlessly with existing West Bond systems utilized in the assembly of NASA’s Athena mission hardware. The equipment must be factory fresh and fully compatible with current instrumentation to ensure consistent, reliable performance in high-precision bonding validation tasks critical to mission integrity. Delivery is required to meet stringent technical specifications and operational standards aligned with aerospace quality benchmarks. Performance of this contract is designated for Boulder, Colorado, with a response deadline of August 6, 2026, and the solicitation was posted on July 27, 2026. This action falls under the NAICS code 333318, categorizing it as a subcontract for other manufacturing machinery. Although the contracting agency is listed as the Department of Commerce, the end-user context clearly ties the equipment to NASA’s Athena mission, indicating interagency coordination for specialized hardware support. There is no set-aside designation, and the opportunity is open to qualified industrial suppliers capable of meeting the technical, delivery, and compatibility requirements without refurbishment or reconditioning.

Department Of Commerce

POSTED

DEADLINE

Precision Motion Control Equipment Supply & IntegrationThe contract requires the supply, delivery, installation, and performance verification of a high-precision Empyrean Goniometer Motor designed for X-ray diffraction and advanced materials analysis applications. The equipment must be fully integrated into existing laboratory systems and undergo rigorous calibration to ensure operational accuracy and reliability in a defense-related research environment. Delivery and installation are to occur at the designated performance location in Coffeyville, Oklahoma, with the vendor responsible for ensuring seamless compatibility with current infrastructure and compliance with all technical specifications for precision motion control. The subcontract, classified under NAICS code 333318 for other commercial and industrial machinery manufacturing, is issued by the Department of Defense through the FA8126 Afsc Pzimb office. Proposals must be submitted by August 7, 2026, and the selected contractor will be expected to deliver a turnkey solution that includes not only hardware but also thorough documentation, system verification testing, and technical support to confirm performance metrics meet stringent requirements for defense and scientific applications. All work must be completed and validated prior to final acceptance at the specified site.

FA8126 Afsc Pzimb

POSTED

DEADLINE

Amalgam Separator Supply & Environmental ComplianceThe contract seeks the supply of external amalgam separators that meet federal environmental regulations for managing dental waste, ensuring compliance with standards designed to prevent mercury and other hazardous materials from entering wastewater systems. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 333318 indicating the classification for other commercial and service industry machinery manufacturing. Performance of the contract is required to occur at a location with a zip code of 84020, though specific city or state details are not provided. The solicitation was posted on July 27, 2026, with a response deadline set for August 26, 2026, at 4:00 PM. The contracting activity is tied to the Department of Defense through the W7N3 Uspfo Activity Ut Arng, indicating this requirement supports a federal defense facility or operation. All submitted proposals must align with federal environmental mandates and demonstrate capability to deliver compliant amalgam separators under the set-aside restrictions.

W7N3 Uspfo Activity Ut Arng

POSTED

DEADLINE

Commercial Food Processors SupplyThe contract is for the supply of two Robot Coupe CL50E commercial food processors to be delivered to the JBMHH DFAC facility located in Fort Myer, Virginia, with a ZIP code of 22211. This is a subcontract under a Total Small Business Set-Aside classification, meaning only small businesses are eligible to bid, as defined by the SBA and FAR 19.5. The NAICS code 333318 identifies the industry as commercial food service equipment manufacturing, aligning the procurement with specialized appliance production. The opportunity was posted on July 27, 2026, with a response deadline of August 6, 2026, at 4:00 PM, providing interested vendors a limited window to submit proposals. The procuring agency is the Department of Defense through its W6QM Micc-Ft Belvoir office, indicating this purchase supports military dining facility operations. All items must meet commercial-grade standards to ensure reliable performance in a high-volume food service environment.

W6QM Micc-Ft Belvoir

POSTED

DEADLINE

Autoclave Steam Sterilizer Supply and ManufacturingThe contract involves the supply and manufacturing of a horizontal-loading steam autoclave sterilizer built from 316L stainless steel to meet stringent sterilization requirements in laboratory or healthcare environments. The unit must operate on 208V 3-phase power and incorporate advanced energy and water-saving technologies to reduce environmental impact and operational costs. It will feature intuitive touch-screen controls for ease of use and comprehensive fail-safe safety mechanisms to ensure operator protection and consistent performance under demanding conditions. The equipment is intended for use in a government facility under the jurisdiction of the Department of Agriculture and Agri-Food, Government of Canada, and must comply with all technical specifications outlined in the solicitation. The contract is classified as a subcontract with a NAICS code of 333318, indicating it falls under the category of other commercial and service industry machinery manufacturing. The solicitation was posted on July 27, 2026, with a response deadline of September 2, 2026, allowing prospective vendors sufficient time to prepare proposals. The place of performance and point of contact details are not specified, suggesting the final destination and coordination will be determined after award. All submissions must be made through the Canada Buys platform using the provided tender notice link, and the procurement is not subject to any specific set-aside programs.

Department of Agriculture and Agri-Food

POSTED

DEADLINE

in about 1 month

Barcoding and Marking ServicesThe contract requires the application of MIL-STD-129 compliant barcoding and marking services to ensure proper identification and traceability of containers, specifically utilizing 2D Data Matrix codes and specialized marking codes as mandated by military standards. The work involves precise labeling procedures to support logistics, inventory management, and supply chain operations within Department of Defense systems, with all markings required to meet strict durability and readability specifications for use in harsh environments. The services are to be performed at the location in Columbus with a ZIP code of 43213, aligning with defense logistics requirements. This is a subcontract opportunity under NAICS code 333318, with a response deadline of August 6, 2026, and was posted on July 26, 2026, by the Active Devices Division of the Department of Defense. Bidders must be prepared to deliver fully compliant labeling solutions that integrate seamlessly into existing military supply chain infrastructure, with no set-aside provisions indicated. The solicitation is managed through the DIBBS platform, and contractors are expected to have proven experience in military-grade marking applications and adherence to federal standards for barcode implementation.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

STAND, VEHICLE SUPPOThis contract is a Total Small Business Set-aside indefinite-delivery contract issued by the Department of Defense under solicitation SPE7L3-26-U-0645 for the supply of STAND, VEHICLE SUPPO with NSN 4910002518013. The estimated annual quantity is 157 PR, with a guaranteed minimum of 23 PR and a maximum contract value of $350,000, though no unit pricing is provided in the solicitation. Delivery must occur FOB Origin within 83 days of order issuance, with inspection and acceptance taking place at the destination point within the contiguous United States. All supplies must conform to the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951, and packaging must follow RP001 for palletization and MIL-STD-129 for labeling, marking, and barcoding. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval unless explicitly authorized by the specification. Contractors must comply with cybersecurity requirements under NIST SP 800-171, submit Safety Data Sheets per hazard communication standards, and ensure all shipments use U.S.-flag vessels for ocean transport unless a waiver is granted. Electronic submission through the DLA-BSM Internet Bid Board System is mandatory, with proposals due by August 10, 2026. Contract administration requires invoicing exclusively through Wide Area WorkFlow, and contractors must affirm small business status via SAM.gov, disclose UEI and CAGE codes for all relevant entities, and comply with anti-trafficking, employment eligibility, and whistleblower rights provisions. No contract options, key personnel requirements, or security clearances are included.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Military Item Marking and UID ComplianceThis contract requires the application of permanent, machine-readable unique item identification (UID) markings using data matrix symbols compliant with MIL-STD-130, specifically employing ECC200 encoding to ensure durability and readability in demanding environments. The markings must include AI/DI/TEI data elements to correctly encode item-specific information such as manufacturer, part number, serial number, and lot or batch codes, adhering strictly to DoD UID mandates. All markings must undergo verification to confirm compliance with readability, contrast, size, and symbol structure requirements outlined in the standard. The solicitation is issued as a subcontract under a Total Small Business Set-Aside, limiting eligibility to small business concerns as defined by the SBA, with the NAICS code 333318 indicating the work pertains to other commercial and service industry machinery manufacturing. The contract was posted on July 24, 2026, with responses due by July 29, 2026. The awarding agency is the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and performance is expected under the terms of the procurement managed through the DIBBS system, though the place of performance and point of contact details are not specified.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 6 hours

Equipment Procurement and Installation for Medical FacilitiesThe contract pertains to the procurement, delivery, and installation of specialized medical and facility equipment essential for operational readiness in defense medical environments, including full integration of HVAC systems and medical gas infrastructure. All equipment must be installed in compliance with stringent technical and safety standards, followed by comprehensive commissioning to ensure system functionality and regulatory adherence. The contractor is required to deliver complete operation and maintenance documentation to support long-term facility performance and troubleshooting capabilities. This subcontract is issued under the NAICS code 333318, aligning with medical equipment manufacturing and installation services, and is managed by the Department of Defense through the W2V6 USA Engineering Support Center in Huntsville. Responses are due by August 3, 2026, with no set-aside provisions designated, making it open to all qualified bidders regardless of business size or status.

W2V6 USA Engineering Spt Ctr Huntsvil

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8126 Afsc Pzimb

Same awarding agency

Small Business / HUBZone Participation OpportunityThis contract opportunity is designed to support small businesses and HUBZone-certified firms by allowing them to participate as subcontractors in a Department of Defense initiative under a Total Small Business Set-Aside. While no formal subcontracting plan is mandated, the award inherently prioritizes small business involvement to meet socioeconomic objectives outlined by the SBA. The NAICS code 811211 indicates the work relates to other personal services, likely including maintenance, repair, or technical support services. The opportunity is open for a brief window, with responses due by July 31, 2026, and the place of performance is located in Oklahoma City, Oklahoma, with a zip code of 73145. The contracting activity is listed under FA8126 AFSC PZIMB, and while no point of contact is provided, interested parties can access further details through the SAM.gov portal linked in the posting.

Consumer Electronics Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

Supply Chain Security and Representations ComplianceThis contract requires full compliance with critical supply chain security regulations, including DFARS 252.204-7016 for cyber information security, the prohibition on sourcing from the Xinjiang region under 52.225-7059, and the mandatory security representations outlined in 52.240-90. The subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, ensuring only qualified small enterprises may respond. The work is tied to the NAICS code 541611, indicating it involves management, scientific, and technical consulting services focused on compliance and security advisory functions. The place of performance is listed with a zip code of 73145, though specific city or state details are not provided, and the contracting office falls under the Department of Defense, specifically FA8126 Afsc Pzimb. Responses must be submitted by July 31, 2026, at 7:00 PM, following the posted date of July 28, 2026.

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

Cybersecurity Compliance and NIST SP 800-171 AssessmentThe contract requires comprehensive cybersecurity compliance support aligned with NIST SP 800-171 for an XRF analyzer that handles controlled unclassified information. This includes the development of a System Security Plan and the execution of an assessment to score compliance with all 110 security requirements outlined in the NIST framework. The work is structured as a subcontract under a Total Small Business Set-Aside, ensuring eligibility is restricted to small businesses as defined by the SBA. The NAICS code 541512 indicates the scope falls under computer systems design and related services, emphasizing technical and compliance expertise. Performance is expected to occur at a location with a ZIP code of 73145, and the contract was posted on July 28, 2026, with a strict response deadline of July 31, 2026. The contracting agency is the Department of Defense, specifically identified as FA8126 Afsc Pzimb, underscoring the defense sector’s need for secure data handling in technical equipment.

Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

Technical Documentation and Compliance SupportThe contract pertains to the preparation and submission of technical documentation, conformance statements, and regulatory compliance reports required for delivery under U.S. Department of Defense standards, including adherence to WAWF, UID, and MIL-STD-129 labeling requirements. This effort ensures that all deliverables meet federal military specifications for traceability, identification, and documentation integrity, supporting seamless integration into defense logistics systems. The work is critical for maintaining compliance with federal procurement regulations and ensuring that equipment and components are properly labeled and documented for accountability and readiness purposes. This is a small business set-aside subcontract under NAICS code 541330, exclusively available to small businesses as defined by the SBA, with a response deadline of July 31, 2026, at 7:00 PM. The solicitation originates from the Air Force Sustainment Center under the agency designation FA8126 Afsc Pzimb, with performance required at a location in Oklahoma with ZIP code 73145. No point of contact is listed, and all submissions must be made through the designated SAM.gov portal prior to the deadline to be considered eligible.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Niton XL5 Plus or Equal Handheld XRF AnalyzerThe Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, is seeking to award a Firm-Fixed-Price contract to a small business for the acquisition of a Niton XL5 Plus or equal handheld XRF analyzer. This procurement is designated as a Total Small Business Set-Aside under NAICS code 334516, meaning only businesses certified as small concerns in this classification through SAM.gov are eligible to respond. Proposals must be submitted by the deadline of July 31, 2026, at 7:00 PM ET, and all responsible sources are invited to provide capability statements and technical proposals for consideration. The contract will be awarded based on responsiveness, capability, and compliance with the specified requirements outlined in the item description. The procurement is managed by the Department of Defense through the FA8126 AFSC/PZIMB office, with the place of performance set at Tinker Air Force Base in Oklahoma, zip code 73145. Point of contact for inquiries is Alicia McGill at alicia.mcgill@us.af.mil, with Claude J. Boggs, Jr. available as a secondary contact at 405-739-3317. The solicitation number is FA812626Q0056, posted on July 28, 2026, and all submissions must align with the Brand Name or Equal provision, allowing for equivalent products that meet or exceed the stated performance specifications. Proposals must be submitted through the SAM.gov portal linked in the solicitation details.

Analytical Laboratory Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Replacement Parts & Long-Term Maintenance SupportThe contract seeks a supplier to provide ongoing replacement parts, spares, and consumables for the goniometer motor system, ensuring uninterrupted operational capability. In addition to part supply, the agreement includes the potential for preventive maintenance and repair services, emphasizing long-term support to sustain system reliability. The procurement is structured as a subcontract under NAICS code 423490, targeting vendors capable of delivering timely, compatible, and high-quality components alongside technical support. Performance is required at Coffeyville, OK 73145, with responses due by August 7, 2026. The contract is managed by the Department of Defense through the FA8126 AFSC PZIMB office, indicating a defense-related application requiring strict adherence to technical and logistics standards.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Cybersecurity & CUI Compliance SupportThe contract seeks cybersecurity compliance services aligned with DFARS 252.204-7012 to ensure proper protection of Controlled Unclassified Information (CUI) across covered contractor information systems. Services include conducting comprehensive assessments against NIST SP 800-171 requirements, developing and implementing Systems Security Plans and Plans of Action and Milestones, and establishing robust cyber incident reporting procedures to meet federal standards. The work supports a Department of Defense subcontract under the NAICS code 541512, with performance expected to take place in Coffeyville, Oklahoma, at a zip code of 73145. The solicitation was posted on July 27, 2026, and responses are due by August 7, 2026, at 5:00 PM Eastern Time. The contract is structured as a subcontract and does not specify any set-aside status or small business preferences, indicating it is open to any qualified vendor capable of fulfilling the cybersecurity compliance scope.

Computer Systems Design Services

POSTED

DEADLINE

Technical Installation & Commissioning ServicesThe contract requires technical services for the installation, alignment, calibration, and performance verification of a goniometer motor, to be performed either on-site at Coffeyville, Oklahoma, or remotely as needed. The scope includes system diagnostics, software configuration, and comprehensive user training to ensure operational proficiency. All work must meet defined technical standards and result in a fully functional and validated system ready for end-user deployment. The services are being procured as a subcontract under the Department of Defense, with the task assigned to FA8126 Afsc Pzimb. The solicitation was posted on July 27, 2026, and responses are due by August 7, 2026, with the North American Industry Classification System code 811212 indicating repair and maintenance services for industrial machinery. Performance is mandated at the specified location in Coffeyville, with no provision for other locations unless otherwise authorized.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Technical Documentation and Service ReportingThe contract titled Technical Documentation and Service Reporting requires the timely generation and submission of formal service reports within five business days following each maintenance event. These reports must include detailed records of labor performed, parts used, performance data collected, and a technician sign-off to verify completion and accuracy. The requirement emphasizes consistency and accountability in documenting service activities, ensuring that all operational and maintenance actions are formally recorded and traceable. Compliance with this reporting standard is critical to maintaining service integrity and meeting contractual obligations. This subcontract is associated with the NAICS code 541690 and falls under the Department of Defense, specifically managed by FA8126 Afsc Pzimb. The place of performance is designated as S Coffeyville, OK with a zip code of 73145. The solicitation was posted on July 27, 2026, with a response deadline of August 7, 2026 at 5:00 PM. Although the solicitation number and point of contact are not provided, the contract is accessible via the SAM.gov portal for further details and submission. No set-aside type is specified, indicating it is open to general competition among eligible subcontractors.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Replacement Parts and Factory-Certified ComponentsThe contract requires the supply of new or factory-certified refurbished parts specifically for Oxford EBSD, EDS, and WDS systems, including critical components such as detector heads, processors, cabling, and software modules. All provided parts must come with full traceability and be backed by a comprehensive warranty to ensure reliability and performance in demanding analytical environments. The scope emphasizes strict adherence to quality standards, ensuring that each component meets original equipment manufacturer specifications and is suitable for integration into existing systems without compromise. This subcontract is issued under the NAICS code 423690 and is managed by the Department of Defense through the FA8126 Afsc Pzimb office. The place of performance is designated as Coffeyville, Oklahoma, with a zip code of 73145. Interested parties must submit responses by the deadline of August 7, 2026, at 5:00 PM local time, following the solicitation posted on July 27, 2026. There is no set-aside designation specified, and the contract is open to qualified suppliers capable of meeting the technical and warranty requirements outlined.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

On-Demand Remedial Maintenance and Emergency RepairsThe contract encompasses unlimited on-site remedial maintenance for Oxford detectors, ensuring immediate technical support with a guaranteed 72-hour response time for all service requests. This includes comprehensive diagnostics, component replacement, and full system recovery to restore operational functionality without limitation on the number of interventions. The work is to be performed at the specified location in Coffeyville, Oklahoma, with zip code 73145, and is structured as a subcontract under the Department of Defense’s FA8126 Afsc Pzimb agency. The solicitation was posted on July 27, 2026, with a firm deadline for responses on August 7, 2026, at 5:00 PM, aligning with the NAICS code 811212 which classifies it under appliance and electrical repair and maintenance services. All maintenance activities must adhere to the required response windows and technical standards, ensuring minimal downtime and sustained operational readiness.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE