Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance & Labeling

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Hazardous Materials Compliance & Labeling requires strict adherence to OSHA HAZCOM standards and DFARS requirements for the identification, handling, and labeling of hazardous components. All applicable hazard warning labels must be correctly applied in accordance with 29 CFR 1910.1200 to ensure regulatory compliance across all handling and storage procedures. The work is structured as a subcontract under NAICS code 541690 and is managed by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and performance is expected to occur at an unspecified location under the jurisdiction of the contracting agency. Proper documentation and labeling practices are critical to meet federal safety and procurement mandates.

General Info

Comply with OSHA HAZCOM and DFARS for hazardous materials labeling under DoD subcontract.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identification, handling, and labeling of hazardous components in compliance with OSHA HAZCOM and DFARS requirements, including application of hazard warning labels per 29 CFR 1910.1200.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive compliance with OSHA and DFARS regulations for the handling, packaging, labeling, and documentation of hazardous materials. This includes the accurate preparation of Safety Data Sheets and the proper application of hazard warning labels to ensure all materials meet federal safety and defense standards. The work is critical to supporting military operations and must adhere to strict regulatory frameworks governing the transport and storage of dangerous goods. The solicitation is structured as a subcontract under NAICS code 541690, with a response deadline of August 20, 2026, and performance centered in Norfolk, Virginia, at the ZIP code 23511. The contracting entity is the ACTIVE DEVICES DIVISION within the Department of Defense, emphasizing the defense-related nature of the requirements. All deliverables must be executed to maintain regulatory compliance and support the integrity of defense supply chains, with no set-aside designation specified for small or specialized businesses.

ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires comprehensive hazard communication support for materials used in manufacturing and packaging, specifically focused on preparing Material Safety Data Sheets and hazard warning labels that fully comply with OSHA’s 29 CFR 1910.1200 standard. This work is critical to ensuring regulatory adherence and workplace safety, with all documentation must accurately reflect the chemical identities, hazards, and safety precautions associated with the materials involved. The contractor must possess the expertise to interpret complex chemical data and translate it into clear, compliant documentation that meets federal requirements for employee notification and safe handling. This subcontract is issued under the NAICS code 541690 for other scientific and technical consulting services and is managed by the Department of Defense through LSO Combat Vehicles and Armament. The solicitation was posted on August 9, 2026, with a response deadline of August 24, 2026, and performances may occur at multiple locations without specified geographic restrictions. While no set-aside type or point of contact is provided, interested parties must respond through the DIBBS portal at the provided link, ensuring all submissions align with the mandated compliance standards and are submitted prior to the deadline.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA Hazardous Communications Standard and DFARS clause 252.223-7001 for the proper labeling, documentation, and management of hazardous materials. All hazardous substances must be accurately labeled in accordance with GHS standards, and complete Safety Data Sheets must be prepared, maintained, and submitted as required. The work involves ensuring that all material handling, storage, and transportation practices meet federal safety and defense acquisition regulations, with a focus on transparency, traceability, and regulatory adherence. Failure to meet these requirements may result in non-compliance penalties or contract termination. Performance is to be carried out at the designated location in Texarkana, Texas, with a response deadline of August 20, 2026. This is a subcontract under NAICS code 541690, indicating it relates to other scientific and technical consulting services. The contracting entity operates under the Department of Defense, specifically the Land Supplier Operations Vehicle Support division, and the work is governed by federal defense supply chain protocols. The contractor must be prepared to demonstrate continuous compliance throughout the contract term and provide all necessary documentation upon request.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract involves the preparation and ongoing management of Safety Data Sheets for defense-qualified connectors, ensuring full compliance with federal hazardous materials regulations. This subcontract requires precise documentation and continuous monitoring to meet Department of Defense safety and regulatory standards, specifically for connectors used in defense applications. The work must be executed in alignment with applicable federal, state, and industry guidelines to maintain the integrity and safety of materials handling, storage, and transportation. Performance is centered at Cherry Point, North Carolina, with a strict submission deadline of August 20, 2026, following a posting date of August 9, 2026. The contract falls under NAICS code 541690, which designates other scientific and technical consulting services, indicating the need for specialized expertise in regulatory compliance and chemical safety documentation. As a subcontract within the defense supply chain, adherence to strict compliance protocols is non-negotiable, and the selected provider must demonstrate a proven ability to manage complex hazardous material documentation under defense contract requirements.

ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the preparation of hazard warning labels and Safety Data Sheets (SDS) aligned with OSHA’s Hazard Communication Standard and MIL-STD-129 specifications for all materials utilized in production or packaging processes. This subcontract is issued by the ASC Commodities Division under the Department of Defense and is targeted at ensuring consistent, accurate, and military-standardized documentation and labeling of hazardous substances. Performance of the work is mandated to occur at Camp Lejeune, North Carolina, with a strict deadline for responses by August 17, 2026, and the solicitation was posted on August 9, 2026. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, emphasizing the specialized nature of compliance documentation development. All deliverables must meet federal safety and labeling requirements to support safe handling, storage, and transportation of materials within military supply chains.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets for the radiator assembly if it contains or is shipped with hazardous materials, ensuring full regulatory compliance with transportation and workplace safety standards. This work is critical for the safe handling, storage, and use of the component throughout its lifecycle and must adhere to national and international chemical safety guidelines. The effort is being procured as a subcontract under the NAICS code 541690, classified under environmental and other technical consulting services, and is managed by the Department of Defense through the Land Supply Chain office with performance required at Fort Bliss, Texas, ZIP 79918-0000. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, indicating a narrow window for submission and evaluation. The contracting entity is focused on ensuring timely and accurate documentation to support logistical operations and regulatory compliance across defense supply chains. While specific requirements such as format, numbering conventions, or regulatory frameworks like GHS are not detailed here, adherence to applicable federal and international standards for hazard communication is implied and expected. This subcontract is not set aside for any specific small business category, and all qualified providers must meet the technical and documentation standards necessary to support DoD logistics and safety protocols.

LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Regulatory Compliance and Certification ServicesThe contract pertains to regulatory compliance and certification services specifically focused on preparing and submitting essential documentation for Department of Defense requirements, including HAZMAT labels, material safety data sheets, and packaging certifications. All deliverables must align with DoD standards to ensure safe and lawful handling, transportation, and storage of medical supplies. The work is classified as a subcontract, with the NAICS code 541690 indicating it falls under other scientific and technical consulting services. The place of performance is designated as FPO, ZIP 09579, suggesting operations may involve overseas or military postal locations. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the Medical Supply Chain Pharm FSA under the Department of Defense, requiring strict adherence to federal regulatory frameworks for hazardous materials and compliance documentation.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive management of hazardous materials to ensure full compliance with OSHA regulations under 29 CFR 1910.1200, including identification of all hazardous substances, proper labeling that meets federal standards, and the authorship and timely submission of Safety Data Sheets for each material. These activities must be performed accurately and consistently to maintain workplace safety and regulatory alignment within the Department of Defense’s Active Devices Division. The scope of work is tied directly to the handling, documentation, and communication of chemical hazards to protect personnel and facilitate emergency response. Performance is expected at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work falls under NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on August 9, 2026, with a firm deadline for responses on August 20, 2026, and is structured as a subcontract opportunity within the DIBBS system. There is no set-aside classification indicated, and all deliverables must adhere strictly to federal safety standards without deviation.

ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

Barcoding and Shipment Marking ServicesThe contract requires the application of permanent 2D Data Matrix barcodes and continuous identification markings on aluminum sheets in strict compliance with MIL-STD-129R standards, ensuring durable and legible labeling for military logistics and tracking purposes. The work must be performed at Robins AFB, Georgia, with the contractor responsible for meeting all technical specifications related to barcode sizing, placement, material adhesion, and marking durability under environmental and operational conditions typical of defense supply chains. This subcontract is issued under NAICS code 541690 and is solicited by the Department of Defense through the Warner Robins office, with responses due by August 20, 2026. The contract involves precision labeling services critical for inventory control and supply chain integrity, and bidders must demonstrate the capability to execute high-volume, high-accuracy marking operations that adhere fully to federal military standards without reliance on proprietary or non-standard methods. All work is expected to be completed at the specified performance location, and the successful vendor must support the broader defense logistics infrastructure through reliable, auditable, and repeatable marking processes.

POSTED

about 5 hours ago

DEADLINE

Hazard Communication and Labeling Compliance ServicesThe contract requires the development and application of hazard labels and Material Safety Data Sheets (MSDS) to ensure full compliance with OSHA, DFARS, and MIL-STD-129 standards for all defense material shipments. The work must be performed in alignment with federal regulations governing the safe handling, storage, and transportation of hazardous materials within the Department of Defense supply chain. This subcontract is focused on accurate labeling and documentation to meet rigorous military and occupational safety requirements, with performance specifically tied to Robins Air Force Base, Georgia, 31098-1887. Submission of proposals is due by August 20, 2026, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. All activities must support defense logistics integrity by maintaining consistent, auditable compliance across all labeled and documented shipments.

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract pertains to pre-award preparation and submission of hazard labels for materials that fall outside the scope of federal regulatory requirements, with the primary goal of ensuring full compliance with OSHA’s Hazard Communication Standard and DFARS Appendix F. This work involves developing accurate, legally compliant labeling for hazardous substances used in defense-related operations, particularly at Tinker Air Force Base, where the performance location is specified. The effort requires precise alignment with safety and regulatory standards to support safe handling, storage, and transportation of materials within Department of Defense environments. This subcontract, solicited under NAICS code 541690, targets specialized compliance services and is open for response until August 20, 2026, with the posting date listed as August 9, 2026. The contracting entity is the Department of Defense through its organization Depot Oklahoma, and the work is critical to maintaining operational safety and regulatory adherence for unregulated materials. All submissions must meet the rigorous documentation and labeling criteria defined by OSHA and DFARS, and successful performance will directly support the integrity and safety of defense logistics systems at the specified location.

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Quality Inspection and AQL VerificationThis contract entails the independent inspection and verification of kit attributes against specified Acceptable Quality Level standards, with critical defects governed by AQL 0.1 at Inspection Level VII, major defects by AQL 1.0 at Level IV, and minor defects by AQL 4.0 at Level II. The work requires rigorous adherence to statistical sampling protocols to ensure compliance with military-grade quality expectations, emphasizing precision in identifying and classifying defects across all components of the supplied kits. The solicitation is classified as a subcontract under NAICS code 541330, indicating it falls within the scope of scientific and technical consulting services, and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The opportunity was posted on August 9, 2026, with a response deadline of August 17, 2026, providing a limited window for qualified entities to submit proposals. Performance location details are not specified, and no set-aside status is indicated, suggesting the contract is open to all eligible subcontractors. The point of contact information is not included, and inquiries must be directed through the provided DIBBS portal link to access the full solicitation. Participation requires a thorough understanding of AQL methodologies and the ability to execute inspected audits under strict defense procurement protocols.

Engineering Services

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and MarkingThe contract requires the packaging and marking of an electronic kit in strict compliance with MIL-STD-129 and DLA RP001 standards, ensuring all labeling, identification, and palletization meet Department of Defense shipment specifications. This includes accurate and durable markings for inventory control, traceability, and logistical handling throughout the defense supply chain, with all units to be properly secured on pallets for transport. The work is solicited as a subcontract under NAICS code 493190, indicating it falls within other support activities for transportation, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and performance location details are unspecified, implying fulfillment may occur at the vendor’s facility prior to shipment to DoD destinations.

Other Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

Electronic Equipment Kit ManufacturingThe contract calls for the complete manufacturing and assembly of an Installation Kit for Electronic Equipment with part number 02-2856383-1, encompassing all stages from component sourcing and integration to final testing and quality verification. The work must be executed to meet stringent operational standards, ensuring full functionality and reliability of the completed unit. The contract is classified as a subcontract under the NAICS code 334290, which covers other electronic component manufacturing, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 9, 2026, with a mandatory response deadline of August 17, 2026. The place of performance and specific delivery location are not detailed in the provided data, but the work is expected to align with defense-grade specifications. Bidders must ensure full compliance with all technical, logistical, and quality control requirements without reliance on external documentation beyond the contract terms. The opportunity is accessible via the DIBBS system under solicitation number SPE4A726T630Z.

Other Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Inspection and Quality Assurance ServicesA subcontract is being solicited for inspection and quality assurance services requiring third-party verification at origin to ensure compliance with specified technical requirements and applicable sampling standards including MIL-STD-105 and ASQ Z1.4. The work is aligned with the NAICS code 541330 and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance obligated at Robins AFB, Georgia, zip code 31098-1887. The solicitation was posted on August 9, 2026, and responses must be submitted by August 17, 2026, with all inspections intended to validate product conformity prior to shipment, ensuring quality control throughout the supply chain.

Engineering Services

POSTED

about 5 hours ago

DEADLINE

Export Control Compliance (ITAR/EAR)The contract pertains to the secure handling and protection of technical data subject to the International Traffic in Arms Regulations or the Export Administration Regulations, requiring strict adherence to U.S. export control laws. Compliance includes obtaining and maintaining DLA certification, completing mandatory export control training, and fully implementing the requirements of DFARS 252.225-7048 to ensure the proper safeguarding of controlled information. All activities must be conducted with rigorous oversight to prevent unauthorized access, disclosure, or transfer of sensitive technical data. Performance is designated to occur at Robins Air Force Base, Georgia, with the contracting activity under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. The opportunity is structured as a subcontract, and while no set-aside designation is specified, the NAICS code 541611 indicates it relates to administrative management and general management consulting services, suggesting the need for specialized compliance consultancy or implementation support. Respondents must submit proposals by August 17, 2026, and all work is expected to align with federal defense procurement standards for export control and data security.

Administrative Management and General Management Consulting Services

POSTED

about 5 hours ago

DEADLINE

Military Packaging, Marking, and BarcodingThe contract requires the packaging, labeling, and barcoding of brush seals in full compliance with MIL-STD-129 and ASTM D3951 standards, ensuring defense-grade handling and identification protocols are met. All items must be marked with both Data Matrix and linear barcodes containing unique identifier (U/I) and quantitative unit program (QUP) data to support defense logistics tracking and inventory management across the military supply chain. The work must be performed at Robins Air Force Base, Georgia, with delivery and compliance expectations tied directly to the specified federal standards for military packaging and marking. This is a subcontract opportunity issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 17, 2026, and posted on August 9, 2026. The NAICS code 561910 categorizes the work under Other Support Activities for Transportation, indicating specialized logistics and packaging services are central to the requirement. There is no set-aside designation, and the full scope demands precise adherence to barcoding specifications and packaging procedures to ensure seamless integration into military inventory systems. All deliverables must align with the exact technical and administrative requirements outlined in the referenced standards.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Hazardous Material Compliance & LabelingThe contract requires the preparation and submission of material safety data sheets and hazardous warning labels for chemicals used in or with brush seals, ensuring full compliance with OSHA’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement. Work must be performed in accordance with federal regulations governing the communication of chemical hazards, with all documentation accurately reflecting material composition, associated risks, handling procedures, and emergency response measures. The deliverables must align with Department of Defense requirements and be submitted by the deadline to support operational safety and regulatory adherence. Performance is centered at Robins Air Force Base, Georgia, with the contract classified as a subcontract under NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026. The awarding agency is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and all work must meet stringent military procurement standards, including adherence to applicable DFARS clauses. Failure to comply with labeling or documentation requirements may result in non-conformance and disqualification from contract fulfillment.

Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Brush Seal, Cover (NSN 1680-01-062-1740)The contract calls for the full manufacturing of brush seals according to technical drawing NR 76301 68A582035, encompassing all aspects of production from material sourcing and machining to final assembly and quality inspection. The item being produced is identified by NSN 1680-01-062-1740 and is designated as a brush seal cover, intended for defense-related applications. Work must be performed to exacting standards with all processes verified to ensure compliance with technical requirements and performance expectations. This subcontract is issued under NAICS code 332996 for other fabricated metal product manufacturing and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance is specified as Robins AFB, Georgia, with a zip code of 31098-1887. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, with all submissions required to be completed electronically via the designated DIBBS platform using the provided link. There is no set-aside designation specified, and the contract is open to eligible subcontractors meeting technical and compliance criteria.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Cybersecurity and Covered Defense Information (CDI) SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard Covered Defense Information (CDI) within defense manufacturing operations, ensuring full compliance with DFARS 252.204-7012. This subcontract pertains to cyber defense measures for handling sensitive government data, mandating adherence to federal standards for protecting information systems against threats and unauthorized access. The work must be performed at Tinker Air Force Base, Oklahoma, under the oversight of the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, and all security protocols must be continuously enforced to meet regulatory obligations throughout the contract lifecycle. Responses to this solicitation are due by August 17, 2026, and the effort falls under NAICS code 541512, which designates computer systems design and related services. The subcontractor must possess the technical capability to assess current cybersecurity posture, deploy required NIST controls across all relevant systems, document compliance, and support audits or assessments as needed. Continuous monitoring and reporting of security events are mandatory, and failure to maintain compliance may result in termination or loss of eligibility for future DoD work. This contract is critical for ensuring the integrity and confidentiality of defense-related data processed within the supplier’s operational environment.

Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Special Process AuditingThe contract requires third-party providers to perform or oversee NADCAP-approved special processes and AS9100-compliant quality audits within defense manufacturing operations, ensuring adherence to stringent aerospace and defense industry standards. The scope involves verifying that subcontractors and suppliers maintain compliance with specialized aerospace requirements for processes such as heat treatment, nondestructive testing, chemical processing, and welding, all critical to mission-critical defense components. Audits must align with the latest AS9100 quality management system standards, demonstrating consistent capability, traceability, and continuous improvement in production environments at Tinker Air Force Base. This subcontract opportunity, posted by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, targets qualified third-party auditors or service providers with proven experience in special process validation and defense supply chain oversight. The response deadline is August 17, 2026, and performance will be based at Tinker AFB with a zip code of 73145-8000. While no set-aside designation is specified, the NAICS code 541330 indicates the work falls under engineering services, suggesting applicants must possess technical expertise in quality systems auditing, NADCAP accreditation familiarity, and direct experience in defense or aerospace manufacturing contexts. Compliance with all technical and procedural requirements is mandatory for award consideration.

Engineering Services

POSTED

about 5 hours ago

DEADLINE

Hazardous Material Packaging and LabelingThe contract requires regulatory-compliant packaging, labeling, and safety data sheet preparation for hazardous materials utilized in manufacturing operations, strictly adhering to OSHA's Hazard Communication Standard and MIL-STD-129 specifications. All work must meet federal safety and documentation standards to ensure proper handling, storage, and transportation of dangerous goods throughout the supply chain. The scope encompasses accurate material identification, standardized labeling formats, and fully compliant SDS documentation that align with current regulatory requirements for military and industrial use. The contract is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance located at Tinker Air Force Base, Oklahoma, zip code 73145-8000. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026. It falls under NAICS code 561910, which corresponds to waste management and remediation services, indicating a focus on specialized hazardous material handling and documentation services. The contract does not specify a set-aside type and is open to qualified subcontractors capable of meeting stringent defense and safety standards.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Precision Manufacturing of Structural Support ComponentsPrecision fabrication of structural support components is required for defense applications under a subcontract solicitation issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The work demands full compliance with DLA specifications, MIL-STD-1916 for statistical process control, and AS9100 quality management standards to ensure mission-critical reliability and consistency. Performance is required at Tinker Air Force Base with a ZIP code of 73145-8000, and the NAICS code 332999 indicates it falls under other fabricated metal product manufacturing. The solicitation was posted on August 9, 2026, with a firm response deadline of August 17, 2026, and the opportunity is accessible via the DIBBS portal. No set-aside preferences are indicated, and the procurement is open to qualified contractors capable of meeting stringent defense-grade manufacturing requirements.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE