Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Labeling Services

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous gasket materials, ensuring full compliance with OSHA’s Hazard Communication Standard and the Globally Harmonized System of Classification and Labeling of Chemicals. Work must be performed to meet all regulatory requirements for identifying chemical hazards, communicating risk information, and standardizing labeling and documentation practices as mandated by federal safety guidelines. The deliverables are critical for end users handling these materials within Department of Defense operations and must be accurate, complete, and up to date to support workplace safety and regulatory compliance. This subcontract is issued under NAICS code 541620 for scientific and technical consulting services and is tied to the Department of Defense’s Land Supplier Operations Vehicle Support division. The performance location is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The contract is available via the DIBBS platform and is intended for qualified providers capable of delivering compliant hazard communication documentation for hazardous gasket substances used in military vehicle and equipment systems.

General Info

Prepare and submit OSHA- and GHS-compliant hazard labels and MSDS for military gasket materials in New Cumberland, PA.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) compliant with OSHA HAZCOM and GHS standards for hazardous gasket materials.

Similar Contracts

Same NAICS industry code

Radioactive Materials Notification & ComplianceThe contract requires the screening, documentation, and labeling of radioactive materials that may be present in cutting tools exceeding regulatory thresholds, ensuring full compliance with 10 CFR 20 and Department of Defense standards. This includes identifying any radioactive contamination, maintaining accurate records, and applying appropriate labels to signify the presence of regulated materials, all performed with precision to meet federal and military safety protocols. The work must be carried out in accordance with established procedures to prevent exposure risks and ensure regulatory adherence throughout the handling and reporting process. This subcontract is issued under NAICS code 541620 by the Defense Logistics Agency, a component of the Department of Defense, with performance required at a location in Springfield, ZIP 65803-9513. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, indicating a tight turnaround for qualified vendors to submit proposals. Although no set-aside type or point of contact is specified, the emphasis on regulatory compliance and precise documentation underscores the critical nature of the task within defense supply chain safety protocols.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive identification, documentation, and labeling of hazardous materials in full compliance with OSHA’s Hazard Communication Standard and MIL-STD-129, ensuring all materials are properly marked and documented for military and industrial use. Prior to contract award, vendors must submit complete Material Safety Data Sheets and approved warning labels, demonstrating readiness to meet regulatory and operational safety requirements. The work is designated as a subcontract under NAICS code 541620, with performance specifically located in New Cumberland, Pennsylvania, at the zip code 17070-5002. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense under LAND SUPPLIER OPNS ENGINES, reflecting a focus on defense supply chain integrity and safety compliance.

LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance and SDS DocumentationThis contract entails providing regulatory compliance support for hazardous materials used in packaging or products, with a focused emphasis on preparing Safety Data Sheets and ensuring proper labeling in accordance with OSHA and Department of Defense standards. The work is required to meet stringent federal regulations governing the handling, documentation, and communication of hazardous substances to ensure safety and legal compliance across military supply chain operations. All deliverables must align with current federal guidelines and be tailored to the specific needs of DoD-related applications. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated for small business entities as defined by the SBA, and is classified under NAICS code 541620 for environmental consulting services. Performance is required to occur in New Cumberland, Pennsylvania, with a response deadline of August 13, 2026, and the opportunity was posted on August 2, 2026. Bidders must demonstrate expertise in hazardous materials compliance, SDS documentation, and familiarity with both civilian and military regulatory frameworks, as the outcome directly supports the Department of Defense’s Maritime Supply Chain operations.

MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance and Documentation SupportThe contract seeks specialized support for regulatory compliance related to hazardous materials, focusing on the preparation of material safety data sheets, accurate hazard labeling, and timely reporting of exemptions in accordance with federal standards. This work is essential to ensure that all hazardous material handling, storage, and transportation activities meet required safety and environmental regulations under federal guidelines. The contract is structured as a subcontract under a Total Small Business Set-Aside, specifically designated for small businesses as defined by the SBA, with the NAICS code 541620 indicating environmental consulting and related services. It is issued by the Department of Defense through the Land Supplier Operations Vehicle Support office, with submissions due by August 17, 2026. Although the physical location of performance and direct point of contact are not specified, the solicitation is accessible via the DIBBS platform, and all responders must be registered small businesses eligible under the set-aside criteria to be considered.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires comprehensive hazard communication support aligned with OSHA’s Hazard Communication Standard and DFARS 252.223-7001, covering the preparation of Safety Data Sheets and proper labeling for all items, regardless of whether they are inherently hazardous. This includes addressing potential risks from packaging materials or residual substances resulting from manufacturing or processing, ensuring full regulatory compliance across the supply chain. The scope demands rigorous attention to detail in documentation and labeling practices to meet federal requirements, even for items that may not pose direct chemical hazards. This is a subcontract under the Department of Defense, specifically managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance expected to occur in Mechanicsburg, Pennsylvania, 17050-2411. The solicitation, categorized under NAICS code 541620 for management consulting services, was posted on August 2, 2026, with responses due by August 13, 2026. Contractors must be prepared to demonstrate expertise in regulatory adherence, document accuracy, and the ability to manage complex labeling requirements under defense contracting frameworks, with all deliverables tied to ensuring safe handling and transport of materials within military supply systems.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract requires full compliance with hazardous materials handling standards as outlined in 29 CFR 1910.1200, focusing on proper labeling of tubing and packaging that may contain hazardous substances. This includes accurate, up-to-date Safety Data Sheet (SDS) management to ensure all relevant chemical information is accessible and correctly documented for personnel handling or transporting the materials. The scope is tied specifically to the physical goods involved, with emphasis on regulatory adherence to federal workplace safety standards. This is a subcontract solicitation issued by the Department of Defense under the MARITIME SUPPLY CHAIN ESOC BUYS, with a NAICS code of 541620 indicating it relates to scientific and technical consulting services. The response deadline is August 13, 2026, and performance is required in Milwaukee, Wisconsin, with a postal code of 53218-3343. The solicitation was posted on August 2, 2026, and bidders must ensure their compliance capabilities align with the regulatory requirements before submitting a proposal.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

Hazard Communication and OSHA Labeling ServicesThe contract requires the design and application of hazard warning labels for packaged materials in strict compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001. This work involves ensuring all chemical containers and shipments are properly labeled with standardized hazard pictograms, signal words, precautionary statements, and supplier identification to meet federal safety and defense procurement requirements. The labels must be durable, legible, and consistently applied across all relevant materials shipped to or processed by the Department of Defense’s Fluid Handling Division. The contract is classified as a subcontract under NAICS code 541620, which pertains to other scientific and technical consulting services, and is being managed out of Albany, Georgia with a ZIP code of 31704-1128. The solicitation was posted on August 2, 2026, and responses must be submitted by August 13, 2026. The work is intended to support defense logistics operations by ensuring full regulatory alignment with both civilian safety standards and military supply chain compliance protocols, where accurate hazard communication is critical for personnel safety and operational readiness.

FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Packaging and Labeling Compliance SpecialistThe contract requires strict adherence to U.S. government packaging and labeling standards for lamps, specifically compliance with MIL-STD-129, FED-STD-313, and DLA RP001 to ensure alignment with Defense Logistics Agency logistics protocols. This subcontract involves ensuring all packaging materials, labeling formats, barcoding, and documentation satisfy the rigorous military supply chain requirements for traceability, durability, and uniformity across federal distribution networks. The work must be executed in accordance with DLA specifications to guarantee seamless integration into the Department of Defense’s inventory and deployment systems. The position is titled Packaging and Labeling Compliance Specialist and is classified under NAICS code 541620, indicating it falls within the Management Consulting Services category. The solicitation was posted on August 2, 2026, with a mandatory response deadline of August 13, 2026. Performance is required to take place in Johnston, Iowa, with a zip code of 50131-0000. The contract is issued by the Defense Logistics Agency under the Department of Defense and is accessible via the DIBBS platform with the reference number SPE8E726T3449. There is no set-aside designation specified, and the solicitation is open to qualified subcontractors capable of meeting federal military standards without deviation.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract mandates the provision of hazard warning labels and Safety Data Sheets (SDS) for all delivered items, ensuring full compliance with OSHA regulations and Defense Federal Acquisition Regulation Supplement (DFARS) requirements. This subcontract is specifically aimed at supporting military logistics operations by accurately identifying hazardous materials through standardized labeling and documentation, thereby safeguarding personnel and ensuring regulatory adherence throughout the supply chain. The place of performance is designated as TEXARKANA, TX, with a zip code of 75507-5000, indicating the physical location where deliverables must be coordinated or fulfilled. The solicitation, issued under the NAICS code 541620 for Environmental Consulting Services, was posted on August 2, 2026, and requires responses no later than August 13, 2026. The contracting entity is the Department of Defense, operating through the RED RIVER RECEIVING BLDG, and the work is scoped strictly to hazardous materials compliance services. The subcontractor must be prepared to deliver precise, up-to-date SDS documents and OSHA-compliant hazard labels that meet federal defense standards, with no flexibility for nonconforming content or formatting. All deliverables will be subject to rigorous verification to ensure alignment with mandatory safety and documentation protocols.

RED RIVER RECEIVING BLDG

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance (Hexavalent Chromium)The contract mandates strict compliance with DFARS 252.223-7008 to prohibit the use of hexavalent chromium in all manufacturing processes and supplied materials, requiring comprehensive verification and testing throughout the supply chain to ensure adherence. All subcontractors and suppliers must implement documented procedures to identify, exclude, and certify the absence of hexavalent chromium in components and finishes, with verification through laboratory testing and chain-of-custody records to validate compliance at every tier. The solicitation falls under NAICS code 541620 and is structured as a subcontract, with a response deadline of August 17, 2026, and a posted date of August 2, 2026. It is managed by the LSO Combat Vehicles and Armament office within the Department of Defense, and performance is expected to support defense-related manufacturing efforts without specified geographic limitations. All parties must maintain traceability and provide evidence of compliance upon request, with failure to meet requirements potentially resulting in contract termination or penalties.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires the provision of hazardous material labeling and fully compliant Safety Data Sheets (SDS) for components shipped under federal and military regulatory standards, ensuring all materials meet the required safety and informational protocols for transportation, handling, and storage. This subcontract is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, aligning with NAICS code 541620 for scientific and technical consulting services, and is managed by the Department of Defense under the Construction & Equipment Manu & Con organization. Performance is to be carried out at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must adhere strictly to applicable federal and military regulations governing hazardous materials. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, indicating a tight turnaround for qualified small businesses to submit proposals. The contract does not include a solicitation number, and no point of contact information is provided, suggesting that all inquiries and submissions must follow standard DIBBS platform procedures via the provided UI link. Compliance with SDS formatting, hazard communication standards, and labeling requirements is critical, as failure to meet these specifications could result in rejection or noncompliance penalties under federal transportation and workplace safety laws. This effort supports the DoD’s obligation to maintain safe handling procedures for hazardous components across its supply chain.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract requires the identification and classification of hazardous materials according to FED-STD-313, the preparation of Safety Data Sheets that meet regulatory standards, and full compliance with OSHA’s Hazard Communication Standard. The work involves ensuring all chemical substances and mixtures are properly evaluated, labeled, and documented to support safe handling, storage, and transport within defense-related operations. The scope is focused on accurate hazard determination and regulatory alignment to protect personnel and maintain operational safety. Performance of the contract is designated for New Cumberland, Pennsylvania, with a response deadline of August 13, 2026, and the solicitation falls under NAICS code 541620, indicating engineering and technical services. The contracting entity is the Active Devices Division within the Department of Defense, and the engagement is structured as a subcontract. All deliverables must meet federal standards for hazard communication, with an emphasis on documentation accuracy, regulatory adherence, and timely submission of SDS materials to support ongoing defense activities.

ACTIVE DEVICES DIVISION

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Logistics and Delivery Coordination (FOB Origin)This contract requires coordination of FOB Origin shipments to multiple destinations under the Defense Logistics Agency, ensuring full compliance with federal logistics standards including WAWF-compliant invoicing, real-time shipment tracking, and accurate documentation required for defense supply chain operations. The work involves managing the end-to-end transportation process from origin point to designated DLA delivery locations, with strict adherence to federal regulations governing military procurement and logistics. All activities must support the Department of Defense’s operational readiness by maintaining timely, secure, and traceable delivery of materials. The contract is a small business set-aside under the SBA program, fully reserved for small businesses as defined by FAR 19.5, and is classified under NAICS code 484121 for general freight trucking. It is issued as a subcontract under the Land Supplier Operations Vehicle Support organization, with a response deadline of August 17, 2026. Prospective bidders must be prepared to handle complex logistics workflows while meeting federal compliance and reporting obligations, with no specified place of performance listed, indicating that operations will occur across multiple locations as needed by DLA requirements. The solicitation is accessible via the DIBBS platform for submission and further details.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 6 hours ago

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires the provision of military-compliant packaging, labeling, and bar-coding services for pneumatic brake valves, strictly adhering to MIL-STD-129 and DLA RP001 standards. All work must meet detailed defense logistics specifications to ensure proper identification, handling, and tracking of critical vehicle components throughout the supply chain. The requirement is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside category, meaning only small business concerns may submit proposals. The NAICS code 561910 indicates the work falls under Other Support Activities for Transportation, aligning with specialized logistics and packaging services. The solicitation is issued under the Department of Defense’s Land Supplier Operations Vehicle Support organization, with a response deadline of August 17, 2026, and was posted on August 2, 2026. The place of performance and specific delivery locations are not detailed in the provided data, but performance is expected to support Defense Logistics Agency supply chain requirements. This is a subcontract opportunity, and interested parties must access the full solicitation details through the official DIBBS portal to understand full technical, compliance, and administrative obligations.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Pneumatic Brake Valve Manufacturing and SupplyThe contract requires the manufacture and supply of pneumatic brake valves meeting military specifications under NSN 2530015765332 and Part Number BW K031485, with delivery destined for the Defense Logistics Agency. The requirement is structured as a subcontract and is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provisions as defined by FAR 19.5, ensuring eligibility is restricted to qualified small business concerns. The NAICS code 332912 applies, indicating the work falls under Other Fabricated Metal Product Manufacturing, and the solicitation was posted on August 2, 2026, with responses due by August 17, 2026. Performance will support the Department of Defense through the Land Supplier Opns Vehicle Spt organization, though specific delivery locations are not detailed. All bids must comply with military-grade standards and be submitted via the DIBBS platform using the solicitation number SPE7L326U0667.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Government-Compliant Packaging and ShippingThe contract requires specialized packaging that complies with MIL-DTL-117 standards to meet Department of Defense requirements for defense logistics authority compliance. All shipments must be coordinated to ensure traceable freight delivery to the designated DoD warehouse located in Mechanicsburg, Pennsylvania, with a strict prohibition against the use of parcel post methods to maintain security and accountability throughout the supply chain. The packaging must be certified, documented, and verified to ensure full adherence to military specification criteria, ensuring compatibility with DoD inventory and handling systems. The solicitation is classified as a subcontract with a NAICS code of 561910, indicating it falls under support services for transportation and logistics. The posting date is August 2, 2026, with a response deadline of August 13, 2026, leaving a twelve-day window for submissions. The performance location is fixed at the Mechanicsburg warehouse with ZIP code 17050-2411, and the contract is administered by the Department of Defense under the Land Supplier Operations Vehicle Support division. All participants must ensure end-to-end logistics coordination, documentation tracking, and compliance with federal shipping protocols to fulfill contractual obligations without deviation.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Precision Gasket Manufacturing and SupplyThe contract requires the manufacture and delivery of one precision gasket identified by NSN 5330-01-715-1881, adhering strictly to military standards including MIL-STD-130N for permanent marking and MIL-DTL-117 for packaging requirements. The gasket must be completely free of asbestos and produced to meet the technical specifications essential for military vehicle support applications. The work is to be performed at the designated place of performance in Mechanicsburg, Pennsylvania, with a zip code of 17050-2411, ensuring alignment with logistical and operational needs of the Department of Defense. This is a subcontract under NAICS code 332999 for other fabricated metal product manufacturing, issued by the Land Supplier Operations Vehicle Support branch of the Department of Defense. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, providing a narrow window for qualified vendors to submit proposals. The contract is accessible via the DIBBS system under solicitation reference SPE7L326T144Z, and all deliverables must fully comply with federal defense procurement regulations to ensure compatibility with existing military logistics and maintenance systems.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Transportation and Logistics for Sea and Land ShipmentThe contract entails the transportation of gasket and packing materials across both land and sea routes, ensuring full compliance with the Defense Transportation System and stringent military labeling standards. All shipments must adhere to federal and defense-specific protocols for handling, identification, and documentation to support secure and accurate delivery within the military supply chain. The performance location is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the primary operational area for receiving, consolidating, or distributing materials. This is a subcontract under NAICS code 483111, which corresponds to inland water transportation, and was posted on August 2, 2026, with a mandatory response deadline of August 13, 2026. The contracting entity is the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT, and the work is intended to sustain critical logistics operations for defense-related equipment and systems. Bidders must be prepared to demonstrate capability in managing multi-modal logistics, meeting exacting military compliance requirements, and ensuring timely delivery under tight operational timelines. Failure to comply with labeling or transportation standards will result in rejection or debarment.

Deep Sea Freight Transportation

POSTED

about 6 hours ago

DEADLINE

Cybersecurity and NIST SP 800-171 Compliance SupportThe contract requires the implementation and assessment of NIST Special Publication 800-171 security controls to safeguard Covered Defense Information and ensure compliance with Defense Federal Acquisition Regulation Supplement requirements. This effort is focused on establishing a robust cybersecurity posture capable of protecting sensitive data associated with Department of Defense contracts, with specific emphasis on meeting mandatory standards outlined in NIST SP 800-171. The work involves evaluating existing systems, identifying gaps in security controls, applying necessary technical and administrative safeguards, and documenting compliance through formal assessment processes. The contract is classified as a subcontract under NAICS code 541512, indicating it pertains to computer systems design services, and is tied to a performance location in New Cumberland with a ZIP code of 17070-5002. Solicitation details indicate a firm deadline for responses by August 13, 2026, following a posting date in August 2026. The contracting entity is the Department of Defense under the organization name LAND SUPPLIER OPNS VEHICLE SPT, and the work is intended to support the secure handling of defense-related information within the supply chain. Compliance outcomes will directly influence eligibility for continued participation in defense contracting activities.

Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

Gasket and Preformed Packing Supply and PackagingThe contract requires the supply, packaging, and delivery of gasket and preformed packing materials that meet strict military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling and marking. All materials must be manufactured, packaged, and transported in full compliance with these specifications to ensure readiness and compatibility with Department of Defense logistics and storage protocols. The delivery location is designated as New Cumberland, Pennsylvania, with zip code 17070-5002, and the work must be completed by the response deadline of August 13, 2026. This is a subcontract under the NAICS code 332996, which classifies it under Other Miscellaneous Metal Product Manufacturing, indicating the specialized nature of the components involved. The solicitation is managed by the Land Supplier Operations Vehicle Support arm of the Department of Defense, and all submissions must adhere to the procedural requirements for government subcontracting, though no set-aside provisions are specified.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of High-Temperature Coatings and CARC PaintsThe contract requires the supply of certified CARC and high-temperature paints that meet exact military formulations, ensuring performance under extreme operational conditions. All materials must include full batch traceability to guarantee consistency and compliance, with sourcing strictly adhering to DFARS regulations to ensure all components originate from approved, domestic or qualifying sources. The paints are intended for use in military vehicle maintenance and refurbishment, demanding durability, corrosion resistance, and adherence to strict environmental and safety standards. Performance of this subcontract is centered at New Cumberland, Pennsylvania, with a response deadline of August 13, 2026, and the solicitation was posted on August 2, 2026. The NAICS code 325510 identifies the industry as paint and coating manufacturing, aligning with the nature of the deliverables. The contracting entity operates under the Department of Defense, specifically through the Land Supplier Operations Vehicle Support division, emphasizing the defense-critical application of these materials. Participation is open under a subcontract structure, with no set-aside preferences indicated, and all providers must meet the rigorous technical and compliance criteria outlined in the military specifications.

Paint and Coating Manufacturing

POSTED

about 6 hours ago

DEADLINE

ITAR-Controlled Technical Data Handling and JCP-Certified Engineering SupportThis contract requires engineering support services involving access to ITAR-controlled technical data, necessitating strict adherence to U.S. export control regulations. All personnel must hold current JCP certification to handle, process, or transmit sensitive technical information, and all data handling procedures must comply with federal security protocols for classified and controlled unclassified information. The work is to be performed at the specified location in New Cumberland, Pennsylvania, with a deadline for proposal submission on August 13, 2026. The contract is structured as a subcontract under NAICS code 541690, supporting defense-related activities under the Department of Defense, with the contracting office operating under LAND SUPPLIER OPNS VEHICLE SPT. Security compliance and certification validation are mandatory prerequisites for participation, and failure to meet these requirements will render a proposal non-responsive.

Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE