Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance & Safety Data Sheet (SDS) Preparation

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the preparation and submission of Safety Data Sheets (SDS) in full alignment with OSHA regulations and federal defense standards, ensuring accurate hazard communication and proper labeling of hazardous materials. This subcontract requires the vendor to deliver comprehensive SDS documentation that meets stringent military and occupational safety requirements, with particular attention to the handling, storage, and transport of hazardous substances within defense operations. The work must adhere to all applicable regulatory frameworks governing chemical safety and information dissemination. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and is classified under NAICS code 541690 for other scientific and technical consulting services. Performance is to be carried out at an FPO location with a zip code of 34085, underscoring the logistical and operational nature of the work tied to Department of Defense activities. The contracting office, Fluid Handling Division, is seeking qualified subcontractors capable of reliably producing compliant SDS documentation to support defense infrastructure and supply chain safety protocols.

General Info

Prepare and submit OSHA-compliant SDS for defense hazardous materials at FPO 34085 by August 14, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

FPO, AA, 34085, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation and submission of Safety Data Sheets (SDS) in compliance with OSHA and federal defense standards, including hazard communication and labeling.

Similar Contracts

Same NAICS industry code

Construction Safety Services IDIQThe Port of Seattle has initiated a proactive Construction Safety Services IDIQ to address the growing complexity and liability associated with construction activities on its property. With increasing legal obligations and heightened scrutiny from recent court rulings, the Port is formalizing a comprehensive safety program to ensure all construction projects are conducted without disrupting port operations and with the highest standards of worker and public safety. This initiative is designed to monitor, enforce, and continuously improve safety protocols across all construction sites under Port jurisdiction, reflecting a strategic shift toward risk mitigation and regulatory compliance. The contract is issued under NAICS code 541690 and is structured as an indefinite delivery/indefinite quantity agreement to provide flexible access to qualified safety service providers. The program will support a range of construction activities by integrating expert safety oversight, compliance auditing, and operational coordination directly into project workflows. Point of contact for inquiries is Sue Yi, with Bruce Gamble serving as the Project Manager, and further details can be found through the Port’s official solicitation portal. The forecasted posting date indicates the Port is preparing to solicit proposals in the near future to establish a pool of vetted safety service firms ready to respond to emergent and planned construction needs.

Construction Management

POSTED

about 1 hour ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # C2305

The Elsinore Valley Municipal Water District is seeking professional design, bidding support, and engineering services to replace the existing Corydon well with a new municipal groundwater production well on the same property, utilizing existing transmission infrastructure to meet growing water demand. The project is funded through a combination of District funds and a U.S. Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, identified by CFDA number 15.507 and award number R24AP00468-00. The scope spans two phases: Phase 1 includes the design and technical specifications for well construction and abandonment of the old well, while Phase 2 covers architectural, civil, mechanical, and electrical design for equipment installation and commissioning. Key deliverables include 60% design submittals, civil and structural drawings, line-bid schedules, stormwater BMPs, waste management plans, water sampling protocols, daily construction logs, and agency coordination reports, all formatted per EVMWD and regulatory requirements. The work must comply with California Labor Code, prevailing wage laws, NPDES and WDR permits, SWRCB standards, Riverside County regulations, the Buy America Act, and Federal grant requirements under 2 CFR Part 200, with all technical submittals certified by California-registered hydrogeologists and professional engineers. Contract performance is scheduled to begin October 1, 2024, and conclude September 30, 2027, with payments processed exclusively through the Department of Treasury’s ASAP system to Citibank N.A. using the specified routing and account numbers. The contract value is estimated at $2,260,788, encompassing both direct and indirect costs. Proposals must be submitted electronically via the PlanetBids Vendor Portal by 10:00 a.m. local time on September 1, 2026, and include a cover letter, project approach, resumes of personnel, representative project lists, references, district experience, cost proposal, conflict of interest disclaimer, insurance acknowledgment, public works certification, Iran Contracting Act certification, and non-collusion declaration. Offerors must maintain an active SAM registration and provide a Unique Entity Identifier, and specific DBE, MBE, and WBE participation is required under non-federal certification standards (DBE through DOT, MBE through NMSDC, WBE through WBENC). Insurance must meet minimum A.M. Best A-.VII ratings, with certificates approved

TKE Engineering, Inc.

POSTED

about 5 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThis contract requires the provision of globally harmonized system compliant safety data sheets, hazard warning labels, and MIL-STD-129 marking for hazardous materials used in shipment and storage, ensuring full alignment with Defense Federal Acquisition Regulation Supplement and Defense Logistics Agency mandates. All deliverables must meet stringent military standards for labeling and documentation to support safe handling, transport, and long-term storage of hazardous commodities within DOD supply chains. The work is performance-based and tied to a specific location in Jacksonville with a ZIP code of 32212-0103, and the solicitation falls under NAICS code 541690 for other scientific and technical consulting services. It is structured as a subcontract with a response deadline of August 14, 2026, and was posted on August 3, 2026. Compliance with DFARS and DLA requirements is mandatory, and all materials must be accurately marked and documented for traceability and safety throughout the logistics lifecycle.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance and Documentation ServicesThe contract requires the provision of hazard warning labels, Safety Data Sheets, and regulatory compliance documentation for all hazardous components included in a parts kit, ensuring adherence to applicable safety and environmental regulations. The work is scoped for a subcontract under the Department of Defense, with the place of performance specified as San Diego, California, 92136-3581, and the NAICS code 541690 indicates it falls under other professional, scientific, and technical services, specifically environmental and compliance-related consulting. All deliverables must accurately reflect the chemical and physical hazards of the materials in the kit and comply with international, federal, and defense-specific standards for labeling and documentation. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and is administered through the Defense Logistics Agency’s DIBBS system. The contracting entity, LAND SUPPLIER OPNS VEHICLE SPT, operates within the broader Department of Defense supply chain framework, emphasizing the critical need for precise, timely, and legally compliant documentation to support safe handling, storage, transport, and use of hazardous materials in military equipment. Failure to provide complete and correct documentation may result in rejection of the parts kit and non-compliance penalties, making accuracy and regulatory alignment the primary focus of the subcontractor’s deliverables.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires the preparation and timely submission of Safety Data Sheets (SDS) for hazardous materials, strictly aligned with OSHA’s 29 CFR 1910.1200(g) and Federal Standard No. 313, to ensure full regulatory compliance prior to any contract award. All SDS must accurately detail the chemical composition, hazards, handling procedures, emergency measures, and disposal guidance for materials used under the agreement, reflecting current scientific and regulatory standards. Submission deadlines are critical, as noncompliance or delays could disqualify respondents from contract consideration. This subcontract is solicited under NAICS code 541690 and managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office, with performance expected to occur in Conneaut Lake, Pennsylvania, 16316-6661. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with no set-aside designation specified. Interested parties must ensure their SDS documentation meets all federal safety requirements before the deadline, as failure to deliver accurate, compliant materials will result in automatic disqualification regardless of other qualifications.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data SupportThe contract requires strict adherence to OSHA Hazardous Communications Standard for all hazardous materials contained in or on the valve, mandating the accurate generation and provision of Safety Data Sheets in full compliance with Clause 252.223-7001. This includes identifying, classifying, and documenting chemical hazards associated with the product and ensuring complete, up-to-date SDS documentation is available for government review and use. The work is structured as a small business set-aside under the SBA program with NAICS code 541690, indicating it targets specialized scientific and technical services. The place of performance is designated as New Cumberland, Pennsylvania, and the contracting activity is the Department of Defense’s DDSP New Cumberland Facility. Responses must be submitted by the deadline of August 14, 2026, with solicitation details accessible through the DIBBS platform.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

Defense-Compliant Packaging and MarkingThe contract requires compliant packaging of springs in accordance with military standards, specifically MIL-STD-129, which mandates the use of heat-sealed barrier bags, approved preservation techniques to prevent corrosion and degradation, and accurate barcode labeling for inventory and logistics tracking. All packaging must meet stringent Defense Department specifications to ensure durability, traceability, and readiness in operational environments. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reinforcing the government’s commitment to small business participation in defense supply chains. The solicitation targets vendors capable of fulfilling requirements for the Fluid Handling Division within the Department of Defense, with performance obligations centered in Phoenix, Arizona, at the ZIP code 85043. The opportunity was posted on August 3, 2026, with responses due by August 14, 2026, and is categorized under NAICS code 541690, which covers other scientific and technical consulting services. Bidders must ensure full compliance with all marking, labeling, and packaging protocols without exception, as failure to meet these standards will constitute nonconformance. The contract is managed through the DIBBS platform and is intended to support defense logistics infrastructure through precise, standardized, and secure packaging solutions.

FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires comprehensive authoring, submission, and ongoing maintenance of Safety Data Sheets for hazardous components used in filter elements, ensuring full compliance with OSHA’s Hazard Communication Standard under 29 CFR 1910.1200. This work involves accurately identifying chemical hazards, structuring SDS documentation according to mandated global harmonization formats, and ensuring timely updates when formulations or regulatory requirements change. The contractor must maintain strict adherence to federal safety communication protocols and deliver properly formatted, legally compliant SDS documents for all relevant hazardous constituents within the filter manufacturing supply chain. This subcontract is identified under NAICS code 541690 and is set aside exclusively for small businesses as defined by the Small Business Administration, indicating a focus on supporting small business participation in defense-related compliance services. The solicitation was posted by the Strategic Acquisition Program Directorate within the Department of Defense, with a firm response deadline of August 18, 2026. All work is to be performed in support of federal hazardous materials safety standards, and while the physical location of performance is unspecified, the deliverables must meet the regulatory expectations of U.S. occupational safety authorities. The contract emphasizes precision, regulatory awareness, and sustained quality control in SDS lifecycle management.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the development of hazard warning labels and safety data sheets that strictly adhere to OSHA hazard communication standards and DFARS regulatory requirements for military shipments. This work is critical to ensuring the safe handling, storage, and transport of hazardous materials within defense logistics operations, with all documentation must meet federal compliance benchmarks for clarity, accuracy, and consistency. The subcontractor will be responsible for producing compliant materials that align with updated federal regulations and support the Defense Logistics Agency’s mission to maintain operational safety across the supply chain. This effort falls under NAICS code 541690, classifying it as other scientific and technical consulting services, and is executed under the Department of Defense through the Defense Logistics Agency. Performance of the work is not restricted to a specific geographic location, allowing flexibility in execution while maintaining strict adherence to federal standards. The contract was posted on August 3, 2026, and is managed through the DIBBS system under contract number SPE7M226V4554, with no set-aside provisions identified, indicating open competition eligible for qualified vendors.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires the provision of comprehensive regulatory compliance services for hazardous materials, with a primary focus on the preparation, validation, and ongoing maintenance of Safety Data Sheets in strict alignment with OSHA 29 CFR 1910.1200, DFARS 252.223-7001, and MIL-STD-129 standards. This includes ensuring all documentation meets federal requirements for hazard communication, material handling, and labeling, particularly for defense-related operations and supply chains. The work must support accurate, current, and compliant SDS documentation across all phases of product lifecycle management, with an emphasis on regulatory accuracy and audit readiness. The contract is classified as a subcontract under NAICS code 541690, with a response deadline of August 14, 2026, and performance to be conducted at a designated location in Dulles, Virginia, with a zip code of 20166-7629. It is issued by the Active Devices Division under the Department of Defense, indicating a direct connection to defense logistics and procurement activities. The services are critical to ensuring compliance across military and civilian supply chains, and contractors must demonstrate expertise in federal hazardous materials regulations and experience with DoD-specific documentation protocols.

ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThis contract requires compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and applicable DFARS clauses for the identification, classification, and labeling of hazardous components. The work involves ensuring all chemical substances and mixtures used or handled under the subcontract are accurately assessed for health and physical hazards, properly classified according to GHS standards, and labeled with standardized hazard statements, pictograms, and precautionary information. The contractor must maintain documentation that supports the classification process and aligns with federal regulatory requirements for defense-related supply chains. The contract is issued under NAICS code 541690 for other scientific and technical consulting services and is structured as a subcontract within the Department of Defense’s Active Devices Division. It is open for response until August 14, 2026, with the solicitation posted on August 3, 2026. Performance location details are unspecified, but the work is expected to support defense material handling and supply chain integrity. All deliverables must meet stringent compliance benchmarks to ensure workplace safety and regulatory alignment across DoD operations.

ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires independent inspection and testing services to guarantee zero non-conformances in defense components, adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans. The work involves rigorous quality assurance protocols to ensure every component meets exacting military standards before delivery, with no tolerance for defects or deviations. The scope is focused on supporting critical defense supply chains through precise, auditable inspection processes designed to eliminate failure risk at the source. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with a NAICS code of 541690 for other scientific and technical consulting services. The solicitation was posted on August 3, 2026, and responses must be submitted by September 3, 2026. While no specific location is provided for performance or contract administration, the work is expected to support defense components in a manner aligned with federal procurement requirements. Contractors must be prepared to demonstrate expertise in military quality standards and deliver verifiable results to maintain compliance throughout the contract period.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Supplier of Domestic Raw Materials (Steel, Alloy Wire)The contract seeks a supplier to provide U.S.-melted and U.S.-cast spring-grade steel or alloy wire with full traceability and certification compliant with both the Berry Amendment and the Buy American Act, ensuring all materials originate entirely within the United States. The product must meet stringent domestic content requirements to support defense-related applications, with documentation verifying the origin of raw materials through every stage of production. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, aligning with SBA regulations and the NAICS code 331221 for steel product manufacturing. Performance of the contract is required to occur in Phoenix, Arizona, with a response deadline of August 14, 2026, and the solicitation was posted on August 3, 2026. The contracting activity falls under the Department of Defense’s Fluid Handling Division, indicating the wire will support critical defense systems requiring high-performance, domestically sourced materials. Full compliance with federal acquisition regulations regarding origin, certification, and small business eligibility is mandatory, and interested vendors must submit proposals through the official DIBBS portal prior to the deadline to be considered.

Rolled Steel Shape Manufacturing

POSTED

about 17 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThis contract requires the implementation of NIST SP 800-171 controls to protect covered defense information in accordance with DFARS 252.204-7012, ensuring robust cybersecurity measures are in place to meet federal defense standards. The scope includes full compliance with access controls, audit and accountability mechanisms, configuration management, incident response procedures, and other critical security practices outlined in the NIST framework, with a mandatory requirement to report any cybersecurity incidents promptly and accurately. The work must be performed at a location in Phoenix, Arizona, under a small business set-aside classification, limiting eligibility to businesses certified as small by the SBA. The contract is structured as a subcontract under the Department of Defense’s Fluid Handling Division, solicited under NAICS code 541512 for other computer related services. Interested parties must respond by the deadline of August 14, 2026, and are expected to demonstrate proven experience in securing controlled unclassified information and managing cybersecurity compliance in defense environments. Performance will be evaluated based on technical capability to meet NIST and DFARS requirements, with emphasis on validated security controls, incident reporting protocols, and adherence to federal cybersecurity mandates without reliance on external documentation or third-party certifications not directly tied to the contract’s explicit obligations.

Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract encompasses the labeling, packaging, and documentation of hazardous materials used in the production of springs, requiring strict adherence to OSHA and Department of Defense safety and regulatory standards. All activities must be performed to ensure compliance with federal hazardous materials handling protocols, including accurate identification, proper containment, and complete recordkeeping to support safe transportation, storage, and use within the manufacturing process. The work is to be conducted at a facility located in Phoenix, Arizona, with the zip code 85043, and is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns as defined by the SBA are eligible to bid. The North American Industry Classification System code for this procurement is 541620, indicating it falls under scientific and technical consulting services. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with the contracting activity managed by the Fluid Handling Division of the Department of Defense.

Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

Helical Compression Spring ManufacturingThe contract calls for the manufacture of six helical compression springs in strict compliance with military specifications, encompassing all phases of production from material sourcing and heat treatment to final finishing and rigorous testing. Each spring must meet defined technical and performance criteria, and all work requires prior approval from the government engineering source to ensure conformance with applicable standards. The effort is classified as a subcontract under a Total Small Business Set-Aside, restricted to small businesses as defined by the SBA, and falls under NAICS code 332613 for spring manufacturing. The place of performance is designated as Phoenix, Arizona, with a zip code of 85043, and the contracting activity is managed by the Fluid Handling Division under the Department of Defense. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026.

Spring Manufacturing

POSTED

about 17 hours ago

DEADLINE

Domestic and International Transportation Logistics (Sea/Air)The contract pertains to domestic and international transportation logistics for an adapter, requiring traceable and compliant shipping via the fastest available method, with specific emphasis on utilizing U.S.-flag vessels when mandated by regulation. All shipping activities must include complete and accurate export documentation to ensure adherence to federal and international trade laws. The work is scoped under NAICS code 488510, which covers support activities for water transportation, and is classified as a subcontract under the Department of Defense’s Fluid Handling Division. The place of performance is listed as FPO with a zip code of 34085, indicating military postal service handling, and the solicitation was posted on August 3, 2026, with responses due by August 14, 2026. No set-aside provisions or organization type specifications are provided, and the contract is accessible through the DIBBS platform.

Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the execution of packaging, preservation, and labeling services in full compliance with MIL-STD-129 and DLA RP001 standards for shipments designated as FOB Destination. This subcontract, issued by the FLUID HANDLING DIVISION under the Department of Defense, mandates strict adherence to federal military specifications for the preparation of items destined for delivery, ensuring all packaging materials, preservation methods, and marking protocols meet established defense logistics requirements. The work must be performed to support the accurate identification, handling, and tracking of military cargo through the supply chain, with all labeling including necessary barcodes, data matrix codes, and standardized disposition information. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and is classified under NAICS code 561910 for other support activities for transportation. The place of performance is listed as FPO with a zip code of 34085, indicating potential delivery to overseas or military postal locations. No set-aside provisions are specified, and the contract is open to qualified subcontractors capable of fulfilling the technical and regulatory demands of military packaging and marking. All work must align with DLA’s procedural guidelines and ensure readiness for inspection and acceptance upon arrival at the final destination.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Precision Machined Adapter ManufacturingA single unit of a Straight Pipe-to-Hose Adapter with NSN 4730017084070 is being procured under a subcontract to meet stringent military specifications, requiring full manufacturing capabilities including precision machining, surface finishing, and rigorous quality inspection to ensure compliance with defense standards. The work must be performed in accordance with federal military requirements for durability, dimensional accuracy, and material integrity, with the place of performance designated as FPO, zip code 34085. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and falls under NAICS code 332994 for other fabricated metal product manufacturing. The contracting entity is the Fluid Handling Division of the Department of Defense, and the procurement is managed through the DIBBS platform with the link provided for official submission.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

FOB Origin Logistics and Delivery to Naval VesselThe contract requires coordination and execution of shipment from the origin point to the USS HYMAN G RICKOVER (SSN 795) located in Groton, Connecticut, under FOB Origin terms, meaning the buyer assumes all transportation risks and costs once the goods leave the seller’s location. All invoicing must comply with the Wide Area WorkFlow (WAWF) system to ensure proper documentation and payment processing within the Department of Defense framework. The logistics operation must be tailored to meet the specific delivery requirements of a naval vessel, emphasizing precision, security, and adherence to military protocols. This subcontract is categorized under NAICS code 484220, which pertains to truck transportation of freight excluding specialized commodities, indicating the likely use of ground transport for delivery. It was posted on August 3, 2026, with a response deadline of August 14, 2026, and is managed by the Fluid Handling Division under the Department of Defense. The place of performance is strictly defined as Groton, CT, with ZIP code 06340-4905, confirming the delivery destination. No set-aside provisions are specified, and the contract is accessible through the DIBBS platform for potential bidders seeking to fulfill the logistics obligation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Handling and Labeling ComplianceThe contract requires the identification and proper labeling of hazardous materials in accordance with OSHA’s Hazard Communication Standard, including the preparation of Material Safety Data Sheets to ensure all chemical hazards are accurately documented and communicated. Compliance with federal regulations governing the safe shipment of hazardous materials is mandatory, requiring adherence to transportation, storage, and handling protocols. The work is to be performed at the specified location in Groton, Connecticut, with a response deadline of August 14, 2026, and falls under the NAICS code 541620 for scientific research and development services. The contract is structured as a subcontract under the Department of Defense’s Fluid Handling Division, and all activities must align with federal safety and regulatory requirements to maintain operational and legal compliance.

Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

MIL-STD-129 Container Labeling and Marking ServicesThe contract requires the application of durable, compliant container markings in accordance with MIL-STD-129 standards, ensuring all packages are properly labeled with essential identifiers such as the National Stock Number, contract number, and shipment data. All markings must be produced using weather-resistant materials to withstand environmental exposure during transport and storage, maintaining legibility and compliance throughout the supply chain. The work is scoped as a subcontract under the Department of Defense’s Fluid Handling Division, with performance required at GROTON, CT, 06340-4905. The solicitation, posted on August 3, 2026, has a response deadline of August 14, 2026, and falls under NAICS code 323111, indicating printing and related support activities. The contract does not specify a set-aside type or point of contact, and interested parties must submit proposals through the DIBBS website using the provided RFQ link. Compliance with MIL-STD-129 is mandatory, and failure to meet labeling requirements could result in rejection of shipments or non-payment.

Commercial Printing (except Screen and Books)

POSTED

about 17 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract entails the preservation and packaging of government-furnished items in strict accordance with MIL-STD-2073-1E standards to ensure full protection during transportation and extended storage. This includes the selection of appropriate materials, adherence to prescribed procedures for surface treatment, wrapping, containerization, and labeling, as well as comprehensive documentation to verify compliance and traceability throughout the process. All work must meet military-grade requirements for environmental resilience, durability, and readiness, ensuring that items remain operational and undamaged under varying storage and transit conditions. The contract is a subcontract under the Department of Defense’s Fluid Handling Division, with work performance localized to Groton, Connecticut, in the 06340-4905 zip code. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026. It falls under NAICS code 332999, categorizing it as other fabricated metal product manufacturing, reflecting the specialized nature of custom packaging and preservation activities. Participation is open without a specific set-aside designation, and prospective bidders must navigate the procurement portal via the provided DIBBS link to submit proposals.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE