Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Safety Data Sheet (SDS) Preparation

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires identification of hazardous components within navigational lights and the preparation of Safety Data Sheets compliant with OSHA standards, ensuring all chemical and material risks are accurately documented and classified. The submitted SDS documents must align with federal regulatory requirements and be formally approved by relevant government authorities. Integration with MIL-STD-129 labeling standards is mandatory, ensuring that all hazardous materials are properly marked and coded for consistent identification, handling, and storage across defense logistics systems. This work supports safety, regulatory compliance, and operational readiness within Department of Defense environments. Performance is centered at the New Cumberland facility with a zip code of 17070-5002 and is classified under NAICS code 541620, indicating technical, scientific, or laboratory services related to environmental or safety compliance. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and is structured as a subcontract under the Department of Defense’s DDSP New Cumberland Facility. No set-aside provisions are specified, making it open to eligible subcontractors capable of meeting the rigorous technical and regulatory demands of defense-grade hazardous materials documentation and labeling.

General Info

Identify hazardous components in navigational lights, prepare OSHA-compliant SDS, and apply MIL-STD-129 labeling for DoD use.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identify hazardous components in navigational lights, prepare OSHA-compliant SDS/MSDS, and submit for government approval, including integration with MIL-STD-129 labeling.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & LabelingThis contract requires strict compliance with hazardous materials regulations, specifically enforcing 29 CFR 1910.1200 for hazard communication and MIL-STD-129 for uniform labeling of military materiel. A critical requirement is the verification that no mercury or mercury-containing components are present in any delivered items; if mercury cannot be entirely excluded, the contractor must implement robust containment measures and apply precise labeling to ensure safe handling and transport. The work is scoped as a subcontract under NAICS code 541620, indicating a focus on scientific and technical consulting services related to hazardous materials management. Performance is to be executed at FPO with a zip code of 09514, pointing to a military overseas location, and all deliverables must align with Department of Defense standards. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and is managed by the Defense Logistics Agency under the Department of Defense.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for all hazardous materials included in a motor parts kit, strictly adhering to OSHA and Department of Defense regulatory standards. All labeling and documentation must meet federal safety protocols to ensure proper handling, storage, and disposal of hazardous substances throughout the supply chain. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 541620 designates it as an environmental consulting and related services category, aligning with the technical and compliance expertise needed. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and the overseeing agency is the Department of Defense through its Maritime Supply Chain organization. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires the identification, labeling, and documentation of hazardous materials used in manufacturing or packaging processes under a subcontract arrangement. It is associated with the NAICS code 541620 and falls under the Department of Defense’s LAND SUPPLY CHAIN organization, indicating its relevance to defense supply chain operations. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, requiring timely submission of proposals that meet precise compliance standards for hazardous material management. The place of performance and point of contact details are not specified, suggesting the work may be conducted at multiple or undefined locations consistent with broader defense logistics requirements. All activities must align with federal regulations governing hazardous material handling to ensure safety, traceability, and regulatory adherence across the supply chain.

LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract titled Hazardous Materials Compliance and Documentation requires the preparation and ongoing maintenance of Safety Data Sheets for supplied hose or packaging products, ensuring full adherence to OSHA and federal hazardous materials regulations. All labeling associated with these materials must also meet current federal compliance standards to guarantee safe handling, storage, and transportation. The work is to be performed in San Diego, California, under the oversight of the Fluid Handling Division within the Department of Defense, with a response deadline of August 3, 2026. This is a subcontract opportunity classified under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental and safety compliance. Bidders must ensure their documentation processes are accurate, up to date, and fully aligned with regulatory requirements to support the Department of Defense’s operational safety protocols.

FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Hazardous Material Labeling and Compliance ServicesThe contract seeks services for the design and application of hazardous material labels that adhere to OSHA and MIL-STD-129R standards, ensuring full compliance with federal regulations for military logistics. This includes the accurate placement of GHS pictograms, generation and encoding of 2D barcodes, and seamless integration with defense logistics information systems to support tracking, inventory management, and safe handling throughout the supply chain. All labeling must meet stringent Department of Defense requirements for durability, readability, and data accuracy under operational conditions. Performance is centered at Tracy, California, with a 95304-5000 zip code designation, and the work is intended as a subcontract under NAICS code 541620, which pertains to management, scientific, and technical Consulting services. The solicitation was posted on July 22, 2026, with a response deadline of July 28, 2026, indicating a tight turnaround expectation for qualified vendors. The contracting activity falls under DLA Dist San Joaquin, a branch of the Department of Defense responsible for logistics and distribution, and the scope suggests a focus on high-volume, mission-critical labeling for defense assets requiring regulatory precision and system interoperability.

DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

Hazard Communication and SDS Compliance ServicesThe contract titled Hazard Communication and SDS Compliance Services requires full adherence to OSHA’s 29 CFR 1910.1200 regulations for hazardous material labeling, including the accurate preparation and application of hazard warning labels on all regulated substances. The scope encompasses the complete management of Safety Data Sheets, ensuring they are up to date, properly formatted, and submitted in compliance with federal requirements. This subcontract is issued under NAICS code 541620 by the Electrical Devices Division within the Department of Defense and is open for response until August 3, 2026, with proposals must be submitted through the specified DIBBS portal. The work is expected to be performed in support of federal operations, though no specific location is designated, and the contract does not include a set-aside designation.

ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract requires comprehensive hazard communication support for Department of Defense shipments, focusing on the preparation of safety data sheets, the design of hazard warning labels, and the verification of regulatory compliance with DoD standards. All deliverables must align with federal transportation and workplace safety regulations to ensure safe handling, storage, and transit of hazardous materials. The work is scoped to support military logistics operations and must be executed in accordance with the applicable requirements for hazardous material documentation and labeling. The contract is issued as a subcontract under the NAICS code 541620 for scientific and technical consulting services, with a response deadline of August 3, 2026. Performance is designated to take place in Bremerton, Washington, with a zip code of 98314-6001. The contract is managed under the Department of Defense through its Construction & Equipment MRO Service I procurement office, and all proposals must meet the specified compliance criteria to be considered. The opportunity is not subject to a set-aside classification, and interested parties must respond via the provided DIBBS portal before the deadline to be eligible for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Identification & LabelingThe contract requires the identification of hazardous materials within shipments and the accurate application of labels compliant with OSHA’s Hazard Communication Standard 29 CFR 1910.1200, ensuring all chemical hazards are properly communicated through standardized labeling practices. This includes the generation of Safety Data Sheets (SDS) and the pre-award submission of labels for review and approval, which are critical to meeting regulatory requirements before any materials are transported or handled. The work demands a thorough understanding of chemical classification, labeling criteria, and documentation procedures to ensure full compliance and safety across the supply chain. The contract is a subcontract under the NAICS code 541620, associated with environmental consulting services, and is issued by the Department of Defense through LSO COMBAT VEHICLES AND ARMAMENT. The place of performance is in Tampa, Florida, with a response deadline of August 3, 2026. Although the solicitation number and point of contact are not provided, the UI link directs to the DIBBS platform where full details may be accessed. The absence of a set-aside designation suggests the opportunity is open to all eligible contractors without preference, and all work must align with federal hazardous material handling standards applicable to defense-related logistics.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Identification and Safety Data ReportingThe contract requires the identification of all hazardous materials used in manufacturing or packaging processes, with full compliance to DFARS 252.223-3. This includes the generation of accurate Safety Data Sheets for each identified hazardous substance and the mandatory reporting of any hazardous materials not previously listed to the contracting officer without delay. The requirement applies to all stages of production and packaging, ensuring transparency and safety in alignment with Department of Defense regulations. All materials, regardless of volume or perceived risk, must be cataloged and documented to meet federal defense supply chain standards. Performance is tied to the location in Jacksonville, Florida, with a response deadline of July 30, 2026. The contract is structured as a subcontract under NAICS code 541620, indicating a focus on scientific and technical consulting services related to hazardous material management. It is administered by the Defense Logistics Agency under the Department of Defense, requiring strict adherence to federal compliance protocols. Failure to identify, document, or report unlisted hazardous materials could result in contract noncompliance and potential penalties.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of Safety Data Sheets, hazard warning labels, and all necessary regulatory compliance documentation for the SHA Reamer should it be classified as a hazardous material. This obligation ensures adherence to federal and international standards for handling, transporting, and storing potentially dangerous substances, with full documentation to support regulatory requirements across all stages of use. The work must be delivered in accordance with applicable regulations governing hazardous material identification and communication, with precision and timeliness being critical to meet compliance obligations. The solicitation is issued under the NAICS code 541620 for other scientific and technical consulting services and is categorized as a subcontract opportunity managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance is required at the designated location in NEW CUMBERLAND, Pennsylvania with a zip code of 17070-5002. The response deadline is August 3, 2026, and the opportunity was posted on July 22, 2026. No set-aside provisions are specified, and the contract is open to qualified subcontractors capable of delivering accurate, compliant documentation for hazardous materials classification and labeling.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

Sustainable Products Compliance (Environmental Standards)This contract requires strict adherence to FAR 52.223-23 to ensure all delivered products meet environmental standards for sustainability, focusing on the use of environmentally preferable materials and packaging. The subcontractor must verify and document compliance through detailed records that demonstrate procurement of materials and packaging aligned with federal sustainability guidelines, including life-cycle assessments, recycled content, and reduced environmental impact. Performance is tied to deliverables that explicitly reflect these criteria, with no flexibility for non-compliant alternatives. The opportunity is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at the location in NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. Classified under NAICS code 541620 for management consulting services, the contract is structured as a subcontract and has a response deadline of August 3, 2026. All submissions must be finalized by this date, and the solicitation remains open for participation without any set-aside designation. The contracting entity expects full transparency and traceability in sourcing and documentation to affirm environmental compliance throughout the supply chain.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & Documentation SupportThe contract requires the preparation and submission of Material Safety Data Sheets and hazard warning labels to ensure full compliance with the OSHA Hazard Communication Standard and DFARS 252.223-7006, focusing on accurate documentation and labeling of hazardous materials. All deliverables must align with federal regulations governing the safe handling, storage, and communication of chemical hazards, with an emphasis on timeliness, precision, and regulatory adherence. This subcontract is tied to the Department of Defense’s DDSP NEW CUMBERLAND FACILITY, with performance centered at the 17070-5002 location. The work falls under NAICS code 541620, indicating technical and scientific consulting services, and responses are due by August 3, 2026, following a posting date of July 22, 2026. The solicitation is accessible through the DIBBS platform, and successful offerors must demonstrate proven experience in hazardous materials documentation and regulatory compliance within defense-contracted environments.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Logistics, Transportation, and Destination DeliveryThe contract requires the secure transportation of structural steel plates using flatbed or heavy haul trucking to a designated DoDAAC destination at the New Cumberland facility, with a zip code of 17070-5002. All shipments must adhere to strict loading protocols to ensure cargo integrity and compliance with destination inspection standards, emphasizing safety and regulatory alignment throughout transit. The work falls under NAICS code 484220 for truck transportation of freight and is categorized as a subcontract with a response deadline of August 3, 2026, following a posting date of July 22, 2026. The contracting authority is the Department of Defense through its DDSP New Cumberland Facility, and performance is exclusively tied to the specified location, with no flexibility in delivery points.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of compliant packaging, preservation using method ZZ, and permanent marking of structural steel plates in accordance with military and ASTM standards, ensuring all components meet rigorous defense specifications for durability and traceability. Work must be performed to exact technical requirements that guarantee long-term integrity and identification of steel plates used in critical defense applications. The solicitation is categorized as a subcontract with a NAICS code of 332999 and is hosted by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance designated at the New Cumberland location, zip code 17070-5002. The posting date is July 22, 2026, and proposals must be submitted by August 3, 2026, with no set-aside provisions specified. Bidders are expected to demonstrate capacity to deliver compliant packaging and marking solutions aligned with federal defense logistics standards.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

High-Strength Structural Steel Plate Supply (Grade DH36)The contract calls for the supply of structural steel plates measuring 0.375 inches thick and 60 by 240 inches in dimensions, manufactured to Grade DH36 standards in accordance with ABS rules, ensuring high strength and durability for demanding structural applications. Each plate must be accompanied by full mill certification and must comply with applicable military specifications, verifying material integrity, traceability, and performance under operational conditions. The delivery location is specified as New Cumberland, Pennsylvania, with the place of performance tied to the DDSP New Cumberland Facility under the Department of Defense. The solicitation, posted on July 22, 2026, requires proposals to be submitted by August 3, 2026, and is classified as a subcontract under NAICS code 331221 for rolled structural metal product manufacturing. The contract is managed without any set-aside designation, opening participation to all qualified vendors. Bidders must ensure alignment with military-grade requirements and certified material documentation to meet the stringent quality and compliance standards expected by the Defense Logistics Agency. All responses must be submitted through the designated DIBBS platform using the provided solicitation number.

Rolled Steel Shape Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Air Conditioning Filter ElementsThe contract calls for the supply and delivery of 69 units of air conditioning filter elements identified by NSN 4130015956356, with strict compliance required to military and hazardous materials standards. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses per FAR 19.5, and falls under NAICS code 333415 for heating, air conditioning, and commercial refrigeration equipment manufacturing. The issuing organization is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with the place of performance located at New Cumberland, Pennsylvania, postal code 17070-5002. The opportunity was posted on July 22, 2026, and responses must be submitted by August 3, 2026, at 5:00 PM Eastern Time. Interested parties can access further details through the provided DIBBS portal link.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply Chain and Delivery Logistics (Non-Regulated Transport)The contract requires the transportation and final delivery of packaged soldering components to the DDSP New Cumberland facility in Pennsylvania with a zip code of 17070-5002, ensuring all logistics operations comply with WAWF-compliant documentation standards and include proper kitting services. This subcontract, classified under NAICS code 484220 for general freight trucking, focuses on non-regulated transport and involves end-to-end supply chain coordination to meet precise delivery specifications without the need for special regulatory handling. The solicitation was posted on July 22, 2026, with a deadline for responses set for August 3, 2026, and is managed by the Department of Defense through the DDSP New Cumberland Facility. The work must be performed at the designated delivery location in New Cumberland, PA, and all contractors are expected to adhere to strict documentation protocols to ensure traceability and compliance within the Department of Defense logistics framework. No set-aside classification is specified, and the contract is open to eligible subcontractors capable of meeting the technical and procedural requirements for secure, timely delivery of sensitive electronic components.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the packaging and labeling of soldering and desoldering tips in strict compliance with federal hazardous materials communication regulations, including OSHA HAZCOM, GHS, DLA RP001, and DFARS 252.223-7001. All labeling must adhere to standardized hazard communication protocols to ensure proper identification of chemical risks associated with the products, with packaging designed to maintain integrity and regulatory alignment throughout transit and storage. The work must be executed with precision to meet Department of Defense standards for safety, documentation, and traceability of hazardous substances used in or present on these tips. The solicitation is issued under NAICS code 561910 for other support activities and is classified as a subcontract opportunity with a response deadline of August 3, 2026. Performance is to be conducted at the DLA New Cumberland Facility, identified by zip code 17070-5002. The contracting entity is the Department of Defense through the DDSP New Cumberland Facility, and all deliverables must fully align with DLA and federal regulatory requirements to ensure compliance across the defense supply chain. Participation requires demonstrated expertise in hazardous materials handling and labeling, with an emphasis on consistency, accuracy, and adherence to mandated documentation procedures.

Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

Manufacture of Electric Soldering Tips (TIP, ELECTRIC SOLDER)The contract requires the fabrication of electric soldering tips to meet stringent military-grade standards for durability, electrical conductivity, and material safety, ensuring full compliance with DLA RA001 and DFARS 252.223-7001 regulations. These components are critical for defense-related applications and must be manufactured with precision using approved materials and processes that guarantee long-term performance under demanding operational conditions. The work is classified as a subcontract under NAICS code 332215, indicating specialized metal fabrication activities within the broader industrial sector. The solicitation was posted on July 22, 2026, with a response deadline set for August 3, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the DDSP New Cumberland Facility under the Department of Defense, indicating a direct alignment with defense logistics and supply chain requirements. While no set-aside provisions or point of contact details are specified, the inclusion of federal regulatory frameworks underscores the strict adherence to compliance, quality control, and supply chain integrity expected from the vendor. All deliverables must meet unambiguous military specifications to ensure interoperability and reliability in critical defense systems.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 18 hours ago

DEADLINE

Manufacture of Desoldering Tips (TIP, SUCTION DEVICE)The contract requires the manufacture of precision desoldering tips that fully comply with the DLA Master List RA001 specifications, ensuring strict adherence to performance and quality standards. Production must meet rigorous requirements for thermal resistance, material composition, and dimensional accuracy, with comprehensive quality control and testing protocols applied at every stage to guarantee reliability and consistency. The delivered products must be suitable for use in defense and aerospace applications where precision and durability are critical. The solicitation, titled Manufacture of Desoldering Tips TIP, SUCTION DEVICE, was posted on July 22, 2026, with a response deadline of August 3, 2026, and is classified as a subcontract under NAICS code 332215. The contracting activity is the DDSP NEW CUMBERLAND FACILITY, under the Department of Defense, with performance exclusively located at the New Cumberland facility in Pennsylvania, zip code 17070-5002. All bids must be submitted through the DIBBS system using the provided solicitation link, and bidders are expected to demonstrate proven capability in producing high-precision metallurgical components meeting military-grade specifications.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 18 hours ago

DEADLINE

Transportation & Freight Logistics (FOB Origin to DLA New Cumberland)The contract requires the transportation of 70 units from the manufacturer to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB origin terms, meaning the buyer assumes all transportation risks and costs once the goods leave the supplier’s location. Full logistics execution must include comprehensive freight documentation, real-time delivery tracking, and invoicing compliant with the Web-Enabled Acquisition and Financial System, ensuring seamless integration with federal financial and supply chain processes. The contractor is responsible for end-to-end coordination to guarantee timely, accurate, and auditable delivery to the specified destination. The solicitation, issued under NAICS code 484220 for truck transportation, is classified as a subcontract and was posted on July 22, 2026, with responses due by August 3, 2026. The performance location is clearly identified as 17070-5002 in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. Although no specific set-aside or point of contact is provided, interested parties must submit responses through the designated DIBBS portal prior to the deadline to be considered for award.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Specialized Packaging and Military-Compliant Labeling ServicesThe contract requires specialized packaging, preservation, and labeling services that fully comply with MIL-STD-2073-1E for defense shipments, ensuring all items are properly protected against environmental and physical damage during transit and storage. This includes the application of MIL-STD-129 compliant labeling with precise consignee markings and mandatory hazardous material warnings to meet U.S. Department of Defense regulatory standards. All work must be executed to ensure traceability, safety, and readiness for military logistics operations. The solicitation is issued as a subcontract under the NAICS code 325998, with a response deadline of August 3, 2026, and performance will be centered at the New Cumberland facility with a zip code of 17070-5002. The contracting authority is the Department of Defense through the DDSP New Cumberland Facility, and the work is critical to supporting defense supply chain integrity by ensuring all packaging and labeling meet exacting federal specifications for hazard communication and item identification.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 18 hours ago

DEADLINE

Manufacture of Navigational Lights (Prime-Level Assembly & Testing)The contract requires the full manufacturing, assembly, quality control, and testing of 70 units of the GLAMOX AQUA SIGNAL CORPORATION model 34000-7 navigational lights, all to be produced in strict accordance with military specifications. This includes adherence to MIL-STD standards for packaging and labeling to ensure compliance with Department of Defense requirements. The work is classified as a subcontract with the NAICS code 336413, indicating specialized manufacturing of marine and aerospace lighting systems. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting activity is managed under the DDSP NEW CUMBERLAND FACILITY, a unit of the Department of Defense. All deliverables must be completed and submitted by the response deadline of August 3, 2026, following a solicitation posted on July 22, 2026. There is no set-aside designation specified, and the contract does not indicate a prime contractor or point of contact detail.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Jewelers’ Lathe (NSN 3416008409717)The contract requires the procurement, packaging, marking, and delivery of three units of a Jewelers’ Lathe identified by NSN 3416008409717, with all work to be performed in full compliance with military packaging, labeling, and identification standards. Delivery is to be made under FOB origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s facility. The equipment must meet all applicable military specifications for functionality, durability, and documentation to ensure compatibility within defense supply chains. The solicitation is issued as a subcontract under the NAICS code 333517, indicating the nature of the work falls within precision instrument and equipment manufacturing. The opportunity was posted on July 22, 2026, with responses due by August 3, 2026, and is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the deliverables will be received or inspected. Although no point of contact or solicitation number is provided, the official link to the DIBBS platform is included for further details. The contract does not specify a set-aside designation, suggesting it is open to all eligible suppliers without preferential classification.

Machine Tool Manufacturing

POSTED

about 18 hours ago

DEADLINE