Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & SDS Management

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a subcontractor to provide comprehensive regulatory compliance support for hazardous materials, focusing on the preparation and maintenance of Safety Data Sheets (SDS), accurate hazard labeling, and adherence to OSHA and Department of Defense requirements. The scope of work requires ongoing expertise in identifying, classifying, and documenting hazardous substances to ensure all materials used or handled within DoD operations remain compliant with federal safety and environmental regulations. The subcontractor must demonstrate knowledge of current OSHA HazCom standards and DoD-specific protocols, with the ability to adapt to evolving regulatory frameworks and support audit readiness across all relevant operations. Performance of this contract is to be conducted at APO, 09309-9998, with all deliverables expected to support the Maritime Supply Chain ESOC Buys division under the Department of Defense. The solicitation was posted on July 29, 2026, and offers must be submitted by August 10, 2026, under the NAICS code 541620 for Management, Scientific, and Technical Consulting Services. While no set-aside designation is specified, qualified businesses must be prepared to fulfill DoD compliance obligations in a timely and accurate manner, including documentation, training support, and response to regulatory inspections.

General Info

Subcontractor to provide HazCom and SDS support for DoD hazardous materials at APO per OSHA and DoD regulations.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

APO, AE, 09309-9998, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide regulatory compliance support for hazardous materials, including SDS preparation, hazard labeling, and ongoing compliance with OSHA and DoD requirements.

Similar Contracts

Same NAICS industry code

Forestry and Parks - Request for Proposal - Water & Wastewater Systems Professional Consulting Services - Provincial Water and Wastewater Regulatory Requirements Throughout the Province

Solicitation # AB-2026-05394

Alberta Parks is seeking qualified consultants to conduct a comprehensive province-wide assessment of its potable water and wastewater systems to ensure full compliance with provincial regulatory requirements under the Environmental Protection and Enhancement Act, the Water Act, Public Health Act drinking-water standards, and other directives from Alberta Environment and Protected Areas. These systems, used across seasonal and year-round recreational facilities, vary widely in size, configuration, and operational cycles, leading to inconsistent monitoring, reporting, and compliance tracking due to differing regional practices and high seasonal staff turnover. The absence of standardized processes has hindered Alberta Parks’ ability to reliably verify compliance, detect gaps, and implement consistent improvements across regions. To resolve this, the project will identify all regulatory obligations for each facility, evaluate current adherence, and provide actionable recommendations to close compliance gaps. The outcome will include a standardized Regulatory Compliance Key Performance Indicator Matrix and a centralized annual dashboard to visually display regional performance, enabling assured, annual confirmation that all water and wastewater compliance obligations are consistently met across the province. The solicitation, AB-2026-05394, is open for proposals until August 31, 2026, with Shaun Polley, Project Manager, serving as the primary point of contact.

Forestry and Parks

POSTED

DEADLINE

in about 1 month

Stormwater Drainage Inspection and AssessmentThe contract involves the comprehensive inspection and assessment of stormwater drainage systems to ensure proper functionality and long-term reliability. Contractors are required to perform both visual and structural evaluations, utilizing advanced technologies such as CCTV and sonar to detect blockages, signs of deterioration, and design flaws within the drainage infrastructure. These inspections are critical for identifying issues that could lead to flooding, erosion, or system failure, and must be executed with precision to support maintenance and repair planning. This subcontract is issued by the Georgia Department of Transportation with a solicitation response deadline of August 25, 2026, and falls under NAICS code 541620, which corresponds to environmental consulting services. The work is expected to be performed across various locations within Georgia, though specific sites are not detailed in the provided data. The contract is open to qualified subcontractors capable of delivering technical inspection services, with no set-aside provisions indicated. All proposals must be submitted by the stated deadline through the official portal linked in the contract posting.

Department of Transportation

POSTED

DEADLINE

Airport Master Planning & Environmental ComplianceThe contract seeks qualified firms to develop comprehensive airport master plans, including airport layout plans, environmental assessments, noise compatibility studies, and land use planning initiatives, all in support of airport development and regulatory compliance. The scope of work requires detailed technical expertise to ensure alignment with federal and state aviation standards, public safety requirements, and environmental regulations, with deliverables designed to facilitate long-term infrastructure planning and community integration. All tasks must be executed with precision to support the Georgia-based Early County Government’s objectives for sustainable aviation growth and environmental stewardship. Subcontractors must submit proposals by August 28, 2026, under a solicitation linked to the Georgia Department of Administrative Services’ procurement system. The contract is classified under NAICS code 541620 for environmental consulting services and is structured as a subcontract, indicating it will be awarded to a firm working under a prime contractor or larger project framework. While specific location details are not provided, performance is expected to focus on airport facilities within Early County, Georgia, requiring on-site analysis, stakeholder coordination, and adherence to regional planning priorities. The procurement is managed through the state’s official government procurement portal, and interested parties must ensure full compliance with submission guidelines and deadlines to be considered.

Early County Government

POSTED

DEADLINE

Environmental Compliance and Site Inspection SupportThe contract involves providing pre-demolition environmental screening and compliance support for public infrastructure projects within regulated right-of-way areas, with specific focus on asbestos assessment and stormwater management controls. This work is critical to ensure regulatory adherence before any demolition activities commence, safeguarding public health and environmental integrity by identifying hazardous materials and implementing proper containment and runoff prevention measures. The services required are technical and compliance-oriented, falling under NAICS code 541620, which covers environmental consulting services. The opportunity is structured as a subcontract under the Georgia Department of Transportation, with a response deadline of August 7, 2026, and was posted on July 29, 2026. While specific performance locations are not detailed in the data, the work is expected to take place across state-managed infrastructure sites within Georgia. The procurement does not specify a set-aside classification, and no point of contact information is provided, requiring interested parties to refer to the official online portal for further details and submission requirements.

Department of Transportation

POSTED

DEADLINE

Recovered Materials Procurement SupportThe contract titled Recovered Materials Procurement Support requires the provision of advisory services and operational support to ensure the procurement of recovered materials complies with Environmental Protection Agency regulations and Resource Conservation and Recovery Act requirements. This subcontract is part of an initiative by the Massachusetts agency COCC1 - Finance & Procurement to align material acquisition practices with federal environmental standards, emphasizing sustainable sourcing and proper handling of recycled content. The work is to be performed at Moody Street in Lowell, Massachusetts, with a deadline for responses set for August 28, 2026, and the solicitation was posted on July 29, 2026. The North American Industry Classification System code 541620 indicates that the services fall under environmental consulting, specifically targeting technical guidance on compliance, documentation, and procurement processes tied to waste and material recovery. The contract does not specify a set-aside status or type, nor does it identify a point of contact or detailed performance metrics, but it implies a need for specialized expertise in navigating federal environmental regulations within procurement workflows. Contractors are expected to have experience in regulatory adherence for recovered materials, including tracking, reporting, and validation under RCRA, and must deliver services that integrate seamlessly with the agency’s broader sustainability and fiscal oversight objectives. The absence of a solicitation number and organizational details suggests a streamlined internal or state-led procurement process, with the primary focus on legal and operational compliance rather than competitive bidding parameters.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Energy Efficiency Compliance ServicesThe contract requires adherence to state-mandated energy conservation standards as defined by federal and Massachusetts regulations, ensuring all materials and equipment supplied or installed meet the required efficiency criteria. Work is to be performed at Moody Street in Lowell, with a strict deadline for response submission on August 28, 2026, and the contract is structured as a subcontract under NAICS Code 541620, indicating professional, scientific, and technical services related to energy efficiency compliance. The contracting entity is the Massachusetts Finance & Procurement division, underscoring the public sector nature of the obligation and the necessity for strict regulatory alignment. There is no set-aside designation specified, and the place of performance is localized to a specific address in Lowell, requiring on-site coordination and verification of compliance.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation is a subcontract issued by the San Diego Unified School District under NAICS code 541620, targeting services related to the assessment, monitoring, and mitigation of environmental impacts tied to construction activities or site operations within San Diego, California, specifically in the 92124 ZIP code area. The solicitation was posted on July 29, 2026, with a firm response deadline of August 20, 2026, requiring proposers to demonstrate technical capability in identifying environmental risks, implementing regulatory compliance protocols, and executing remediation measures in alignment with applicable state and federal standards. The performance location is fixed at the designated site in San Diego, and while details on set-aside status or point of contact are not provided, the scope requires specialized environmental consulting services to support safe and lawful development activities under the district’s authority.

San Diego Unified School District

POSTED

DEADLINE

Environmental Compliance and Monitoring ServicesThe contract is for Environmental Compliance and Monitoring Services through a subcontract under the Imperial Irrigation District in California, specifically focused on the development and implementation of updated dust control and stormwater pollution prevention plans to ensure adherence to regulatory requirements. The scope includes creating comprehensive plans tailored to the site in Calipatria, with ongoing monitoring activities to verify compliance, identify potential environmental impacts, and implement corrective actions as needed. This work is critical to maintaining environmental integrity at the location and aligning with applicable state and federal environmental standards. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is classified under NAICS code 541620 for environmental consulting services. The place of performance is clearly defined as Calipatria, California, with a zip code of 92233, indicating the specific operational area. Although the type of set aside is not specified, the subcontract nature implies participation through a secondary contractor supporting the primary project execution. All deliverables must be completed in alignment with regulatory expectations, maintaining detailed records, and ensuring continuous compliance throughout the project lifecycle.

Imperial Irrigation District

POSTED

DEADLINE

Hazard Communication & Safety Data Sheet (SDS) ComplianceThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets (SDS) for all hazardous materials used in manufacturing or packaging operations, ensuring full compliance with OSHA’s Hazard Communication Standard. All documentation must accurately reflect the identities, hazards, and safety precautions associated with the chemicals involved, and must be formatted and presented in accordance with regulatory requirements to support workplace safety and legal adherence. The scope centers on delivering complete, up-to-date, and verified SDS documentation and corresponding labels that align with current federal safety mandates. This is a subcontract under the NAICS code 541620, issued by the Department of Defense through its LAND SUPPLY CHAIN office, with the place of performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. The contract is not subject to any set-aside classifications, and interested parties must submit their proposals through the DIBBS platform using the provided UI link. Timing and accuracy in delivery are critical, as compliance directly impacts the safe handling and transportation of hazardous materials across defense-related supply chains.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance and Safety DataThe contract requires strict adherence to hazardous materials compliance through the accurate authoring of safety data sheets, proper labeling, and comprehensive documentation in alignment with DFARS and OSHA HAZCOM standards. This subcontract underscores the need for precise and regulatory-compliant handling of hazardous substances within the defense supply chain, ensuring all materials are properly identified, communicated, and managed to protect personnel and meet federal requirements. The work must be executed with attention to detail and full synchronization with current safety protocols to maintain operational integrity and legal compliance. The solicitation, issued under NAICS code 541620 by the Department of Defense's Aviation Supply Chain ESOc Buys, opens for responses on July 29, 2026, with a firm deadline of August 6, 2026. All deliverables must be submitted through the DIBBS platform, and there is no designated set-aside designation or geographic restriction specified. Performance location and point of contact details are not provided, implying flexibility in execution but demanding full regulatory accountability from the subcontractor regardless of operational location.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract requires written notification and comprehensive compliance documentation for any item containing radioactive materials that exceed the thresholds outlined in 10 CFR 71.3. This obligation applies to all deliverables under the subcontract and demands strict adherence to federal regulations governing the handling, labeling, and reporting of radioactive substances. The contractor must ensure that all relevant technical and regulatory information is meticulously documented and submitted timely to demonstrate full alignment with safety and compliance standards. The solicitation is classified under NAICS code 541620 and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. Performance is required at the location in Dickson, Tennessee, with a zip code of 37055-0248. The response deadline is August 10, 2026, and the opportunity was posted on July 29, 2026. While no set-aside designation or point of contact is specified, interested parties must respond through the provided DIBBS portal before the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Radioactive Materials Notification & Labeling ComplianceThe contract requires the assessment of materials for radioactive content to ensure compliance with federal standards, including the mandatory notification of government authorities if any detected levels exceed established thresholds. This obligation applies to all materials under the scope of the agreement, and failure to identify or report such contaminants could result in noncompliance penalties. The contractor must also implement proper labeling of all affected items in strict accordance with MIL-STD-129, ensuring that radioactive or potentially contaminated materials are clearly and accurately marked for safe handling, storage, and transport throughout the supply chain. The work is to be performed at Hill AFB, Utah, and the contract is structured as a subcontract under the Department of Defense with a NAICS code of 541620, indicating it falls under engineering services for scientific and technical consulting. Responses are due by August 6, 2026, with the solicitation posted on July 29, 2026, and the performance location designated as a key military installation requiring stringent safety and regulatory adherence.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Hazardous Materials Compliance and SDS ManagementThe contract requires comprehensive management of hazardous materials including identification, preparation of safety data sheets, and strict adherence to OSHA and DFARS regulations for all shipments. The work demands thorough understanding of federal safety and defense supply chain standards to ensure materials are properly classified, documented, and transported in full compliance with applicable laws. All activities must align with the Department of Defense’s maritime supply chain requirements as managed by the MARITIME SUPPLY CHAIN ESOC BUYS division, with performance expected to meet rigorous federal procurement standards. The solicitation is classified as a subcontract under NAICS code 541690, indicating a focus on other scientific and technical consulting services related to environmental and safety compliance. Respondents must submit their proposals by August 10, 2026, with no set-aside provisions specified. The contract does not designate a specific place of performance or point of contact, suggesting the work may be performed remotely or across multiple locations as needed to support defense logistics. All documentation and compliance measures must be maintained to support audit readiness and regulatory inspection by federal authorities.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

International Freight and Ocean Transport LogisticsThe contract seeks a subcontractor to arrange international ocean freight transport from U.S. origins to France, requiring strict adherence to Department of Defense and Maritime Administration regulations. The scope centers on end-to-end logistics management for government-related shipments, ensuring compliance with all applicable security, documentation, and operational standards mandated by U.S. federal authorities. Transportation must be executed reliably and in full alignment with defense supply chain protocols to support governmental movements between U.S. ports and French destinations. Issued under NAICS code 483111 for ocean freight transportation, the solicitation is managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The response deadline is August 10, 2026, and interested parties must submit proposals through the DIBBS platform prior to that date. While the contract does not specify a set-aside classification, it is formally designated as a subcontract, indicating integration into a larger procurement structure. Performance obligations will require proven capability in handling sensitive cargo, regulatory documentation, and international transit protocols under DoD and MARAD guidelines.

Deep Sea Freight Transportation

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requests specialized packaging, preservation, and labeling services for defense-related shipments in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all materials meet rigorous military specifications for durability, traceability, and environmental protection during transit and storage. The work is classified as a subcontract under NAICS code 493190 and is being managed by the Department of Defense through the Maritime Supply Chain ESOC Buys division, with performance expected to support critical logistics operations across defense supply chains. Proposals must be submitted by August 10, 2026, with the solicitation publicly listed under the DIBBS platform as SPE7M026T023G, though no set-aside preferences or specific geographic performance locations are identified. Contractors are expected to demonstrate proven capability in executing military-compliant packaging procedures, including proper material selection, preservation techniques, and barcode and label formatting as mandated by federal standards, without additional detail on contract value, duration, or delivery schedules being provided.

Other Warehousing and Storage

POSTED

DEADLINE

Electrical Connector Supply (NSN 5935-00-093-1054)The contract pertains to the supply of ten units of a military-specification electric plug connector identified by NSN 5935-00-093-1054, a commercial off-the-shelf component designed to meet defense-grade standards. This subcontract is issued under the Department of Defense through the Maritime Supply Chain ESOC Buys office, with the NAICS code 334417 indicating classification within the electronic component manufacturing sector. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, establishing a clear timeline for vendor submissions. Although no specific point of contact or performance location has been provided, the requirement is for delivery to a DOD-affiliated site, consistent with the nature of military logistics. The connector must satisfy all applicable military specifications despite being a COTS item, ensuring compatibility and reliability in operational environments.

Electronic Connector Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance & CUI SafeguardingThe contract requires the implementation and thorough documentation of NIST Special Publication 800-171 controls to safeguard Controlled Unclassified Information (CUI) within a Department of Defense environment. This includes developing a System Security Plan (SSP) that accurately reflects the security posture, controls in place, and risk mitigation strategies aligned with NIST standards. The contractor must ensure all systems handling CUI are fully compliant with the required cybersecurity framework, addressing technical, administrative, and physical safeguards as outlined in the publication. Additionally, the contractor is responsible for establishing and maintaining procedures for timely cyber incident reporting in accordance with federal requirements, ensuring rapid response and transparency in the event of a breach or anomaly. The work is scoped as a subcontract under the MARITIME SUPPLY CHAIN ESOC BUYS with performance centered at FPO, zip 96632, and is classified under NAICS code 541512 for computer systems design services. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, indicating a limited window for proposal submission. Compliance with these requirements is essential for maintaining the integrity and confidentiality of CUI, and failure to meet the specified controls or reporting obligations may result in contract non-compliance or termination. All activities must be conducted in alignment with Department of Defense cybersecurity policies and procedures, with documentation maintained to support audits and assessments.

Computer Systems Design Services

POSTED

DEADLINE

Military Logistics & Packaging ComplianceThe contract requires strict adherence to military packaging and logistics standards including MIL-STD-129, ASTM D3951, FED-STD-313, and DLA-specific requirements to ensure all delivered items are properly packaged, marked, barcoded, and staged for shipment. Compliance with these specifications is mandatory to meet the Department of Defense’s logistical integrity and operational readiness standards. The work must be performed at the designated place of performance in FPO with ZIP code 96632, and all activities must align with the Maritime Supply Chain ESOC Buys organization under the Department of Defense. This is a subcontract solicitation with a response deadline of August 10, 2026, and was posted on July 29, 2026. The North American Industry Classification System code is 493110, indicating it pertains to warehousing and storage services. There is no set-aside designation provided, and the contract is open to qualified subcontractors capable of fulfilling stringent defense logistics protocols. All parties must ensure full compliance with documentation, labeling, and handling procedures to avoid rejection or delays in the military supply chain.

General Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks services for the provision of hazard warning labels and Material Safety Data Sheets (MSDS) that meet strict regulatory standards under OSHA, FIFRA, FDCA, and DFARS for any hazardous components used in defense-related supply chains. Compliance with these federal regulations is mandatory to ensure accurate identification, handling, storage, and disposal of hazardous materials across military and contractor operations. The work must adhere to all applicable requirements for content, formatting, language, and distribution, with particular attention to consistency and traceability in documentation for hazardous substances. This is a subcontract opportunity under the NAICS code 541690, issued by the Department of Defense through its MARITIME SUPPLY CHAIN ESOC BUYS office, with performance required at FPO, ZIP 96632. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. Although set-aside details are not specified, the nature of the requirements indicates a need for qualified providers with demonstrated expertise in regulatory compliance for hazardous materials, particularly within the defense industrial base. Subcontractors must be prepared to support mission-critical logistics while maintaining full accountability for labeling and documentation accuracy throughout the supply chain.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Electrical Connector Backshell SupplyThe contract calls for the supply of one military-spec electrical connector backshell identified by NSN 5935998736012, requiring strict adherence to form, fit, function, packaging, labeling, and delivery standards as mandated for defense applications. This is a subcontract under the Department of Defense’s Maritime Supply Chain ESOCL Buys division, with the performance location designated as FPO, ZIP 96632, indicating a forward-operating or at-sea logistical context. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and is classified under NAICS code 335931, which pertains to other electrical equipment and component manufacturing. All deliverables must meet defense-grade reliability and traceability requirements, ensuring seamless integration into military systems without deviation in specifications or documentation.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Logistics & Shipment CoordinationThe contract requires the timely coordination of the final shipment of 40 pipe plug units within 30 days of award, with strict adherence to WAWF compliance, origin inspection protocols, and MIL-STD-129 barcoding requirements to ensure full traceability and military logistics standards are met. All activities must align with Department of Defense procurement procedures and be executed with precision to support operational readiness. This is a subcontract under the Maritime Supply Chain ESOC Buys office of the Department of Defense, classified under NAICS code 484220 for truck transportation and related services. The solicitation was posted on July 29, 2026, with a response deadline of August 31, 2026, and the performance location and primary point of contact are unspecified, indicating that details may be provided upon award. The contract emphasizes end-to-end logistics coordination with no flexibility on compliance elements tied to federal military shipping standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 1 month

Hazardous Materials Compliance & LabelingThe contract requires the identification, documentation, and proper labeling of all hazardous materials utilized in manufacturing or packaging processes, with strict adherence to OSHA’s Hazard Communication Standard and DFARS regulatory requirements. This includes the accurate preparation and maintenance of Safety Data Sheets to ensure full compliance and transparency across the supply chain. The work must be executed under a subcontract arrangement, targeting technical and compliance support services within the defense sector, specifically aligned with the Department of Defense’s Maritime Supply Chain ESOC Buys program. Performance is expected to meet federal standards for hazardous material handling, with all activities tied to the NAICS code 541690, indicating specialized scientific and technical consulting services. The solicitation was posted on July 29, 2026, with a firm response deadline of August 31, 2026, and no set-aside provisions are specified, leaving eligibility open to qualified subcontractors regardless of business size or ownership classification.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 1 month

Packaging, Preservation & Marking ServicesThe contract requires the provision of packaging, preservation, and marking services for pipe plugs in full compliance with military standards, specifically utilizing corrosion-inhibiting techniques to ensure long-term integrity during storage and transit. All items must be prepared according to MIL-STD-129 specifications for labeling, ensuring standardized identification, tracking, and handling throughout the defense supply chain. The work involves safeguarding components against environmental degradation through approved preservation methods and applying precise, durable markings that meet Department of Defense requirements for traceability and operational readiness. This is a subcontract opportunity under the NAICS code 493190, issued by the Maritime Supply Chain ESOC Buys division of the Department of Defense, with a response deadline of August 31, 2026. The performance location and specific delivery details are not specified, but adherence to military compliance standards is mandatory for all deliverables. The contract is focused on enabling secure, standardized logistics for defense-related shipments, requiring expertise in military packaging protocols and corrosion control for metallic components used in critical systems.

Other Warehousing and Storage

POSTED

DEADLINE

in about 1 month

Precision Metal Fabrication – Pipe Plug ManufacturingThe contract calls for the manufacture of 40 high-precision pipe plugs to meet strict military specifications established by the Department of Defense, specifically under the MARITIME SUPPLY CHAIN ESOC BUYS initiative. Each component must adhere to exacting standards for material composition, dimensional tolerances, and mechanical integrity, as these pipe plugs are intended for critical applications where failure is not an option. Compliance with all relevant military technical requirements is mandatory, and full certification documentation must be provided to verify conformity, including material test reports and quality assurance records for traceability and audit purposes. The subcontract is open for bids with a response deadline of August 31, 2026, and was posted on July 29, 2026, under the NAICS code 332996 for other fabricated metal product manufacturing. Performance is expected to support defense maritime operations, though the exact location of delivery or use is unspecified. Bidders must be prepared to demonstrate capability in precision metal fabrication, certified quality control processes, and experience producing components for government or military use. All submissions must be made through the designated DIBBS portal, and no set-aside preferences are indicated for small or disadvantaged businesses.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

in about 1 month