Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and SDS Management

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires comprehensive identification, handling, and documentation of hazardous materials in full compliance with federal and military regulations, with a primary focus on the accurate submission of Safety Data Sheets. The work is centered at NEW CUMBERLAND, Pennsylvania, and mandates strict adherence to established safety protocols to ensure the proper management of dangerous substances throughout their lifecycle. The contractor must maintain meticulous records and demonstrate consistent alignment with the applicable standards governing hazardous material handling within defense operations. The contract is classified as a subcontract under NAICS code 541620, indicating it falls within the scope of scientific and technical consulting services. It was posted on July 28, 2026, with a response deadline of August 5, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. While no set-aside designation has been indicated, all proposals must meet the technical and regulatory expectations outlined by military authorities, and performance must be delivered to support the operational readiness and safety compliance of the defense supply chain.

General Info

Handle hazardous materials at NEW CUMBERLAND, PA, with strict SDS compliance and military safety standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identification, handling, and documentation of hazardous materials, including submission of Safety Data Sheets (SDS) per federal and military standards.

Similar Contracts

Same NAICS industry code

Environmental Compliance & Indoor Air Quality TestingThis contract encompasses environmental compliance and indoor air quality testing services including radon testing, formaldehyde monitoring, asbestos and lead abatement, and the preparation of environmental clearance reports in accordance with established safety standards. The work is scoped to ensure the identification, mitigation, and documentation of hazardous materials within facilities, with a focus on protecting occupant health and regulatory adherence. All activities must be conducted under strict protocols to meet federal and industry-specific requirements for environmental remediation and air quality verification. The contract is classified as a subcontract under NAICS code 541620, indicating it involves environmental consulting and related services. It was posted on July 29, 2026, with a response deadline of August 30, 2026, and is being administered by the Department of Defense through its W2SD Endist New York entity. Performance is expected to occur at a location identified by the ZIP code 39855, though specific address details are not provided. The subcontract is part of a broader effort to maintain compliance with environmental safety mandates across DoD facilities, requiring qualified vendors to deliver accurate testing results and formal documentation to confirm clearance of hazards before occupancy or use.

W2SD Endist New York

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Environmental Compliance TestingThe contract titled Environmental Compliance Testing involves comprehensive testing and oversight for asbestos, radon, and formaldehyde emissions across federal facilities to ensure adherence to EPA, OSHA, and other federal regulatory standards. The work requires specialized expertise in environmental sampling, monitoring, and abatement procedures, with an emphasis on protecting worker and public health in accordance with stringent federal guidelines. The services are critical for maintaining compliance and mitigating hazardous exposure risks in government-owned or -operated buildings. This is a subcontract under NAICS code 541620, issued by the Department of Defense through the W071 Endist Seattle office, with performance specifically targeted at East Wenatchee. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026. Although no set-aside classification is specified, the contract is intended for qualified subcontractors capable of delivering technical environmental services under federal oversight. The absence of a point of contact and detailed location information suggests that further details will be provided during the subcontracting process.

W071 Endist Seattle

POSTED

about 10 hours ago

DEADLINE

Sustainable Product Compliance & Certification SupportThe contract seeks documentation and certification services to verify that supplied products comply with federal sustainability standards, specifically including BioPreferred®, Energy Star, and EPA SNAP programs. This subcontract is set aside for Service-Disabled Veteran-Owned Small Businesses and falls under NAICS code 541620, which relates to administrative management and general management consulting services. The opportunity was posted on July 29, 2026, with a response deadline of July 31, 2026, indicating a narrow window for submission. The awarding agency is the Department of Veterans Affairs through the 262-NETWORK Contract Office 22, though specific performance location and point of contact details are not provided. The contractor must ensure all products meet rigorous federal sustainability criteria and deliver verifiable certifications to support compliance.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 10 hours ago

DEADLINE

Environmental Compliance and Monitoring SupportThe contract calls for environmental oversight services during debris removal operations, focusing on turbidity monitoring, erosion control measures, and compliance with regulatory reporting requirements. The work is scheduled to take place in Buckhorn, Kentucky, with the primary objective of minimizing environmental impact through active monitoring and implementation of best management practices. All activities must align with applicable environmental regulations and ensure that water quality and surrounding ecosystems are protected throughout the duration of the operations. This is a subcontract under the NAICS code 541620, which pertains to environmental consulting services, and is issued by the Department of Defense through the W072 Endist Louisville office. Responses are due by August 12, 2026, and the opportunity was posted on July 29, 2026. The contract does not specify a set-aside type and contains no point of contact information, requiring potential offerors to access the full solicitation through the provided SAM.gov link for additional details and submission instructions.

W072 Endist Louisville

POSTED

about 10 hours ago

DEADLINE

Dive Support and Underwater OperationsThe contract seeks certified dive teams and surface-supplied diving support to locate and retrieve submerged debris from deep-water reef environments, requiring specialized operations in challenging marine conditions. Teams must be qualified to conduct NITROX gas mixing and provide comprehensive safety oversight throughout all phases of the mission, ensuring compliance with underwater operational standards and environmental preservation protocols. The work is critical for marine ecosystem recovery and involves high-risk diving activities that demand proven expertise, robust safety procedures, and equipment capable of operating at significant depths. This subcontract is awarded by the Florida Fish and Wildlife Conservation Commission under NAICS code 541620, with a response deadline of August 18, 2026. The procurement does not specify a set-aside classification or detailed place of performance beyond the general context of Florida’s coastal reef systems. All proposals must demonstrate the capability to deliver reliable, safe, and efficient underwater debris recovery services in sensitive marine habitats, with clear evidence of trained personnel, validated dive protocols, and experience in similar deep-water operations. The solicitation is accessible through the vendor marketplace portal for registered contractors.

Florida Fish and Wildlife Conservation Commission

POSTED

DEADLINE

Environmental Review and Compliance ConsultingFulton County Purchasing Department is seeking a subcontractor to provide environmental review and compliance consulting services related to federal and state environmental regulations, with a focus on conducting environmental assessments and ensuring adherence to the National Environmental Policy Act and Georgia’s environmental statutes. The scope includes regulatory compliance analysis, permitting coordination, and documentation required to support project approvals under these frameworks. The contract opportunity was posted on July 28, 2026, with a response deadline of September 2, 2026, at 4:00 p.m. The work falls under NAICS code 541620, which classifies it as environmental consulting services. The place of performance and specific location details are not specified, but the services are intended to support Georgia-based projects under the jurisdiction of Fulton County. Submission is required through the state procurement system, with the official link provided for access to the full solicitation.

Fulton County Purchasing Department

POSTED

DEADLINE

in about 1 month

26RFP07272026K-DB Developer Services for 4330, 4334 & 4336 Fulton Industrial Circle Boulevard

Solicitation # PE-66096-NONST-2026-000000192

Fulton County, Georgia is seeking a preferred developer to advance a project at 4330, 4334, and 4336 Fulton Industrial Circle Boulevard through a competitive solicitation process. Once selected, the developer will be expected to perform critical pre-development activities prior to executing the formal Development Agreement, including conducting environmental reviews, refining the project concept and financial model, negotiating terms with the County, securing necessary entitlements, and obtaining project funding. These responsibilities are intended to ensure readiness for site control transfer and full-scale development upon agreement execution. The solicitation, numbered PE-66096-NONST-2026-000000192, was posted on July 28, 2026, with responses due by September 2, 2026, and is managed by the Fulton County Purchasing Department. Darlene Banks, CAPA, serves as the primary point of contact for inquiries regarding the opportunity.

Fulton County Purchasing Department

POSTED

DEADLINE

in about 1 month

Environmental Monitoring & Wildlife Habitat AssessmentThe contract calls for comprehensive ecological assessments across Utah’s Wildlife Management Areas to evaluate habitat quality, biodiversity levels, and the effectiveness of natural capital enhancements including carbon sequestration and wetland restoration efforts. The work requires systematic field data collection, analysis of ecological indicators, and reporting on measurable improvements in ecosystem health and function, with an emphasis on science-based outcomes that support conservation goals. All tasks must be executed in alignment with state and federal ecological standards and are expected to inform long-term land management decisions by state agencies. The opportunity is posted as a subcontract under NAICS code 541620 for environmental consulting services and is open for response until August 11, 2026. The project is managed by the state of Utah with all performance activities to occur within designated Wildlife Management Areas across the state. While location details and point of contact information are not specified in the data, proposers must be prepared to conduct fieldwork across diverse terrestrial and aquatic ecosystems throughout Utah. Subcontractors must demonstrate technical expertise in ecological monitoring, data interpretation, and the valuation of ecosystem services to meet the objectives of this effort.

POSTED

DEADLINE

AS27-5 Natural Capital Management

Solicitation # AS27-5

The State of Utah Division of Purchasing, in coordination with the Division of Wildlife Resources, is seeking a contractor to deliver professional services aimed at assessing, quantifying, enhancing, and monitoring wildlife habitats across state Wildlife Management Areas, while also facilitating the verification and transaction of natural capital assets. The selected vendor will play a critical role in translating ecological improvements into financial opportunities by promoting qualified natural capital assets to generate additional revenue streams that directly support ongoing management and enhancement activities on these areas. This contract requires a comprehensive understanding of ecological valuation, market mechanisms for natural capital, and the ability to align conservation outcomes with economic incentives. The contract term is initially set for ten years, with the possibility of two additional ten-year renewal periods, creating a potential 30-year engagement. Vendors must guarantee their pricing for the entire duration of the contract, ensuring cost stability and predictability for the state. The solicitation, titled AS27-5 Natural Capital Management, was posted on July 28, 2026, with proposals due by August 11, 2026. Award will be made to the most qualified and responsive vendor based on a scoring system compliant with state procurement code, and all work will be performed within the state of Utah. Ann Schliep serves as the primary point of contact for inquiries regarding this procurement.

POSTED

DEADLINE

Environmental Compliance and Permitting SupportThe contract titled Environmental Compliance and Permitting Support seeks a subcontractor to provide expert assistance with environmental reviews, wetland delineation, and stormwater permitting under the National Pollutant Discharge Elimination System. The work will require close coordination with the Florida Department of Environmental Protection to ensure full compliance with state environmental regulations and permitting requirements. The scope of services is focused on supporting infrastructure or development projects by addressing regulatory obligations related to natural resource protection and stormwater management. The contract is posted under NAICS code 541620 for Environmental Consulting Services and is issued by the Florida Department of Agriculture and Consumer Services. Proposals must be submitted by September 15, 2026, and the work is expected to be performed within the state of Florida, though specific location details are not provided. As a subcontract, this engagement is intended to supplement existing project teams needing specialized environmental expertise to meet regulatory timelines and standards. All work must align with Florida’s environmental protections and permitting protocols, with emphasis on accuracy, timeliness, and interagency collaboration.

Department of Agriculture and Consumer Services

POSTED

DEADLINE

in about 2 months

Environmental Compliance & Permitting SupportThe contract seeks qualified subcontractors to provide environmental compliance and permitting support, focusing on the preparation of environmental documentation, Stormwater Pollution Prevention Plans, and coordination with regulatory agencies to ensure adherence to Community Development Block Grant requirements. The work will involve generating technical materials and navigating federal and state environmental regulations to maintain compliance across projects funded under the CDBG program, requiring a thorough understanding of both environmental standards and federal grant obligations. The effort is tied to the River Valley Regional Commission in Georgia and must be executed in alignment with the NAICS code 541620, which classifies environmental consulting services. Responses are due by August 31, 2026, and the opportunity is open as a subcontract with no set-aside designation. While no specific location or point of contact is provided, the scope implies that work will be performed wherever CDBG-funded activities occur under the commission’s jurisdiction. Contractors must possess the technical expertise to deliver accurate, timely documentation and facilitate communication with environmental regulators, ensuring all permitting and compliance activities are completed efficiently and without delays to project timelines. The solicitation is publicly accessible through a state procurement portal, and bidders are expected to demonstrate relevant experience in environmental documentation and regulatory coordination for publicly funded development initiatives.

River Valley Regional Commission

POSTED

DEADLINE

in about 1 month

Environmental Compliance & NPDES ServicesThe contract seeks a subcontractor to provide comprehensive environmental compliance services focused on NPDES permitting, stormwater management planning, and related environmental permitting for an infrastructure project under the River Valley Regional Commission in Georgia. The work requires expertise in regulatory frameworks governing water quality, including the development and implementation of stormwater pollution prevention plans and adherence to federal and state environmental regulations. Performance of the contract will be tied to the infrastructure project’s needs, with all deliverables expected to meet applicable environmental standards and support lawful operations throughout the project lifecycle. Responses must be submitted by August 31, 2026, and the solicitation is classified as a subcontract under NAICS code 541620, which covers environmental consulting services. The opportunity is open to qualified vendors capable of demonstrating proven experience in environmental permitting and compliance for public infrastructure initiatives. While no set-aside designation is specified, interested parties should ensure alignment with the commission’s procedural requirements and project timelines as outlined in the official solicitation linked via the provided URL.

River Valley Regional Commission

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Quality Assurance and Inspection ServicesThe contract requires comprehensive quality assurance and inspection services to ensure all products meet exacting military standards, specifically performing in-process and final inspections in strict accordance with MIL-STD-105/ASQ Z1.4 and MIL-STD-1916, with an absolute requirement of zero non-conformances. Inspection activities encompass detailed sampling procedures, thorough documentation, and formal certification at QAP levels VII, IV, and II, ensuring compliance across all stages of production and delivery. The work is tied to a high-stakes performance environment where failure to meet specifications is not permissible, and all processes must be executed with precision and accountability. The contract falls under the NAICS code 541330 and is classified as a subcontract, with performance required at the specified location in San Diego, California, ZIP 92136-3581. It is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and responses must be submitted by August 5, 2026, with the solicitation originally posted on July 28, 2026. No set aside designation is specified, and the opportunity is open to qualified entities prepared to meet the stringent quality and documentation demands of defense-grade manufacturing support.

Engineering Services

POSTED

DEADLINE

MIL-STD-129 Marking and BarcodingThe contract requires the application of permanent markings and barcodes on unit containers in full compliance with MIL-STD-129 standards, ensuring accurate identification through required data elements including NSN, part number, lot traceability, and handling codes. No special marking instructions are needed, as indicated by the code 00-00, meaning standard labeling protocols must be followed without additional customization. The work is to be performed at a location in San Diego with ZIP code 92136-3581 and is classified as a subcontract under NAICS code 811212. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with the contracting office being the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. All marking and barcoding activities must meet military specifications to ensure compatibility with defense logistics systems.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of swaging sleeves in strict accordance with MIL-STD-2073-1E, including a mandated cleaning process followed by drying using Method 10, and packaging with wrap code ZZ to ensure no direct contact between components during transit or storage. All work must adhere to DLA RP001 standards and comply with mercury-free requirements, reflecting a commitment to environmental safety and defense logistics protocols. The packaging must safeguard the integrity of the components under military-grade preservation conditions, ensuring readiness for deployment in operational environments. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with performance required in San Diego, California, at the zip code 92136-3581. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026. The NAICS code 493190 classifies this work under other warehousing and storage, indicating the focus is on specialized handling and preservation rather than manufacturing. The contract is not subject to a set-aside designation and is accessible through the DIBBS system, though no point of contact information has been provided.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Swaging Sleeve ManufacturingThe contract calls for the manufacture of 441 swaging sleeves compliant with military specification MS51844E(1), encompassing end-to-end production including material sourcing, precision machining, surface finishing, and full traceability to ensure adherence to strict dimensional and mechanical performance standards required for wire rope assemblies. All components must be fabricated to meet or exceed military-grade tolerances, with documented chain-of-custody and quality control records maintained throughout the manufacturing process to guarantee compliance and mission-critical reliability. The solicitation is categorized as a subcontract under NAICS code 332999, issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance located in San Diego, California, 92136-3581. Interested parties must submit responses by the deadline of August 5, 2026, following the procurement process outlined through the DIBBS platform. The requirement emphasizes rigorous quality assurance and compliance with federal defense manufacturing protocols, targeting suppliers capable of delivering high-integrity components under stringent military specifications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThis contract calls for the provision of quality assurance and inspection services to ensure compliance with MIL-STD-1916 or equivalent sampling plans for in-process and final inspections. Inspection verification levels are clearly defined as Level VII for critical items, Level IV for major items, and Level II for minor items, with all inspections supporting government destination inspection requirements. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and is classified as a subcontract under NAICS code 541330. The solicitation was posted on July 28, 2026, with a response deadline of August 5, 2026, indicating a short window for proposal submission. The contracting office is part of the ASC Supplier Operations OEM Division under the Department of Defense, and all activities are tied directly to defense supply chain integrity and product conformity standards.

Engineering Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract mandates strict compliance with OSHA HazCom and DFARS requirements for the proper classification, hazard labeling, and submission of Safety Data Sheets for all hazardous substances linked to the item or its packaging. This includes ensuring that all chemical hazards are accurately identified, labeled in accordance with global harmonization standards, and that complete, up-to-date SDS documents are provided to support safe handling, storage, and transportation. Noncompliance with these regulations may result in rejected deliveries or contractual penalties, making adherence a critical requirement for successful performance. The requirement applies to a subcontract under the NAICS code 541620, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, with performance tied to the location at New Cumberland, Pennsylvania, 17070-5002. Responses must be submitted by August 5, 2026, and the solicitation is open for participation without a specific set-aside classification. All vendors must demonstrate documented processes for managing hazardous materials compliance, including internal verification of SDS accuracy and labeling alignment with federal regulations to ensure full regulatory alignment across the supply chain.

Environmental Consulting Services

POSTED

DEADLINE

Military-Grade Packaging and PalletizationThe contract requires the packaging, labeling, and palletization of defense-related items to meet strict Department of Defense standards, specifically MIL-STD-129 and RP001, ensuring all items are properly identified, handled, and prepared for shipment. Compliance with these military-grade specifications is mandatory to guarantee uniformity, traceability, and logistical efficiency across the supply chain. Work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and adheres to the NAICS code 493190 which corresponds to other transportation support activities. This is a subcontract opportunity under the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense, with proposals due by August 5, 2026, and the solicitation posted on July 28, 2026. All activities must align with DLA requirements to facilitate seamless integration into military logistics networks.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Machining and Metal FabricationThe contract requires the manufacture of the 'INSERTER AND REMOVE' component, part number A10002-7, to exact military specifications involving precision machining, metal forming, and assembly processes. All work must comply with defense-grade quality standards, ensuring the component’s structural integrity and performance under demanding operational conditions. The production involves the handling and fabrication of metal parts with tight tolerances, and the finished product must meet stringent military requirements for reliability and longevity. This is a subcontract opportunity under the NAICS code 332613, posted by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation is open with a response deadline of August 5, 2026, and the work is to be performed at a designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002. The contract is part of a broader defense supply chain effort, and interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered for award.

Spring Manufacturing

POSTED

DEADLINE

Logistics and Electronic Submission via DIBBS/WAWFThe contract centers on managing electronic logistics submissions through the Defense Information Business Base System and the Wide Area Workflow platform, requiring full compliance with Department of Defense procurement protocols. Key responsibilities include handling invoicing processes, ensuring accurate DoDAAC, UEI, and CAGE code application, and verifying FOB origin adherence for all transactions. This subcontract is aligned with NAICS code 488510, indicating a focus on freight transportation arrangement services critical to military supply chain operations. All work must be conducted in strict accordance with DOD standards, with electronic documentation submitted through designated government systems to ensure traceability and regulatory compliance. The solicitation was posted on July 28, 2026, with a firm response deadline of August 5, 2026, leaving a narrow one-week window for interested parties to submit proposals. The contracting activity is under the ASC SUPPLIER OPER OEM DIVISION, part of the Department of Defense, though specific performance location and point of contact details are not provided. Interested subcontractors must be prepared to demonstrate proven experience with DIBBS and WAWF systems, as well as familiarity with federal acquisition rules governing electronic invoicing and transportation documentation. Failure to comply with coding or FOB requirements may result in rejection of submissions or payment delays.

Freight Transportation Arrangement

POSTED

DEADLINE

Cybersecurity and CMMC Compliance SupportThis contract seeks support for the implementation of cybersecurity standards required to protect controlled unclassified information, specifically focusing on alignment with NIST SP 800-171, CMMC Level 2, and DFARS 252.204-7012. The work involves assessing current systems, identifying gaps in compliance, and deploying controls to meet federal requirements for securing sensitive data within defense supply chain environments. The subcontractor will be expected to provide technical expertise in security framework integration, documentation, policy development, and readiness assessments to ensure full adherence to these standards. The opportunity is classified as a subcontract under NAICS code 541612, indicating it relates to management consulting services within the defense sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Responses are due by August 5, 2026, with the solicitation posted on July 28, 2026. There is no set-aside designation, and performance location details are not specified. Interested parties must engage through the DIBBS portal using the provided reference number to submit proposals and access additional solicitation materials.

Human Resources Consulting Services

POSTED

DEADLINE

Packaging, Marking, and Hazardous Materials ComplianceThis contract requires strict adherence to military standards for packaging, labeling, and hazardous materials documentation, specifically mandating compliance with MIL-STD-2073-1E for defense packaging, MIL-STD-129 for uniform marking of military shipments, and OSHA HAZCOM for hazard communication. All materials must be prepared and documented to meet these exacting specifications to ensure safe handling, identification, and transportation within defense supply chains. The contract is classified as a subcontract under NAICS code 561910, indicating it pertains to support activities for transportation and logistics, and is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The response deadline is August 5, 2026, with the solicitation posted on July 28, 2026, providing potential offerors approximately one week to submit proposals. The place of performance and specific location details are not provided, but performance is expected to align with DoD logistical requirements across unspecified operational areas.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Other Instrumentation (CLINs 0F1X1 and 0RMF7)The contract calls for the supply of three units under each of two contract line item numbers, 0F1X1 and 0RMF7, pertaining to specialized instrumentation likely intended for defense applications. These items must comply with National Stock Number standards and are subject to strict export control regulations due to their sensitive nature and potential military use. The solicitation is classified as a subcontract under the NAICS code 334510, which corresponds to the manufacture of navigational, measuring, electromedical, and control instruments. The posting date is July 28, 2026, with responses required by August 5, 2026, indicating a tight turnaround for qualification and proposal submission. The contracting activity originates from the ASC Supplier Operations OEM Division within the Department of Defense, though specific performance locations and points of contact are not provided. All activity is administered through the DIBBS platform, underscoring the federal procurement framework guiding this procurement.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE