Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Hazardous-Use Electrical Systems Installation

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the installation of explosion-proof electrical fixtures, NEMA 3R enclosures, and associated wiring in areas designated for flammable storage, with strict adherence to NFPA 70 and NFPA 30 standards to ensure safety and regulatory compliance. All work must be performed in locations where the presence of flammable vapors or liquids necessitates specialized electrical systems designed to prevent ignition sources. The project requires the use of certified materials and qualified personnel to meet the stringent requirements for hazardous locations, emphasizing proper grounding, sealing, and installation techniques to mitigate explosion risks. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 238210 for electrical contracting, and is managed by the Department of the Interior through Construction A/e Team 3 Fws. The solicitation was posted on July 27, 2026, with a response deadline of August 31, 2026, allowing only small business concerns to compete. The place of performance and specific site details are not provided, suggesting the contractor will receive further location-specific information upon award. Compliance with all federal safety codes and the obligation to deliver a fully functional, code-compliant electrical system in a high-risk environment are paramount to contract success.

General Info

Install explosion-proof electrical systems in flammable storage areas per NFPA 70 and 30, only for small businesses.

Agency

Department Of The Interior → Construction A/e Team 3 FwsView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

VA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Construction A/e Team 3 Fws
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of The Interior → Construction A/e Team 3 Fws
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of explosion-proof electrical fixtures, NEMA 3R enclosures, and wiring in flammable storage areas per NFPA 70 and NFPA 30.

Similar Contracts

Same NAICS industry code

NAICS: 238210
New
SLED
Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.
Aviation Facilities & Infrastructure

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 238210
New
SLED
Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.
Aviation Project Management Group

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 238210
New
SLED
Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.
Port Construction Services

POSTED

about 2 hours ago

DEADLINE

N/A
View Details
NAICS: 238210
New
SLED
Holiday Lighting Installation, Maintenance & Strike Services Longhorn Lights
Solicitation # 721-26004
The University of Texas at Austin is seeking qualified vendors to provide comprehensive holiday lighting services for the Longhorn Lights program, encompassing annual installation, maintenance, and complete strike of the university-owned lighting inventory. Work must be executed in accordance with detailed design drawings, renderings, and schematics developed by the UEE production team, ensuring alignment with the university’s aesthetic and operational standards. The vendor is responsible for all consultation, on-site adjustments, and full removal of equipment after the event period, with services rendered on an as-needed basis throughout the year as required by the university’s scheduling and programming needs. All proposals must be submitted by the deadline of August 17, 2026, in response to solicitation number 721-26004, which was posted on July 30, 2026. The procurement is managed by the University of Texas at Austin under the State and Local Government (SLED) category, with performance required in Texas. Primary point of contact for inquiries is Lina-Courtney Trejo, reachable via email at lina.trejo@austin.utexas.edu or by phone at 210-784-7316. Vendors are expected to demonstrate proven experience in large-scale lighting installations and the ability to work within strict design parameters while adhering to safety and logistical requirements on campus.
University of Texas at Austin

POSTED

about 11 hours ago

DEADLINE

in 18 days
View Details
NAICS: 238210
New
International
Kindersley Early Years Family Resource Centre Life Safety Upgrades
Solicitation # SWSD-2026015
The Sun West School Division No. 207 is seeking qualified contractors to bid on the Kindersley Early Years Family Resource Centre Life Safety Upgrades project, solicited under SWSD-2026015, with a response deadline of August 27, 2026. The scope includes the full installation of a new fire alarm system and the replacement or installation of exit and emergency lighting throughout the facility, as specified in the technical documents prepared by Alfa Engineering Ltd. All work must comply with applicable codes and standards for life safety systems in public buildings, and bidders are expected to review all project documentation thoroughly before submitting proposals. The project is located in Kindersley, Saskatchewan, and is intended to enhance the safety and regulatory compliance of the early years center. Interested parties must direct all inquiries to Alfa Engineering Ltd., the designated point of contact, via phone at 306-352-7989 or email at alfa@alfaengltd.com. Tenders must be submitted through the SaskTenders portal by the stated deadline, and no late submissions will be accepted. The division has not designated any specific set-aside programs, making this an open opportunity for eligible contractors. Bidders are advised to verify site conditions, understand system integration requirements, and ensure all proposed equipment and installations meet current provincial fire and building safety regulations. The contract award will be based on technical competence, compliance, and competitive pricing.
Sun West School Division No. 207

POSTED

about 11 hours ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of The Interior → Construction A/e Team 3 Fws

Same awarding agency

NAICS: 236220
New
Federal
Fire-Rated Building ConstructionThe contract involves the installation of fire-rated walls, doors, and structural components designed to achieve a 4-hour fire resistance rating in accordance with ASTM E119 and UL 263 standards, utilizing materials certified under FM Class 6049. This work is part of a broader construction effort focused on enhancing building safety through fire-resistant construction methods, ensuring compliance with stringent fire safety regulations. The materials and methods specified are critical to meeting performance requirements under high-heat exposure scenarios, and all installations must be carried out with precision to maintain the integrity of the rated assemblies. This is a subcontract classified as a Total Small Business Set-Aside under the SBA program, meaning only small businesses are eligible to bid, as defined by FAR 19.5. The North American Industry Classification System code is 236220, indicating the project falls under commercial and institutional building construction. The contract is issued by the Department of the Interior through Construction A/e Team 3 Fws, with a deadline for responses set for August 31, 2026. While no specific location or point of contact is provided, the nature of the work suggests performance will occur at a federally managed facility requiring strict adherence to fire safety codes and procurement regulations for federal construction projects.
Commercial and Institutional Building Construction

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 236220
New
Federal
Z--WA-LITTLE WHITE SALMON -CHEMICAL STORAGE
Solicitation # 140FC326Q0044
The contract is for the construction of a chemical storage building at the Little White Salmon National Fish Hatchery in Cook, Washington, under a Total Small Business Set-Aside as defined by FAR 19.5, and is solicited under NAICS code 236220 for construction of other commercial buildings. It is a Firm-Fixed-Price procurement issued by the U.S. Fish and Wildlife Service’s Construction A/E Team 3, part of the Department of the Interior, with the solicitation number 140FC326Q0044 and a response deadline of August 31, 2026, at 4:00 PM Mountain Time. The award will be made on a Lowest Price Technically Acceptable basis without discussions, meaning proposals must meet a minimum threshold of technical acceptability and the lowest-priced compliant offer will be selected. Performance is required to begin within one calendar day after receipt of the notice to proceed and must be completed within 300 calendar days. The contractor is responsible for furnishing labor, materials, equipment, and oversight, ensuring compliance with federal, state, and local codes including OSHA 29 CFR 1910 and 1926, USACE EM 385-1-1, NFPA 30 and 70, IBC, and EPA regulations, along with specific requirements for hazardous material labeling under Federal Standard No. 313, ozone-depleting substance restrictions, and fire safety controls including 4-hour fire-rated construction verified by ASTM E119 or UL 263. All submissions must be made electronically to Shannon Barnhill at shannon_barnhill@fws.gov and must include a fully completed SF-1442, accurate UEI and CAGE codes, proper size status representation in SAM.gov, and compliance with all representations and certifications outlined in Section K, including those related to delinquent taxes, felony convictions, and prohibited telecommunications equipment. The contract incorporates mandatory clauses for security prohibitions, safeguarding of contractor information systems, hazardous materials handling, and inspection and acceptance at the performance site under FAR 52.246-12. Special requirements include immediate reporting and possible work stoppage if endangered species are encountered, adherence to historical preservation laws upon discovery of archaeological materials, flow-down obligations for subcontractors, and Davis-Bacon wage requirements for truck drivers working directly at the site. Invoicing must be submitted exclusively through
Commercial and Institutional Building Construction

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238290
Federal
Z--WA-QUILCENE NFH-INTAKE GENERATOR
Solicitation # 140FC326Q0039
The contract solicitation for the WA-QUILCENE NFH-INTAKE GENERATOR, issued under solicitation number 140FC326Q0039 by the Department of the Interior’s Construction A/E Team 3, Fish and Wildlife Service, is a sealed bid solicitation with a total small business set-aside under FAR 19.5. It is limited to small business concerns and seeks a fixed-price contract for the installation of a generator at the Big Quilcene River Intake Structure in Quilcene, Washington, with performance required to be completed within 30 days after receipt of approval or permits, and no later than October 1, 2026. The place of performance is the hatchery site, and all work must comply with federal regulations including FAR clauses related to material and workmanship, superintendence, permits, and inspection of construction. Technical capability and relevant experience are evaluated on a binary pass/fail basis, with award going to the lowest-priced technically acceptable offeror under the LPTA methodology; discussions are not permitted, and evaluation stops once the first qualifying bid is identified. The contractor must provide all labor, materials, equipment, and coordination necessary for the installation, adhering to the Statement of Work and wage determinations outlined in the attachments. All submissions must include completed SF-1442 forms, accurate representations and certifications via SAM.gov, a valid UEI and CAGE code, and compliance with clauses addressing personal identity verification, convicts labor, payroll records, the Copeland Act, and hazard communication standards. Invoicing is mandatory through the Invoice Processing Platform (IPP), with no alternative systems accepted; payment is electronic and tied to Treasury processes managed by the Federal Reserve Bank of St. Louis. No pricing data is included in the solicitation, as offerors are required to submit their own quotes, and no contract value is estimated or disclosed upfront. All proposals must be submitted electronically by email to Shannon_barnhill@fws.gov no later than 4:00 p.m. Mountain Time on August 17, 2026, with physical delivery as a secondary option. Inspection and acceptance occur at the worksite in Quilcene, WA, under the authority of the Contracting Officer, with final acceptance contingent on conformity to specifications, approved materials, and performance standards.
Other Building Equipment Contractors

POSTED

8 days ago

DEADLINE

in 18 days
View Details