Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

HOSE ASSEMBLY, NONME

Active
SPE7M4-26-T-292GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a nonmetallic hose assembly measuring 0.375 inches in diameter and 240 inches in length, equipped with flared fittings on both ends and designed without a sleeve, in full compliance with the technical specification titled “HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO STRAIGHT, FLARED, LIGHTWEIGHT.” The assembly is manufactured to meet the SAE AS153 Revision K standard dated November 1, 2021, and is identified by the NSN 4720-01-395-8782 and part number AS153-06-2400. The item is subject to strict qualification requirements, mandating that it be produced or assembled solely by manufacturers or distributors listed on the Performance Review Institute’s Qualified Manufacturer List (QML) or Qualified Products List (QPL), accessible via eAuditNet.com. The use of ozone-depleting chemicals is explicitly prohibited, and any substitute materials must be pre-approved unless already authorized by the specification. The contract requires delivery of one unit within 20 days from the award date, with shipment FOB origin and inspection and acceptance occurring at the point of manufacture. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA packaging directives, and the unit of issue is one each (EA). The delivery address is Luke Air Force Base in Arizona, and the item must be shipped by the fastest traceable means—parcel post is strictly prohibited. All technical and quality requirements referenced in the DLA Master List supersede any other standards, and no deviations or waivers are permitted unless formally submitted and approved under configuration change management protocols. The solicitation, issued under contract SPE7M4-26-T-292G, has a response deadline of August 10, 2026, and the original required delivery date is July 28, 2026.

General Info

One PTFE hose assembly, 0.375x240 in, flared ends, 3000 PSI, 400°F, NSN 4720-01-395-8782, QML-only, FOB origin, deliver to Luke AFB in 20 days.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

14171 W STARFIGHTER ST BLDG 945, LUKE AFB, AZ, 85309-1869, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS

Full Description

Show more
HOSE ASSEMBLY,NONME
HOSE ASSEMBLY,NONMETALLIC
0.375 IN SIZE, 240 IN. LG., WITH FLARED FITTINGS, ST TO ST, WITHOUT
SLEEVE IAW SPEC TITLED:"HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI,
400 °F, STRAIGHT TO STRAIGHT, FLARED, LIGHTWEIGHT".
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT
SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED
MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED
MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS
LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS
LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT
WWW.EAUDITNET.COM.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML
REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE
QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE
QPL(S)/QML(S).
SPE7M4-26-T-292G
SECTION B
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS153 REVISION NR K DTD 11/01/2021 PART PIECE NUMBER: AS153-06-2400
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017673376 0001 EA 1.000
NSN/MATERIAL:4720013958782
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4887
FB4887 56 LRS LGRDDC
CP 623-856-6595
14171 W STARFIGHTER ST BLDG 945
LUKE AFB AZ 85309-1869
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4887
SPE7M4-26-T-292G
SECTION B
PR: 7017673376 PRLI: 0001 CONT’D
FB4887 56 LRS LGRDDC
CP 623-856-6595
14171 W STARFIGHTER ST BLDG 945
LUKE AFB AZ 85309-1869
US
M/F: (TCN) FB488762040020
RDD: 777
PROJ: TP 2
SUPP ADD: YBZ126 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/28/2026
SPE7M4-26-T-292G NSN/Part Number: 4720-01-395-8782 Quantity: 1 EA Purchase Request: 7017673376QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
ADAPTER, STRAIGHT, TU
Solicitation # SPE7M3-26-T-7550
The contract is for a straight tube-to-boss adapter conforming to SAE Aerospace Standard AS1986 Revision N and referenced standard AS85720 Revision C, classified as a high-pressure dynamic beam seal fitting. The product is a critical application item requiring compliance with Performance Review Institute Qualified Manufacturer List (QML) or Qualified Products List (QPL) specifications, meaning manufacturing or assembly must be performed only by accredited entities listed on the PRI QML/QPL database. Use of ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The item must be packaged per ASTM D3951, with DLA Master List of Technical and Quality Requirements superseding all other standards, and all packaging labeled per MIL-STD-129. Palletization must follow RP001: DLA Packaging Requirements for Procurement. The NSN 4730-01-354-3250 is procured in three separate line items totaling 66 units, with unit prices of $19.00, $21.00, and $26.00 respectively, each requiring delivery within 87 days under FOB Origin terms with zero quantity variance allowed. Inspection and acceptance occur at the destination. Shipments are directed to three DLA distribution facilities in Cherry Point NC, Hill AFB UT, and San Diego CA, with specific parcel and freight addresses provided. The original required delivery date is February 12, 2027, with ship dates scheduled between October 2026 and April 2027. The solicitation number is SPE7M3-26-T-7550, issued by the Department of Defense’s Fluid Handling Division, with William Cain as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332996
New
DIBBS
SLEEVE, COMPRESSION,
Solicitation # SPE7M3-26-T-7551
This contract specifies the procurement of compression sleeves under NSN 4730-00-443-2830 and part number ST2284-10, with a total quantity of 2,628 units to be delivered FOB origin within 145 days, with a required ship date of December 23, 2026. The item is designated as a critical application item, and only approved suppliers—RTX Corporation, SPS Technologies LLC DBA Airdrome, and SECO SEALS, INC—are authorized to provide the specified part. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must be adhered to as of the solicitation or award date depending on acquisition size. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific codes for pressure, drying, wrapping, and intermediate containment, with marking following MIL-STD-129 and no special marking required. Inspection and acceptance occur at destination, and sampling must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Class I ozone-depleting chemicals are strictly prohibited unless exempted by SPE7M3-26-T-7551 Section B, and all substitutes require prior approval. The Certificate of Conformance procedure is authorized unless overridden by a quality assurance letter. The delivery address is Robins Air Force Base, Georgia, and transportation logistics are governed by DLAD procedural notes C19 and C20.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details