Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Main Drainage Valve Overhaul and Grey Water Pump Repair

Active

Federal

Response Deadline08/24/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the overhaul of main drainage valves and the repair of the forward grey water pump discharge check valve, involving full disassembly, detailed inspection, and proper reassembly to restore operational integrity. All work must comply with technical specifications to ensure long-term reliability and safety standards, with emphasis on precision and adherence to industry best practices during each phase of the service. The effort is limited to small business entities as it is designated a Small Business Set Aside under the SBA program, and the work is classified under NAICS code 811411 for repair and maintenance services. The solicitation was posted on July 30, 2026, with a response deadline of August 24, 2026, at 4:00 PM, and the contract is structured as a subcontract under the Department of Homeland Security through its SFLC Procurement Branch 2. Performance must occur in Alameda, though no specific street address is provided. The procurement is managed under the agency’s internal procurement protocols, and interested parties must respond through the official SAM.gov portal before the deadline to be considered.

General Info

Overhaul drainage valves and repair pump valve; small business set aside, Alameda performance, SAM.gov submission by August 24, 2026

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)View Agency

NAICS

811411 - Home and Garden Equipment Repair and MaintenanceView NAICS

Place of Performance

Alameda, CA, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 04:00:00 PM UTCin 24 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Overhaul of main drainage valves and repair of the forward grey water pump discharge check valve, including disassembly, inspection, and reassembly.

Similar Contracts

Same NAICS industry code

ADA-Compliant Signage InstallationThe City of Oxnard is seeking a subcontractor to supply and install ADA-compliant restroom and directional signage that meets all federal accessibility standards, including braille and tactile characters with properly mandated mounting heights. The work requires precise adherence to Americans with Disabilities Act guidelines to ensure full accessibility for individuals with visual and mobility impairments, covering both the fabrication and professional installation of signage throughout designated facilities. All materials and installations must be durable, legible, and compliant with current ADA regulations to guarantee long-term usability and legal compliance. The contract is open for bid with a response deadline of August 25, 2026, and is classified under NAICS code 811411, which pertains to other personal and household goods repair and maintenance. This solicitation is structured as a subcontract and does not specify any set-aside provisions for small, minority-owned, or other disadvantaged businesses. Bidders should review the official posting at the provided URL for detailed technical specifications, expected timelines, and any additional performance requirements not outlined in the public notice. The project is located in Oxnard, California, and all work must be completed in accordance with local and federal accessibility mandates.

POSTED

DEADLINE

Defense Logistics Marking and LabelingThe contract requires precise application of MIL-STD-129 compliant markings and hazardous material labels on unit containers and shipments destined for DLA supply deliveries, ensuring full adherence to military packaging and labeling standards. All work must meet strict regulatory requirements to guarantee proper identification, handling, and traceability of defense materials throughout the logistics chain, with particular emphasis on safety and compliance for hazardous substances. The task is critical to maintaining operational readiness and supply chain integrity for the Department of Defense. This is a subcontract with a solicitation closing on August 6, 2026, and was posted on July 29, 2026 under the NAICS code 811411, indicating it falls within the support activities for transportation sector. The contract is managed by the Aviation Supply Chain ESOC Buys office within the Department of Defense, and performance is expected to support DLA logistics operations without specification of a physical location. The work demands technical expertise in military labeling standards and hazardous material compliance, and bidders must demonstrate capability to execute precisely and on schedule to support mission-critical supply functions.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Origin Inspection Coordination and Quality ComplianceThe contract requires coordination and execution of government inspections at the origin to ensure full compliance with key federal and military standards including FAR 52.246-2, MIL-STD-129, MIL-STD-2073-1E, and DLA RA001. This involves meticulous documentation, proper staging of items, and adherence to quality control protocols to meet Department of Defense requirements prior to shipment. The work must be performed in alignment with the specified regulations to guarantee that all materials meet inspection and packaging criteria accepted by federal authorities. This is a subcontract under the NAICS code 811411, issued by the LAND SUPPLY CHAIN organization within the Department of Defense, with a response deadline of August 10, 2026. While details such as the point of contact and specific place of performance are not provided, the solicitation is accessible through the DIBBS system under reference number SPE7L126T889G. The nature of the requirement indicates a focus on logistics readiness, supply chain integrity, and quality assurance processes critical to military materiel readiness and traceability.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Marking, Labeling, and Bar-CodingThis contract requires the application of MIL-STD-129 compliant markings and 2D Data Matrix barcodes to containers and units destined for Department of Defense shipments, ensuring full adherence to military labeling standards for traceability and logistics efficiency. The work includes the creation and affixing of standard storage and shipment labels to meet exacting DoD requirements for inventory management, handling, and delivery across the supply chain. The solicitation is classified as a subcontract under NAICS code 811411, with a response deadline of August 10, 2026, and was posted on July 29, 2026, under the Land Supply Chain division of the Department of Defense. The place of performance and specific office details are not specified, but performance must support the broader DoD logistics infrastructure without geographic limitation implied by the contract language.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Permanent Item Marking (Bare Item Identification)The contract requires the application of permanent physical markings to a linear actuator for traceability purposes in accordance with requirement RQ017, even though an IUID waiver is in place. This work involves directly marking the bare item to ensure unique identification and long-term accessibility of traceability data, which is critical for supply chain integrity and maintenance records. The task is to be performed under a subcontract and must adhere to the specified marking standards regardless of the waived IUID compliance. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026, and falls under NAICS code 811411 for industrial machinery repair and maintenance. The work is to be performed at a location in Tracy, California, with a zip code of 95304-5000. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, indicating this is a defense-related procurement requiring strict adherence to technical and compliance standards for item identification.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-STD-129 Marking & Labeling ServicesThe contract involves the application of durable, compliant labels in accordance with MIL-STD-129 standards, ensuring accurate and standardized identification for military shipments. Required label information includes the National Stock Number, CAGE code, the special code ZZ-ZZ, and specific shipment identifiers to support logistics tracking and inventory management across Department of Defense operations. Work must be performed to exact specifications to ensure full compliance with federal marking requirements, with all labels designed to withstand harsh environmental conditions and maintain legibility throughout the supply chain. The opportunity is classified as a subcontract under NAICS code 811411 and is issued by the LSO Combat Vehicles and Armament office within the Department of Defense. The place of performance is designated as Virginia Beach, Virginia, with a response deadline of August 10, 2026. The solicitation is accessible via the DIBBS platform, and while no set-aside type is specified, contractors must be prepared to meet rigorous military labeling protocols and deliver services that align with operational readiness and supply chain integrity standards.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

MIL-STD-129 Marking, Labeling, and BarcodingThe contract requires compliance with MIL-STD-129 for the application of standardized markings, labels, and 2D Data Matrix barcodes on military components, ensuring uniform identification and traceability across the supply chain. This includes precise placement and durability of labels, with special attention to hazard labeling for any components containing mercury, in accordance with federal and defense safety regulations. All labeling must meet exacting military standards for readibility, material resilience, and environmental resistance to ensure operational integrity under field conditions. The work is designated as a subcontract under the NAICS code 811411, with performance required at New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 29, 2026, with a response deadline of August 10, 2026, and is administered by the Department of Defense’s Nuclear Reactor Program. While no set-aside provisions or point of contact details are specified, contractors must be prepared to demonstrate full adherence to MIL-STD-129 requirements and proper handling of hazardous materials to qualify for award.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

MIL-STD-129 Marking, Labeling, and BarcodingThis contract requires the application of military-standard markings, labels, and barcodes to shipping containers in full compliance with MIL-STD-129, ensuring that all identifiers are durable, legible, and scannable under operational conditions without the use of special marking codes. The work must be executed to meet strict Department of Defense specifications for uniformity and reliability in logistics tracking, with an emphasis on long-term resilience in varied environmental conditions. All labeling solutions must be compatible with standard military scanning systems and must maintain integrity through handling, storage, and transit. The opportunity is a total small business set-aside under the SBA program, designated for companies certified as small businesses under NAICS code 811411, and is issued by the Land Supply Chain office within the Department of Defense. The place of performance is specified as Texarkana, Texas, with a ZIP code of 75507-5000. Responses are due by August 10, 2026, and the opportunity was posted on July 29, 2026. The contract is structured as a subcontract and is accessible through the DIBBS platform for interested parties to review additional details and submit proposals.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Shipment Marking and LabelingThe contract requires adherence to MIL-STD-129 standards for all military shipment markings, encompassing barcoding, labeling, and the precise placement of these markings adjacent to existing standard military identifiers. This subcontract is issued under the NAICS code 811411 by the ACTIVE DEVICES DIVISION of the Department of Defense, with performance expected at the designated location in Bethesda, Maryland, ZIP code 20817-5700. All work must ensure full compliance with federal military packaging and labeling regulations to support logistics and tracking across the defense supply chain. Responses to this solicitation are due by August 6, 2026, and the opportunity is posted on the DIBBS platform under the reference number SPE7M526Q0785. While no set-aside preferences or point of contact details are provided, the requirement underscores strict technical precision in marking execution, making experience with military logistics standards a critical qualification for any prospective subcontractor.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Corrective Repair and Emergency Response ServicesThis contract covers on-demand troubleshooting and emergency repair services for critical laboratory equipment failures, including malfunctions in pumps, sensors, and membrane systems, with the primary goal of minimizing operational downtime in sensitive lab environments. The services are intended to respond swiftly to突发 system issues that could disrupt research, testing, or patient-related activities, ensuring continuous functionality of essential infrastructure. The contract is classified as a subcontract under NAICS code 811411, issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6, and was posted for competition on July 29, 2026, with responses due by August 3, 2026. Although no specific location or point of contact is provided, the services are expected to be performed wherever the VA’s laboratory systems require immediate attention. The focus is on rapid response and technical expertise to restore equipment reliability without delay.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Preventive Maintenance Services for Laboratory Water Purification SystemsThe contract outlines preventive maintenance services for proprietary laboratory water purification systems, encompassing routine tasks such as filter replacements, system diagnostics, tubing inspection, and performance optimization to ensure continuous and reliable operation. These services are critical for maintaining the integrity and efficiency of water purification equipment used in sensitive laboratory environments, where consistent water quality is essential for research and testing accuracy. The work is governed under a subcontract arrangement with a NAICS code of 811411, indicating it falls under commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on July 29, 2026, with a response deadline of August 3, 2026, and is managed by the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs. Although specific geographic performance location and point of contact details are not provided, the contract is accessible via the SAM.gov platform, and all work is expected to align with the operational standards required for federal laboratory infrastructure. Subcontractors must be prepared to deliver timely, qualified maintenance services without disruption to ongoing laboratory activities.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Fuel Polishing and Filtration ServicesThe City of Charlotte is seeking subcontractor services for annual fuel polishing to maintain the integrity of stored diesel fuel by removing water, particulates, and microbial contaminants through advanced filtration processes. The work includes comprehensive quality verification to ensure fuel meets operational standards, with all tasks to be performed on an annual basis. This contract is classified under NAICS code 811411 and is open for responses until August 24, 2026, with the solicitation posted on July 29, 2026. The service will be performed at locations within North Carolina, though specific site details are not provided, and interested parties must submit proposals through the official portal linked in the solicitation. The contract type is subcontract, indicating it is part of a broader procurement initiative, and no set-aside provisions are specified.

City of Charlotte

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

Stern Deck Tenting ServicesThe contract titled Stern Deck Tenting Services is a subcontract issued under a Small Business Set Aside classification, specifically designated for total small business participation, with a NAICS code of 238990 for other specialized trade contractors. It involves the provision of temporary weather protection through the installation and management of tenting systems on the stern deck of vessels during ongoing repair operations. The work is intended to shield personnel and equipment from environmental elements, ensuring continuous and safe repair activities regardless of inclement weather conditions. The performance location is specified as Alameda, with the contracting office operating under the Department of Homeland Security through its Sflc Procurement Branch 2. The solicitation was posted on July 30, 2026, and responses are due by August 24, 2026, at 4:00 PM. This procurement does not include a solicitation number and lacks specific point of contact details or office address information beyond the place of performance. Interested small business contractors must be prepared to deliver timely, secure, and effective tenting solutions aligned with operational requirements on the stern deck, including logistics, materials, and personnel deployment to support ongoing repair missions. The opportunity is accessible via a public SAM.gov link for further submission and compliance details.

All Other Specialty Trade Contractors

POSTED

DEADLINE

MP Fuel Storage and Overflow Tank Cleaning and InspectionThe contract involves the cleaning and inspection of main propulsion fuel storage and overflow tanks to assess contamination, corrosion, and structural integrity, ensuring operational safety and compliance with maritime standards. This work is critical for maintaining the readiness and longevity of propulsion systems and requires specialized expertise in tank remediation and non-destructive evaluation methods. The effort must be performed in Alameda, with all activities adhering to strict environmental and safety protocols. This is a Small Business Set Aside contract under NAICS code 562910, reserved exclusively for small businesses, and is issued by the Department of Homeland Security’s Sflc Procurement Branch 2. The opportunity was posted on July 30, 2026, with a firm response deadline of August 24, 2026, at 4:00 PM. Subcontractors must be prepared to meet rigorous technical and regulatory requirements, and all work must be executed in accordance with federal guidelines governing hazardous material handling and vessel maintenance.

Remediation Services

POSTED

DEADLINE

Talon Grid and Incinerator Inspection and TestingThe contract pertains to the inspection, testing, and certification of the Talon Grid and shipboard incinerator systems to ensure they meet operational readiness standards. This effort is critical for verifying the functionality, safety, and compliance of both systems prior to deployment, with particular emphasis on performance under real-world maritime conditions. The work will involve comprehensive evaluations by qualified personnel to confirm alignment with technical specifications and operational requirements, addressing both mechanical integrity and regulatory compliance. This is a small business set-aside subcontract under NAICS code 541330, designated for SBA-certified small businesses, and is managed by the SFLC Procurement Branch 2 under the Department of Homeland Security. The place of performance is centered in Alameda, indicating the work will be conducted onsite at a maritime or naval facility. Bidders must submit their proposals by August 24, 2026, with the opportunity posted on July 30, 2026, providing a four-week window for preparation and response. The nature of the contract requires technical expertise in marine systems, rigorous documentation, and adherence to federal testing protocols to guarantee mission-critical readiness.

Engineering Services

POSTED

DEADLINE

Slip-Resistant Deck Covering and General Deck PreservationThe contract pertains to the repair and preservation of non-skid deck coatings and general deck surfaces to prevent corrosion and ensure operational safety, targeting maritime environments where slip resistance and structural integrity are critical. The work involves maintaining deck surfaces in compliance with safety and durability standards to mitigate risks associated with wear, weather exposure, and chemical degradation. The scope centers on specialized coating applications and maintenance techniques tailored to naval or coast guard vessels, ensuring long-term performance under harsh marine conditions. This is a Small Business Set Aside contract under NAICS code 238290, reserved exclusively for small businesses, and is issued by the Department of Homeland Security through its SFLC Procurement Branch 2. The opportunity was posted on July 30, 2026, with proposals due by August 24, 2026. Performance is expected to occur in Alameda, with no specified point of contact or detailed address provided. The contract is classified as a subcontract, indicating it may be awarded to a prime contractor who will oversee or integrate the work into a larger project. Participation is restricted to eligible small business entities responding to the solicitation through the SAM.gov portal.

Other Building Equipment Contractors

POSTED

DEADLINE

Elex Dry Air Compressor InstallationThe contract entails the installation of a new electrical dry air compressor system on a vessel, with full integration into existing shipboard systems including necessary electrical connections and comprehensive testing to ensure operational reliability. The work is structured as a subcontract under a Small Business Set Aside designation, reserved exclusively for small businesses, and is classified under NAICS code 237990 for other heavy and civil engineering construction. Performance of the work is required to take place in Alameda, with all deliverables subject to strict compliance with maritime and technical standards. The opportunity was posted on July 30, 2026, and responses must be submitted by August 24, 2026, with the solicitation managed by the Department of Homeland Security through its SFLC Procurement Branch 2. The project demands precision in system integration and rigorous post-installation validation to meet mission-critical shipboard performance requirements.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Side Boat Davit and Nulka Armor Pad Cover Plate RenewalThe contract pertains to the refurbishment of the side boat davit system and the replacement or repair of Nulka missile decoy armor pad cover plates, critical components for maritime defense and vessel safety. This is a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to bid, with the North American Industry Classification System code 332999 indicating it falls under other fabricated metal product manufacturing. The opportunity was posted on July 30, 2026, with a response deadline of August 24, 2026, and is managed by the SFLC Procurement Branch 2 under the Department of Homeland Security. Work is to be performed in Alameda, ensuring the maintenance and operational readiness of naval equipment used in defense and security missions. The project requires specialized technical expertise in mechanical refurbishment and armor system integrity to meet stringent military standards.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Marine Fire Prevention and Suppression System MaintenanceThe contract encompasses the inspection, testing, maintenance, and repair of onboard fire suppression systems and related safety equipment aboard USCGC BERTHOLF, ensuring all systems remain fully operational and compliant with maritime safety standards. Work is to be performed in Alameda and is designated as a Small Business Set Aside, specifically reserved for small businesses under the SBA program, with the North American Industry Classification System code 561612 indicating specialized support services for domestic commerce and public works. The solicitation was posted on July 30, 2026, and responses are due by August 24, 2026, with the contracting activity managed by the SFLC Procurement Branch 2 under the Department of Homeland Security. This subcontract focuses on sustaining mission-critical safety infrastructure aboard a national security vessel, requiring technical expertise in marine fire protection systems and strict adherence to federal maritime regulatory requirements.

Security Guards and Patrol Services

POSTED

DEADLINE

USCGC BERTHOLF FQ2 FY27 Dockside Repair Services

Solicitation # 70Z08526QLREP0023

The contract is for dockside repair services on the USCGC BERTHOLF (WMSL-750), a 418-foot National Security Cutter, requiring the contractor to supply all labor, services, materials, equipment, and personnel necessary to complete a range of maintenance and repair tasks, except as otherwise specified. The work includes critical system renewals and inspections such as the side boat davit, multiple flexible hoses for bow thruster, anchor windlass, gas turbine moisture separator, and wave guide dryer, along with overhauls of main drainage valves and the forward grey water pump discharge check valve. Additional tasks involve preserving and repairing slip-resistant deck coverings, installing new Elex dry air compressor equipment, inspecting and testing the Talon Grid and incinerator, cleaning and inspecting MP fuel storage and overflow tanks, and providing tenting on the stern deck. The scope also covers renewal of Nulka armor pad cover plates and preservation of general decks to maintain operational readiness. The solicitation, numbered 70Z08526QLREP0023, was posted on July 30, 2026, with a response deadline of August 24, 2026, and is classified as a combined acquisition under the Small Business Set Aside - Total category, identified by NAICS code 336611. The contract is managed by the SFLC Procurement Branch 2 under the Department of Homeland Security, with performance located in Alameda, California. Primary point of contact for inquiries is William Zittle, reachable via email and phone, with Mark Cap listed as secondary contact. The contract opportunity is accessible through the SAM.gov platform, and bidders must meet small business eligibility requirements as defined by the SBA.

Ship Building and Repairing

POSTED

DEADLINE

Fluid and Waste Handling ServicesThe contract entitled Fluid and Waste Handling Services requires on-site collection, containment, and disposal of machining fluids, fuel oil, and absorbents in full compliance with federal, state, and local environmental regulations. The work is performance-based and must be executed at a designated location in Seattle, Washington, with the contractor responsible for ensuring safe, legal, and environmentally sound handling practices throughout the service lifecycle. All activities are subject to oversight to maintain regulatory alignment and operational integrity. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 562112, and is open exclusively to small businesses as defined by the SBA. The opportunity was posted on July 28, 2026, with a response deadline of August 3, 2026, at 3:00 PM. The contracting agency is the Department of Homeland Security, specifically the SFLC Procurement Branch 2, and performance will occur at a facility in Seattle with a ZIP code of 98134. The contract type and set-aside designation prioritize small business participation, reinforcing compliance with federal small business acquisition policies.

Hazardous Waste Collection

POSTED

DEADLINE

Technical Documentation and Service ReportingThe contract requires the compilation and delivery of a final service report that comprehensively documents all repairs performed, precise measurements taken, test results obtained, and adherence to original equipment manufacturer specifications. Any approved deviations from OEM standards must be clearly identified and justified within the report to ensure full transparency and compliance. The deliverable must be thorough, accurate, and structured to meet rigorous technical documentation requirements. This is a small business set-aside subcontract under NAICS code 541611, issued by the Department of Homeland Security’s Sflc Procurement Branch 2, with performance required in Seattle, Washington, 98134. The solicitation was posted on July 28, 2026, and responses are due by August 3, 2026, emphasizing a tight turnaround window for qualified small businesses to submit proposals. The contract focuses on technical reporting services rather than physical repairs, placing emphasis on documentation integrity, regulatory alignment, and precision in recording service outcomes.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Hydrostatic Testing and Leak VerificationThe contract requires the performance of post-installation hydrostatic testing on a repaired cylinder block to validate sealing integrity and confirm the absence of jacket water leakage or sump intrusion. This testing is a critical verification step to ensure the mechanical reliability and safety of the repaired component following maintenance work. The work is governed under a Small Business Set-Aside classification, meaning only small businesses are eligible to compete, and it is categorized under NAICS code 541380, which relates to other scientific and technical consulting services. The solicitation was posted on July 28, 2026, with a response deadline of August 3, 2026, at 3:00 PM, and the place of performance is specified as Seattle, Washington, with a ZIP code of 98134. The contract is issued by the SFLC Procurement Branch 2 under the Department of Homeland Security, though no point of contact details are provided and the exact office address is unspecified. Interested parties must submit responses through the provided SAM.gov portal before the deadline to be considered.

Testing Laboratories and Services

POSTED

DEADLINE

Oversize Sleeve Supply and Material FabricationThe contract calls for the supply and fabrication of a custom .044-inch oversize lower liner, part number 2501083, specifically designed for the ALCO 251E8MGS diesel generator. This component requires precise engineering and material selection to ensure compatibility and performance under operational stress, with strict adherence to dimensional tolerances. Full material certification and comprehensive dimensional validation are mandatory to verify compliance with technical specifications, ensuring the part meets the required standards for reliability and longevity in a high-performance engine environment. This is a small business set-aside subcontract under the SBA program, exclusively available to small businesses as defined by the FAR 19.5 regulations. The NAICS code 332111 identifies the industry as forging and stamping, indicating the fabrication process involves specialized metal forming techniques. The solicitation was posted on July 28, 2026, with responses due by August 3, 2026, and performance is expected to take place in Seattle, Washington, with a zip code of 98134. The contracting entity is the SFLC Procurement Branch 2 under the Department of Homeland Security, and the opportunity is accessible through the SAM.gov portal.

Iron and Steel Forging

POSTED

DEADLINE