Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture of Ship’s Bells with Mercury-Activated Components

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the full fabrication of eleven ship’s bells with the integrated installation of portable fluorescent lamps and mercury-containing instruments, all governed by strict military specifications for durability, permanent marking, and proper hazardous material labeling. Each unit must meet exacting standards to ensure operational reliability and regulatory compliance in naval environments, with special attention to safety protocols surrounding mercury handling and disposal. The work is classified as a subcontract under NAICS code 335311, and performance is to be completed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by July 31, 2026, with no set-aside designation applied. The contracting activity falls under the ASC Commodities Division of the Department of Defense, and all deliverables must align strictly with federal defense requirements for equipment containing hazardous substances.

General Info

Fabricate eleven ship’s bells with lamps and mercury instruments, meeting military specs for durability and hazardous material compliance in New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full fabrication of 11 ship’s bells (NSN: 6350-01-510-3385), including integration of portable fluorescent lamps and mercury-containing instruments. Must meet military specifications for durability, marking, and hazardous material labeling.

Similar Contracts

Same NAICS industry code

CABLE ASSEMBLY, POWE

Solicitation # SPE4A6-26-T-10ET

The contract pertains to the procurement of two cable assemblies identified by NSN 6150-01-696-0420 under solicitation SPE4A6-26-T-10ET, with a delivery requirement of five days after order award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the acquisition type and timing of solicitations or amendments. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero acceptance criteria unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item is required per RQ017, and there is no shelf life constraint. Configuration changes require formal engineering change proposals and variance requests. The item contains technical data subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons anywhere, including within the U.S., and mandates compliance with DFARS 252.225-7048. Only DLA contractors with approved JCP certification, completed export-controlled data training, and DLA authorization may access the technical data. The place of performance is Camp Pendleton, California, and inquiries should be directed to Gloria Frimpong at the provided contact details.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

COVER, BATTERY RETAI

Solicitation # SPE7L7-26-T-4488

The contract pertains to the procurement of one battery retainer cover, identified by NSN 6160-01-566-3862 and part number 87705430, supplied by CNH Industrial America LLC. Delivery is required within ten days FOB origin to Fort Stewart, Georgia, with no quantity variance permitted. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 alongside mandatory adherence to MIL-STD-129 for marking and labeling. Packaging must also meet DLA’s RP001 requirements, with palletization following specified guidelines. The item is classified as commercial off the shelf, with adequate catalog data available for evaluation. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item must not contain intentionally added mercury or mercury compounds except in functional components such as batteries or certain sensors, and portable mercury-containing devices must include shockproof construction and a secondary containment boundary as defined by NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List, which supersedes other standards. Shipment must be sent via the fastest traceable method, excluding parcel post, with all documentation and marking referencing the required identifiers including the DD Form 250, shipping address, and project code TP 2. The solicitation number is SPE7L7-26-T-4488, with a proposed delivery date of July 21, 2026, and a response deadline of August 10, 2026.

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

CABLE, MOTOR POWER

Solicitation # N0010426QND81

This contract pertains to the manufacture and delivery of CABLE, MOTOR POWER under solicitation N0010426QND81, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is governed by detailed technical specifications referenced primarily to drawing 8630046-1 and is subject to strict compliance with MIL-STD-129 for marking, MIL-STD-973 for configuration control, and NAVSEA S9320-AM-PRO-020/MLDG for manufacturing certification, which mandates that only certified vendors may produce the item and must provide a Test Inspection Report with each delivery. The cable must be mercury-free and free from contamination, with explicit prohibitions against mercury use unless written approval is obtained, accompanied by safety protocols and warning labels. Quality assurance requires adherence to ISO 9001, with contractors responsible for all inspections and recordkeeping retained for four years post-delivery. Packaging must conform to MIL-STD-2073, and performance is subject to government inspection rights. The contract includes an option to increase quantity by up to the specified limit within 365 days of award without re-solicitation, and pricing must be provided for both base and optional quantities. Evaluation will be based on the lowest aggregate total price. The acquisition is issued under Emergency Acquisition Flexibilities, rated under the Defense Priorities and Allocations System (DPAS), and designated as a Total Small Business Set-Aside. Contractors must comply with Buy American Act provisions, cybersecurity maturity certification requirements, and the mandatory use of Workflow Pro (WFP) for payment processing. All contractual documents are deemed issued upon electronic transmission, and acceptance requires bilateral agreement. The point of contact is James E. Lewis, reachable via email, and responses must be submitted by August 28, 2026. Subcontracting plans, veteran and disability equal opportunity clauses, and security prohibitions apply, with all subcontractors bound by the same terms, particularly regarding mercury restrictions and quality systems.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

Critical Electromechanical Component Supply – AC MotorThe contract seeks the procurement and delivery of a single COPELAND LP 5M9B9 AC motor with part number 950-0298-01, requiring full compliance with military packaging, marking, and hazardous material handling standards to ensure operational readiness and safety during transportation and storage. The item is critical to electromechanical systems within defense applications, and the supplier must adhere strictly to military specifications without deviation. This is a subcontract under the NAICS code 335311, issued by the Department of Defense through the MARITIME SUPPLY CHAIN office, with performance to be conducted at FPO, 09556. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with no set-aside classifications applied. The contract is accessible via the DIBBS platform for qualified vendors to submit proposals.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Power Transformer Supply and DeliveryThe contract calls for the procurement and delivery of one military-spec power transformer identified by NSN 5950013179358, requiring full compliance with Department of Defense and Defense Logistics Agency technical, quality, and packaging standards. The transformer must meet rigorous military specifications to ensure operational reliability in demanding environments and is intended for use at Fort Eustis, with delivery expected to fulfill a specific logistical requirement within the Department of Defense supply chain. The solicitation is structured as a subcontract under NAICS code 335311, targeting manufacturers or suppliers qualified to produce defense-grade electrical equipment. Submissions must be received by August 10, 2026, with the opportunity posted on July 28, 2026, through the DIBBS platform, and all bidders are expected to adhere to DoD procurement protocols without any set-aside provisions specified. The contracting activity is managed by the Maritime Supply Chain under the Department of Defense, and performance is required at the designated facility in Fort Eustis, Virginia. All materials must be packaged and labeled according to federal and military regulations to ensure seamless integration into the defense logistics network upon delivery.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Heat Detector Assemblies (NSN: 6350015899186)The contract calls for the supply and delivery of 34 units of Heat Detector Assembly, identified by NSN 6350015899186 and part number SAH-04400-01, with strict adherence to military packaging, labeling, and documentation requirements to ensure full compliance with defense standards. All units must be delivered to the specified place of performance in Tracy, California, with zip code 95304-5000, and are subject to the rigorous quality and procedural controls typical of Department of Defense contracts. The solicitation, issued under the NAICS code 335311 for Electromedical and Electrotherapeutic Apparatus Manufacturing, is classified as a subcontract and was posted on July 28, 2026, with responses due no later than August 10, 2026. The contracting activity is managed by DLA Dist San Joaquin under the broader authority of the Department of Defense, and the full details can be accessed via the provided DIBBS link.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Power Supply Unit Design & ManufacturingThe contract entails the full design, engineering, and production of a military-spec power supply unit that must meet stringent performance, environmental, and reliability standards required for defense applications. This includes end-to-end development from circuit design and precise component selection through prototype validation and final manufacturing, ensuring compliance with all military specifications. The work must be executed with rigorous attention to durability, operational stability under extreme conditions, and adherence to defense-grade quality controls throughout each phase. The solicitation is classified as a subcontract under NAICS code 335311 and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Responses are due by August 10, 2026, with the solicitation posted on July 28, 2026, providing a narrow window for qualified entities to submit proposals. The entity seeking this subcontract must demonstrate proven capability in delivering mission-critical power systems compliant with defense standards and have the infrastructure to support secure, high-integrity production.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Cable Assembly Manufacturing (NSN 6150-01-648-5890)A subcontract has been issued for the manufacture and delivery of a military-spec cable assembly conforming to technical drawing 1NUW7 11582813, with a National Stock Number of 6150-01-648-5890. The work encompasses full production, rigorous testing, and strict adherence to defense logistics standards to ensure operational reliability and compliance with Department of Defense requirements. The contract is associated with the NAICS code 335311, indicating classification under wiring device manufacturing, and performance is designated for Fort Bragg, North Carolina, with a delivery target of 28310. The solicitation was posted on July 28, 2026, with a firm response deadline of August 5, 2026. The awarding organization is the ASC Commodities Division under the Department of Defense, indicating direct alignment with defense supply chain logistics. While no set-aside provisions or specific point of contact details are provided, the procurement process is conducted through the DIBBS platform, requiring potential vendors to submit proposals via the official link by the stated deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L7-26-T-4486

The contract is for the procurement of 10 battery boxes under NSN 6160016514898, issued as a service-disabled veteran-owned small business set-aside solicitation with NAICS code 335311. The items must be delivered FOB origin with no quantity variance allowed, and final inspection and acceptance occur at the destination—DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The delivery schedule requires shipment by March 20, 2027, corresponding to a 221-day ADO timeline from the original required delivery date of October 14, 2026. Packaging must strictly adhere to MIL-STD-2073-1E, with unit packaging using a fiberboard box, jute cloth cushioning, moisture-proof interior, and no preservative or wrap materials. Palletization follows DLA’s RP001 requirements, while marking must comply with MIL-STD-129, including U.S. government identification and barcoding, with no special markings required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless specified, and critical attributes are subject to stringent verification levels. The contractor is responsible for permanent physical identification of the item per RQ017, and all technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The contract mandates electronic invoicing through WAWF and compliance with cybersecurity safeguards under FAR 52.240-93, with deviations noted for several clauses. Hazard communication requirements under DFARS 252.223-7001 apply if any materials are hazardous, requiring prior submission of labels and MSDS. The offeror must represent its small business and socioeconomic status, disclose UEI and CAGE codes, and comply with all applicable representations in Section K. The contract does not include explicit pricing in Section B, leaving total value undefined, and no award evaluation factors or subcontracting plans are detailed beyond general clauses on small business subcontractor payments.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-10AM

This contract specifies the procurement of a specialized electrical branched cable assembly identified by NSN 6150-01-453-2729, with a quantity of 13 units required for delivery within 66 days after award. The item is subject to stringent technical and quality controls under the DLA Master List of Technical and Quality Requirements, and must comply with MIL-STD-130 for Item Unique Identification (IUID), with the DFARS 252.211-7003 clause mandating proper marking and tracking. Export control restrictions apply due to the presence of technical data governed by either ITAR or EAR, prohibiting unauthorized disclosure or transfer to foreign persons, including those within the U.S., and requiring contractors to hold valid JCP certification, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled information under DFARS 252.225-7048. Packaging must adhere to DLA procurement standards, and non-accepted supplies must have all government identification removed. The solicitation is a Total Small Business Set-Aside under NAICS code 335311, issued by the Department of Defense’s ASC Commodities Division with a response deadline of August 5, 2026, and performance located in New Cumberland, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-09ZL

The contract pertains to the procurement of one unit of an Alarm Monitor with NSN 6350017021049 and part number R928056759 manufactured by Bosch Rexroth Corporation, designated as a critical application item. Delivery is required within ten days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly adhere to MIL-STD-2073-1E with specific preparation codes, including preservation method 10, container type E5, and packing code U. Marking must comply with MIL-STD-129 without special markings, and palletization follows DLA packaging requirements. The item has no shelf life requirement, and sampling methods must conform to MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is Fort Bliss, Texas, under the military freight shipping address and marking for W4546F, with shipment required via the fastest traceable means excluding parcel post. The contract is issued under solicitation SPE4A6-26-T-09ZL, with a response deadline of August 5, 2026, and primary point of contact is Berkeley Vaughan. Technical and quality requirements referenced in the DLA Master List apply, including documentation for source approval, removal of government identification from non-accepted supplies, and handling of covered defense information. The unit of issue is each, and the item is classified under NAICS code 335311 for federal procurement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-10AQ

This contract specifies the procurement of two commercial off-the-shelf cable assemblies with part numbers D920-01-W8 and MW0909-1MF-W8, identified by NSN 6150-01-532-1996, under solicitation SPE4A6-26-T-10AQ. The items are classified as critical application components and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date. Delivery is required within 20 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Each unit must be packaged in strict accordance with MIL-STD-2073-1E, using packaging method 10, drying, and labeling per MIL-STD-129 with no special marking. Palletization follows DLA packaging guidelines, and the items are to be delivered to Scholfield Barracks, Hawaii, with transportation governed by DLAD procedural notes C19 and C20. The contract mandates exact quantity compliance with zero variance and requires the supplier to meet all documentation requirements for source approval, including submission of a source approval request as outlined in RC001. Government identification must be removed from non-accepted supplies per RQ011. The unit of issue is each (EA), with a total price of $2.00 per unit and a total contract value of $4.00. The required delivery date is July 27, 2026, and the primary point of contact is Larry Ferguson of the ASC Commodities Division, Department of Defense. The contract is subject to DLA’s standardized administrative and logistics protocols, with the procurement classified under NAICS code 335311 and tied to project TP3. All data, including the supplier’s address and military unit designation, is provided for accurate fulfillment and tracking, with government-only fields marking internal administrative identifiers.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 14 hours ago

DEADLINE

Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply Chain Documentation & Traceability ManagementThe contract requires the creation and ongoing maintenance of comprehensive traceability documentation for all manufactured items, ensuring full accountability from raw material sourcing through production to final inspection. This includes securing and organizing material certifications, detailed process records, and inspection data to meet rigorous audit and government inspection requirements at the origin point. The documentation must be accurate, complete, and readily accessible to support compliance with defense standards and regulatory obligations. This subcontract, issued under the Department of Defense’s ASC Commodities Division, falls under NAICS code 541618 and is focused on supply chain documentation and traceability management. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026. Performance is expected to occur at the contractor’s facility or designated manufacturing site, though specific location details are not provided. There is no set-aside classification indicated, and the work is critical to maintaining defense supply chain integrity through transparent, auditable records.

Other Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.

Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the packaging of finished cable assemblies in strict accordance with MIL-STD-129, ensuring all assemblies are properly labeled, marked, and documented for military logistics and shipment. This includes the accurate application of hazard warning labels on all packages containing hazardous materials, with full compliance to the OSHA Hazard Communication Standard to ensure safety and regulatory adherence throughout handling and transport. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for truck transportation, though the nature of the work is focused on military-grade packaging and hazard labeling rather than transportation services. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to align with federal defense supply chain requirements.

Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

Source-Controlled Component SupplyThe contract entails the supply of source-approved electrical components specifically designated for use in the fabrication of cable assemblies, requiring full traceability from manufacturer to final assembly and comprehensive documentation to ensure compliance with all technical and regulatory standards. All components must meet stringent source control requirements, with proven adherence to DFARS data rights and limited rights clauses, ensuring that intellectual property and technical data are handled in accordance with federal defense contracting mandates. The supplier is responsible for maintaining rigorous quality control and documentation protocols to support audit readiness and mission-critical performance. This subcontract is issued under the NAICS code 423690 and is administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with bids due by August 11, 2026, and performance is expected to support defense-related infrastructure, though the exact place of performance is not specified. While no set-aside status is indicated, the contract mandates full compliance with federal sourcing and data handling regulations, making it suitable only for vendors with proven experience in supplying controlled electronic components to U.S. defense programs.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.

Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.

Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Defense-Compliant Packaging, Preservation, and Labeling ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services for critical bearings used in military applications, adhering strictly to MIL-STD-129 for labeling, MIL-STD-2073-1E for preservation standards, and RP001 for palletization. All deliverables must ensure full traceability and seamless integration with the prime contractor’s existing traceability systems, which demands precise documentation and rigorous quality control throughout the process. The services are essential to maintaining operational readiness and compliance with Department of Defense supply chain requirements. This subcontract, issued by the ASC Commodities Division under the Department of Defense, targets vendors capable of handling high-stakes defense components with exacting military specifications. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 561910 for other support activities for transportation. Performance is expected to align with government logistics networks, and while specific location details are not provided, the work must support the broader defense supply chain infrastructure. Vendors must demonstrate proven experience in military packaging standards and the technical capability to interface securely and accurately with established traceability platforms.

Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

Cylindrical Roller Bearing Manufacturing and SupplyThe contract requires the manufacture and delivery of 200 cylindrical roller bearings meeting strict military specifications, with all production activities limited to the United States, its outlying areas, or Canada. At least 50 percent of the total component cost must originate from these regions to satisfy domestic content compliance requirements. Full documentation and successful completion of First Article Testing are mandatory to verify conformance to performance, dimensional, and quality standards before量产. The work is classified as a subcontract under NAICS code 332991, and the solicitation is managed by the ASC Commodities Division within the Department of Defense. Responses must be submitted by August 12, 2026, with the contract opportunity posted on July 29, 2026, and all deliverables must be performed in accordance with defense procurement protocols to ensure reliability and traceability for military use.

Ball and Roller Bearing Manufacturing

POSTED

about 14 hours ago

DEADLINE