Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Supply Packaging & Labeling Compliance

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires secondary packaging, labeling, and marking of surgical razors to meet strict military standards including MIL-STD-129, hazard communication regulations, and all applicable Department of Defense requirements. The work must ensure that each unit is properly contained, labeled, and marked for secure handling, storage, and distribution within the military supply chain. Compliance with these standards is non-negotiable and must be validated through documented processes to ensure readiness and traceability in field operations. Performance is to be conducted in support of the Medical Supply Chain MD SURG FSF under the Department of Defense, with the place of performance listed as FPO, ZIP 09588-2304. The solicitation, issued as a subcontract under NAICS code 325998, was posted on August 5, 2026, with responses due by August 11, 2026. Offerors must demonstrate capability to fulfill precise military packaging and labeling protocols, ensuring the surgical razors are packaged for operational use while adhering to all safety, identification, and logistics specifications mandated by federal defense standards.

General Info

Package, label, and mark surgical razors per military standards for DoD supply chain at FPO ZIP 09588-2304.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

FPO, AE, 09588-2304, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Secondary packaging, labeling, and marking of surgical razors in compliance with MIL-STD-129, hazard communication standards, and DoD requirements.

Similar Contracts

Same NAICS industry code

Refrigerant Recycling and ReclamationThe contract pertains to the reprocessing of recovered refrigerants to meet AHRI-700 purity standards through a series of technical processes including distillation, filtration, and comprehensive purity testing, ensuring the reclaimed refrigerants are suitable for reuse in commercial HVAC and refrigeration systems. This work requires strict adherence to industry-certified protocols to guarantee the safety, efficiency, and environmental compliance of the reclaimed product. The agreement is structured as a subcontract under the Solid Waste & Resource Recovery initiative by the State of Florida, with a North American Industry Classification System code of 325998, indicating it falls under other miscellaneous chemical product manufacturing. The solicitation was posted on August 6, 2026, with responses due by August 26, 2026, at 9:00 PM Eastern Time. The work is expected to be performed within Florida, though the precise location is not specified, and all activities must align with state and federal environmental regulations governing refrigerant handling and recovery.

Solid Waste & Resource Recovery

POSTED

about 10 hours ago

DEADLINE

Winter Weather Material Supply

Texas Department of Transportation

POSTED

about 11 hours ago

DEADLINE

Raw Material Supply for Nonmetallic Seals

LAND SUPPLY CHAIN

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract seeks the supply of military-qualified electrostatic discharge and electromagnetic interference protective packaging materials compliant with MIL-PRF-81705, specifically including Types I and III barrier materials listed on the Qualified Products List for this specification. These materials are critical for safeguarding sensitive electronic components within defense systems against damage from static electricity and electromagnetic interference during transport and storage. The requirement is structured as a subcontract under the Department of Defense’s Maritime Supply Chain, with performance expected to be based in Columbus, Ohio, and the materials must meet exacting military standards to ensure reliability in operational environments. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 325998 for other chemical product and preparation manufacturing. The contract does not specify a set-aside designation, indicating it is open to all eligible vendors without preference for small businesses or other categories. Potential suppliers must demonstrate compliance with the referenced military specification and provide materials certified under QPL-81705, ensuring proven performance and traceability. All submissions must align with the technical and quality requirements outlined in the referenced DIBBS solicitation system platform for consideration.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Glass Tubing SupplyThe contract calls for the supply of 34 units of colorless, round, annealed glass tubing meeting exact dimensional specifications, with all items required to be packaged and labeled in full compliance with applicable standards. Delivery must be made to the DLA warehouse in Tracy, California, with a zip code of 95304-5000, ensuring timely and accurate receipt of the material. The solicitation is classified as a subcontract under NAICS code 325998, and bids must be submitted by August 17, 2026, with the opportunity posted on August 5, 2026, through the DIBBS system. The contracting activity is managed by DLA San Joaquin under the Department of Defense, with no set-aside designation specified, indicating the opportunity is open to all eligible commercial suppliers.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Medical-Grade Packaging and LabelingThe contract requires the packaging of medical-grade hand sanitizer into 4 fluid ounce bottles with full compliance to OSHA’s Globally Harmonized System of Classification and Labelling of Chemicals, ensuring all hazard communication and safety labeling standards are met. Each package must also adhere to MIL-STD-129 military marking and shipping requirements, including durable identification tags, barcodes, and proper palletization for logistical handling within the Department of Defense supply chain. The work is to be performed at Fort Stewart, Georgia, with the delivery and compliance deadline set for August 11, 2026, and the solicitation was posted on August 5, 2026, under a subcontract arrangement. The NAICS code 325998 classifies this as other chemical product and preparation manufacturing, indicating the scope involves specialized formulation and packaging beyond standard consumer products, tailored for military medical use. All materials and processes must meet stringent federal standards for safety, traceability, and durability under field conditions.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Glass Tubing Supply and PackagingThe contract requires the procurement, packaging, and delivery of glass tubing under strict military and hazardous materials compliance standards, with zero tolerance for any deviation in quantity. All items must meet exact specifications to ensure safety and operational readiness, and packaging must adhere to regulatory requirements for hazardous substances during transport and handling. The work is to be performed for the Department of Defense through DLA Dist San Joaquin, with performance location set in Tracy, California, zip code 95304-5000. The North American Industry Classification System code is 325998, indicating a classification for other chemical product and preparation manufacturing. The solicitation is issued as a subcontract with a response deadline of August 17, 2026, and was posted on August 5, 2026. Participation is open without set-aside restrictions, and all submissions must be completed and submitted through the designated DIBBS platform before the deadline.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Electrical Insulation Tape Manufacturing & Supply

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Medical-Grade Packaging and LabelingThe contract requires the packaging and labeling of medical test kits in full compliance with Medical Marking Standard No. 1 MMS1C and MIL-STD-129, ensuring adherence to strict military and medical regulatory standards. Key deliverables include maintaining cold chain stability throughout storage and transport, implementing robust lot traceability systems for full lifecycle accountability, and applying accurate hazard labeling to meet safety and regulatory requirements. All work must be performed to support the Department of Defense’s Medical Supply Chain, with the place of performance designated as Suffolk, Virginia, 23435-5000. The solicitation is classified as a subcontract under NAICS code 325998 and is open for response until August 11, 2026, with the opportunity posted on August 5, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract encompasses specialized services for the proper handling, classification, packaging, and labeling of hazardous materials associated with fluid handling products, strictly adhering to the requirements of 29 CFR 1910.1200 and MIL-STD-129. These standards mandate accurate hazard communication, standardized container labeling, and compliant packaging procedures to ensure safety and regulatory alignment throughout the supply chain. All work must be performed in accordance with federal occupational safety guidelines and military logistics specifications to maintain consistency and accountability in the treatment of hazardous substances. The solicitation, issued under the NAICS code 325998 for Other Chemical Product and Preparation Manufacturing, is structured as a subcontract opportunity posted on August 5, 2026, with a response deadline of August 17, 2026. Performance is required at a designated location in Jacksonville, Florida, with the contract managed by the Fluid Handling Division under the Department of Defense. While no set-aside status or point of contact is specified, the opportunity is accessible through the DIBBS platform, and qualified vendors must demonstrate proven capability in hazardous material handling, labeling compliance, and adherence to DoD packaging protocols.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Specialized Materials (Hazardous or Critical Application)The contract pertains to the supply of specialized raw materials or components that must comply with hazardous materials standards as defined by FED-STD-313 or be designated as Critical Application Items requiring full traceability throughout the supply chain. These materials are essential for applications where safety, performance, and accountability are paramount, and suppliers must ensure rigorous documentation and adherence to federal specifications. The solicitation is issued as a subcontract under NAICS code 325998 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at a location in Tracy, California, zip code 95304-5000. Interested parties must submit responses by the deadline of August 13, 2026, following the procedures outlined in the official solicitation accessible via the DIBBS portal.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Additive Manufacturing Filament SupplyThe contract seeks the supply of industrial-grade filament specifically engineered for additive manufacturing systems used in defense applications, with all materials required to comply with federal logistics and defense supply chain standards. This subcontract is a total small business set-aside under the SBA program, meaning only qualified small businesses may bid, and the NAICS code 325998 identifies the category as other chemical product and preparation manufacturing. The performance location is designated as Tinker Air Force Base with a zip code of 73145-8000, indicating the filament will be delivered directly to a critical Department of Defense facility. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the contract is managed under the Department of Defense through the Depot Oklahoma office, emphasizing the strict quality and compliance controls expected for materials used in military-grade 3D printing operations.

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Hazardous Materials Handling and TransportationThe contract requires the safe packaging, labeling, and transportation of diagnostic kits that contain hazardous materials, ensuring full compliance with Department of Defense and Defense Logistics Agency standards for both sea and land shipments. All activities must adhere to rigorous safety and regulatory protocols to mitigate risks associated with transporting hazardous substances, with emphasis on precision in documentation, secure containment, and transport logistics tailored to military requirements. The place of performance is identified as JBER, 99506-4400, indicating the operational focus on this military installation. This is a subcontract under NAICS code 488999, which pertains to other support activities for transportation, and the solicitation is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The opportunity was posted on August 5, 2026, with a hard deadline for responses on August 11, 2026, leaving a narrow window for interested parties to submit proposals. There is no set-aside designation, meaning the contract is open to all qualified contractors regardless of business size or status. The official solicitation can be accessed via the DIBBS portal, where detailed technical and procedural requirements will be available for prospective bidders.

All Other Support Activities for Transportation

POSTED

DEADLINE

Small Business Set-Aside Participation OpportunitySmall businesses eligible under socioeconomic programs such as Women-Owned Small Business, Service-Disabled Veteran-Owned Small Business, HUBZone, or 8(a) are invited to pursue subcontracting opportunities in support of a prime contract for the supply of diagnostic test kits. This opportunity is tied to a Department of Defense procurement managed by the Medical Supply Chain MD Surg FSF, with performance required at Joint Base Elmendorf-Richardson in Alaska, specifically at the ZIP code 99506-4400. The North American Industry Classification System code 325414 identifies the scope as pharmaceutical and medicine manufacturing. The solicitation was posted on August 5, 2026, and responses must be submitted by August 11, 2026, with no formal solicitation number provided but accessible via the DIBBS platform at the listed URL. The opportunity is structured as a subcontract and specifically targets participation from designated small business categories to ensure inclusive contracting practices within the defense medical supply chain.

Biological Product (except Diagnostic) Manufacturing

POSTED

DEADLINE

Supply of Bacterial Test Kits (API 20 E)The contract involves the procurement and delivery of API 20 E test kits designed for the identification of Enterobacteriaceae and other Gram-negative rods, essential for medical and diagnostic applications. The supplier is required to meet strict compliance standards including proper packaging, accurate labeling, adherence to hazardous materials handling protocols, and mandatory MIL-STD-129 marking to ensure uniformity and traceability throughout the supply chain. The work must be performed and delivered to the designated location at JBER with ZIP code 99506-4400, indicating the operational focus on military medical logistics. The solicitation is categorized as a subcontract under NAICS code 325414, relating to pharmaceutical and medicine manufacturing, and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF organization. Responses are due by August 11, 2026, with the solicitation posted on August 5, 2026, providing a limited window for qualified vendors to submit proposals.

Biological Product (except Diagnostic) Manufacturing

POSTED

DEADLINE

Transportation and Delivery to Fort Stewart, GAThe contract requires the final delivery of packaged sterile abdominal pads to Fort Stewart, Georgia, with a strict delivery timeline of 20 days after award under FOB Destination terms, meaning the seller bears all transportation risks and costs until the goods arrive at the designated location. The work falls under NAICS code 484220, indicating it pertains to truck transportation of less-than-truckload freight, and is classified as a subcontract within the Department of Defense’s Medical Supply Chain network. The solicitation was posted on August 5, 2026, and responses are due by August 11, 2026, with performance targeted at the military installation with zip code 31314-5674. All logistics, including packaging, labeling, and transit, must ensure the products remain sterile and intact upon arrival at the destination.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Raw Materials for Abdominal PadsThe contract is for the supply of nonwoven fabric, cellulose absorbent core, and hydrophobic backing materials essential to the manufacturing of abdominal pads. These materials are critical components in medical products designed for wound care and surgical applications, with performance, consistency, and compliance to medical standards being imperative. The materials must meet technical specifications to ensure compatibility with the final product’s functionality, hygiene, and safety requirements. The procurement is structured as a subcontract under the Department of Defense’s Medical Supply Chain, with the place of performance specified as Fort Stewart, Georgia, 31314-5674. The solicitation, identified by the NAICS code 326212 for medical and surgical textile manufacturing, was posted on August 5, 2026, with responses due by August 11, 2026. All suppliers are expected to align with Defense Logistics Agency protocols and deliver materials that support the military’s healthcare logistics network without interruption.

Tire Retreading

POSTED

DEADLINE

Medical-Grade Packaging and LabelingThe contract requires commercial packaging and labeling of abdominal pads in sterile, sealed units that strictly adhere to MIL-STD-129 standards and the DLA Master List specifications. This subcontract is for the production and preparation of medical-grade packaging ensuring full compliance with Department of Defense requirements for military medical supply chain logistics. The work must be performed at the designated place of performance in Fort Stewart, Georgia, with all units delivered in a condition that maintains sterility and meets exacting labeling and packaging protocols for military use. The solicitation was posted on August 5, 2026, with responses due by August 11, 2026, under NAICS code 323113, which corresponds to medical and surgical instrument manufacturing. The contracting entity is the Medical Supply Chain MD Surg FSF under the Department of Defense, indicating the end-use is for military medical operations requiring reliable, traceable, and standardized packaging.

Commercial Screen Printing

POSTED

DEADLINE

Manufacturing of Sterile Abdominal PadsThe contract requires full-scale manufacturing of sterile abdominal pads compliant with military and federal specifications, encompassing every stage of production from sourcing raw materials through fabrication, rigorous quality control, proper packaging, and terminal sterilization to ensure sterility and readiness for medical use. The work must adhere strictly to standardized protocols for performance, safety, and durability, aligning with the demands of defense medical supply chains. Production is expected to meet exacting standards for consistency and reliability, as these pads are intended for field and clinical applications within federal healthcare systems. The solicitation is classified as a subcontract under NAICS code 326299, with a response deadline of August 11, 2026, and a posted date of August 5, 2026. The place of performance is designated as Fort Stewart, Georgia, with a zip code of 31314-5674, indicating that operational logistics, delivery, or final assembly must occur at or near this military installation. The contract is managed by the Department of Defense through its MEDICAL SUPPLY CHAIN MD SURG FSF office, signaling a direct alignment with military medical readiness priorities. All submitted proposals must demonstrate proven capability in sterile medical product manufacturing and compliance with federal regulatory and defense procurement requirements.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Disposable Tracheal Tube Stylets SupplyThe contract is for the supply of sterile, disposable tracheal tube stylets constructed with aluminum and PVC coating, specifically designed to fit endotracheal tubes with an inner diameter ranging from 7.5 mm to 10 mm for use in airway management procedures. These stylets are intended for single-use in clinical settings and must meet strict sterility and performance standards to ensure safe and reliable intubation. The procurement is issued as a subcontract under the NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector. The offering is part of the Department of Defense’s Medical Supply Chain initiative, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF, with performance required at Fort Stewart, Georgia, under the zip code 31314-5185. Responses to this solicitation must be submitted by August 11, 2026, with the request published on August 5, 2026, through the DIBBS platform. There is no set-aside classification specified, meaning the opportunity is open to all qualifying contractors without restrictions based on business size or ownership type. While no specific point of contact is listed, interested parties are directed to the public DIBBS link for full documentation and submission instructions. The stylets must conform to all applicable regulatory and technical specifications for medical devices, including sterility, biocompatibility, and mechanical integrity, to ensure compatibility with standard endotracheal tubes used in military and civilian healthcare environments.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires the packaging and labeling of test lungs in full compliance with MIL-STD-129 and MMS NO. 1 standards, ensuring all items are properly marked with serialized military labels, accurate DoDAAC routing codes, and clear destination markings for delivery to Department of Defense recipients. All work must adhere strictly to federal military packaging regulations to guarantee safe handling, traceability, and compliance throughout the supply chain. The performance location is designated as APO 09094-3219, and the contract is classified as a subcontract under NAICS code 561910 for other support services. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract requires the preparation and submission of Safety Data Sheets and hazard warning labels for a test lung that may contain regulated materials, ensuring full compliance with DFARS and OSHA regulations. All documentation must accurately reflect the chemical composition, hazards, and handling procedures associated with the materials, meeting federal standards for workplace safety and defense contracting. The work is part of a subcontract under the Medical Supply Chain MD Surg FSF, managed by the Department of Defense, and must be completed to support critical medical research or supply chain initiatives. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, indicating a tight turnaround for submissions. The NAICS code 541620 classifies this as scientific and technical consulting services, highlighting the specialized expertise needed for regulatory compliance and hazardous materials documentation. The place of performance is listed as APO with zip code 09094-3219, suggesting the work may involve overseas or military logistics coordination. Contractors must be fully versed in U.S. defense procurement requirements and capable of delivering compliant documentation under a strict timeline without room for error.

Environmental Consulting Services

POSTED

DEADLINE

Supply of 1-Liter Ventilator Test LungsThe contract seeks the supply and delivery of commercial off-the-shelf 1-liter test lungs designed specifically for use with ZOLL IMPACT Series 731 and 754M ventilators, intended for calibration, testing, or training purposes. These test lungs must meet exact technical specifications to ensure accurate performance validation and functional consistency with the listed ventilator models, supporting medical equipment readiness and operator proficiency. The requirement is structured as a subcontract under the NAICS code 339113, indicating classification within medical equipment manufacturing, and is managed by the Department of Defense through its MEDICAL SUPPLY CHAIN MD SURG FSF office. The solicitation was posted on August 5, 2026, with a strict response deadline of August 11, 2026, allowing only a six-day window for submissions. The place of performance is designated as APO with ZIP code 09094-3219, signaling delivery to a U.S. military overseas or expeditionary location, likely for immediate field use or logistical distribution. No set-aside provisions are indicated, meaning the contract is open to all qualifying vendors regardless of business size or affiliation, and no point of contact details are provided, suggesting that inquiries must be directed through the official DIBBS portal linked in the posting.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on August 5, 2026, with a response deadline of August 11, 2026, and is classified as a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain MD Surg FSF. The place of performance is designated as Fort Campbell with a zip code of 42223-5000, though no specific city, state, or country details are provided beyond that. The solicitation number is not available, and the NAICS code is listed as NA, indicating a lack of standard classification. There is no information provided regarding set-aside type, organization type, or point of contact, and the system is unable to decompose the prime contract’s scope, statement of work, or CLINs due to technical issues. The only actionable link provided directs to a DIBBS platform page for the request for quotation with identifier SPE2DS26T312R.

POSTED

DEADLINE