Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires the packaging of earphone elements in full compliance with MIL-STD-2073-1E standards, specifying unit pack configurations, air intermodal compatibility, and the use of the CLNG/DRY preservation method without any cushioning or additional wrapping materials. The work must adhere strictly to military specifications for durability, environmental protection, and handling during transport and storage, ensuring the components remain protected and functional under extended storage and operational conditions. The solicitation is issued as a subcontract under the NAICS code 323113, which pertains to printing and related support activities, though the technical focus is on packaging and preservation. It is managed by the Department of Defense through the Maritime Supply Chain office, with performance designated for New Cumberland, Pennsylvania, ZIP 17070-5002. The opportunity was posted on August 3, 2026, with a firm deadline for responses on August 14, 2026, and all submissions must meet the exacting requirements of the military standard without deviation, as no padding, wrapping, or alternative preservation methods are permitted.

General Info

Pack earphones per MIL-STD-2073-1E using CLNG/DRY method, no cushioning, New Cumberland, PA, due August 14, 2026

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

323113 - Commercial Screen PrintingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging of earphone elements per MIL-STD-2073-1E, including unit pack, air intermodal compatibility, and CLNG/DRY preservation method without cushioning or wrapping.

Similar Contracts

Same NAICS industry code

Military-Grade Packaging and PalletizationThe contract requires the delivery of packaging gaskets that meet stringent military specifications, specifically MIL-DTL-117, TYPE II, CLASS C, STYLE 1, ensuring they are sealed in waterproof, greaseproof, and UV-resistant bags to withstand harsh environmental conditions. These gaskets must be precisely packaged to maintain integrity during storage and transit, with strict adherence to material and sealing standards defined by the military. All shipments must also be palletized in accordance with DLA RP001 logistics standards, ensuring uniform size, weight distribution, labeling, and secure strapping for efficient handling within defense supply chains. The packaging and palletizing process must support seamless integration into military logistics systems and enable rapid deployment. This subcontract is issued under NAICS code 323113, indicating it relates to printing and related support activities, though the core scope focuses on specialized packaging and material handling for defense components. The opportunity was posted on August 3, 2026, with bids due by August 14, 2026, and performance is expected to be delivered to Jacksonville, Florida, at ZIP code 32212-0103. The contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support office, highlighting its importance to vehicle and equipment readiness. Compliance with all technical, logistical, and quality requirements is mandatory, and failure to meet the specified standards could result in rejection of deliverables.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Medical Device Packaging and Labeling ServicesThe contract requires comprehensive packaging, marking, and labeling services for medical devices in full compliance with military standards, specifically MIL-STD-2073-1E and MMS NO. 1, ensuring all items meet rigorous defense logistics requirements. Work must be performed to support the Department of Defense’s Medical Supply Chain, with the place of performance designated as APO 96260-5479, indicating operations will be conducted to serve overseas or military installations. The solicitation is issued as a subcontract under NAICS code 323113, which classifies it within the medical equipment and supplies manufacturing sector. All responses are due by August 10, 2026, with the opportunity posted on August 3, 2026, providing potential vendors approximately one week to prepare and submit their proposals. The contract is part of a broader effort to maintain standardized, reliable, and traceable medical supply systems for military operations.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Packaging and Labeling ComplianceThe contract requires compliant medical packaging, preservation, and labeling according to MMS No. 1 and MIL-STD-2073-1E standards, ensuring all medical supplies are properly protected and documented for military use. Hazardous materials must be labeled in strict adherence to OSHA regulations, covering identification, handling, and safety information for transported medical items. All work must meet rigorous defense logistics requirements to maintain the integrity, safety, and readiness of medical supplies throughout the supply chain. This subcontract is issued under NAICS code 323113 by the Department of Defense through the Medical Supply Chain Pharm FSA, with performance located at APO 96260-5479. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026. Contractors must be prepared to demonstrate full compliance with federal military standards and hazardous material protocols, supporting critical medical operations in a global defense context.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Packaging, Labeling, and Marking Services for DoD ShipmentsThe contract requires comprehensive commercial packaging, preservation, and labeling of electronic components to meet stringent Department of Defense standards, including MIL-STD-129P for shipping labels, MIL-STD-130 for Item Unique Identification with IUID marking, and TCN labeling using Data Matrix barcodes. All work must ensure full compliance with DoD traceability and identification protocols, guaranteeing accurate inventory control and logistics tracking throughout the defense supply chain. The services are critical to maintaining operational readiness and regulatory adherence for military shipments. This is a subcontract solicitation posted on August 3, 2026, with a response deadline of August 14, 2026, under NAICS code 323113 for other electromagnetic and electronic component manufacturing. The contracting activity is managed by the Albany Transportation Officer under the Department of Defense, though specific performance location and point of contact details are not provided. Interested parties must submit proposals through the DIBBS system using the solicitation reference SPRAL126Q0090, with no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

Military-Grade Packaging & Labeling ServicesThe contract requires the provision of compliant packaging, labeling, and Data Matrix barcode printing services specifically for hose assemblies, adhering strictly to MIL-STD-2073-1E and MIL-STD-129 standards along with all applicable shelf-life requirements. All deliverables must meet rigorous military specifications to ensure proper identification, handling, storage, and traceability throughout the supply chain. The work is targeted toward a Small Business Set-Aside under the SBA program, with the NAICS code 323113 indicating the industry class, and is categorized as a subcontract opportunity issued by the Nuclear Reactor Program under the Department of Defense. Performance of the contract is mandated to occur in San Diego, CA, with a zip code of 92136-3581, and responses must be submitted by August 9, 2026, following a solicitation posted on August 3, 2026. All packaging and labeling must be fully functional and compliant for use in defense logistics systems, ensuring compatibility with automated recognition and inventory tracking processes.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires the provision of specialized packaging and labeling services for O-rings in strict compliance with MIL-DTL-117, Type II, Class C, Style 1, which mandates the use of waterproof, greaseproof, and opaque bags to ensure protection against environmental contaminants. Labeling must adhere to MIL-STD-129 standards, ensuring accurate, standardized identification and traceability throughout the supply chain. The work may be performed by a subcontractor if the prime contractor lacks the in-house capacity, allowing flexibility in execution while maintaining regulatory adherence. The packaging and labeling must be suitable for military logistics and long-term storage under demanding conditions. This solicitation is issued under the NAICS code 323113 for Other Printing and Related Support Activities, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The place of performance is designated as Hill Air Force Base with ZIP code 84056-5734. The opportunity is classified as a subcontract and was posted on August 3, 2026, with a response deadline of August 14, 2026. All offerings must meet the exacting military specifications without deviation, and compliance is non-negotiable for award eligibility.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Medical-Grade Packaging and Labeling ServicesThe contract requires the provision of military-compliant packaging and labeling services for sterile medical units, adhering strictly to MIL-STD-2073-1E and MMS1A standards. This includes the application of shelf-life indicators, hazard warnings, and all required labeling elements to ensure compliance with Department of Defense specifications for storage, handling, and transport. The packaging must maintain sterility and integrity under operational conditions and include accurate, legible, and durable markings that meet federal military requirements. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with a NAICS code of 323113 indicating medical manufacturing and packaging services. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026. The place of performance and specific office address are not detailed, but performance is expected to support U.S. military medical supply chains. Interested parties must respond through the DIBBS portal prior to the deadline to be considered.

Defense Logistics Agency

POSTED

DEADLINE

Packaging and Kitting of Medical DevicesThe contract requires the packaging, preservation, unitization, and labeling of barrier sleeves in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards to meet military shipment and storage requirements. This work is part of a subcontract under the Medical Supply Chain FSH, with all activities focused on ensuring medical devices are prepared for secure, long-term storage and transportation within the Department of Defense logistics network. The packaging must adhere to government-mandated specifications for durability, environmental protection, and traceability, with each unit properly labeled and organized for efficient handling and inventory management. Performance of the contract is centered at Peterson Air Force Base, Colorado, with a firm deadline for responses by August 10, 2026. The North American Industry Classification System code 323113 identifies the work as medical equipment and supplies manufacturing, indicating the specialized nature of the kitting and packaging tasks involved. The subcontract is issued under a government procurement mechanism, implying full alignment with federal defense contracting directives, and suppliers must demonstrate capability to meet the exacting standards of military logistics without deviation. All work must ensure complete compliance with federal regulations for defense logistics, including precise documentation, quality controls, and delivery timelines.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Packaging and Labeling Services for Regulated Medical SuppliesThe contract requires the provision of compliant packaging and high-precision labeling for litmus paper used in regulated medical applications. Each unit must be foil-sealed and grouped in increments of 30, with outer containers optimized for cost-effective transport using the lowest-cost carrier while maintaining integrity and compliance. Full traceability markings must be included across all packaging levels to ensure end-to-end accountability within the supply chain. The work is to be performed at Beale AFB, California, with a zip code of 95903-1908, and must meet the stringent regulatory standards applicable to medical supplies under Department of Defense oversight. The NAICS code 323113 indicates this is a printing and related support activities subcontract, with a response deadline of August 10, 2026, and the solicitation was posted on August 3, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Packaging, Marking, and UII Labeling Services

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

Packaging and Labeling of Medical Test KitsThe contract requires secure packaging of medical test kits in sealed containers that meet all applicable medical and federal regulatory standards for safety, integrity, and traceability. Labeling must comply with stringent guidelines to ensure accurate identification, handling, and use of the test kits throughout the supply chain, including proper documentation of contents, lot numbers, expiration dates, and handling instructions. The work is classified as a subcontract under NAICS code 323113, indicating it involves medical equipment and supplies manufacturing, and is being procured by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF organization for performance at an FPO address with ZIP code 96691. Bidders must submit responses by the deadline of August 10, 2026, following all technical and compliance requirements outlined in the solicitation. The packaging and labeling processes must adhere to federal medical standards and ensure the kits remain uncontaminated and fully traceable from final assembly through delivery. There is no set-aside designation, and the contract will be awarded under standard subcontracting procedures. All submissions must be made through the DIBBS platform using the provided link, and failure to meet labeling or packaging specifications will result in disqualification.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Item Labeling & MarkingThe contract requires precise application of durable, compliant labels on medical items in accordance with Medical Marking Standard No. 1 to support military logistics operations. Each label must include essential tracking identifiers such as the National Stock Number, Part Number, Contract Line Item Number, Unique Identifier, Quantity per Unit Package, and a machine-readable barcode to ensure full traceability across the defense supply chain. The work must be executed to meet strict military standards for durability and readability under field conditions, ensuring long-term usability in austere environments. The solicitation is issued under NAICS code 323113 and is classified as a subcontract, with responses due by August 10, 2026. Performance is to be carried out at FPO, ZIP 96691, and the contracting activity is managed by the Department of Defense through the Medical Supply Chain Pharm FSA. All subcontractors must meet the technical and compliance requirements defined in MMS NO. 1 without exception, as failure to comply will result in rejection of deliverables and potential contract penalties. The deadline and location indicate a time-sensitive, mission-critical procurement aimed at maintaining operational readiness of medical inventories.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Solicitation # SPE7M1-26-T-248U

A check valve with NSN 4820-01-646-8828 and part number 509-700-112 is being procured in a quantity of 50 units under solicitation SPE7M1-26-T-248U, with a total contract value of $2,500 at $50 per unit. Delivery is required within five days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated military address at Yokosuka Naval Base, Japan, with the point of contact for inquiries being Misty Eckard. The original required delivery date is August 5, 2026, and the contract incorporates all applicable technical, quality, and packaging specifications from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-248N

A ball valve is being procured for use in the E/I hydraulic system with the NSN 4820-01-516-5621, quantity one, under purchase request 7017726989. This is a commercial off-the-shelf item, and the procurement is governed by DLA packaging requirements and technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, where revisions are controlled based on the solicitation or award date depending on acquisition size. The item is subject to the requirement for removal of government identification from non-accepted supplies. Delivery must be completed within five days of award, with the place of performance specified as Jacksonville, Florida, zip code 32226-3404. The solicitation number is SPE7M1-26-T-248N, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332911 and the procuring agency is the U.S. Department of Defense through the Maritime Supply Chain. The primary point of contact is Misty Eckard, reachable via email and phone provided.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE7M1-26-T-249C

The contract is for the procurement of one fluid filter element with NSN 4330-01-534-4559 and part number 22201388 from CLARK EQUIPMENT CO, under solicitation SPE7M1-26-T-249C. Delivery is required within ten days to Fort Sill, Oklahoma, with FOB origin terms, and no variance in quantity is permitted. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, and packaging must reflect the specified QUP. Shipment must be made by the fastest traceable means, excluding parcel post, to the designated military facility with detailed marking instructions and a unique tracking identifier. The required delivery date is July 30, 2026, and the contract references specific technical and quality standards incorporated by reference from the DLA Master List, which governs all performance and compliance criteria. All government-specific identifiers, codes, and contact details are included for internal processing and tracking purposes, and the point of contact for the acquisition is Michael Reese of the Department of Defense’s Maritime Supply Chain.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE7M1-26-T-248K

The contract is for the procurement of a transformer, power, identified by NSN 5950000818787 and part number 9100-0342 from Keysight Technologies Inc, with a quantity of 30 units, each priced at $30.00, totaling $900.00. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must meet MIL-STD-129 labeling standards, and if the item is classified as hazardous under FED-STD-313, it must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item is to be palletized according to RP001 standards, and the Unit of Issue is EA with a Quantity per Unit Pack of 001. Shipping instructions direct delivery to the Distribution Management Office at Camp Kinser, Japan, with the marked-for address identical to the shipping address. Transportation guidelines reference DLAD Proc Note C19 for general freight and C20 for first destination. The original required delivery date is July 31, 2026, and the contract is issued under solicitation SPE7M1-26-T-248K, with the NAICS code 335311 and managed by the Department of Defense’s Maritime Supply Chain. The point of contact is Ryan Snyder, with email and phone details provided for inquiries.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-248X

This contract requires the delivery of one power supply unit with NSN 6120-01-624-4579 under solicitation SPE7M1-26-T-248X, with a firm delivery deadline of 20 days from award and FOB origin terms. The item must comply with stringent environmental and material restrictions: Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by specification. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. All packaging must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization conforming to DLA’s RP001 requirements, and the Unit of Issue and Quantity per Unit Pack must match the contract exactly. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The unit is to be shipped to MCAS Futenma, Okinawa, Japan, with all shipping and transportation protocols governed by DLAD PROC Notes C19 and C20. The required delivery date is July 31, 2026, with no variance permitted in quantity.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 8 hours ago

DEADLINE

BEARING ASSEMBLY, PU

Solicitation # SPE7M1-26-T-248L

The contract is for one bearing assembly, part number 818404-000K, manufactured by Armstrong Pumps Inc, designated by NSN 4320-01-075-3027, intended for use on a booster pump in a Bell & Gossett HS-105 application. Delivery is required within 20 days from contract award, with shipment FOB destination and no tolerance for quantity variance. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for labeling, with no special marking required. Palletization follows DLA packaging requirements, and the item must be shipped to the specified FPO address for USNS SALVOR. The contract prohibits the use of ozone-depleting chemicals and strictly forbids the intentional addition of mercury or mercury-containing compounds except in narrowly defined exceptions such as functional components in batteries, fluorescent lights, or instruments approved by NAVSEA. If mercury is present in portable lamps or instruments, a second containment boundary and shockproof design are mandatory per NAVSEA 5100-003D. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract is issued under the U.S. Department of Defense via DLA, with payment and logistics managed through designated DLA vendor systems and transportation protocols as defined in DLAD PROC NOTES C19 and C20. The required delivery date is July 30, 2026, and primary point of contact is Michael Reese at DLA.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

RING, CONTROL, FLUID

Solicitation # SPE7M1-26-T-249B

The contract pertains to the procurement of a RING, CONTROL, FLUID with NSN 4330-01-470-6033 and part number 7527, manufactured by Better Engineering Manufacturing Inc, under solicitation SPE7M1-26-T-249B. A single unit is required to be delivered within 20 days FOB destination, with no tolerance for variance in quantity. Delivery must be made to USS NEW YORK LPD 21 at FPO AA 34092 using the fastest traceable means, explicitly prohibiting parcel post. Packaging must comply with MIL-STD-2073-1E and marking in accordance with MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and the unit of issue is each. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Acceptance occurs at the destination point, and the original required delivery date is July 30, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date as applicable. The contracting officer is Michael Reese, reachable at michael.reese@dla.mil, and the solicitation was posted August 4, 2026, with a response deadline of August 17, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-249A

This contract specifies the procurement of two valve bodies identified by NSN 4820-01-416-7875 and part number J41548, supplied by approved vendors including INDUSTRIAL SERVICE AND SUPPLY, INC and PULSAFEEDER INC. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. The items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements outlined in MIL-STD-129, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and any portable mercury-containing devices must include shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. The delivery destination is Fort Eustis, Virginia, with shipments required to be sent via the fastest traceable means excluding parcel post. The contract falls under DLA’s technical and quality requirements referenced from the DLA Master List, and the acquisition is subject to the version of that list in effect on the solicitation issue date. The purchase request number is 7017722221 with a total price of $2.00 per unit, and the required delivery date is August 4, 2026. The contracting office is under the Department of Defense’s Maritime Supply Chain, with contract data managed through the DIBBS system and point of contact listed as Misty Eckard.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

MEDIA CONVERTER, FIB

Solicitation # SPE7M1-26-T-249G

The contract is for the procurement of two fiber optic media converters under NSN 6030-01-568-3828, with a delivery requirement within 20 days after contract award. The solicitation number is SPE7M1-26-T-249G, issued by the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact. The offeror must comply with all DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation issue or award date depending on acquisition size. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specified functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-approved chemical reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Any alternate offeror must provide a complete data package covering both the approved and alternate part, and all government identification must be removed from non-accepted supplies. The response deadline is August 17, 2026, with performance to occur at Augusta, Maine, ZIP 04333-0032.

Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

REPAIR KIT, VALVE

Solicitation # SPE7M1-26-T-248T

The contract is for a repair kit for a valve with NSN 4820-01-622-4438 and part number 0888830, supplied by Watts Regulator Co, under solicitation SPE7M1-26-T-248T. Two kits are required to be delivered within five days to a military destination in APO AE 09865-0061, with delivery terms FOB destination and zero tolerance for quantity variance. The items must be packaged and preserved in strict compliance with MIL-STD-2073-1E Appendix D for kits and marked in accordance with MIL-STD-129, with palletization following DLA packaging requirements. The repair kit must not contain any intentionally added mercury or mercury compounds except in specific exempted devices such as functional batteries or weapon systems, and portable fluorescent lamps or instruments containing mercury must have shock-proof housing and a secondary containment boundary as per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of manufacture or processing is prohibited unless written approval is obtained from the contracting officer, and this restriction overrides all other specifications without diminishing product performance standards. Packaging data includes specific preservation methods and materials designated as ZZ, and the unit of issue is KT. Delivery is scheduled for August 3, 2026, with no flexibility on the required date. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The contract is managed under the Department of Defense’s Maritime Supply Chain, and point of contact is Misty Eckard.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

MONITOR, VOLTAGE DEV

Solicitation # SPE7M1-26-T-248P

The contract calls for the supply of one Voltage Monitor device, identified by NSN 6110-01-385-5413, under solicitation SPE7M1-26-T-248P, with a delivery requirement of 20 days after award. The item is part of a federal procurement managed by the Department of Defense’s Maritime Supply Chain, with performance designated to FPO, 96686. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The supplier must comply with DLA packaging standards, ensure proper measuring and test equipment is used, and remove any government identification from rejected items. The product must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or specified chemical reagents. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier as per NAVSEA 5100-003D. No existing data package is available, so the alternate offeror must submit complete technical data for both the primary and alternate parts. The solicitation closes on August 17, 2026, and inquiries can be directed to Michael Reese at the provided contact information.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

CONTACTOR, MAGNETIC

Solicitation # SPE7M1-26-T-248V

The contract is for one magnetic contactor with NSN 6110-01-682-7290 and part number MX52CD, supplied by Sensata Technologies, Inc., under solicitation SPE7M1-26-T-248V. Delivery is required within 10 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging is to be unitized in containment type D3 with preservative method 41 and packed under code U. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware unless part of approved exemptions such as batteries, fluorescent lamps, or weapon systems, and any portable devices containing mercury must be shock-proof with secondary containment as specified by NAVSEA 5100-003D. The delivery address is the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment governed by DLAD procedures C19 and C20. The contract is subject to DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The solicitation was posted August 4, 2026, with responses due August 17, 2026, and is classified under NAICS 335312 for electrical equipment manufacturing.

Motor and Generator Manufacturing

POSTED

about 8 hours ago

DEADLINE