Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military Marking & IUID Compliance

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract mandates the permanent application of critical identification data including part numbers, NSNs, serial numbers, OEM information, and IUID markings on military assets using Data Matrix barcodes and methods fully compliant with MIL-STD-129 Revision R. The work requires precise and durable labeling methods to ensure traceability and compliance throughout the defense supply chain, with strict adherence to government standards for asset identification and data formatting. All markings must be legible, tamper-resistant, and applied in accordance with established military specifications to support inventory management and logistics operations. The contract is classified as a subcontract under NAICS code 811411, issued by the Department of Defense through the FA8121 Afsc Pzaaa office, with a response deadline of August 12, 2026. The solicitation was posted on July 28, 2026, and performance is expected to occur within U.S. defense infrastructure, though specific location details are not provided. The requirement is focused on ensuring full IUID compliance with no set-aside provisions, indicating it is open to eligible subcontractors capable of meeting the rigorous technical and regulatory demands of military marking standards.

General Info

Apply durable IUID Data Matrix labels per MIL-STD-129R for DOD asset traceability by August 12, 2026

Agency

Department Of Defense → FA8121 Afsc PzaaaView Agency

NAICS

811411 - Home and Garden Equipment Repair and MaintenanceView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8121 Afsc Pzaaa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8121 Afsc Pzaaa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Permanent application of part numbers, NSNs, serial numbers, OEM data, and IUID markings using Data Matrix and compliant methods per MIL-STD-129 Rev R.

Similar Contracts

Same NAICS industry code

Military-Standard Marking, Labeling, and BarcodingThe contract requires compliance with military and safety standards for marking, labeling, and barcoding of military supplies, specifically applying GS1-128 and DataMatrix barcodes alongside hazard warnings in accordance with MIL-STD-129 and OSHA 29 CFR 1910.1200. All labeling must meet exacting specifications to ensure traceability, safety, and regulatory alignment across the defense supply chain. The work is tied to performance at Fort Hood, Texas, with a zip code of 76544-0000, indicating the physical location where the markings must be applied. This is a subcontract opportunity under the NAICS code 811411, which pertains to industrial and commercial machinery and equipment repair and maintenance, suggesting the work may involve labeling of equipment or components requiring repair or overhaul. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. The contracting agency is the Department of Defense through the Land Supply Chain organization, and while no set-aside type is specified, the requirement is strictly bound to federal military and occupational safety regulations, leaving no room for non-compliant labeling practices.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Shipment Marking and Labeling ServicesThe contract requires the application of durable, weather-resistant labels on military shipment and storage containers, ensuring full compliance with MIL-STD-129 for military marking and OSHA HazCom standards for hazard communication. All labeling must meet rigorous military specifications for legibility, adhesion, and environmental resilience under extreme conditions encountered during transport and long-term storage. The work is part of a subcontract under the Department of Defense’s Land Supply Chain initiative, with performance focused on supporting military logistics operations. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with the NAICS code 811411 indicating it falls under repair and maintenance services. The place of performance and point of contact details are not specified, but the work is tied to federal defense supply chain requirements, and interested parties must access the official solicitation through the DIBBS system.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Shipment Marking and Labeling Services

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Data Matrix and MIL-STD-129 Labeling ServicesThe contract pertains to the application of MIL-STD-129 compliant markings and Data Matrix barcodes on shipping containers and bare items, ensuring adherence to federal military labeling standards for traceability and logistics efficiency. This subcontract requires precise execution of labeling protocols that align with Department of Defense requirements, covering both external packaging and individual items without containers, to facilitate seamless inventory management and distribution throughout the supply chain. The work must be performed to exact specifications to meet the nuclear reactor program’s operational needs, with strict attention to barcode readability, placement accuracy, and data integrity. The solicitation was posted on July 28, 2026, with a response deadline of August 11, 2026, under NAICS code 811411, which corresponds to commercial and industrial machinery and equipment repair and maintenance. The contracting entity is the Nuclear Reactor Program within the Department of Defense, indicating the sensitive and mission-critical nature of the items being labeled. The place of performance and point of contact details are not specified, suggesting work may be conducted at multiple approved vendor facilities. Contractors must possess the technical capability to handle high-volume, high-accuracy labeling for defense-related components, and compliance with MIL-STD-129 is mandatory to ensure interoperability with existing DoD logistics systems.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Military Marking and Labeling (MIL-STD-129)This contract requires full compliance with MIL-STD-129 standards for the marking and labeling of military property, including the application of 2D Data Matrix barcodes, accurate National Stock Number (NSN) and part number identification, and appropriate hazardous material labeling where necessary. All labeling must meet exacting military specifications to ensure traceability, logistics efficiency, and safety during handling and transport. The solicitation is a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, and is reserved exclusively for small businesses as defined by the SBA. The NAICS code 811411 indicates the work involves military and defense equipment repair and maintenance services, and the contracting activity falls under the Department of Defense’s Strategic Acquisition Program Directorate. The response deadline is August 12, 2026, with the solicitation posted on July 28, 2026; all submissions must be completed through the DIBBS platform using the provided link.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Preventative Maintenance & Inspection Services for Baghouse SystemsThe contract requires the performance of quarterly inspections, preventative maintenance, and minor repairs on industrial baghouse dust collection systems located at NSWC Crane in Indiana. Scope of work includes detailed evaluation of filter media, inspection of ductwork for leaks or blockages, testing of motors and associated components, and ensuring all activities comply with OSHA and U.S. Navy safety regulations. The work must be executed with precision to maintain system efficiency, operator safety, and environmental compliance at the facility. This is a small business set-aside subcontract under NAICS code 811411, issued by the Department of Defense through NSWC Crane, with a response deadline of August 3, 2026. The contract is competitively solicited with the expectation that qualified small businesses will submit proposals. Performance must be carried out exclusively at the Crane, Indiana location, with all tasks aligned to military operational standards and industrial maintenance best practices. No point of contact is listed, and all inquiries should follow SAM.gov guidance for the posted opportunity.

POSTED

DEADLINE

Fire Extinguisher Recharging and ServicingThe contract requires the recharge and servicing of fire extinguishers following manufacturer specifications and NFPA 10 standards, encompassing agent refill and repressurization after use or during routine inspections. All work must be performed to ensure compliance with safety and operational requirements, maintaining the integrity and readiness of fire suppression equipment. The services are to be carried out at the designated place of performance in St. Cloud, Minnesota, with a zip code of 56303-2015. This is a subcontract opportunity under the NAICS code 811411, posted by the Network Contract Office 23 under the Department of Veterans Affairs, with a response deadline of August 5, 2026, at 10:00 PM. The solicitation is open for submission to qualified vendors capable of delivering certified fire extinguisher maintenance services. There is no specified set-aside type, and the contract does not include designated point of contact information. Interested parties must submit proposals through the provided SAM.gov portal before the deadline to be considered.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Vessel Maintenance and Minor Equipment Repair SupportThe contract is for onboard support to perform minor maintenance and repair of military equipment while in transit, ensuring operational readiness through timely intervention. Services include providing a functional workspace, reliable power supply, and seamless coordination with military technicians to address equipment issues during movement. The work must be conducted in compliance with military standards and timelines, with all activities aligned to maintain mission continuity and safety. This subcontract opportunity is issued under the North American Industry Classification System code 811411, targeting repair and maintenance services, and is managed by the Department of Defense through MSCHQ Norfolk. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, at 5:00 PM. The place of performance is not specified, indicating the work may occur aboard vessels or transportation assets at various locations. There is no set-aside designation, and no point of contact details are provided, requiring potential respondents to use the official SAM.gov link for full submission guidance.

POSTED

DEADLINE

Cylinder Maintenance and Recertification ServicesThe contract calls for comprehensive inspection, hydrostatic testing, and recertification of high-pressure gas cylinders to ensure compliance with established safety and regulatory standards. The work must be performed to industry-approved protocols that verify structural integrity, leak resistance, and operational reliability of cylinders used in critical applications under the jurisdiction of the Mississippi Department of Corrections. All services must be completed by qualified technicians using calibrated equipment and documented procedures that meet or exceed federal and state requirements for high-pressure vessel maintenance. The contract is structured as a subcontract with a response deadline of August 20, 2026, and was posted on July 27, 2026, under NAICS code 811411, which pertains to industrial and commercial machinery and equipment repair and maintenance. Performance location details are unspecified, but all work is expected to support state correctional facility operations. Interested parties must submit proposals prior to the deadline, and the solicitation is managed through the Mississippi Department of Finance and Administration’s contract bid portal. There is no set-aside designation, and the award will be based on technical capability, compliance history, and cost-effectiveness in delivering certified cylinder recertification services.

MS DEPT of CORRECTIONS

POSTED

DEADLINE

Military Marking and Barcoding ServicesThe contract requires the application of MIL-STD-129 compliant markings, labels, and barcodes on packaged military units, ensuring all items are properly identified with National Stock Numbers, handling codes, and storage condition indicators. This work must be performed in strict adherence to Department of Defense standards to guarantee traceability, logistics accuracy, and compliance during distribution and inventory management. The scope focuses on precise labeling and marking procedures essential for military logistics operations, with all units required to meet the technical specifications of the standard. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and is classified under NAICS code 811411. The opportunity was posted on July 27, 2026, with a response deadline of August 7, 2026. Performance is to be carried out at a specified location in Tracy, California, with a zip code of 95304-5000. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment T & IFO EQ office, and interested parties must submit proposals through the official DIBBS portal by the stated deadline.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Military Marking and UID ComplianceThe contract requires the application of unique item identification (UID) markings and 2D barcodes in strict accordance with MIL-STD-130N and MIL-STD-129 standards to ensure proper military identification and tracking of equipment and assets. Compliance with these specifications is mandatory to meet Department of Defense requirements for item accountability, logistics management, and supply chain visibility across military operations. The work must be performed at the New Cumberland facility with a zip code of 17070-5002, and all deliverables must adhere to the technical and procedural mandates outlined in the referenced military standards. This subcontract is open for response until August 7, 2026, with the solicitation posted on July 27, 2026. The North American Industry Classification System code 811411 indicates the work falls under repair and maintenance services, suggesting the task involves marking existing or newly refurbished items rather than manufacturing. The contracting activity is managed by the DDSP New Cumberland Facility under the Department of Defense, and the official reference for bidding and submission is listed through the DIBBS platform. All parties must ensure full compliance with the standards and deliverables to qualify for award and successful performance under this agreement.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Military Marking and Labeling ServicesThe contract requires standardized marking and labeling services in full compliance with MIL-STD-129, ensuring all military items are properly identified with unit-specific information, UCC-128 and GS1 DataBar barcodes, and applicable hazard warnings. All markings must be durable, legible, and meet exacting government specifications for tracking, inventory, and safety compliance across the supply chain. The work involves precise application of labels and symbols to ensure seamless integration with DoD logistics and inventory systems. This is a subcontract opportunity under NAICS code 811411, issued by the Department of Defense through the Construction & Equipment T & IFO EQ office, with performance required at the specified location in New Cumberland, Pennsylvania, zip code 17070-5002. Bidders must submit responses by the deadline of August 7, 2026, and the solicitation can be accessed via the DIBBS platform. No set-aside type is designated, and the contract is open to qualified subcontractors capable of meeting the rigorous technical and regulatory standards for military labeling.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8121 Afsc Pzaaa

Same awarding agency

Domestic Freight & FOB Origin ShippingThe contract is for the domestic transportation of packaged units from the contractor’s facility to the DLA Distribution Depot at Tinker AFB in Oklahoma under F.O.B. Origin terms, meaning the buyer assumes responsibility for the goods once they leave the contractor’s location. The transportation must be conducted in compliance with all applicable shipping regulations, and WAWF shipping verification is required to ensure accurate documentation and electronic confirmation of shipment milestones. This subcontract is classified under NAICS code 484220, which covers truck transportation for less than a full truckload, indicating the nature of the freight services to be performed. The opportunity was posted on July 28, 2026, with a response deadline of August 12, 2026, at 5:00 p.m. The contracting office is under the Department of Defense, specifically the FA8121 Afsc Pzaaa, and the work will be performed entirely within the United States. While specific details regarding shipment volume, frequency, or packaging standards are not provided, the requirement for WAWF verification implies strict adherence to federal logistics protocols. The contract is open to eligible subcontractors without a specified set-aside classification, and all prospective bidders must ensure compliance with federal shipping and documentation standards prior to submission.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Grade Packaging & PreservationThe contract mandates the packaging and preservation of finished military units in strict compliance with MIL-STD-2073-1 Revision E, ensuring long-term protection against environmental degradation during storage and transport. Key preservation requirements include MIL-B specifications for corrosion inhibition, ISPM 15-compliant thermal treatment of all wood packaging materials to prevent invasive species, and accurate, durable marking consistent with military standards for identification and logistics tracking. All work must adhere to the technical and procedural rigor expected for Department of Defense equipment, with no deviations permitted in materials, methods, or documentation. This subcontract, posted on July 28, 2026, under NAICS code 561910 for other support activities for waste management, requires proposals to be submitted by August 12, 2026, at 5:00 PM. The contracting activity is listed as FA8121 Afsc Pzaaa, operating under the Department of Defense, though specific location details and point of contact information are not provided. The opportunity is open without set-aside classification and must be addressed through the official SAM.gov portal linked in the solicitation.

Packaging and Labeling Services

POSTED

DEADLINE

Aerospace Component Testing & VerificationThe contract pertains to the functional and environmental testing of aerospace components in accordance with Technical Order 2J-F100-24, requiring rigorous validation of dimensional precision, operational performance under simulated engine conditions, and seamless integration with fuel control systems. Testing must ensure compliance with stringent aerospace standards, verifying that components maintain integrity and functionality across a range of operational environments relevant to propulsion systems. All work is subject to verification protocols aligned with military technical specifications and must be completed to satisfy certification requirements for deployment. This subcontract, posted on July 28, 2026, with a response deadline of August 12, 2026, falls under NAICS code 541380 for other scientific and technical consulting services and is issued by the Department of Defense through the FA8121 Afsc Pzaaa office. The place of performance and point of contact details are not specified, but the work is expected to be executed in alignment with federal defense contracting guidelines. Interested parties must submit proposals prior to the deadline to be considered for award, with no set-aside provisions indicated for small businesses or other categories. The opportunity is accessible via the SAM.gov platform for full submission requirements and documentation.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Aerospace Casting (Aluminum)The contract entails the precision manufacturing of a control exhaust nozzle using aluminum casting methods, with full responsibility for mold design, casting, finishing, and dimensional verification to meet the specifications outlined in Source Control Drawing 4083931. All work must adhere to stringent aerospace quality standards, ensuring the final component meets exacting functional and dimensional tolerances required for critical aerospace applications. The scope covers the entire production lifecycle from initial tooling through final inspection, with no room for deviation from the approved technical documentation. This is a subcontract issued under the NAICS code 332112 for aluminum foundry operations, sponsored by the Department of Defense through the FA8121 Afsc Pzaaa office. The solicitation was posted on July 28, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM, leaving a limited window for qualified vendors to submit proposals. Performance location details are unspecified, and no set-aside designation or point of contact information is provided, suggesting that eligible contractors must independently verify all operational and compliance requirements prior to bidding. All work must be completed in accordance with Defense Department procurement protocols and aerospace industry best practices.

Nonferrous Forging

POSTED

DEADLINE

F100 - Control Exhaust Nozzle, NSN 2995014502816NZ, P/N 4083931This contract is a spares buy for the F100 Control Exhaust Nozzle with National Stock Number 2995014502816NZ and Part Number 4083931, aimed at procuring essential replacement components for military aerospace systems. The solicitation, identified by number FA812126R0018, was posted on July 28, 2026, with a response deadline of August 12, 2026, at 5:00 PM Eastern Time. There is no set-aside designation applied, meaning the opportunity is open to all qualified contractors without restriction based on business size or other categories. The NAICS code 336412 categorizes this procurement under Aerospace Product and Parts Manufacturing, aligning with the technical nature of the component. The contracting office is located at Tinker Air Force Base in Oklahoma, under the Department of Defense, specifically the FA8121 AFSC PZAAA organization. Primary point of contact for inquiries is Treva Billinger, reachable via email at TREVA.BILLINGER@US.AF.MIL or phone at 405-734-0260. Performance of the contract is expected to be fulfilled at an unspecified location, and all bids must be submitted through the provided SAM.gov portal.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

F100 Module Kit, Servo VA, NSN 2915012240747NZ, P/N 351009-ISSAThe contract solicitation FA8121-26-R-0017 seeks spares for the F100 Module Kit, Servo VA with NSN 2915012240747 and part number 351009-ISSA, under a Firm Fixed Price (FFP) arrangement. The requirement calls for the manufacture and delivery of 19 to 57 units with estimated delivery of 36 units under CLIN 0001, plus additional fixed quantities of 2 and 1 units under CLINs 0002 and 0003, respectively. Separate line items demand submission of a First Article Test Plan and First Article Test Report as critical deliverables, ensuring compliance with technical and quality standards. All deliveries must be made F.O.B. ORIGIN, with title and risk of loss transferring at the contractor’s shipping location. The primary point of performance is Tinker AFB, OK, with specific delivery destinations identified in the schedule. Packaging must conform to MIL-STD-2073-1E and marking to MIL-STD-129R, requiring barcoding per MIL-STD-130 using Data Matrix ECC200 symbology compliant with ISO/IEC 15434. Wood packaging must meet ISPM No. 15 standards. Inspection and acceptance occur at origin, governed by clauses 52.246-2 and 52.246-11, with adherence to Pratt & Whitney Visual Inspection Standards and LPR-QPR-018 for nondestructive testing. All work must comply with FAR 46.401(b), 46.503, 47.303-1(c), and DI-NDTI-80089B, and include metallurgical and mechanical test data, photographic records, and remnants from destructive testing. Payment is processed exclusively through WAWF, with invoicing types including invoices, cost vouchers, and progress payment requests. The contract includes mandatory clauses for prompt payment discounts, stop-work orders, inspection of supplies, and commercial product warranties with Alternate I applied. Shipping and marking requirements are strictly enforced per federal standards, with no flexibility for noncompliant packaging or labeling. Suppliers must submit proposals by the deadline of August 12, 2026, using the designated government portal or hand delivery to Tinker A

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Environmental Monitoring and Erosion ControlThe contract titled Environmental Monitoring and Erosion Control is a subcontract under a Partial Small Business Set-Aside, designated for small businesses as defined under FAR 19.5, and falls under the NAICS code 561730 for waste collection and treatment services. It encompasses the installation and ongoing maintenance of erosion control measures such as silt fencing, hydroseeding, and stormwater monitoring systems to ensure environmental compliance and site stabilization. The work is solicited by the Department of Defense through its FA8121 Afsc Pzaaa office, though specific location details for performance are not provided. The opportunity was posted on July 24, 2026, and interested parties can access additional information via the provided SAM.gov link. The scope of work requires adherence to environmental standards and ongoing monitoring to prevent sediment runoff and protect surrounding ecosystems during construction or land disturbance activities.

Landscaping Services

POSTED

DEADLINE

Traffic Control and Flagging ServicesThe contract involves the implementation and management of temporary traffic control zones compliant with Caltrans and MUTCD standards, ensuring safe and efficient movement of vehicles and workers during roadway operations. Services include the deployment and maintenance of traffic control devices, flagging operations, and adherence to all applicable safety protocols, performed in alignment with federal and state transportation guidelines. The work is subcontracted under a partial small business set-aside, designated for small business participation as defined by FAR 19.5, with the NAICS code 561990 indicating non-specialized waste management and other services. The contracting agency is the Department of Defense under the FA8121 Afsc Pzaaa office, with performance location unspecified but presumed to support defense-related infrastructure projects. The solicitation was posted on July 24, 2026, and interested parties can access further details through the provided SAM.gov link.

All Other Support Services

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract involves the fabrication and installation of steel support structures designed for overhead signage and lighting gantries under a partial small business set-aside classification. It is classified under NAICS code 332312, which corresponds to structural metal fabrication, and is issued as a subcontract within the Department of Defense framework under the FA8121 Afsc Pzaaa agency. The opportunity was posted on July 24, 2026, and emphasizes compliance with small business participation requirements, ensuring a portion of the work is performed by certified small businesses. The place of performance is not specifically detailed, indicating that work may occur at multiple locations tied to federal infrastructure projects. All fabrication and erection activities must meet stringent structural and safety standards appropriate for overhead applications, with expectations for precision engineering, quality control, and timely delivery to support critical transportation or facility lighting and signage systems.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Paving and Asphalt ResurfacingThe contract involves the removal of existing pavement and the resurfacing of the area with hot mix asphalt, adhering to specified thickness and smoothness standards to ensure long-term durability and safety. This work is classified as a subcontract under the North American Industry Classification System code 237310 and is designated as a Partial Small Business Set-Aside, meaning a portion of the work is reserved for small business concerns as defined by FAR 19.5. The solicitation is managed by the Department of Defense under the agency name FA8121 Afsc Pzaaa, with the posting date set for July 24, 2026, indicating it is a future opportunity. The place of performance and specific location details have not been provided, and no point of contact information is listed. Interested parties can access further details through the provided SAM.gov link to the opportunity page.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Electrical Installation for Highway Lighting SystemThe contract is for the installation of electrical systems along highway segments, specifically encompassing conduit, wiring, and lighting fixtures to support a highway lighting system. It is classified as a subcontract under a Partial Small Business Set-Aside, aimed at providing opportunities for small businesses as defined by FAR 19.5, with the NAICS code 238210 specifying electrical power and communication line installation. The work is being procured by the Department of Defense under the office FA8121 Afsc Pzaaa, though specific performance locations, agency addresses, and points of contact are not provided in the data. The solicitation was posted on July 24, 2026, and details can be accessed through the provided SAM.gov link, where further technical specifications and requirements will be available to interested parties.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Technical Data and Engineering Drawings DevelopmentThe contract seeks the development or sourcing of engineering drawings and technical data for a lever component, with the possibility of reverse engineering being required due to the absence of an established Engineering Data List. This effort is critical to recreating or documenting the necessary specifications to support production or maintenance, as no prior technical documentation is provided. The work scope emphasizes precision and compliance with engineering standards to ensure functional equivalence and interoperability of the component. This subcontract is issued under the NAICS code 541715 for research and development in physical, engineering, and life sciences and is administered by the Department of Defense through the FA8121 Afsc Pzaaa office. The solicitation was posted on July 24, 2026, with a firm deadline for responses set for August 10, 2026, at 8:00 PM. While specific performance location and point of contact details are not provided, the work is expected to align with federal defense requirements and deliverables must meet the technical rigor expected by the U.S. Air Force and broader DoD procurement frameworks.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE