Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NIPPLE, HOSE

Active
SPE7M0-26-T-030UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two NIPPLE, HOSE items with NSN 4730-99-613-4007 and part number 816/90041 from J.C. BAMFORD EXCAVATORS LIMITED, under solicitation SPE7M0-26-T-030U. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity—exactly two units must be supplied. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization as specified. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless already authorized by specification. No shelf life requirement applies to this item. The delivery location is W8002S, 0189 CS BN CO A COMPOSITE, AWCF SSA, 2530 TAYLOR STREET, BUILDING 2530, FORT BRAGG, NC 28310, with the same markfor address. Shipment must be sent via fast, traceable means and parcel post is prohibited. Inspection and acceptance occur at the destination. The Unit of Issue is EA, with a unit price of $2.00 per item, totaling $4.00. The required delivery date is August 4, 2026, and the contract incorporates specific government use codes and identifiers for tracking. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, under NAICS code 326122 and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office.

General Info

Procure two NIPPLE, HOSE items, NSN 4730-99-613-4007, deliver by August 4, 2026, FOB origin, comply with DLA and MIL-STD-129.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

326122 - Plastics Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

2530 TAYLOR STREET BLDG NUMBER 2530, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-030U.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
NIPPLE,HOSE
NIPPLE,HOSE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
J.C. BAMFORD EXCAVATORS LIMITED K7599 P/N 816/90041
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017722248 0001 EA 2.000
NSN/MATERIAL:4730996134007
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE7M0-26-T-030U
SECTION B
PR: 7017722248 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
MARKFOR
W8002S
0189 CS BN CO A COMPOSITE
AWCF SSA
2530 TAYLOR STREET BLDG NUMBER 2530
FORT BRAGG NC 28310
US
M/F: (TCN) W8002S62110532
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE7M0-26-T-030U NSN/Part Number: 4730-99-613-4007 Quantity: 2 EA Purchase Request: 7017722248QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326122
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M0-26-T-029V
The contract is for the procurement of a metallic tube with NSN 4710-01-682-4309 and purchase request number 7017719849, requiring a quantity of six feet delivered within five days. Delivery is FOB origin with a quantity variance of plus 10 percent and minus zero percent, and inspection and acceptance occur at the destination. The product must comply with SAE AMS5647 specifications and is subject to DLA’s packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking codes without special identification. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be approved unless already authorized by the specification. Packaging must be palletized per DLA guidelines, and shipments must use traceable freight methods—parcel post is expressly forbidden. The delivery destination is Little Rock Air Force Base, Arkansas, and the contract mandates adherence to all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The contract is issued under solicitation SPE7M0-26-T-029V with a required delivery date of August 3, 2026, and a response deadline of August 17, 2026, under the NAICS code 326122 for the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L1-26-Q-1439
This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-675-9509 and part number P5574-2 from TRANSDIGM INC, with a required quantity of 69 units to be delivered within 246 days of award. The item must strictly conform to the source-controlled drawing numbered 53711-7124755 Revision C dated 04/09/2016, and only suppliers listed on that drawing are currently approved, though additional qualified sources may exist without being reflected on the drawing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Mercury or mercury-containing compounds are prohibited unless used in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, in which case portable devices must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes. Items must be palletized according to DLA standards and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no variance permitted in quantity, and the contract incorporates all applicable DLA procedural notes for transportation and logistics.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 9 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M0-26-T-031A
This contract is for the procurement of 20 units of a hose clamp, identified by NSN 4730-01-562-6063 and supplier part number 5388K24 from McMaster-Carr Supply Co, classified as a commercial off-the-shelf item. Delivery is required within five days of award, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129 standards, with DLA’s Master List of Technical and Quality Requirements taking precedence. The unit of issue is each, with a total price of $20.00 per unit, and the full contract is governed by DLA packaging requirements under RP001. The item must be palletized as specified, shipped via the fastest traceable method excluding parcel post, and delivered to the designated military logistics address in Hagerstown, Maryland. Shipping and marking must reference the provided DLA identifiers and contact details, including the military freight identifier W90HYJ and the government-controlled tracking code W90HYJ62110020. The required delivery date is August 4, 2026, and this solicitation is issued under contract SPE7M0-26-T-031A, with procurement under the NAICS code 326122 for the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-030E
This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-482-5087 and part number 3929466, supplied by Cummins Inc. under solicitation SPE7M0-26-T-030E. The requirement calls for a single unit to be delivered within five days of contract award, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Packaging, marking, and labeling must adhere to MIL-STD-129, and palletization must follow DLA packaging standards RP001. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The delivery must be shipped via traceable means, excluding parcel post, to the specified military address at Fort Lee, Virginia, and must be marked with the designated government control identifiers. The shipment is classified as RDD with NMCS designation and must be sent using a fast, trackable transportation service. The contract includes specific government-only codes for internal tracking and disposition, and the original required delivery date is August 4, 2026. The unit of issue is each, and while the contract lists a purchase request number, the quoted quantity is one unit with a corresponding price of one dollar. The supplier must ensure all technical and quality specifications from the DLA Master List are met, and the solicitation response is due by August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M0-26-T-029N
The contract is for the procurement of four straight adapters, part number 4730-01-718-5915, under solicitation SPE7M0-26-T-029N, with a required delivery within five days of award. The item is subject to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, and compliance is mandatory. The supplier must adhere to DLA packaging standards and is prohibited from using any Class I ozone-depleting chemicals in manufacturing or packaging, regardless of existing specification provisions; any substitute chemicals require prior approval unless explicitly authorized. The technical data associated with this item is subject to export control under ITAR or EAR, and disclosure to foreign persons—even within the U.S.—is restricted. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this data. The contract falls under NAICS code 326122 and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office, with performance location in Portsmouth, NH. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and primary point of contact is Kathleen Hipes at the provided DLA email and phone number.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-029B
This contract specifies the procurement of a single metal tube assembly with NSN 4710-01-680-7501 and part number 938456, supplied by DRS Sustainment Systems, Inc. The requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951 for packaging. All items must be packaged and marked in compliance with MIL-STD-129, palletized according to DLA Packaging Requirements, and delivered FOB origin within five days of contract award. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by specification. The sole delivery quantity is one unit, with zero variance allowed, and inspection and acceptance occur at the destination. The item must be shipped using the fastest traceable means, excluding parcel post, to the specified logistics warehouse at Fort Hood, Texas, with the designated military shipping identifier and reference codes. The contract is issued under solicitation number SPE7M0-26-T-029B with an original required delivery date of August 3, 2026, and a posted date of August 4, 2026. Performance is tied to a DoD unit of issue, and the corresponding ANSI X12 unit must be referenced through the official DLA link. All packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack. The project is identified under GB4 TP 1 with a technical control number W507HD62102016 and RDD 266. Government-use-only fields indicate the contract’s administrative and distribution codes. The supplier is required to adhere to all DLA directives, procurement standards, and environmental prohibitions, with full compliance verified upon arrival at the designated facility.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-030P
The contract pertains to a single unit of a metal tube assembly with NSN 4710-01-482-5086 and part number 3929463, sourced from CUMMINS INC, under solicitation SPE7M0-26-T-030P. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Acceptance and inspection occur at the destination, and all supplies must comply strictly with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials must be pre-approved unless already authorized by the specification. Packaging must conform to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA Packaging Requirements, and all items must be shipped via traceable freight methods excluding parcel post. The delivery destination is Fort Lee, Virginia, with specific marking and shipping codes including W26ADX and W6YC USALRCTR FT LEE. The contract prohibits government identification removal from non-accepted items and mandates adherence to authorized unit-of-issue standards as defined by DoD guidelines. The original required delivery date is August 4, 2026, with the solicitation response deadline set for August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M0-26-T-029F
The contract pertains to the procurement of one elbow, tube with NSN 4730-01-656-0532 and purchase request number 7017727135, under solicitation SPE7M0-26-T-029F, with a required delivery in five days FOB destination. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must comply with MIL-STD-129. The quantity is fixed at one unit with no variance allowed, and inspection and acceptance occur at the destination. Packaging and palletization must adhere to DLA’s RP001 packaging requirements, with the unit of issue and quantity per unit pack specified in the contract. The delivery destination is FPO AE 09645-0010 for Explosive Ordnance Disposal Mobile Unit Eight, and the shipping point is Naval Station Rota, Spain. Transportation protocols follow DLAD Proc Note C19 and C20, and the item is subject to government-only use identifiers. The original required delivery date is August 5, 2026, and the contract is associated with NAICS code 326122 under the Department of Defense’s Maritime Supply Chain ESOc Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-029Z
This contract specifies the procurement of a metal tube assembly with NSN 4710014825094 and part number 3932495, issued under solicitation SPE7M0-26-T-029Z by the Department of Defense through the Maritime Supply Chain ESoC Buys office. Two line items are listed, each for one unit, with identical technical and delivery requirements but different delivery destinations: one to Fort Lee, Virginia, and another to Eglin Air Force Base, Florida. Delivery must occur within five days of shipment, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance occurring at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. Palletization must meet DLA standards, and shipment must be made via traceable freight methods, explicitly prohibiting parcel post. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitute chemicals require prior approval unless already authorized by specification. Packaging must be properly marked with government identifiers as directed, and all shipments must reference the assigned TCN and project code TP 1. The original required delivery dates are August 4 and 5, 2026, respectively, and the contract enforces strict adherence to DLA’s authorized unit of issue and labeling protocols.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-299V
The contract pertains to the procurement of one metallic tube with NSN 4710-01-643-7969 and part number 101997-16-4, supplied by TESTEK LLC under solicitation SPE7M4-26-T-299V. Delivery is required within 20 days FOB destination to the USS GEORGE H W BUSH CVN 77 in Norfolk, Virginia, with no variance allowed in quantity. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951, and packaging must conform to MIL-STD-129 and RP001, ensuring palletization and labeling meet DLA standards. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, lighting, sensors, or naval equipment per NAVSEA 5100-003D, and all portable devices containing mercury must include a secondary containment. Commercial off-the-shelf items are acceptable provided sufficient catalog data is available for evaluation. Class I ozone-depleting chemicals are banned from all delivered items, and any substitutes require prior approval unless explicitly authorized. The unit of issue is each, priced at one dollar, with the required delivery date set for July 31, 2026. Transportation and shipping instructions reference DLAD PROC NOTES C19 and C20, and the item must be identified with the vendor shipment marker V23170 and RDD 777.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
BUSHING, PIPE
Solicitation # SPE7M3-26-T-7829
The contract is for one unit of a bushing, pipe with NSN 4730-31-017-8951, issued under solicitation SPE7M3-26-T-7829 by the Department of Defense’s Fluid Handling Division. Delivery is required within 20 days of contract award to Camp Lejeune, North Carolina, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering strictly to DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA Packaging Requirements. Use of Class I ozone-depleting chemicals is prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specifications. The item must be shipped by traceable means, prohibiting parcel post, and must be addressed to the designated military freight location. The required delivery date is July 30, 2026, and the contract references specific technical and quality standards incorporated by R and I numbers from the DLA Master List. The point of contact is William Cain, and the contract is open for response until August 17, 2026.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-030F
This contract is for the procurement of a single unit of a metal tube assembly with NSN 4710-01-482-5088 and part number 3929464 supplied by CUMMINS INC, under solicitation SPE7M0-26-T-030F. The delivery is required within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination location, Fort Lee, Virginia, where the item must be delivered to the specified logistics center. All packaging must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization following DLA’s packaging requirements, and the use of ozone-depleting chemicals is strictly prohibited in manufacturing or processing. The contract incorporates technical and quality requirements from the DLA Master List, which takes precedence over any other standards. The shipment must be sent via traceable freight methods, not parcel post, and must be marked and labeled according to the provided routing and identification data. The original required delivery date is August 4, 2026, and the item is intended for government use under a federal acquisition program with specific logistics and compliance mandates.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 334418
New
DIBBS
FLASHER, THERMAL
Solicitation # SPE7M0-26-T-028Q
The contract pertains to the procurement of one unit of a thermal flasher with NSN 5945-01-516-9383 and purchase request number 7017726988, under solicitation SPE7M0-26-T-028Q. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 and include the special code ZZ for additional requirements, particularly the mandatory application of lead content markings per IPC/JEDEC J-STD-609 on each individual unit package, with placement governed by the standard’s section 6.2. Copies of the standard are to be obtained from IPC or JEDEC. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated government address at Blount Island, Jacksonville, Florida. The required delivery date is August 5, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the Maritime Supply Chain ESOC Buys office, with primary contact Laurie Wassmuth.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7M0-26-T-029R
The contract is for the procurement of two cable assemblies under solicitation SPE7M0-26-T-029R, with a total small business set-aside and a NAICS code of 332999. The delivery requirement is strictly five days after delivery order, and the solicitation closed on August 17, 2026, issued on August 4, 2026. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on the acquisition size. The item involves covered defense information and is subject to export control under ITAR or EAR, meaning any disclosure to foreign persons, including within the U.S., requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs this data, and only contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export training, and DLA approval may access the technical data. The place of performance is Tobyhanna, Pennsylvania, and the point of contact is Gerard Quinn of the Department of Defense’s Maritime Supply Chain ESOC Buys office.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M0-26-T-028M
The contract pertains to a quick-disconnect coupling half, identified by NSN 4730-01-516-8346, with a quantity of one unit. It is classified as a commercial off-the-shelf item, and adequate catalog data is available to the procurement agency for evaluating alternatives. The item must comply with the DLA Packaging Requirements for Procurement and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The procurement is subject to the removal of government identification from non-accepted supplies. The solicitation number is SPE7M0-26-T-028M, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332996, and the contracting agency is the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance located in Jacksonville, Florida, 32226-3404. Delivery is required within five days after delivery order issuance.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M0-26-T-030Q
This contract specifies the procurement of a nonmetallic hose assembly with the NSN 4720-01-710-6978 and part number 12647529-2, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The item is classified as a TYPE I (CODE W) with a non-extendable shelf life of 120 months, and supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes #C03 from August 2016. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life identification, and palletization must meet DLA packaging requirements. The item is subject to full and open competition with no quantity variance allowed, and delivery is required within five days FOB origin to Fort Bliss, Texas, via traceable freight methods excluding parcel post. The contract is issued under solicitation SPE7M0-26-T-030Q with a required delivery date of August 4, 2026, and a response deadline of August 17, 2026. The unit of issue is each (EA), with a single unit priced at $1.00, and the point of contact is Abaigael Masterson of the Department of Defense’s Maritime Supply Chain ESOC. All technical data packages reference specific drawings dated between 2015 and 2026, and the item must be shipped via government-designated logistics channels using the provided freight and marking instructions. Government-use fields include internal identifiers such as IPD, DIC, and ADV codes, and the procurement falls under NAICS code 326220 for rubber product manufacturing.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SHIELDING GASKET, EL
Solicitation # SPE7M0-26-T-030K
The contract specifies the procurement of one shielding gasket, model 0212688-1 from Argon St, Inc., identified by NSN 5999015894105, under solicitation SPE7M0-26-T-030K. Delivery is required within five days of order placement, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking codes applied. Packaging must be palletized according to DLA standards and conform to hazardous material shipping protocols, explicitly excluding mercury or mercury-containing compounds unless exempted for specific functional uses such as batteries, instruments, or weapon systems, and portable fluorescent lamps must include a secondary containment. The shipment is destined for the U.S. Naval Base in Sasebo, Japan, with a parcel post address and detailed shipping instructions, and includes a required delivery date of August 4, 2026. The contract references the DLA Master List of Technical and Quality Requirements, incorporating all listed R and I numbered specifications, and mandates adherence to DoD unit of issue standards. The point of contact for the solicitation is Gerard Quinn of the Department of Defense, with procurement managed through the Maritime Supply Chain E-SoC Buy unit.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-029H
The contract specifies the procurement of 40 units of a commercial off the shelf (COTS) electrical plug connector identified by part number HBL400MGN from HUBBELL INC WIRING DEVICE DIV and NSN 5935016743784, with a unit price of $40.00 and a total value of $1,600.00. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List requirements, MIL-STD-129 labeling, and either ASTM D3951 for non-hazardous items or TQ requirement IP025 if hazardous under FED-STD-313. Palletization must follow RP001 packaging guidelines. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated receiving facility in Tobyhanna, Pennsylvania, with freight addressed to ASARS 1C BAY 6. The required delivery date is August 3, 2026, and the contract reference is SPE7M0-26-T-029H, governed by DLA technical and quality standards that supersede all other specifications. The point of contact is Gerard Quinn, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details