Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Packaging & Preservation Services

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive packaging and preservation services for steel bars in strict accordance with MIL-STD-2073-1E and ASTM A700 standards, ensuring that all materials are protected against corrosion, damage, and environmental degradation during storage and transit. Preservation codes Z and ZZ must be applied to meet specified protective requirements, and all work must comply with DLA RP001 standards to guarantee operational readiness and uniformity across Defense Logistics Agency shipments. The scope encompasses end-to-end packaging processes including materials handling, labeling, crating, and documentation to ensure full traceability and compliance. This subcontract, issued by the Department of Defense under the agency name DEPOT OKLAHOMA, is tied to a performance location at Tinker AFB with a ZIP code of 73145-8000 and falls under the NAICS code 561910 for other support activities. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026. All proposers must be prepared to demonstrate technical capability, quality assurance practices, and adherence to military packaging specifications, with no set-aside provisions indicated. The contract is accessible via the DIBBS portal on the provided URL for detailed submission instructions and supplementary requirements.

General Info

Pack steel bars per MIL-STD-2073-1E and ASTM A700 with preservation codes Z and ZZ for DLA at Tinker AFB.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DEPOT OKLAHOMA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging of steel bars per MIL-STD-2073-1E and ASTM A700, including preservation codes Z/ZZ and compliance with DLA RP001 standards to ensure shipment protection.

Similar Contracts

Same NAICS industry code

Packaging, Marking, and Labeling ServicesThe contract requires the provision of military-compliant packaging, marking, and labeling services for containers in accordance with ASTM D3951 and MIL-STD-129 standards, ensuring all materials meet stringent defense logistics requirements. The work must be performed at the specified place of performance in Tracy, California, with ZIP code 95304-5000, and the services are classified as a subcontract under NAICS code 561910, which pertains to other support activities for manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense under the organization name Construction & Equipment Containers. All submissions must adhere to the technical specifications outlined in the referenced military and industry standards to ensure compatibility with defense supply chain operations.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 21 hours ago

DEADLINE

Military-Compliant Packaging and MarkingThe contract requires the packaging, labeling, and barcoding of hydraulic jacks in strict compliance with Department of Defense and Military Standards, including adherence to hazardous materials regulations where applicable. All work must ensure full traceability, durability, and uniformity of markings to meet military logistics and inventory requirements, with special attention to barcoding systems that align with DLA’s specifications for field deployment and supply chain management. The performance location is specified as New Cumberland, Pennsylvania, with zip code 17070-5002, indicating the physical site where the packaging and marking activities must be conducted. This is a subcontract designated as a Total Small Business Set-Aside under the SBA program, meaning only small businesses can compete, as defined by the North American Industry Classification System code 561910, which covers support activities for waste management and remediation services, indicating a classification that may encompass specialized logistics or packaging services. The solicitation was posted on August 5, 2026, with a required response deadline of August 17, 2026, and it is hosted on the DIBBS platform. The contracting agency is listed as the Department of Defense under the organization Construction & Equipment Manu & Con, reflecting the military’s intent to secure compliant packaging services for essential equipment.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

Sustainable & Environmentally Compliant Packaging SupplyThe contract requires the supply of military-compliant packaging materials that adhere to MIL-STD-2073-1E, DLA RP001, and FAR 23.223 standards, ensuring environmental sustainability and regulatory alignment with Department of Defense protocols. All materials must be ozone-safe and include proper barcoding to meet traceability and logistics requirements, supporting efficient handling and inventory control across military supply chains. The packaging solutions must be designed for durability, functionality, and minimal environmental impact, reflecting a strong emphasis on eco-conscious procurement practices. This is a subcontract under a Women-Owned Small Business Set-Aside, with the NAICS code 561910 indicating it pertains to other support activities for waste management and remediation services, aligned with packaging and logistics support functions. The solicitation was posted on August 5, 2026, and responses are due by August 20, 2026. The procuring entity is the Strategic Acq Program Directorate within the Department of Defense, and the place of performance and point of contact details are not specified. Interested parties must submit proposals through the DIBBS portal using the reference number SPE7LX26U9306.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

Military Packaging & Labeling Services

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

Packaging, Marking, and SDS ComplianceThe contract requires precise packaging and labeling of respirator units in full compliance with DLA RP001 standards, ensuring that each unit is properly prepared for safe transport and storage. Alongside physical preparation, the contractor must generate and submit accurate Safety Data Sheets for any hazardous materials included in or associated with the respirator units, adhering strictly to federal transport and handling regulations. This work is essential to maintain regulatory compliance and operational readiness for defense-related logistics. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA in accordance with FAR 19.5, meaning only small businesses are eligible to respond. It falls under NAICS code 561910, which classifies it within other support activities for air transportation, though the actual scope centers on packaging and compliance services. The solicitation was posted on August 5, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense under the Construction & Equipment MRO SVC I organization. All work must be performed in accordance with government specifications, and the primary focus remains on quality, compliance, and timely documentation.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract seeks specialized services for packaging hazardous materials, applying hazard warning labels, and preparing accurate Safety Data Sheets in full compliance with federal and military regulations. All work must adhere to stringent standards governing the safe handling, transportation, and documentation of dangerous goods, ensuring alignment with Department of Defense requirements and relevant hazardous materials transportation codes. The services are critical to supporting secure and compliant logistics operations for defense-related shipments. This is a small business set-aside subcontract under NAICS code 561910, exclusively available to small businesses as defined by the SBA. The opportunity was posted on August 5, 2026, with proposals due by August 17, 2026, and performance is expected to be centered at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment MRO SVC I office, and the successful vendor will be responsible for delivering all packaging, labeling, and SDS documentation services on time and to exacting quality standards to support military readiness and safety protocols.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, labeling, and palletization services for cable reels in strict compliance with DLA, MIL-STD-129, ASTM D3951, and DLA RP001 standards, ensuring all materials meet military-grade specification for handling, storage, and transportation. The work must be performed with precision to meet regulatory requirements for unit identification, barcoding, labeling, pallet configuration, and secure containment to prevent damage during transit and long-term storage. The solicitation, issued under NAICS code 561910 for other support services, is structured as a subcontract with a response deadline of August 17, 2026, and a posting date of August 5, 2026. Performance is designated to occur at Barstow, California, with a ZIP code of 92311-5014, and is managed under the Department of Defense’s Construction & Equipment Manufacture and Construction organization. All work must adhere to the technical and procedural mandates of the referenced standards without deviation, and timely submission of bids is critical to participate in this procurement opportunity.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

Military Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, preservation, and labeling of gaskets in accordance with military specifications, ensuring readiness for Department of Defense logistics and storage. All gaskets must be sealed in waterproof bags and preserved using Preservation Method 33, designed to protect against corrosion and environmental degradation during extended storage and transit. Labeling must strictly adhere to MIL-STD-129 requirements, incorporating 2D barcodes and accurate National Stock Number and Contract Line Item Number data to enable seamless tracking and inventory management across military supply chains. Performance of this subcontract is designated for Fort Leonard Wood, Missouri, with a response deadline of August 17, 2026, and a posting date of August 5, 2026. The North American Industry Classification System code 561910 indicates the work falls under other support activities for agriculture and mining, highlighting the specialized nature of the packaging and preservation services required. The contract is issued under the Land Supply Chain division of the Department of Defense, emphasizing its role in supporting critical defense logistics infrastructure and ensuring that gaskets meet stringent readiness standards for military deployment.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Packaging, Labeling, and Marking ComplianceThis contract requires full compliance with U.S. military packaging, labeling, and barcoding standards including MIL-STD-2073-1E for protective packaging, MIL-STD-129 for uniform labeling and barcoding of military shipments, and DLA RP001 for defense logistics agency requirements. All items must be properly marked with standardized barcodes and hazard labels where applicable, ensuring safe handling and identification of hazardous materials in accordance with Department of Defense regulations. The work must be performed to support military supply chain operations with exacting precision in documentation, marking, and packaging integrity. The solicitation is classified as a subcontract under NAICS code 561910 for other support services and was posted on August 5, 2026, with a response deadline of August 13, 2026. Performance is designated for Tinker Air Force Base, Oklahoma, 73145-8000, under the oversight of the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. All parties must adhere strictly to the specified standards and timelines to meet operational readiness requirements for military logistics.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Packaging and Marking Services for Military ShipmentsThe contract requires comprehensive packaging, labeling, and marking services for Interface Units to meet stringent Department of Defense and Defense Logistics Agency standards, specifically adhering to MIL-STD-2073-1E and MIL-STD-129. All work must ensure complete compliance with military specifications for shipment readiness, including proper identification, durability, and uniformity across all units delivered. The services are intended to support military logistics and ensure that equipment is accurately tracked, handled, and deployed under operational conditions. The contract is classified as a subcontract under NAICS code 561910, with performance required at New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. While no set-aside classification or point of contact is specified, the effort is managed under the Department of Defense’s Construction & Equipment T & IFO EQ organization, indicating the scope is tied to critical military equipment logistics. All deliverables must be fully compliant with federal and military directives to ensure seamless integration into the defense supply chain.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 21 hours ago

DEADLINE

Defense-Compliant Packaging and MarkingThis contract requires the packaging and labeling of rivets in strict accordance with MIL-STD-129 and ASTM D3951 standards, ensuring all materials are properly preserved and unitized to meet DLA Master List requirements. The work must be executed to maintain military-grade integrity throughout handling, storage, and transportation, with all markings and documentation fully compliant with federal defense specifications. The packaging process includes proper identification, barcoding, and containment that align with the Department of Defense’s logistical protocols. The contract is issued under the NAICS code 561910 as a subcontract by the ASC Commodities Division of the Department of Defense, with performance expected at Hill Air Force Base, Utah, ZIP 84056-5734. Proposals must be submitted by August 13, 2026, with the solicitation posted on August 5, 2026. All bidders must demonstrate capability to meet exacting defense packaging standards and have the infrastructure to support timely, accurate, and traceable delivery of military-grade components in full compliance with applicable regulations.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires the provision of compliant packaging, labeling, and barcoding for polyurethane coating kits classified as hazardous materials, adhering strictly to Department of Defense standards. All work must meet federal hazardous materials regulations to ensure safe handling, transport, and storage in military logistics environments. The packaging must be durable, corrosion-resistant, and designed to prevent leakage or contamination, while labeling must include all required hazard communications, DOT and UN markings, and DoD-specific identifiers. Barcoding must align with DoD military barcode specifications to enable seamless inventory tracking and distribution through defense supply chains. Performance is mandated at March Air Reserve Base, California, with a zip code of 92518-1748, and the contract is classified as a subcontract under NAICS code 561910 for other support services. The solicitation was posted on August 5, 2026, with responses due by August 11, 2026. The contracting authority is the Defense Logistics Agency under the Department of Defense, and all contractors must demonstrate proven experience in hazardous materials handling and compliance with DoD packaging and labeling protocols to be considered eligible. Failure to meet any technical or regulatory requirement will result in rejection of the proposal.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

Instruction Plate Manufacturing and DeliveryThe contract requires the manufacture and delivery of three military instruction plates identified by NSN 9905008816118, fully compliant with the technical data package TDP Rev A Gen 1 and all referenced part numbers and marking standards. The work must be executed to meet stringent military specifications, ensuring each unit is accurately produced and labeled in accordance with established guidelines. This is a subcontract under the NAICS code 332320, indicating classification within the other fabricated metal product manufacturing sector, and is issued by the Department of Defense through the agency known as DEPOT OKLAHOMA. Performance is to occur at TINKER AFB with a ZIP code of 73145-8000, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. The opportunity is not set aside for any specific small business category, and interested parties must submit proposals via the designated DIBBS portal before the stated deadline.

POSTED

about 21 hours ago

DEADLINE

Certification & Quality Documentation (CDRL-METALSCERT)The contract requires the preparation and submission of a Certificate of Quality Compliance under CDRL-METALSCERT, aligned with DD Form 1423, to verify that all materials meet stringent quality standards. This includes providing full material traceability, documented test results, and explicit confirmation of compliance with SAE AMS6411K specifications, ensuring that all metallic components are manufactured and tested to precise aerospace industry requirements. The documentation must be thorough, accurate, and fully auditable to satisfy the Department of Defense’s quality assurance protocols. The contract is issued under the NAICS code 541380 and is classified as a subcontract tied to the Department of Defense, specifically managed by Depot Oklahoma at Tinker AFB with a postal code of 73145-8000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, indicating a tight turnaround for compliance and submission. All deliverables must be prepared and transmitted through the DIBBS platform using the provided link, and failure to meet the specified technical, traceability, or documentation requirements could result in non-compliance and potential contract penalties.

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

Marking & Labeling ServicesThe contract requires the application of continuous, legible, and waterproof markings on each bar in strict compliance with MIL-STD-129 standards, ensuring that each item is labeled with the National Stock Number, contract number, and heat or lot number using approved marking methods. This work must be performed with precision to meet military specification requirements for identifiability and durability under operational conditions. The contract is issued under the NAICS code 811411 by the Department of Defense through DEPOT OKLAHOMA, with performance located at TINKER AFB, 73145-8000. It is classified as a subcontract and was posted on August 5, 2026, with proposals due by August 17, 2026. All marking activities must adhere to the specified government standards and be executed in a manner that ensures uniformity, traceability, and long-term readability in the field.

Home and Garden Equipment Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

Precision Cutting & Length ConformanceThe contract requires the precision cutting of steel bars to exact whole-foot lengths between 10 and 12 feet, with stringent dimensional accuracy and clean finishes to comply with military specifications. The work must ensure consistent quality and conformance to technical standards expected in defense applications, where even minor deviations in length or cut integrity could compromise performance or integration. This subcontract is issued under NAICS code 332312, indicating it falls within the forged and stamped metal manufacturing sector, and is managed by the Department of Defense through its depot at Tinker Air Force Base, Oklahoma, with performance required at the 73145-8000 ZIP code location. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is actively open for bid submissions. No set-aside classification is specified, meaning eligibility is open to all qualified contractors, regardless of business size or ownership status. The contracting office is based at Tinker AFB, a major aerospace and logistics hub for the U.S. military, underscoring the operational criticality of the deliverables. All work must be performed in accordance with military-grade tolerances, and failure to meet dimensional or finish requirements may result in rejection of the product and potential contract penalties.

Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

Steel Bar Manufacturing & Supply (UNS K23080)The contract calls for the manufacture and supply of round steel bars made from UNS K23080 material, with a precise diameter of 1.250 inches and lengths ranging between 10 and 12 feet, delivered in whole-foot increments. All bars must fully comply with the SAE AMS6411K specification, ensuring the material meets stringent metallurgical and mechanical requirements for performance and consistency. The work is scoped as a subcontract under the NAICS code 331110, indicating it relates to steel mills and ferroalloy manufacturing, and is being procured by the Department of Defense through the Oklahoma Depot at Tinker AFB, with the delivery address set to 73145-8000. Proposals are due by August 17, 2026, with the solicitation posted on August 5, 2026, providing a twelve-day response window for qualified suppliers. The contract is not subject to any specific set-aside provisions, making eligibility open to all competent manufacturers. Performance must be executed to meet or exceed the referenced aerospace and defense standards, given the critical nature of the material for defense applications. Delivery must align with the specified dimensions, tolerances, and material certification requirements, and the successful vendor will be expected to support inspection, testing, and documentation compliance as demanded by the Department of Defense procurement process.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 21 hours ago

DEADLINE

Aluminum Alloy Alclad Sheet ManufacturingThe contract involves the manufacture and supply of aluminum alloy Alclad sheets adhering strictly to military specifications, with exact requirements for dimensions, cladding thickness, and temper designation to ensure performance and durability under demanding operational conditions. The materials must meet rigorous quality standards to support defense applications, and the production process must verify compliance with established technical criteria throughout all phases of fabrication. The contract is a subcontract issued under the NAICS code 331491, with performance obligated at Tinker Air Force Base, Oklahoma, and a response deadline of August 17, 2026. The contracting entity is the Department of Defense through the Depot Oklahoma office, and the solicitation is managed through the DIBBS system under reference SPE8E426T1945. All proposals must be submitted prior to the deadline to be considered, and suppliers are expected to demonstrate proven capability in producing military-grade Alclad sheets to support critical defense infrastructure.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 21 hours ago

DEADLINE

Specialized Packaging, Preservation, and MarkingThe contract requires specialized packaging, preservation, and marking of metal sheets in full compliance with ASTM A700, MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring the materials are protected against environmental degradation and maintained in mission-ready condition. This includes secure palletization methods and the application of NSN labeling to meet military logistics and inventory tracking protocols. All work must be performed to guarantee the integrity of the metal sheets during storage and transit, with strict adherence to defense-specific documentation and handling procedures. The solicitation is issued under a subcontract type by the Department of Defense through the Depot Oklahoma office, with performance required at Tinker AFB, Oklahoma, ZIP 73145-8000. The North American Industry Classification System code is 423840, indicating a focus on wholesale trade in metals and minerals. The response deadline is August 17, 2026, and the opportunity was posted on August 5, 2026, providing potential bidders approximately twelve days to prepare and submit their proposals. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting the rigorous defense packaging and labeling requirements.

Industrial Supplies Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Certification and Documentation Services for Metal SupplyThe contract requires the preparation and submission of quality compliance certificates, mill test reports, and CDRL documentation including DD Form 1423s, all aligned with military aerospace standards to support metal supply requirements. This subcontract is tied to the Department of Defense through the Depot Oklahoma office, with performance expected at Tinker Air Force Base, Oklahoma, 73145-8000. The work demands strict adherence to technical and regulatory frameworks governing aerospace-grade materials documentation, ensuring traceability, material integrity, and compliance with federal defense specifications. Proposals must be submitted by August 17, 2026, following the solicitation issued on August 5, 2026, under NAICS code 541330 which classifies it as engineering services. All deliverables must meet rigorous certification criteria to validate material authenticity and conformity for use in defense systems.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

High-Temperature Corrosion-Resistant Steel Sheet SupplyThe contract calls for the supply of thirteen sheets of cold-rolled, solution heat-treated stainless steel with a composition of 347, strictly conforming to SAE AMS5512N and AMS2807C specifications. Each sheet must meet exact dimensional tolerances and surface finish requirements to ensure suitability for high-temperature, corrosive environments. The material is intended for applications demanding exceptional resistance to oxidation and scaling under sustained thermal stress, typical in aerospace or defense systems. All deliveries must be accompanied by verifiable documentation confirming compliance with the referenced standards and heat treatment processes. This subcontract, issued under NAICS code 331110 by the Department of Defense through its agency at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, has a response deadline of August 17, 2026. The solicitation was posted on August 5, 2026, and the point of performance is firmly located at Tinker AFB. Although the solicitation number and point of contact are not provided, the contract is accessible through the DIBBS platform via the specified link, and suppliers must ensure full adherence to technical and compliance criteria to be eligible for award. The contract does not indicate any set-aside provisions and is open to general subcontractor participation.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 21 hours ago

DEADLINE

Firefighter Gloves SupplyThe contract involves the supply and delivery of firefighter gloves identified by NSN 8415013357904, with all items required to meet military packaging standards and be subject to government inspection upon arrival at the destination. The procurement is part of a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5, and is classified under the NAICS code 315999 for other apparel and accessory manufacturing. The offering is a subcontract opportunity issued by the Department of Defense through the Depot Oklahoma agency, with performance required at Tinker Air Force Base in Oklahoma, zip code 73145-8000. Solicitations must be submitted by the deadline of August 17, 2026, with the request posted on August 5, 2026, and interested parties may access additional details through the official DIBBS platform.

Other Apparel Accessories and Other Apparel Manufacturing

POSTED

about 21 hours ago

DEADLINE

Titanium Sheet Metal SupplySix sheets of hot-rolled, annealed titanium meeting SAE AMS4901V and SAE AMS2809B specifications are being procured under a subcontract issued by the Department of Defense through DEPOT OKLAHOMA, with performance required at TINKER AFB, 73145-8000. The material must be packaged, labeled, and accompanied by full certification to ensure compliance with aerospace and defense quality standards. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is categorized under NAICS code 331492 for other nonferrous metal rolling and drawing. All deliverables must adhere strictly to the referenced military and aerospace material specifications without exception.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 21 hours ago

DEADLINE

Additive Manufacturing Filament SupplyThe contract seeks the supply of industrial-grade filament specifically engineered for additive manufacturing systems used in defense applications, with all materials required to comply with federal logistics and defense supply chain standards. This subcontract is a total small business set-aside under the SBA program, meaning only qualified small businesses may bid, and the NAICS code 325998 identifies the category as other chemical product and preparation manufacturing. The performance location is designated as Tinker Air Force Base with a zip code of 73145-8000, indicating the filament will be delivered directly to a critical Department of Defense facility. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the contract is managed under the Department of Defense through the Depot Oklahoma office, emphasizing the strict quality and compliance controls expected for materials used in military-grade 3D printing operations.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 21 hours ago

DEADLINE