Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Packaging and Preservation Services

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of controlled cooling and drying packaging and preservation services for gaskets in accordance with MIL-STD-2073-1E, specifically under Preservation Code 33. This includes adhering to strict environmental controls throughout the packaging process to ensure the integrity and functionality of the gaskets during storage and transit, as well as the proper documentation of all preservation activities to meet federal military standards. The work must be carried out with attention to detail in handling, sealing, and labeling to prevent contamination or degradation. This is a subcontract classified as a HUBZone Set Aside under NAICS code 385100, indicating eligibility is restricted to businesses located in historically underutilized business zones. The solicitation was posted on July 27, 2026, with a response deadline of August 11, 2026, and is managed by the Department of Defense through the LSO Combat Vehicles and Armament office. While specific performance locations and contact information are not provided, the work is tied to defense logistics and must comply fully with all applicable military packaging and preservation directives.

General Info

HUBZone subcontract for MIL-STD-2073-1E Preservation Code 33 gasket packaging under DoD oversight.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

385100View NAICS

Place of Performance

US

Set-Aside

HZC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide controlled cooling/drying (Preservation Code 33) packaging and preservation for gaskets per MIL-STD-2073-1E, including documentation and environmental controls.

Similar Contracts

Same NAICS industry code

Preservation, Packaging, and Logistics SupportThe contract calls for the application of preservation methods, secure packaging, and proper labeling using NSN, PN, and CAGE codes to ensure compliance with military specifications for hardware and equipment. All items must be prepared and packaged according to established defense standards to maintain integrity during transport and storage, with a focus on environmental protection and long-term usability. The work must be executed in alignment with Department of Defense protocols, ensuring that every step from preservation to final packaging meets strict regulatory requirements. The finished products are to be shipped to Tinker AFB as the designated place of performance, where they will be received and integrated into military supply chains. The activity is formatted as a subcontract under NAICS code 385100, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 31, 2026, with responses due by August 8, 2026, at 4:59 AM, indicating a limited window for submission. All participants must demonstrate capacity to meet military logistics standards and deliver on time to support operational readiness.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Military-Compliant Packaging and MarkingAll delivered items must adhere to military-standard packaging, preservation, and labeling requirements as mandated by DLA and ASTM specifications, ensuring full compliance with defense logistics protocols. The contract mandates rigorous adherence to these standards to guarantee the integrity, longevity, and traceability of materials throughout the supply chain, particularly under harsh operational conditions. This subcontract is solicited under NAICS code 385100 and is performance-centric, with the place of performance fixed at Davis Mission Air Force Base, Arizona, and responses due by August 10, 2026. The solicitation, issued by the Department of Defense under the Construction & Equipment T & IFO EQ office, is designed to secure suppliers capable of meeting strict military packaging criteria, with no set-aside provisions indicated. The contract will be managed through the DIBBS platform, and all participants must align fully with the technical and procedural demands outlined by federal defense standards.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Packaging, Preservation, and Labeling ServicesThe contract requires the provision of military-standard packaging, preservation using Method U, and labeling compliant with D3 specifications for cartridge fuses, ensuring all components meet rigorous defense requirements for durability, environmental protection, and traceability. Bar-code labeling must be applied at every level of containerization to support automated inventory management and logistical tracking throughout the supply chain. The work is tied to the NUCLEAR REACTOR PROGRAM under the Department of Defense and is classified under NAICS code 385100, indicating its focus on electromagnetic and electronic equipment manufacturing. Performance of the services is specifically designated to take place at Hill Air Force Base with a zip code of 84056-5734. The solicitation is structured as a subcontract and is open for responses until August 10, 2026, with submissions due by 17:00 local time.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Industrial Packaging and Palletization ServicesThe contract requires the provision of DLA-compliant packaging, preservation, and palletization services for centrifugal pumps, ensuring full adherence to RP001 and ASTM D3951 standards. This includes the application of corrosion inhibitors and desiccants to protect equipment from environmental degradation during storage and transit, as well as the use of secure crating to maintain structural integrity. All packaging and palletization must meet rigorous military specifications to guarantee readiness and functionality upon delivery. The opportunity is structured as a subcontract under a Total Small Business Set-Aside classification, with the NAICS code 385100 indicating classification within the other commercial equipment manufacturing sector. It is issued by the Department of Defense through the Maritime Supply Chain organization, with performance required at Robins AFB, Georgia, 31098-1887. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with the official reference available through the DIBBS platform.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MIL-STD-129 Labeling and BarcodingThe contract requires the application of MIL-STD-129 compliant labeling, barcoding, and hazardous material warnings on packaging intended for military shipment, ensuring full adherence to Department of Defense standards for identification and safety. All labeling must accurately reflect item information, include machine-readable barcodes, and clearly indicate any hazardous content in accordance with federal regulations to support logistics, tracking, and handling throughout the supply chain. The work is scoped for performance in San Diego, California, with a zip code of 92135-5000, and falls under NAICS code 385100, which pertains to other transportation equipment manufacturing. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with responses due by August 10, 2026, and the solicitation was posted on July 29, 2026. Participants must be prepared to meet strict compliance requirements for military packaging and labeling to ensure seamless integration into DOD logistics systems.

Defense Logistics Agency

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of a rotary file component in strict compliance with ASTM D3951 and DLA RP001 standards, ensuring the component remains protected against environmental degradation during storage and transport. Key preservation methods include the use of desiccants to control moisture and vapor corrosion inhibitors to prevent metal degradation, aligning with military-grade specifications for long-term inventory readiness. The work must be performed to meet the rigorous quality and documentation expectations of the Department of Defense, with performance centered in San Diego, California, under the oversight of the Defense Logistics Agency. This is a subcontract opportunity with a response deadline of August 10, 2026, and falls under NAICS code 385100, which pertains to the manufacturing of surgical and medical instruments. The solicitation is open to contractors capable of delivering compliant packaging solutions that satisfy DoD preservation protocols, though no set-aside preferences are specified. The requirement reflects a critical need for reliable, corrosion-resistant packaging to support military supply chain integrity, with all materials and processes expected to align with federal defense standards without deviation.

Defense Logistics Agency

POSTED

DEADLINE

Packaging, Preservation, and Labeling ServicesThe contract requires specialized packaging, preservation, and labeling services for electrical contact brushes tailored to meet rigorous military standards including MIL-STD-2073-1E for preservation techniques such as cleaning and drying at Level 1, and MIL-STD-129 for uniform labeling requirements. The work must include special handling markings for test samples to ensure traceability and compliance throughout the supply chain, with all processes aligned to Department of Defense specifications for defense-related components. All activities must be performed to exacting standards to maintain functionality and integrity of the brushes under operational conditions. This subcontract is issued under the NAICS code 385100 for Electrical Equipment and Supplies Manufacturing and is managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 28, 2026, with a firm deadline for responses on August 10, 2026. Performance is expected to occur at an unspecified location, and the procurement is open to eligible subcontractors without specific set-aside classification. Interested parties must respond via the provided DIBBS portal before the stated deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Packaging & Barcoding ServicesThe contract requires compliant packaging, marking, and barcoding services for military shipments in accordance with MIL-STD-129 standards, ensuring all items are properly labeled with GS1-128 or Data Matrix barcodes for automated tracking and logistics readiness. Work must be performed to meet strict Department of Defense specifications for durability, legibility, and data accuracy, with all materials and methods engineered to withstand extreme environmental conditions during transport and storage. The place of performance is designated as APO 09309-9998, indicating operations may support overseas or mobile military units, and fulfillment must align with the NAICS code 385100 for military and defense equipment manufacturing and servicing. This is a subcontract opportunity with a response deadline of August 10, 2026, and was posted on July 28, 2026, under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I. The contract supports the broader Department of Defense logistics infrastructure, requiring adherence to federal procurement standards without use of set-aside preferences. Vendors must ensure end-to-end compliance with labeling protocols and packaging standards to facilitate seamless integration into military supply chains, with no flexibility in barcode format or marking criteria. Participation requires proven experience with military logistics systems and the technical capability to deliver consistent, auditable results across all contract tasks.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Bar-Coding and Government Marking ServicesThe contract calls for the application of bar codes, data matrix codes, and military-standard labels compliant with MIL-STD-129 to shipments, ensuring accurate identification and tracking in accordance with Department of Defense requirements. This includes the proper placement of Unique Configuration Identifiers and special handling codes such as Do not bend to meet operational and logistical standards. The work is classified as a subcontract under a HUBZone Set Aside, indicating eligibility is restricted to businesses certified as located in historically underutilized business zones. The North American Industry Classification System code 385100 identifies the scope within the manufacturing of military and government labeling and marking services. Offers must be submitted by the deadline of August 11, 2026, and the solicitation is managed by LSO Combat Vehicles and Armament under the Department of Defense, with performance expected to support military logistics operations without specified geographic limitations.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of packaging and marking services for fiber optic cable assemblies that fully comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, ensuring all items meet stringent Department of Defense standards for durability, traceability, and handling during military logistics. This includes the preparation of Safety Data Sheets and all associated shipment documentation to support secure, compliant transport and inventory management. The work is to be performed in support of maritime supply chain operations under the Department of Defense, with performance specifically tied to Camp Pendleton, California, at the ZIP code 92055-5351. The subcontract opportunity was posted on July 27, 2026, with responses due by August 7, 2026, and is classified under NAICS code 385100 for other communications equipment manufacturing, indicating the technical nature of the required services.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the preservation, packaging, and labeling of pressure switches in full compliance with military standards to ensure longevity and functionality during shipment and storage. This includes the use of moisture barriers and specialized preservation materials to protect the components from environmental degradation, with strict adherence to defense-grade protocols for all packaging processes. Each unit must be properly labeled to meet military identification and handling requirements, ensuring traceability and readiness for deployment. The work is to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. It is classified as a subcontract under NAICS code 385100, which corresponds to electrical equipment manufacturing, and is sponsored by the Electrical Devices Division within the Department of Defense. All activities must align with military specifications to guarantee compatibility with existing logistics and storage systems.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Packaging, Preservation & Labeling Compliance SubcontractorThe contract requires a subcontractor to provide full packaging, preservation, and labeling services for power supplies in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all components meet Department of Defense specifications for military-grade handling and transport. This includes accurate hazard labeling, preparation of Material Safety Data Sheets, and adherence to all documentation and physical packaging requirements necessary for secure and compliant delivery. The work must be performed in accordance with federal military guidelines to ensure operational readiness and safety during storage and transit. The opportunity is listed as a subcontract under the NAICS code 385100, with performance based in San Diego, California, at the ZIP code 92136-3581. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. The contracting entity is the Department of Defense, specifically under the San Diego office, and all activities must align with DoD protocols without deviation. There is no set-aside designation indicated, and participation is open to qualified subcontractors capable of meeting the technical, regulatory, and logistical demands of the requirements.

POSTED

DEADLINE

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

CONNECTOR, PLUG, ELEC

Solicitation # SPE7L4-26-T-5718

The contract solicitation SPE7L4-26-T-5718 seeks 13 units of the electrical plug connector identified by NSN 5935-01-196-4792, with a required delivery within 20 days after award to the Surface Force Logistic Center in Baltimore, Maryland. The solicitation, issued by the Department of Defense’s LSO Combat Vehicles and Armament office, mandates compliance with DLA’s packaging and marking requirements including RP001 for palletization, MIL-STD-129 for item labeling and barcoding, and FED-STD-313 for hazardous materials packaging as defined by the DLA Master List of Technical and Quality Requirements. All items must be physically marked per RQ017 and labeled according to 29 CFR 1910.1200 for hazardous substances. The contract specifies FOB DESTINATION terms, placing all delivery costs and risks on the contractor until goods reach the designated location. Invoicing must be submitted exclusively via the Wide Area WorkFlow system, with manual submissions prohibited, and contractors must register on WAWF to receive payment. Technical and quality compliance is governed by referenced standards and regulatory clauses including ASTM D3951 for non-hazardous item packaging, and the full DFARS and FAR framework applies, including clauses on cyber security (252.204-7012), trafficking in persons, employment eligibility, sustainable products, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. The contract type is not explicitly stated but includes FAR 52.216-1 Alternate I, indicating potential for cost-reimbursement or incentive structures. Offerors must provide a complete data package including information on approved and alternate parts, affirm their small business or socioeconomic status if applicable, and disclose any use of covered defense telecommunications equipment with corresponding UEI and CAGE codes. The solicitation closes on August 5, 2026, and proposals must be submitted electronically through DIBBS. Although pricing data is omitted, historical references suggest a prior unit cost of approximately $1,892.75, but no current pricing or estimated contract value is provided. Inspection and acceptance will occur at the destination by the Government, with standards overseen by the DLA Master List and applicable federal regulations.

Electronic Connector Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L4-26-U-0975

This contract is an indefinite-delivery contract (IDC) issued by the Department of Defense under solicitation SPE7L4-26-U-0975 for the procurement of 175 units of LABEL, identified by NSN 7690015978801, with an estimated total value up to $350,000. The quantity is explicitly noted as an estimate and not guaranteed, and purchases will occur through individual delivery orders issued under the contract’s IDC framework. Delivery is required within 84 days after issuance of a delivery order, with FOB Origin terms applying, meaning the contractor assumes full responsibility for packaging and shipment from the point of origin. All packaging must comply with ASTM D3951, but this is subordinate to the more stringent requirements of the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications. Palletization must conform to RP001: DLA Packaging Requirements for Procurement, and all containers must be marked and labeled in accordance with MIL-STD-129, including barcoding, unit of issue, quantity per unit pack, and hazardous material compliance as per 29 CFR 1910.1200. Inspection and acceptance occur at the destination by the Government. The contract incorporates a comprehensive suite of FAR and DFARS clauses covering equal opportunity, combating trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity (including NIST SP 800-171 requirements), supply chain restrictions on covered telecommunications equipment, whistleblower protections, and secure handling of government information. Invoicing is mandated through the Wide Area WorkFlow system, and payment details are to be determined at award. Offerors must provide a Unique Entity ID and certify their size status and socioeconomic designations, including small business, HUBZone, WOSB, SDVOSB, or other categories, with full disclosure required for joint ventures. The solicitation prohibits submission of radioactive materials without prior approval and requires compliance with the Buy American Act and Berry Amendment. No formal evaluation factors are published, but award is expected to follow a price-based selection process under an automated system, focusing on technically acceptable offers at the lowest price.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

HANDLE, DOOR, VEHICUL

Solicitation # SPE7L4-26-T-5719

The contract solicitation SPE7L4-26-T-5719 is for the procurement of 68 units of a vehicular door handle (NSN 2540-01-564-0386) at a unit price of $68.00, for a total value of $4,624.00. Delivery is required within 331 days after award, with FOB origin terms and destination inspection and acceptance. The item must be packaged and labeled per MIL-STD-129, with palletization following DLA’s RP001 requirements; if hazardous under FED-STD-313, packaging adherence to TQ Requirement IP025 is mandatory, otherwise commercial packaging per ASTM D3951 applies with precedence given to the DLA Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval. All shipping must be addressed to DLA Distribution Red River in Texarkana, Texas, and invoicing must be conducted electronically through WAWF. The contract includes federal acquisition regulation clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, NIST SP 800-171 compliance, transportation by sea, and prohibitions on unauthorized obligations. Offerors must comply with representations regarding small business status, UEI and CAGE codes, and disclosure of covered defense telecommunications equipment if applicable. The solicitation imposes no variance in quantity (plus or minus 0%), requires full compliance with all referenced standards, and mandates electronic submission via DIBBS by the deadline of July 31, 2026. The contract type has not been finalized, and no options or extended performance periods are currently defined beyond the base delivery schedule.

Hardware Manufacturing

POSTED

DEADLINE

Hazardous Materials Compliance ConsultingThe contract seeks regulatory consulting services to ensure compliance with OSHA Hazard Communication standards and DFARS requirements concerning hazardous materials identification and documentation. The work involves comprehensive management of Safety Data Sheets, accurate inventorying of hazardous substances, and the preparation of detailed compliance reports to meet federal regulatory obligations. The contractor will be responsible for systematically documenting all hazardous materials used or stored within the scope of the project, ensuring proper labeling, employee training readiness, and alignment with defense-specific procurement regulations. Performance is to be conducted at a location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is structured as a subcontract under NAICS code 541620, which designates environmental and other technical consulting services. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, indicating a short, time-sensitive procurement window. The project falls under the purview of the Department of Defense, specifically LSO Combat Vehicles and Armament, and requires precise adherence to defense-industry compliance frameworks, making expertise in both federal safety and defense acquisition regulations essential for successful proposal submission and execution.

Environmental Consulting Services

POSTED

DEADLINE

Transportation and Freight Logistics (FOB Origin)The contract pertains to the coordination and execution of freight movement under FOB Origin terms, encompassing both domestic and international shipping with full compliance to sea transport regulations. Responsibilities include managing the logistics chain from the point of origin through delivery, ensuring adherence to applicable freight and maritime standards regardless of destination. The work will be performed in New Cumberland, Pennsylvania, with the ZIP code 17070-5002 designated as the place of performance, though the actual freight routes may extend globally. The solicitation is classified as a subcontract under NAICS code 484121 which corresponds to general freight trucking, indicating the scope likely involves multimodal transport with trucking as a primary component linked to ocean freight. The contracting activity is under the Department of Defense, specifically managed by LSO COMBAT VEHICLES AND ARMAMENT, highlighting the critical nature of the shipments likely involving military equipment or defense-related cargo. The opportunity was posted on July 30, 2026, with a response deadline of August 10, 2026, and is accessible via a DIBBS platform link. While no set-aside type or point of contact is specified, bidders must be prepared to meet stringent logistical and compliance requirements necessary for defense-related freight operations, particularly those involving international maritime transport.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Marking and Serialization ServicesThe contract titled Marking and Serialization Services requires comprehensive adherence to MIL-STD-129 standards for the application of standardized markings, labels, and serial number documentation on military equipment and components. This includes the implementation of barcoding, RFID tagging, and the generation of accurate packing lists to ensure end-to-end traceability and logistics compliance. All work must be executed with precision to meet Department of Defense requirements for identification, tracking, and inventory management across the supply chain. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where these services must be rendered. This is a subcontract opportunity under NAICS code 339950, which pertains to other military and defense-related manufacturing activities. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026. The contract falls under the purview of the LSO Combat Vehicles and Armament office, operated by the Department of Defense, and is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the opportunity is open to all qualified subcontractors without preference for small businesses or other categories. Failure to comply precisely with MIL-STD-129 specifications could result in rejection of deliverables and non-payment.

Sign Manufacturing

POSTED

DEADLINE

Military-Compliant Packaging and Crating ServicesThe contract requires specialized packaging and crating services compliant with MIL-STD-2073-1E and DLA RP001 standards, ensuring materials are properly preserved, cushioned, and containerized for secure military transport. All work must adhere strictly to government-mandated protocols for protection against environmental damage, physical shock, and corrosion during transit, covering the full lifecycle from preparation to final sealing of shipments. The performance location is designated as New Cumberland, Pennsylvania, with an effective deadline for responses set for August 10, 2026, and the solicitation was posted on July 30, 2026. This is a subcontract opportunity under NAICS code 488410, managed by the Department of Defense through its LSO Combat Vehicles and Armament office, targeting vendors capable of delivering defense-grade packaging solutions meeting stringent military specifications.

Motor Vehicle Towing

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThe contract pertains to the proper handling, packaging, and labeling of hazardous materials in strict adherence to OSHA HAZCOM and MIL-STD-129 standards, requiring accurate documentation of serial numbers and comprehensive safety data for all regulated items. This subcontract is part of a Department of Defense initiative under the LSO COMBAT VEHICLES AND ARMAMENT agency, with performance expected to occur at the facility in New Cumberland, Pennsylvania, 17070-5002. The North American Industry Classification System code 332430 indicates the work involves metal stamping and related manufacturing activities, suggesting the packaging and labeling efforts support defense equipment production. All activities must ensure full regulatory compliance to guarantee safe transportation, storage, and use of hazardous substances within military logistics systems. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, at 5:00 PM, indicating a narrow window for qualified subcontractors to submit proposals. The contract does not specify a set-aside type, meaning it is open to all eligible bidders without restrictions based on business size or ownership characteristics. While no point of contact is listed, interested parties can access additional details through the official DIBBS platform using the provided link. Compliance with both federal occupational safety and military shipping standards is non-negotiable, and bidders must demonstrate proven experience with hazardous material protocols, serial number tracking, and safety data sheet management to be considered for award.

POSTED

DEADLINE

Small Business & Socioeconomic Category Subcontracting (Set-Aside Participation)Small businesses and firms belonging to specific socioeconomic categories are invited to participate as subcontractors or suppliers in support of a Department of Defense initiative led by LSO COMBAT VEHICLES AND ARMAMENT. The opportunity is tied to a subcontracting arrangement under NAICS code 332994, targeting potential diversity and inclusion goals for the prime contractor. Responses must be submitted by August 10, 2026, with the solicitation posted on July 30, 2026, and performance expected to take place in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Participation is designed to help fulfill set-aside objectives, though the specific type of set-aside is not detailed. The engagement is open to qualifying small and socioeconomic category firms seeking to align with federal contracting diversity initiatives. Further details can be accessed through the provided DIBBS link.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Industrial Supply of Specialty ComponentsThe contract calls for the supply of specialty industrial components, with specific requirements for mercury-containing items that must be engineered with shock-proofing and secondary containment systems in compliance with NAVSEA 5100-003D standards. These components are critical for use in defense applications and demand stringent handling and packaging protocols to ensure safety and regulatory adherence throughout transportation and deployment. The work is to be performed at New Cumberland, Pennsylvania, with the ZIP code 17070-5002 identified as the official place of performance. This is a subcontract opportunity under the NAICS code 423830, which pertains to wholesale trade of industrial supplies. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with no set-aside provisions designated. The contracting activity falls under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, indicating the components are intended for military vehicle or armament systems. All bids must meet the technical and safety specifications outlined in the naval specification to be considered acceptable, and vendors are expected to demonstrate proven capability in handling hazardous materials within defense supply chains.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Global Freight & Defense Logistics ShippingThe contract encompasses the global transportation and logistics management of defense supplies, with strict requirements to use U.S.-flag vessels whenever mandated by regulation and full adherence to Defense Logistics Agency packaging and reporting standards. All freight movement must be executed in compliance with federal defense logistics protocols, ensuring secure, traceable, and timely delivery of critical defense materiel across international boundaries. The work demands specialized expertise in military-grade shipping, documentation, and supply chain integrity under rigorous governmental oversight. Performance is centered at NEW CUMBERLAND, PA, with the obligation to meet all operational timelines and regulatory benchmarks set by the Department of Defense under the LSO COMBAT VEHICLES AND ARMAMENT office. Subcontractors must respond by August 10, 2026, and possess the capacity to handle sensitive defense cargo while maintaining compliance with NAICS code 488510, which governs freight transportation arrangement services. The contract requires full transparency in operations, accurate reporting, and seamless coordination with U.S. defense logistics networks to support national security missions.

Freight Transportation Arrangement

POSTED

DEADLINE

Hazardous Materials Compliance & Packaging ServicesThe contract requires comprehensive packaging, labeling, and documentation services for hazardous materials shipments, with strict adherence to military standards MIL-STD-129 and MIL-STD-2073-1E to ensure proper handling and identification throughout the supply chain. All work must include accurate labeling of hazardous contents and mandatory notifications for any radioactive materials, ensuring full regulatory compliance and safety during transport and storage. The services are critical for supporting Department of Defense operations and must be executed with precision to meet federal and military compliance requirements. This subcontract is solicited under NAICS code 561910 and is performance-based, with the place of performance located in New Cumberland, Pennsylvania, at zip code 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The effort supports LSO Combat Vehicles and Armament under the Department of Defense, with all deliverables expected to align with DoD protocols for hazardous material logistics. Participation requires proven expertise in military packaging standards and the ability to manage complex regulatory obligations surrounding dangerous goods and radiological notifications.

Packaging and Labeling Services

POSTED

DEADLINE