Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Packaging, Marking, and DLA Distribution Compliance

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires strict adherence to DLA Packaging Requirements RP001 and military logistics standards for the packaging and marking of electronic modules destined for delivery to Defense Logistics Agency facilities within the Continental United States. All work must ensure that modules are properly enclosed, labeled, and documented to meet federal military shipment protocols, guaranteeing compatibility with DLA’s receiving, inventory, and distribution systems. Compliance is non-negotiable and mandatory for successful fulfillment, with no tolerance for deviations from the specified packaging and marking criteria. This is a subcontract under the NAICS code 561910, managed by the Department of Defense’s Land Supplier Operations SMSG, with a response deadline of August 11, 2026. The performance location is not specified beyond CONUS, but the contractor must be prepared to deliver to any DLA facility within the contiguous United States. The solicitation is open for submissions until the stated deadline, and all submissions must fully demonstrate capability to meet the technical and regulatory demands of DLA’s logistics infrastructure. Failure to comply with packaging and marking standards may result in rejection of deliveries and contract penalties.

General Info

Must comply with DLA RP001 packaging and marking standards for CONUS military electronic module deliveries by August 11, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPERATIONS SMSGView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPERATIONS SMSG

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPERATIONS SMSG

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure electronic modules are packaged and marked per DLA Packaging Requirements (RP001) and military logistics standards for delivery to DLA facilities in CONUS.

Similar Contracts

Same NAICS industry code

Packaging, Marking & Labeling ServicesThe contract requires the provision of packaging, marking, and labeling services fully compliant with MIL-STD-129 standards for military shipment and storage, including the application of data matrix codes and proper container marking to ensure accurate tracking and handling throughout the supply chain. All work must adhere strictly to Department of Defense specifications for barcoding and labeling to support seamless inventory management and logistical operations. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract falls under NAICS code 561910 for other support activities for warehousing and storage. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 5, 2026, and the solicitation was posted on July 31, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Compliant Labeling & BarcodingThis contract requires full compliance with MIL-STD-129 for the labeling and barcoding of each boxed kit, ensuring that all markings meet military standards for identification and traceability. Each box must include an internal contents list and be properly marked with accurate barcodes and required data elements to support logistics and inventory management across military supply chains. The work is part of a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance centered at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is scheduled to close on August 5, 2026, and is classified under NAICS code 561910, indicating it involves support activities for material handling and logistics services. All deliverables must be executed with precision to ensure operational readiness and regulatory adherence.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Compliant Packaging & PreservationThe contract requires the packaging and preservation of assembled adapter kits in strict compliance with MIL-STD-2073-1E, specifically employing preservation method 10, which entails cling wrapping and drying to ensure long-term protection against environmental degradation. The work includes appropriate cushioning materials to prevent damage during handling and transit, as well as the consolidation of all components into single, properly labeled boxes to meet military logistics standards. All packaging must adhere to the rigorous durability, labeling, and containment requirements defined by the military standard to ensure readiness and compatibility with defense supply chains. This subcontract is issued under NAICS code 561910, indicating it falls under Other Support Activities for Transportation, and is tied to the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 31, 2026, with responses due by August 5, 2026, creating a tight five-day window for submission. Interested parties must respond through the official DIBBS portal using the provided reference number SPE4A726T519U. There is no set-aside designation specified, meaning the contract is open to all qualified subcontractors regardless of business size or ownership status.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the packaging and labeling of engineering plastic rods and shipping containers in full compliance with MIL-STD-129 standards, including the application of AI-coded barcodes, serialized product labels, and specific handling markings to ensure traceability and military readiness. All work must adhere to strict defense logistics protocols, with an emphasis on accuracy, durability, and uniformity across all labeled items and containers to support DoD supply chain operations. The deliverables are intended for performance at Crane, Indiana, with a zip code of 47522, and the contract is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside category, classified under NAICS code 561910 for other support services. The solicitation remains open until August 14, 2026, at 8:00 PM Eastern Time, with the opportunity posted on SAM.gov on July 31, 2026. The award will be made under a subcontract structure, and the contracting activity is managed by the Naval Surface Warfare Center, Crane Division, under the Department of Defense. While no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal to be considered. Compliance with all labeling and packaging specifications is mandatory, and failure to meet MIL-STD-129 requirements will result in rejection of deliverables, regardless of other qualifications.

POSTED

DEADLINE

Packaging, Preservation, and Marking

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Product Labeling and Traceability ServicesThe contract requires the proper application of labels on all food items, clearly displaying the pack date and origin to ensure compliance with traceability standards. A decoding key must be made available upon request to facilitate interpretation of label information, supporting transparency and regulatory adherence. This service is classified as a subcontract under NAICS code 561910 and is issued by the state of Iowa, with a response deadline of August 13, 2026. The work is expected to be performed in Iowa, though the exact location is unspecified. Interested parties must submit their proposals by the stated deadline through the provided public bidding portal.

POSTED

DEADLINE

Palletized Packaging and Shrink-Wrapping ServicesThe contract involves the preparation of food shipments on pallets using industrial shrink-wrapping to ensure secure, safe handling and reliable delivery throughout the supply chain. The work requires precise packaging protocols that maintain product integrity, comply with food safety standards, and facilitate efficient logistics during transit. All services must be performed to meet strict handling requirements suitable for perishable and non-perishable food items, with attention to durability, contamination prevention, and dimensional stability of packed pallets. The solicitation is classified as a subcontract under NAICS code 561910, with a response deadline of August 13, 2026. It is issued by the Iowa agency and does not specify a set-aside classification or point of contact. The place of performance and office address details are unspecified, but the work is expected to support state-level food distribution operations. Interested parties must submit proposals through the provided online portal by the stated deadline to be considered for award.

POSTED

DEADLINE

Barcoding and Labeling ServicesThe contract seeks qualified providers to apply GS1-128 barcodes and physical markings in full compliance with MIL-STD-129 standards to unit packs and shipping containers, ensuring accurate identification and traceability throughout military logistics chains. Work must be performed at the specified location in Jacksonville, Florida, with a zip code of 32212-0103, and all labeling must meet stringent Department of Defense requirements for format, placement, durability, and data content. This is a subcontract opportunity under NAICS code 561910, which covers other support activities for transportation, and was posted on July 30, 2026, with responses due by August 7, 2026. All bidders must be prepared to demonstrate capability in handling military-grade labeling systems and adhering to strict compliance protocols without deviation. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, and performance is tied directly to sustaining readiness through proper packaging and labeling of military shipments.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging and Preservation ServicesThe contract requires the provision of packaging and preservation services for nuts in strict compliance with MIL-STD-2073-1E, ensuring all materials are clean, dry, and free from corrosion prior to shipment. The work must meet federal military standards for long-term storage and transportation integrity, with attention to environmental protection and material suitability for defense logistics. The performance location is established at Jacksonville, Florida, with a zip code of 32212-0103, indicating the physical site where services must be rendered. This is a subcontract under the NAICS code 561910, which classifies it within waste management and remediation services, though the actual work pertains to military-grade packaging. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, allowing interested parties a seven-day window to submit proposals. The contract is managed by the ASC Commodities Division within the Department of Defense, and details can be accessed via the provided DIBBS link, which serves as the official portal for submission and information. No specific set-aside provisions are indicated, meaning the opportunity is open to all eligible subcontractors.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging, Marking, and Preservation ServicesThe contract requires the packaging, preservation, and labeling of vehicular cab doors in strict compliance with MIL-STD-129 and ASTM D3951 standards, ensuring military-grade protection and traceability. All items must be properly barcoded and sealed with protective materials to maintain integrity during storage and transit, with adherence to labeling requirements for logistical tracking and handling. The work must be performed by a small business as the contract is a total small business set-aside under FAR 19.5, and the NAICS code 561910 indicates it falls under Other Support Activities for Transportation. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with the contracting entity under the Department of Defense, specifically Land Supplier Opns Vehicle Spt, managing the procurement.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Packaging, Labeling, and Marking ServicesThe contract requires the provision of comprehensive packaging, labeling, and marking services for switch guards in full compliance with MIL-STD-129 standards, ensuring all items are properly barcoded and labeled for delivery to the Defense Logistics Agency. This includes adherence to all federal requirements for hazardous material handling and documentation if the switch guards contain regulated substances, with strict attention to safety and regulatory protocols. The work must be executed to meet DLA’s logistical and inventory control needs, with accurate and scannable identification systems integrated into every package. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of August 10, 2026, and the solicitation is classified as a subcontract under NAICS code 561910. The contracting entity is the Electrical Devices Division within the Department of Defense, and all deliverables must align with military specification requirements to ensure seamless integration into the broader defense supply chain. Timely submission and full compliance with labeling and packaging standards are critical to contract fulfillment.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Packaging and Labeling ServicesThe contract requires provision of packaging and labeling services for torque tubes in full compliance with MIL-STD-129 standards, ensuring all items are properly identified, marked, and enclosed according to U.S. Department of Defense specifications. This includes the application of hazardous material labeling as required by federal regulations and the use of standardized government identifiers to support logistics, tracking, and inventory management across military supply chains. All packaging must meet strict durability, containment, and labeling criteria to ensure integrity during transit and storage under operational conditions. The solicitation is issued under NAICS code 561910 as a subcontract opportunity by the ASC Commodities Division within the Department of Defense, with responses due by August 13, 2026. Performance is expected to support defense logistics operations, though specific location details for place of performance are not provided. Interested parties must submit proposals through the DIBBS platform by the deadline to be considered, with strict adherence to military packaging and labeling protocols being a non-negotiable requirement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPERATIONS SMSG

Same awarding agency

Quality Assurance and Inspection at Origin ServicesThe contract requires the provision of quality assurance services that include inspection at origin, management of configuration changes, and the preparation of Certificates of Conformance consistent with RQ001 and source control drawings. These tasks are critical to ensuring product integrity and compliance with specified technical standards prior to delivery. The work must be performed in alignment with stringent Defense Department requirements, emphasizing rigorous documentation and adherence to approved configurations throughout the supply chain. This is a subcontract under the NAICS code 541380, issued by the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, with a response deadline of August 11, 2026. The solicitation was posted on July 31, 2026, and the performance location is not specified beyond the requirement to conduct inspections at origin. There is no set-aside designation, and the point of contact information is not provided, though all submissions must be made through the DIBBS platform using the referenced solicitation number SPE7MX26RX025.

Testing Laboratories and Services

POSTED

DEADLINE

Export Control and ITAR Compliance ManagementThe contract requires comprehensive management of export-controlled technical data in alignment with ITAR and DFARS 252.225-7048 regulations. Responsibilities include administering the DLA Export-Controlled Technical Data Questionnaire, coordinating mandatory compliance training for personnel, and ensuring all access to controlled technical data is properly authorized, documented, and monitored. The contractor must establish and maintain robust systems to prevent unauthorized disclosure, track compliance activities, and respond to audit or inspection requirements related to international traffic in arms regulations. This subcontract is issued under the Department of Defense’s Land Supplier Operations SMSG and falls under NAICS code 541611, indicating it pertains to management consulting services focused on compliance and regulatory affairs. The response deadline is August 11, 2026, with the solicitation posted on July 31, 2026. There is no designated set-aside status, and performance location details are not specified. The contractor must possess expertise in defense export control frameworks and the ability to implement and enforce strict procedural controls to safeguard sensitive technical data.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cybersecurity Compliance and CMMC Assessment SupportThe contract seeks a subcontractor to deliver comprehensive third-party cybersecurity services aimed at achieving and maintaining CMMC Level 2 certification for the Department of Defense. The scope includes conducting a detailed gap analysis to assess current cybersecurity posture against CMMC requirements, implementing system hardening measures to address vulnerabilities, developing and organizing all necessary documentation to demonstrate compliance, and coordinating directly with C3PAO assessors to facilitate the certification process. The contractor must possess proven expertise in CMMC frameworks and be capable of managing all technical and administrative aspects of compliance without direct oversight from the prime contractor. This is a subcontract under the NAICS code 541512 for Computer Systems Design Services, issued by LAND SUPPLIER OPERATIONS SMSG. The solicitation was posted on July 31, 2026, with responses due by August 11, 2026. Performance location details are unspecified but are expected to align with the Department of Defense’s operational units requiring certification. The contracting activity is managed through the DIBBS platform, and the subcontractor must be prepared to operate within strict DoD compliance timelines and security protocols, ensuring all deliverables meet the full scope of CMMC Level 2 standards without delays or deficiencies.

Computer Systems Design Services

POSTED

DEADLINE

Electronic Module Manufacturing and SupplyThe contract award entails the full lifecycle production, testing, and delivery of a commercial Electronic Module identified by NSN 5963-01-590-2418, manufactured strictly in accordance with source-controlled drawing 12423734-001. This includes comprehensive configuration control to ensure all design and process changes are documented and approved, rigorous quality assurance protocols to meet military and industry standards, and precise packaging and marking procedures to ensure traceability and handling integrity throughout the supply chain. Origin inspection is required to verify that all components and materials originate from approved sources and comply with applicable regulations. The work is categorized under NAICS code 334418 for other electronic component manufacturing and is structured as a subcontract under the Department of Defense through LAND SUPPLIER OPERATIONS SMSG. All deliverables must be completed and submitted by the response deadline of August 11, 2026, with performance expected to align with the stringent technical and logistical requirements typical of defense-related procurement.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

ELECTRONIC MODULE, S

Solicitation # SPE7MX-26-R-X025

The solicitation for ELECTRONIC MODULE, S with NSN/Part Number 5963-01-590-2418 is issued under SPE7MX-26-R-X025 and is posted on DIBBS with a response deadline of August 11, 2026. The official product identifier (PID), referenced as Attachment 2, governs the exact technical requirements and must be used for all quotations, superseding any other descriptions or information provided alongside the request. This PID becomes a binding part of any resulting contract and cannot be altered unless formally amended by the Contracting Officer. The solicitation includes only one item with specified part number and source control drawing references, and the item may carry unique attributes such as special quality codes or restrictions that must be fully understood and complied with by offerors. The contracting activity is under the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, and the place of performance and point of contact information are not specified in the provided data. The solicitation remains accessible until it is removed from DIBBS or amended.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Small Business Subcontracting Support (Administrative & Compliance)The contract requires support to assist a prime contractor in meeting small business subcontracting plan compliance, reporting obligations, and maintaining all necessary Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement documentation to satisfy evaluation criteria. This administrative and compliance-focused engagement ensures that subcontracting goals are accurately tracked, reported, and aligned with federal requirements, thereby securing favorable evaluations during contract performance reviews. The work will involve ongoing monitoring of subcontractor performance, preparation of required submissions, and adherence to procedural guidelines to maintain compliance throughout the contract lifecycle. The solicitation is classified under NAICS code 541611 and is issued by the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, with a response deadline of August 28, 2026. The type of procurement is designated as a subcontract, indicating the work is part of a larger prime contract effort. No specific set-aside classification or place of performance details are provided, and no point of contact information is listed. The task remains centered entirely on administrative and compliance functions to uphold the integrity of the prime contractor’s small business subcontracting program as mandated by federal regulations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Transportation and Logistics (FOB Origin to Destination)The contract covers freight transportation services from the contractor’s facility at FOB Origin to designated government destinations, requiring full compliance with all applicable transportation policies and rigorous tracking of shipments throughout transit. The work involves end-to-end logistics management, ensuring timely, secure, and accountable delivery of goods to U.S. Department of Defense locations under the oversight of LAND SUPPLIER OPERATIONS SMSG. All transport must adhere to federal regulations and contractual obligations regarding documentation, handling, and visibility of cargo. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation except for waste and miscellaneous items. The response deadline is August 28, 2026, with the opportunity posted on July 29, 2026. While specific performance locations and contact details are not provided, the contract expects full adherence to DoD protocols, real-time shipment tracking, and compliance with all governing transportation standards. Interested parties must review the official solicitation link for detailed requirements, submission guidelines, and contractual terms before the deadline.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging, Marking, and Preservation ServicesThe contract requires the provision of DLA-compliant packaging, preservation, and labeling services for coupling assemblies, ensuring full adherence to military standards for shipment and handling. This includes the application of MIL-STD-129 barcode labels for traceability and the inclusion of special handling tags to indicate unique storage or transport requirements. The work must meet rigorous defense logistics standards to maintain component integrity through the supply chain, with all packaging and marking procedures aligned to Department of Defense specifications. The solicitation, issued under NAICS code 561910 for other support services, is structured as a subcontract opportunity managed by the Land Supplier Operations SMSG under the Department of Defense. Response submissions are due by August 28, 2026, and performance is expected to support defense logistics networks, though specific location details for performance are not provided. Interested parties must access the full solicitation through the DIBBS portal to understand technical requirements, compliance criteria, and submission protocols.

Packaging and Labeling Services

POSTED

DEADLINE

Quick Disconnect Coupling Assembly SupplyThe contract pertains to the manufacture and supply of Quick Disconnect Coupling Assemblies identified by NSN 4730-01-296-5759, with quantities to be determined per individual order. Deliveries must be completed within 122 days of order placement, ensuring timely fulfillment of operational requirements. The procurement is classified as a subcontract under the NAICS code 332994, which corresponds to Other Fabricated Metal Product Manufacturing, and is managed by the Department of Defense through the Land Supplier Operations SMSG office. The solicitation was posted on July 29, 2026, with responses due by August 28, 2026, indicating a one-month window for proposal submission. All work is expected to be performed under the authority of the Department of Defense, with no specific set-aside designation applied, and performance location details are not specified in the available data.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

COUPLING ASSEMBLY, QUICK DISCONNECT

Solicitation # SPE7MX-26-R-X049

The solicitation SPE7MX-26-R-X049 seeks a Firm-Fixed-Price contract for the procurement of Coupling Assemblies, Quick Disconnect, identified by NSN 4730-01-296-5759, under commercial item procedures. The contract is managed by DLA Land and Maritime, Land Supplier Operations SMSG, with a response deadline of August 28, 2026, and is issued through the DIBBS portal. Delivery is required FOB Origin, with inspection and acceptance occurring at Destination, and the ordering period extends one year from contract award, with potential deliveries extending up to one year beyond expiration under certain conditions. The contract allows for multiple quantity ranges from 39 to 930 units, with potential two-year option periods, and carries an estimated total value between $4,680.82 and $2,295,018.36. All packaging and marking must strictly adhere to the attached PID, Packaging, and Marking document, incorporating DLA’s RP001 standards, MIL-STD-129 for labeling including mandatory phrases such as “Product Verification Test Samples – Do Not Post to Stock,” and compliance with specified barcode formats. Preservation methods are governed by RP001 but not detailed in the solicitation. Evaluation will be conducted on a best-value trade-off basis, where price, past performance, proposed delivery, and small business participation are assessed as equal in importance. Price is weighted heavily based on unit pricing across four quantity tiers, with unrealistic pricing leading to rejection. Past performance is evaluated through SPRS records for quality and delivery history, while delivery timelines are scored favorably based on speed. Small business participation must meet FAR and DFARS requirements for subcontracting commitments to SDB, WOSB, SDVOSB, HUBZone, and other designated categories, with adjectival ratings applied. Offerors must declare their socioeconomic status through SAM.gov and comply with representations under FAR 52.219-28. Compliance with CMMC Level 1–3 is mandatory depending on data handling, requiring annual affirmations in SPRS and flowdown to subcontractors. Invoicing is exclusively through WAWF using electronic methods, and payment is processed via PO Box 3990 in Columbus, OH. The contract imposes strict adherence to DFARS and FAR clauses including 52.217-9 for option extensions,

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Environmental Compliance – Ozone-Depleting Chemicals SubstitutionThe contract pertains to environmental compliance efforts focused on the substitution of Class I ozone-depleting chemicals, requiring detailed certification and planning to ensure regulatory adherence. It involves submitting approvals for alternative chemicals in accordance with CS187/E0082 protocols, aiming to phase out harmful substances used in military or government operations. The work must be executed by a subcontractor with technical expertise in environmental chemistry and compliance, ensuring all substitutions meet federal environmental standards and operational requirements. The solicitation was posted on July 24, 2026, with a response deadline of August 23, 2026, and falls under NAICS code 541620, indicating it involves environmental consulting services. The contracting entity is the Department of Defense through its LAND SUPPLIER OPERATIONS SMSG office, though specific performance location and point of contact details are not provided. The contract is structured as a subcontract, suggesting it supports a larger procurement or compliance initiative within the defense supply chain, focusing on sustainable and legally compliant material transitions.

Environmental Consulting Services

POSTED

DEADLINE

Export Control Compliance and Technical Data ManagementThe contract requires comprehensive management of export-controlled technical data, with strict adherence to ITAR and EAR regulations to ensure proper handling, access, and dissemination of sensitive specifications. A key requirement is obtaining and maintaining JCP certification, which governs authorized personnel access to controlled information and enforces compliance with U.S. export control laws. The subcontract is focused on technical data management for defense-related applications under the Department of Defense, specifically through LAND SUPPLIER OPERATIONS SMSG, and requires all activities to align with regulatory standards to prevent unauthorized disclosure or transfer of controlled information. The solicitation is open for responses until August 23, 2026, and is classified under NAICS code 541611 for Administrative Management and General Management Consulting Services, indicating that the scope involves procedural oversight and compliance management rather than direct manufacturing or production. The place of performance and point of contact details are not specified, suggesting flexibility in execution but emphasizing the need for contractors to establish secure, auditable processes for data control regardless of location. All parties must implement rigorous internal controls, documentation protocols, and training programs to maintain regulatory compliance throughout the contract term.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE