Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machined Grooved Pulley Manufacturing

Active

Federal

Response Deadline08/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of 2,405 precision-machined grooved pulleys designated by NSN 3020002771123 and part number MS20220-2, all produced to strict military specifications for critical applications. These components are essential for reliable operation in high-stakes environments and must meet exacting quality and performance standards. The work is to be performed at Tinker AFB, Oklahoma, with the full scope delivered under a subcontract arrangement. This procurement is set aside exclusively for HUBZone-certified small businesses, reflecting a federal initiative to promote economic development in historically underutilized business zones. The North American Industry Classification System code 332721 identifies the appropriate manufacturing category, and the solicitation was posted on August 10, 2026, with a response deadline of August 21, 2026. The contracting activity falls under the Fluid Handling Division of the Department of Defense, and the contract is accessible through the DIBBS system using the referenced UI link.

General Info

2,405 precision grooved pulleys for military use, HUBZone small business set-aside, Tinker AFB delivery.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332721 - Precision Turned Product ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

HZC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 10

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 2,405 grooved pulleys (NSN: 3020002771123, Part No: MS20220-2) to military specifications for critical application use.

Similar Contracts

Same NAICS industry code

Precision Machined Component Manufacturing – SPACER, RING

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Precision Manufacturing of Lever Assembly – Power-Speed ControlThe contract involves the precision manufacture and assembly of a lever assembly designed for power-speed control, strictly adhering to military specifications. This includes all stages of production such as machining, quality control inspections, and final verification to ensure compliance with rigorous defense standards. The work must be performed at the designated place of performance in JB MDL with a zip code of 08641-5500, and the North American Industry Classification System code is 332721, indicating a focus on forged and stamped metal product manufacturing. The solicitation was posted on August 10, 2026, with a response deadline of August 21, 2026, and it is structured as a subcontract under the Department of Defense’s Land Supply Chain. All deliverables must meet exacting technical and quality benchmarks to support critical defense systems.

LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Precision Fastener Supply (PIN-RIVET)

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Machining of Machine BoltsThe contract mandates the precision manufacturing of 111 machine bolts identified by NSN 5306-00-207-2490, fully compliant with military or industrial specifications covering all phases from material procurement through final machining, surface finishing, and quality assurance. Production must adhere to strict technical standards to ensure dimensional accuracy, material integrity, and performance under operational demands, with all work subject to verification and compliance protocols typical of defense supply chains. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where the manufacturing and quality control activities must be executed. This is a subcontract opportunity issued under NAICS code 332721, associated with the ASC Commodities Division of the Department of Defense, and is open for responses until August 18, 2026, with the solicitation posted on August 10, 2026. All participants must be prepared to meet exacting documentation and certification requirements to validate conformance to military standards, though no specific set-aside status is indicated. The full solicitation details can be accessed via the provided DIBBS link, and bidders are expected to demonstrate capacity to deliver the full quantity on schedule with traceability of materials and adherence to quality systems applicable to defense procurement.

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Packing Retainers (RETAINER, PACKING, RING, GLAND, STUFFING)The contract requires the precision manufacturing of five units of a mechanical packing retainer designated by NSN 5330-01-286-7485, specifically a ring-type gland stuffing retainer, to meet stringent military specifications. The component must be asbestos-free and engineered for reliable sealing performance in demanding operational environments. All manufacturing must adhere to approved technical standards ensuring dimensional accuracy, material integrity, and functional suitability for defense applications. This is a subcontract opportunity issued under the NAICS code 332721 for machine shops and related services, solicited by the Department of Defense through the Land Supply Chain. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026. Performance is to be conducted at the FPO location with ZIP code 96349. The procurement is not subject to any set-aside designation, and interested parties must submit proposals through the designated DIBBS portal before the deadline to be eligible for award.

LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Coupling Retainer (NSN: 4730015590320)The contract is for the supply and delivery of 216 units of RETAINER, COUPLING with National Stock Number 4730015590320, specifically to meet United States Department of Defense standards. All items must comply with military packaging and labeling regulations and adhere to the full scope of defense supply chain requirements to ensure interoperability and logistical readiness. The procurement is structured as a subcontract under NAICS code 332721, indicating the work falls within the manufacturing of other fabricated metal products. Performance is designated for Robins Air Force Base, Georgia, with a delivery address of 31098-1887, underscoring the operational context and destination for the delivered items. The solicitation was posted on August 10, 2026, and responses are due by August 18, 2026, with the contracting entity identified as the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The contract is accessible through the DIBBS system via the provided link, ensuring transparency and compliance with federal procurement protocols.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Self-Locking Nuts (Hexagon, Extended Washer)The contract pertains to the manufacture or domestic supply of NSN 5310006770659 self-locking hexagon nuts with extended washer, specifically tailored to meet Defense Supply Center Philadelphia’s technical and quality requirements under Department of Defense sourcing protocols. The items must adhere to rigorous defense standards for performance, durability, and material composition, ensuring compatibility with military equipment and systems. Delivery is required to Tinker Air Force Base with a zip code of 73145-8000, indicating the primary location for performance and distribution. The NAICS code 332721 confirms the classification as a forging and stamping operation, pointing to the need for specialized metalworking capabilities. The contract is structured as a subcontract, meaning the prime contractor will likely manage the fulfillment through authorized tiered suppliers. The solicitation was posted on August 10, 2026, with a response deadline of August 18, 2026, creating a tight eight-day window for qualified manufacturers to submit proposals. While no set-aside type is specified, the inclusion of the Department of Defense under the agency name ensures compliance with federal acquisition regulations and domestic sourcing preferences. The offering is accessible via the DIBBS procurement portal, suggesting it targets vetted defense contractors with proven experience supplying fasteners under stringent military specifications. Participation requires full alignment with quality control measures, traceability provisions, and potential inspection protocols to validate conformance prior to acceptance.

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Metal Pin Manufacturing (Straight Pins, Headed and Headless)The contract solicits the manufacture of precision straight pins, both headed and headless, to meet strict military specifications covering material composition, dimensional tolerances, surface finish, and packaging requirements. All components must adhere to defined quality standards ensuring consistency, durability, and performance under operational conditions. The work is classified as a subcontract under NAICS code 332721, indicating fabrication of mechanical power transmission equipment and related precision metal products. The solicitation was posted on August 10, 2026, with responses due by August 18, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Performance will occur at an unspecified location, and interested parties must submit proposals through the DIBBS portal by the deadline to be considered.

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Fastener Supply – PIN RIVET (NSN: 5320017140189)

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Helical Coil Retainer Manufacturing & Supply

LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Friction Catch Stud Supply and DeliveryThe contract calls for the supply and delivery of friction catch studs identified by NSN codes, requiring precision manufacturing or sourcing to meet stringent federal and military specifications. All items must comply with approved standards for packaging, marking, and shipment to ensure readiness and traceability within government logistics systems. The work is designated as a subcontract under NAICS code 332721, which pertains to forging and stamping operations, indicating the need for specialized metalforming capabilities. Performance is required at Tinker Air Force Base with a zip code of 73145-9031, underscoring the military operational context. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and is managed by the Department of Defense through the Land Supply Chain organization, reflecting its importance within defense supply infrastructure.

LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Precision Manufacturing of Threaded Standoff Spacers

LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Hazardous Materials Compliance and SDS ManagementThe contract requires full compliance with hazardous substance restrictions and mandates the preparation, submission, and ongoing maintenance of Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and applicable federal regulations. The work involves ensuring all materials meet stringent chemical safety standards and that SDS documentation remains accurate, current, and accessible to support regulatory adherence and workplace safety. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, specifically targeting small businesses as defined by FAR 19.5, with the NAICS code 541690 indicating it falls under other scientific and technical consulting services. Performance of the work is centered in San Diego, California, with the contracting agency being the Fluid Handling Division of the Department of Defense. Responses must be submitted by August 21, 2026, and the solicitation was posted on August 10, 2026, offering qualified small businesses an opportunity to support critical defense-related hazardous materials compliance efforts.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

Specialized Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and marking services for hose units in strict compliance with MIL-STD-129 and MIL-STD-2073-1E standards, ensuring all components meet military-grade requirements for shipment readiness. This includes accurate shelf-life date marking, physical identification using the RQ017 code, and proper palletization to safeguard integrity during transport and storage. All work must be performed with precision to maintain traceability, durability, and regulatory adherence throughout the supply chain. This is a Total Small Business Set-Aside subcontract under NAICS code 323113, exclusively available to small businesses as defined by the SBA. The opportunity is issued by the Department of Defense’s Fluid Handling Division with performance required in San Diego, California, 92136-3581. Proposals must be submitted by August 21, 2026, and are accessible through the DIBBS portal. The solicitation does not list a specific point of contact or agency office address, and no funding details are provided beyond the compliance and performance expectations.

Commercial Screen Printing

POSTED

about 7 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance of first article testing on nonmetallic hose components to ensure full compliance with applicable military standards, including rigorous documentation of all test procedures and results. The work involves detailed verification of material properties, dimensional accuracy, pressure performance, and environmental resilience as mandated by defense specifications, with all findings reported in a format approved by the Government Quality Assurance Representative. Close coordination with the QAR is essential throughout the testing phase to ensure transparency, address any nonconformances promptly, and obtain formal acceptance prior to proceeding with production. This is a total small business set-aside subcontract under NAICS code 541380, intended exclusively for small businesses as defined by the SBA. The opportunity is managed by the Fluid Handling Division within the Department of Defense, with all work to be performed at a site in San Diego, California, specifically at the ZIP code 92136-3581. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026, with the contract to be awarded through the DIBBS platform. Failure to meet the technical requirements or timelines may result in disqualification, and all parties must adhere to federal acquisition guidelines for subcontractor performance and reporting.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Hose Manufacturing and SupplyThe contract requires the manufacture and delivery of 175 units of nonmetallic hose with a 7-inch inner diameter and 35-foot length, fully compliant with military specifications. All units must undergo first article testing to verify conformance to technical requirements, and material composition must meet established standards for performance and durability. Proper packaging and marking are mandatory to ensure traceability, handling safety, and readiness for military logistics systems. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under Other Miscellaneous Fabrication. Performance is required at a specified location in San Diego, California, with a delivery schedule tied to the broader timeline of the Department of Defense’s Fluid Handling Division. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026, providing a 11-day window for interested small businesses to submit proposals. The contract is managed by the Department of Defense’s Fluid Handling Division, which oversees procurement for specialized fluid transport systems critical to military operations. While no point of contact is listed, all inquiries and submissions must be processed through the DIBBS platform using the provided link to ensure eligibility and timely consideration. Compliance with all technical, administrative, and small business certification requirements is essential to qualify for award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

DFARS Cybersecurity and Information SafeguardingThis contract requires the implementation of NIST SP 800-171 security controls to protect Covered Defense Information and ensure compliance with DFARS 252.204-7012, which mandates safeguarding measures for sensitive data handled under Department of Defense contracts. The contractor must establish and maintain a robust cybersecurity framework that includes access control, audit and accountability, configuration management, and incident response capabilities, all aligned with the NIST standard. Additionally, the contractor is obligated to promptly report any cybersecurity incidents involving CDI in accordance with DFARS requirements and to position themselves for future CMMC certification readiness, demonstrating a proactive approach to evolving defense cybersecurity standards. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with a compliance deadline for submission by August 21, 2026. The contract is classified as a subcontract under NAICS code 541512, indicating it relates to computer systems design services. The solicitation is issued by the Fluid Handling Division of the Department of Defense, which expects the contractor to meet all federal cybersecurity obligations without reliance on external set-aside provisions, and to maintain documentation and practices that support verification during audits or assessments, underscoring the critical nature of continuous compliance and operational security in supporting national defense systems.

Computer Systems Design Services

POSTED

about 7 hours ago

DEADLINE

Shelf-Life and Packaging Compliance ServicesThe contract requires full compliance with MIL-STD-2073-1E for packaging standards, ensuring all items are properly packed to maintain integrity during storage and transport. It mandates the inclusion of shelf-life markings in accordance with MIL-STD-129, specifically section 5.10.1, which requires accurate labeling of cure and expiration dates to ensure product usability and safety over time. All documentation and labeling must be fully integrated into the packaging process to guarantee traceability and regulatory adherence. The work is classified as a subcontract under NAICS code 541690, tied to the Fluid Handling Division of the Department of Defense with performance location in New Cumberland, Pennsylvania, zip code 17070-5002. Responses are due by August 21, 2026, following a posted date of August 10, 2026.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

Hazard Communication and Safety Data ComplianceThe contract requires the preparation and submission of Material Safety Data Sheets and hazard warning labels that adhere strictly to OSHA 29 CFR 1910.1200 and MIL-STD-129 standards, ensuring full compliance with federal safety and labeling regulations for hazardous materials. Special attention must be paid to the prohibition of ozone-depleting chemicals, and all documentation must reflect accurate, current, and complete hazard communication information as mandated by these directives. The work is to be performed in support of the Department of Defense’s Fluid Handling Division, with the place of performance located in New Cumberland, Pennsylvania, at ZIP code 17070-5002. The contract is classified as a subcontract under NAICS code 541690, and the response deadline is August 21, 2026, with the solicitation posted on August 10, 2026. All deliverables must meet the technical and regulatory requirements without exception to ensure operational and environmental compliance.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

First Article Testing (FAT) and Certification ServicesThe contract is for independent testing and certification of an initial production unit to ensure compliance with Military Performance Specification MIL-PRF-32107/3, Quality Assurance Plan QAP 16236, and specific shelf-life marking requirements. The work involves verifying that the product meets all technical and regulatory standards through rigorous evaluation and documentation, with all test results and reports submitted in accordance with Federal Acquisition Regulation clauses. The deliverables centers on formal certification and submission of comprehensive test reports to confirm adherence to military and quality standards. This is a subcontract under the Department of Defense’s Fluid Handling Division, with a place of performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation, identified under NAICS code 541380, is open for responses through August 21, 2026, with proposals due by 5:00 PM Eastern Time. The contract is not set aside for any specific small business category, and all interested parties must submit their offers through the DIBBS portal using the provided link before the deadline.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

Manufacture of MIL-PRF-32107/3 Compliant Air Duct HoseThe contract requires the manufacture of an air duct hose designated by NSN 4720016504958, fully compliant with the military specification MIL-PRF-32107/3, specifically meeting Type I (Code S) requirements. The product must be fabricated using approved materials, subjected to rigorous testing protocols to ensure performance and durability, and packaged in accordance with defense standards to preserve integrity during storage and transport. A strict 60-month non-extendable shelf life is mandated, requiring precise material selection and manufacturing processes that ensure long-term reliability without degradation. The hose is intended for use in military fluid handling systems where operational readiness and environmental resilience are critical. This is a subcontract solicitation issued by the Fluid Handling Division of the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026. The North American Industry Classification System code 326220 indicates the work falls under rubber product manufacturing, underscoring the specialized nature of the production process. All work must adhere to federal defense supply chain protocols, and adherence to specification requirements is non-negotiable, with failures potentially leading to rejection of delivered items and loss of contract eligibility.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 7 hours ago

DEADLINE

Small Business Subcontracting Support (Accelerated Payments)The contract titled Small Business Subcontracting Support Accelerated Payments requires comprehensive administrative and financial services to ensure full compliance with FAR 52.232-40, specifically focusing on the timely and accelerated payment of small business subcontractors. This involves managing payment workflows, coordinating with government payment systems, and implementing processes that reduce delays and enhance cash flow for qualified subcontractors. The goal is to streamline financial operations while maintaining strict adherence to federal regulations designed to support small business participation in defense contracting. The work is associated with the Fluid Handling Division under the Department of Defense and will be performed at a location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 10, 2026, with a response deadline of August 21, 2026, indicating a tight turnaround for interested parties. The NAICS code 541211 identifies the primary scope as accounting, bookkeeping, and financial reporting services, underscoring the administrative and procedural nature of the support required. This opportunity is categorized as a subcontract and does not specify a set-aside type, meaning it is open to all qualified respondents regardless of business size, though the core objective centers on enhancing small business payment compliance.

Offices of Certified Public Accountants

POSTED

about 7 hours ago

DEADLINE

Domestic and Ocean Transportation via U.S.-Flag VesselsThe contract involves the domestic and ocean transportation of supplies using U.S.-flag vessels in full compliance with cargo preference laws, ensuring that American-owned and operated ships are utilized for moving government freight. This subcontract requires strict adherence to regulatory standards governing maritime cargo routing and emphasizes the integration of shipment data into the Web-based Automated Workflow System to ensure accurate, real-time reporting and tracking of all transport activities. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the primary operational hub for logistics coordination. Issued by the Fluid Handling Division under the Department of Defense, this solicitation falls under NAICS code 483111, which classifies it as water transportation of freight and cargo. The opportunity is open for response until August 21, 2026, with the posting date set for August 10, 2026. While no specific set-aside status is indicated, the requirement for U.S.-flag vessels inherently supports domestic maritime industry goals. The contract’s success hinges on seamless system integration with WAWF, precise documentation, and the ability to meet stringent federal transportation mandates through certified U.S.-owned shipping providers.

Deep Sea Freight Transportation

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires the safe management of hazardous substances used in manufacturing and cleaning operations, with strict adherence to safe handling, accurate labeling, proper packaging, and complete documentation procedures. It mandates full compliance with the Globally Harmonized System of Classification and Labelling of Chemicals and includes the systematic management of Safety Data Sheets to ensure regulatory and operational safety standards are consistently met. All activities must be performed in accordance with established protocols to minimize risk and maintain environmental and personnel safety. This is a subcontract under the NAICS code 562910, issued by the FLUID HANDLING DIVISION of the Department of Defense, with a place of performance located in NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026. The contract does not specify a set-aside type or organization type, and no point of contact details are provided in the data. Interested parties must submit proposals through the designated DIBBS portal using the provided UI link prior to the deadline.

Remediation Services

POSTED

about 7 hours ago

DEADLINE