Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Radioactive Materials Handling and Marking

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Radioactive Materials Handling and Marking requires the identification, measurement, and precise labeling of items that contain radioactive materials exceeding established regulatory thresholds, with strict adherence to military marking standards and all applicable subcontract flow-down requirements. Work must be performed at the specified place of performance in Cherry Point, North Carolina, with all activities designed to ensure full compliance with federal and defense-specific regulations governing hazardous materials handling and signage. The solicitation is issued as a subcontract under NAICS code 541620, associated with the Department of Defense through the DLA Fleet Readiness Center DLA PSC, and responses are due by August 6, 2026, with the opportunity posted on July 29, 2026. Participants must be prepared to demonstrate technical capability, regulatory knowledge, and proven experience in handling radioactive substances in a military context, with all deliverables subject to verification against authorized military and safety protocols.

General Info

Handle, measure, and label radioactive materials at Cherry Point per military and federal safety standards by August 6, 2026.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identify, measure, and label items containing radioactive materials exceeding regulatory thresholds, ensuring compliance with military marking standards and subcontract flow-downs.

Similar Contracts

Same NAICS industry code

Forestry and Parks - Request for Proposal - Water & Wastewater Systems Professional Consulting Services - Provincial Water and Wastewater Regulatory Requirements Throughout the Province

Solicitation # AB-2026-05394

Alberta Parks is seeking qualified consultants to conduct a comprehensive province-wide assessment of its potable water and wastewater systems to ensure full compliance with provincial regulatory requirements under the Environmental Protection and Enhancement Act, the Water Act, Public Health Act drinking-water standards, and other directives from Alberta Environment and Protected Areas. These systems, used across seasonal and year-round recreational facilities, vary widely in size, configuration, and operational cycles, leading to inconsistent monitoring, reporting, and compliance tracking due to differing regional practices and high seasonal staff turnover. The absence of standardized processes has hindered Alberta Parks’ ability to reliably verify compliance, detect gaps, and implement consistent improvements across regions. To resolve this, the project will identify all regulatory obligations for each facility, evaluate current adherence, and provide actionable recommendations to close compliance gaps. The outcome will include a standardized Regulatory Compliance Key Performance Indicator Matrix and a centralized annual dashboard to visually display regional performance, enabling assured, annual confirmation that all water and wastewater compliance obligations are consistently met across the province. The solicitation, AB-2026-05394, is open for proposals until August 31, 2026, with Shaun Polley, Project Manager, serving as the primary point of contact.

Forestry and Parks

POSTED

DEADLINE

in about 1 month

Stormwater Drainage Inspection and AssessmentThe contract involves the comprehensive inspection and assessment of stormwater drainage systems to ensure proper functionality and long-term reliability. Contractors are required to perform both visual and structural evaluations, utilizing advanced technologies such as CCTV and sonar to detect blockages, signs of deterioration, and design flaws within the drainage infrastructure. These inspections are critical for identifying issues that could lead to flooding, erosion, or system failure, and must be executed with precision to support maintenance and repair planning. This subcontract is issued by the Georgia Department of Transportation with a solicitation response deadline of August 25, 2026, and falls under NAICS code 541620, which corresponds to environmental consulting services. The work is expected to be performed across various locations within Georgia, though specific sites are not detailed in the provided data. The contract is open to qualified subcontractors capable of delivering technical inspection services, with no set-aside provisions indicated. All proposals must be submitted by the stated deadline through the official portal linked in the contract posting.

Department of Transportation

POSTED

DEADLINE

Airport Master Planning & Environmental ComplianceThe contract seeks qualified firms to develop comprehensive airport master plans, including airport layout plans, environmental assessments, noise compatibility studies, and land use planning initiatives, all in support of airport development and regulatory compliance. The scope of work requires detailed technical expertise to ensure alignment with federal and state aviation standards, public safety requirements, and environmental regulations, with deliverables designed to facilitate long-term infrastructure planning and community integration. All tasks must be executed with precision to support the Georgia-based Early County Government’s objectives for sustainable aviation growth and environmental stewardship. Subcontractors must submit proposals by August 28, 2026, under a solicitation linked to the Georgia Department of Administrative Services’ procurement system. The contract is classified under NAICS code 541620 for environmental consulting services and is structured as a subcontract, indicating it will be awarded to a firm working under a prime contractor or larger project framework. While specific location details are not provided, performance is expected to focus on airport facilities within Early County, Georgia, requiring on-site analysis, stakeholder coordination, and adherence to regional planning priorities. The procurement is managed through the state’s official government procurement portal, and interested parties must ensure full compliance with submission guidelines and deadlines to be considered.

Early County Government

POSTED

DEADLINE

Environmental Compliance and Site Inspection SupportThe contract involves providing pre-demolition environmental screening and compliance support for public infrastructure projects within regulated right-of-way areas, with specific focus on asbestos assessment and stormwater management controls. This work is critical to ensure regulatory adherence before any demolition activities commence, safeguarding public health and environmental integrity by identifying hazardous materials and implementing proper containment and runoff prevention measures. The services required are technical and compliance-oriented, falling under NAICS code 541620, which covers environmental consulting services. The opportunity is structured as a subcontract under the Georgia Department of Transportation, with a response deadline of August 7, 2026, and was posted on July 29, 2026. While specific performance locations are not detailed in the data, the work is expected to take place across state-managed infrastructure sites within Georgia. The procurement does not specify a set-aside classification, and no point of contact information is provided, requiring interested parties to refer to the official online portal for further details and submission requirements.

Department of Transportation

POSTED

DEADLINE

Recovered Materials Procurement SupportThe contract titled Recovered Materials Procurement Support requires the provision of advisory services and operational support to ensure the procurement of recovered materials complies with Environmental Protection Agency regulations and Resource Conservation and Recovery Act requirements. This subcontract is part of an initiative by the Massachusetts agency COCC1 - Finance & Procurement to align material acquisition practices with federal environmental standards, emphasizing sustainable sourcing and proper handling of recycled content. The work is to be performed at Moody Street in Lowell, Massachusetts, with a deadline for responses set for August 28, 2026, and the solicitation was posted on July 29, 2026. The North American Industry Classification System code 541620 indicates that the services fall under environmental consulting, specifically targeting technical guidance on compliance, documentation, and procurement processes tied to waste and material recovery. The contract does not specify a set-aside status or type, nor does it identify a point of contact or detailed performance metrics, but it implies a need for specialized expertise in navigating federal environmental regulations within procurement workflows. Contractors are expected to have experience in regulatory adherence for recovered materials, including tracking, reporting, and validation under RCRA, and must deliver services that integrate seamlessly with the agency’s broader sustainability and fiscal oversight objectives. The absence of a solicitation number and organizational details suggests a streamlined internal or state-led procurement process, with the primary focus on legal and operational compliance rather than competitive bidding parameters.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Energy Efficiency Compliance ServicesThe contract requires adherence to state-mandated energy conservation standards as defined by federal and Massachusetts regulations, ensuring all materials and equipment supplied or installed meet the required efficiency criteria. Work is to be performed at Moody Street in Lowell, with a strict deadline for response submission on August 28, 2026, and the contract is structured as a subcontract under NAICS Code 541620, indicating professional, scientific, and technical services related to energy efficiency compliance. The contracting entity is the Massachusetts Finance & Procurement division, underscoring the public sector nature of the obligation and the necessity for strict regulatory alignment. There is no set-aside designation specified, and the place of performance is localized to a specific address in Lowell, requiring on-site coordination and verification of compliance.

COCC1 - Finance & Procurement

POSTED

DEADLINE

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation is a subcontract issued by the San Diego Unified School District under NAICS code 541620, targeting services related to the assessment, monitoring, and mitigation of environmental impacts tied to construction activities or site operations within San Diego, California, specifically in the 92124 ZIP code area. The solicitation was posted on July 29, 2026, with a firm response deadline of August 20, 2026, requiring proposers to demonstrate technical capability in identifying environmental risks, implementing regulatory compliance protocols, and executing remediation measures in alignment with applicable state and federal standards. The performance location is fixed at the designated site in San Diego, and while details on set-aside status or point of contact are not provided, the scope requires specialized environmental consulting services to support safe and lawful development activities under the district’s authority.

San Diego Unified School District

POSTED

DEADLINE

Environmental Compliance and Monitoring ServicesThe contract is for Environmental Compliance and Monitoring Services through a subcontract under the Imperial Irrigation District in California, specifically focused on the development and implementation of updated dust control and stormwater pollution prevention plans to ensure adherence to regulatory requirements. The scope includes creating comprehensive plans tailored to the site in Calipatria, with ongoing monitoring activities to verify compliance, identify potential environmental impacts, and implement corrective actions as needed. This work is critical to maintaining environmental integrity at the location and aligning with applicable state and federal environmental standards. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is classified under NAICS code 541620 for environmental consulting services. The place of performance is clearly defined as Calipatria, California, with a zip code of 92233, indicating the specific operational area. Although the type of set aside is not specified, the subcontract nature implies participation through a secondary contractor supporting the primary project execution. All deliverables must be completed in alignment with regulatory expectations, maintaining detailed records, and ensuring continuous compliance throughout the project lifecycle.

Imperial Irrigation District

POSTED

DEADLINE

Hazard Communication & Safety Data Sheet (SDS) ComplianceThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets (SDS) for all hazardous materials used in manufacturing or packaging operations, ensuring full compliance with OSHA’s Hazard Communication Standard. All documentation must accurately reflect the identities, hazards, and safety precautions associated with the chemicals involved, and must be formatted and presented in accordance with regulatory requirements to support workplace safety and legal adherence. The scope centers on delivering complete, up-to-date, and verified SDS documentation and corresponding labels that align with current federal safety mandates. This is a subcontract under the NAICS code 541620, issued by the Department of Defense through its LAND SUPPLY CHAIN office, with the place of performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. The contract is not subject to any set-aside classifications, and interested parties must submit their proposals through the DIBBS platform using the provided UI link. Timing and accuracy in delivery are critical, as compliance directly impacts the safe handling and transportation of hazardous materials across defense-related supply chains.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance and Safety DataThe contract requires strict adherence to hazardous materials compliance through the accurate authoring of safety data sheets, proper labeling, and comprehensive documentation in alignment with DFARS and OSHA HAZCOM standards. This subcontract underscores the need for precise and regulatory-compliant handling of hazardous substances within the defense supply chain, ensuring all materials are properly identified, communicated, and managed to protect personnel and meet federal requirements. The work must be executed with attention to detail and full synchronization with current safety protocols to maintain operational integrity and legal compliance. The solicitation, issued under NAICS code 541620 by the Department of Defense's Aviation Supply Chain ESOc Buys, opens for responses on July 29, 2026, with a firm deadline of August 6, 2026. All deliverables must be submitted through the DIBBS platform, and there is no designated set-aside designation or geographic restriction specified. Performance location and point of contact details are not provided, implying flexibility in execution but demanding full regulatory accountability from the subcontractor regardless of operational location.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract requires written notification and comprehensive compliance documentation for any item containing radioactive materials that exceed the thresholds outlined in 10 CFR 71.3. This obligation applies to all deliverables under the subcontract and demands strict adherence to federal regulations governing the handling, labeling, and reporting of radioactive substances. The contractor must ensure that all relevant technical and regulatory information is meticulously documented and submitted timely to demonstrate full alignment with safety and compliance standards. The solicitation is classified under NAICS code 541620 and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. Performance is required at the location in Dickson, Tennessee, with a zip code of 37055-0248. The response deadline is August 10, 2026, and the opportunity was posted on July 29, 2026. While no set-aside designation or point of contact is specified, interested parties must respond through the provided DIBBS portal before the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Radioactive Materials Notification & Labeling ComplianceThe contract requires the assessment of materials for radioactive content to ensure compliance with federal standards, including the mandatory notification of government authorities if any detected levels exceed established thresholds. This obligation applies to all materials under the scope of the agreement, and failure to identify or report such contaminants could result in noncompliance penalties. The contractor must also implement proper labeling of all affected items in strict accordance with MIL-STD-129, ensuring that radioactive or potentially contaminated materials are clearly and accurately marked for safe handling, storage, and transport throughout the supply chain. The work is to be performed at Hill AFB, Utah, and the contract is structured as a subcontract under the Department of Defense with a NAICS code of 541620, indicating it falls under engineering services for scientific and technical consulting. Responses are due by August 6, 2026, with the solicitation posted on July 29, 2026, and the performance location designated as a key military installation requiring stringent safety and regulatory adherence.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

Military Packaging and Labeling ServicesThe contract requires comprehensive packaging, marking, and labeling of delivered components in strict accordance with military standards, with specific emphasis on the application of 2D Data Matrix barcoding and proper palletization to ensure traceability and compliance throughout the supply chain. All work must be performed to meet Department of Defense requirements for durability, identification, and logistics readiness, ensuring components are protected and identifiable from receipt through final deployment. This subcontract, issued by the DLA Fleet Readiness Center DLA PSC under the NAICS code 561910, is open for response until August 6, 2026, with performance expected to occur at Cherry Point, North Carolina, zip code 28533-0021. The solicitation is part of the Defense Logistics Agency’s effort to secure reliable service providers capable of executing precise military packaging processes, though no set-aside designation is specified. Interested parties must submit responses via the designated DIBBS portal by the stated deadline.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract pertains to the classification of shipped materials according to their hazardous properties and the preparation of Safety Data Sheets that comply with OSHA’s 29 CFR 1910.1200(g) and Federal Standard No. 313. This work involves accurately identifying chemical hazards, assigning proper classification codes, and drafting complete, compliant documentation to ensure safe handling, storage, and transport of hazardous substances. The deliverables must adhere strictly to federal regulations to support workplace safety and regulatory compliance across military and defense operations. The contract is issued as a subcontract under NAICS code 541620, which covers scientific and technical consulting services, and is managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC. Performance is required at Cherry Point, North Carolina, with a response deadline of August 6, 2026. The solicitation does not specify a set-aside type or point of contact, and bidders must submit proposals through the DIBBS portal prior to the deadline to be considered for award. Compliance with all regulatory standards and accurate SDS documentation are critical to meeting the obligations of this agreement.

Environmental Consulting Services

POSTED

DEADLINE

Supply of Precision Insert Component (NSN 5325-LL-NCC-3569)The contract requires the procurement or manufacture and delivery of eight precision metal insert components specified under the military National Stock Number 5325-LL-NCC-3569, ensuring full compliance with all relevant defense standards. Each unit must be produced to exacting technical specifications and accompanied by compliant packaging and labeling as mandated by military protocols. The work is classified as a subcontract under NAICS code 332721, indicating it falls within the die and tool making industry, and is solicited by the DLA Fleet Readiness Center DLA PSC, a subordinate of the Department of Defense. Performance is designated for Cherry Point, North Carolina, with a zip code of 28533-0021, and all deliveries must be completed by the response deadline of August 6, 2026. The request was posted on July 29, 2026, providing a nine-day window for qualified vendors to submit proposals through the DIBBS platform.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Supplier of Regulated Industrial MaterialsThe contract seeks a supplier to provide raw or finished industrial materials such as metals, plastics, and coatings that comply with strict military and Defense Logistics Agency technical specifications, requiring full traceability and certified documentation for every shipment. The materials must meet rigorous quality and compliance standards to support defense operations, with an emphasis on accountability and adherence to regulated supply chain protocols. The opportunity is designated as a subcontract under NAICS code 325199, issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, under the zip code 28533-0021. Responses are due by August 6, 2026, and the solicitation is accessible online through the DIBBS platform, indicating it is part of a formal procurement process for critical defense-industrial components.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

Compliant Shipping and Transportation of Regulated GoodsThe contract requires the arrangement of ocean and domestic freight shipments for regulated materials, with strict adherence to U.S.-flag vessel requirements and documentation standards set by the Defense Logistics Agency. All transportation activities must comply with federal regulations governing the movement of controlled goods, ensuring proper handling, tracking, and recordkeeping throughout the supply chain. The primary place of performance is Cherry Point, North Carolina, with operations likely involving coordination across multiple ports and logistics hubs to support Department of Defense readiness objectives. This is a subcontract under NAICS code 488510, which pertains to freight transportation arrangement, and is issued by the DLA Fleet Readiness Center under the Department of Defense. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026. While specific payment terms and performance metrics are not detailed here, full compliance with DLA documentation protocols and the use of U.S.-籍 vessels are mandatory, making vendor experience in defense logistics and regulatory expertise critical for qualification. The contract is accessible via the DIBBS platform under solicitation number SPEFA526T0963.

Freight Transportation Arrangement

POSTED

DEADLINE

Metal Certification and Quality Assurance TestingThe contract requires the performance of comprehensive quality testing and the provision of metal certifications, including mill test reports, in strict compliance with military and industry standards such as SAE AMS-QQ-A-200/11A and MIL-STD-1916. The work involves verifying material composition, mechanical properties, and conformance to specified technical requirements to ensure suitability for defense-related applications. All testing and certification deliverables must meet the rigorous benchmarks set by these standards to guarantee the integrity and reliability of metal components used in critical systems. This is a subcontract opportunity under NAICS code 541380, issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, ZIP 28533-0021. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026. The contract is not subject to a specific set-aside designation, and interested parties must respond through the designated DIBBS platform prior to the deadline to be considered for award.

Testing Laboratories and Services

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, hazard warning labels, and Safety Data Sheets for hazardous materials, ensuring full adherence to federal and military regulatory standards. All deliverables must meet rigorous safety and documentation requirements to support secure handling, transportation, and use of hazardous substances within defense operations. The work is tied to a subcontract under the Department of Defense, specifically managed by the DLA Fleet Readiness Center DLA PSC, with performance focused at Cherry Point, North Carolina, 28533-0021. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026, under NAICS code 326199, which corresponds to other plastics product manufacturing. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting the stringent compliance criteria for hazardous material documentation and labeling. Participants must ensure all materials and labeling conform to Department of Defense and federal hazardous materials regulations without exception.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Hazardous Materials Handling and ComplianceThe contract pertains to the handling and compliance of hazardous materials under stringent regulatory frameworks, requiring strict adherence to OSHA and military standards for labeling, documentation, and safe operational procedures. All activities must align with federal safety protocols to ensure the proper management, transport, and storage of hazardous substances within designated facilities. Performance is centered at Cherry Point, North Carolina, with the Department of Defense through its DLA Fleet Readiness Center DLA PSC as the contracting entity, and the work falls under NAICS code 493190 for other support activities for transportation. The contract is structured as a subcontract and requires response by August 6, 2026, with an emphasis on full regulatory compliance as a non-negotiable condition of performance.

Other Warehousing and Storage

POSTED

DEADLINE

Transportation and FOB Destination Freight ServicesThe contract is for transportation and FOB Destination freight services to move manufactured components from their origin to Cherry Point, NC, with the contractor assuming full responsibility for all risks, costs, and logistics until the goods are delivered to the specified destination. Under FOB Destination terms, ownership and liability remain with the transporter until the load arrives at the final delivery point, meaning the contractor must cover any damage, loss, or delay during transit. The NAICS code 484121 identifies this as a contract for truck transportation of freight, specifically focused on less-than-truckload and truckload services within the general freight moving industry. The solicitation, issued by the Department of Defense through the DLA Fleet Readiness Center, has a response deadline of August 6, 2026, and the place of performance is clearly defined as Cherry Point, NC, with the zip code 28533-0021. This is designated as a subcontract opportunity, indicating it is part of a larger procurement effort under a prime contract, with no set-aside classification specified and no point of contact details provided.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires specialized packaging, preservation, and labeling services for military aircraft components, ensuring full compliance with defense standards. This includes the use of desiccants to control moisture, vapor corrosion inhibitors to prevent metal degradation, and Data Matrix barcoding for precise identification and tracking throughout the supply chain. All work must adhere to stringent military specifications to guarantee component integrity during storage and transportation. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, zip code 28533-0021. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026. The NAICS code 561910 indicates the scope falls under other support activities for transportation, reflecting the specialized logistics and preservation nature of the work. No set-aside categorization has been specified, and the contract is open for bidding under the subcontract classification.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Manufacturing of Critical Aircraft ComponentBell Textron Inc. is seeking a subcontractor to manufacture and deliver three units of part number 1560-LL-NCB-5916, a high-stakes component used in critical aircraft applications that must meet exacting military technical and quality specifications. The work is part of a defense procurement effort managed by the Department of Defense through the DLA Fleet Readiness Center, with all production and delivery required to occur at the designated place of performance in Cherry Point, North Carolina, zip code 28533-0021. The solicitation, under NAICS code 336412 for aircraft parts and accessories manufacturing, is open for responses until August 6, 2026, with proposals due by 5:00 PM Eastern Time. This subcontract opportunity is intended for qualified suppliers capable of handling mission-critical aerospace components under stringent defense standards, with no set-aside provisions specified, meaning open competition is allowed for eligible contractors.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

EXTRUSION 40-168-1 707

Solicitation # SPEFA5-26-T-0963

The contract specifies the procurement of an extrusion part numbered 40-168-1, manufactured from 7075-T6 aluminum alloy conforming to the AMS QQ-A-200/11 Revision A standard, with a total length of 144 inches. The material must be packaged to prevent damage during shipment in compliance with ASTM D3951 and MIL-STD-129 labeling requirements, with packaging adhering to DLA’s RP001 packaging standards, which take precedence over ASTM. A Certificate of Quality Conformance is mandatory, and the material is subject to zero-defect acceptance sampling under MIL-STD-1916 or ASQ H1331 Table 1, with unspecified attributes treated as major and requiring zero non-conformances in the sample lot. Physical identification and marking must follow RQ017 requirements, and metal certification data must be provided via CDRL-METALSCERT, referenced in the Technical Data Package. The NSN is 9540-LL-NCP-A648, with a quantity of 288 inches ordered under purchase request 7017674640, delivered FOB destination within 55 days, with a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at the delivery point, and the material has no shelf life limitation. The contract is issued under SPEFA5-26-T-0963 with a required delivery date of October 24, 2026, and the shipment must be sent to the specified FOB destination at Cherry Point, North Carolina, using the provided freight and parcel post addresses.

Other Support Activities for Air Transportation

POSTED

DEADLINE