Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Structural Concrete Work

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the provision of formwork, reinforcement, and pouring of structural concrete for foundations, walls, and slabs as part of a subcontract under the NAICS code 238110. The work is to be performed at a location with a zip code of 84041 and is solicited by the Department of Defense under the organizational designation FA8214 Afnwc Pzbb. The opportunity was posted on July 7, 2026, with a response deadline of January 5, 2027, allowing interested parties sufficient time to prepare and submit their proposals. This subcontract is intended for specialized concrete construction services critical to structural integrity and must be executed in compliance with applicable technical and safety standards associated with defense-related infrastructure projects.

General Info

Concrete construction for DoD infrastructure in 84041, due Jan 5, 2027, under NAICS 238110.

Agency

Department Of Defense → FA8214 Afnwc PzbbView Agency

NAICS

238110 - Poured Concrete Foundation and Structure ContractorsView NAICS

Place of Performance

UT, 84041, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8214 Afnwc Pzbb
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA8214 Afnwc Pzbb
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Formwork, reinforcement, and pouring of structural concrete for foundations, walls, and slabs.

Similar Contracts

Same NAICS industry code

NAICS: 238110
New
SLED
Biffy Facility ImprovementsThe contract involves the construction of a new non-combustible, explosion-proof structure equipped with interior and exterior lighting, ventilation, space heating for freeze protection, fire extinguishers, and surveillance cameras, all designed to provide safe access to critical equipment. The facility will be built to meet sanitisation standards per NFPA 820 and FDA guidelines, ensuring compliance with health and safety regulations. A redundant pump system with a duplicate backup pump and a biffy tank will be installed to guarantee continuous operation during pump failure, alongside backflow prevention measures. Emergency safety features including an eyewash station and emergency shower with tempered water will be included to protect personnel. The project also encompasses comprehensive upgrades to the facility’s electrical and mechanical infrastructure, including the installation of channel drains and enhanced wet well cleaning systems. All components will be integrated to ensure operational reliability and safety in a high-risk environment. The work is being managed by the Aviation Project Management Group under the Port of Seattle, with Jay Kim as the primary point of contact and Rishiraj Savita serving as the project manager for the contractor. The forecast notice was posted on July 26, 2026, indicating the intent to procure services classified under NAICS code 238110 for construction activities.
Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → FA8214 Afnwc Pzbb

Same awarding agency

NAICS: 336419
Federal
Flight Test, Telemetry and Termination (FT3) Flight Test Kit ProductionThe Department of the Air Force, through the Air Force Nuclear Weapons Center at Hill Air Force Base, Utah, is procuring the production and delivery of twenty-five flight test kit replenishment spares for the Flight Test, Telemetry, and Termination (FT3) Program under a sole-source contract awarded to The Boeing Company, identified by CAGE code 0B0D7. This procurement supports the Air Force Global Strike Command’s Minuteman III Intercontinental Ballistic Missile Force Development Evaluation Operational Test Launch Program and is justified under 10 U.S.C. 3204(a)(1) and RFO 6.103-1, as Boeing is the only source capable of meeting the government's technical, schedule, and infrastructure requirements without causing unacceptable delays or incurring a minimum of $80 million in redundant costs. The contract is structured as a Firm-Fixed-Price vehicle with a period of performance spanning October 2027 through September 2035, encompassing baseline production through September 2034 and extending to September 2035 for final delivery obligations. The total estimated program value is approximately $955 million, inclusive of potential future procurements authorized under a Class Justification and Approval. Deliveries are required to be made just-in-time to Vandenberg Space Force Base, California, precisely 120 calendar days prior to scheduled launch events, with an allowable window extending no later than 90 days prior, and all kits must be stored at Boeing’s facility in Layton, Utah, until shipment. Production must strictly adhere to FT3-approved technical data, specifications, and drawings, with all components manufactured and assembled in compliance with stringent military standards including MIL-STD-130 for identification marking, MIL-STD-129 for shipment labeling, and MIL-STD-2073-1 for packaging—specifically using Method 54 for FDS assemblies and ESAD components, which require fiberboard containers within wooden crates. Electrostatic discharge sensitive items must be handled per MIL-STD-1686, Class 2, and hazardous materials must be managed according to OSHA 29 CFR 1910.1200. Each kit undergoes initial acceptance testing at Boeing’s Heath, Ohio facility and final certification at Vandenberg, where I-LAB personnel validate the Post Boost Vehicle electronics and cabling against the latest tailored revisions of RCC 319-14(T), RCC
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

19 days ago

DEADLINE

in 5 months
View Details