Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Lacing and Tying Tape (NSN 4020-01-659-5502)

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture or supply of lacing and tying tape in accordance with military specifications and the DLA Master List, specifically under NSN 4020-01-659-5502. All materials must meet stringent quality and material safety standards required by defense procurement protocols, ensuring durability, performance, and compliance in military applications. The requirement is set aside exclusively for Women-Owned Small Businesses, with the NAICS code 314994 indicating classification under Other Miscellaneous Textile Product Mills. The place of performance is designated as Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, and all deliverables must be fulfilled to support defense logistics operations originating from this location. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, with the procurement structured as a subcontract under the Department of Defense’s Construction & Equipment Manu & Con organization.

General Info

Women-Owned Small Business contract for military-grade lacing tape to Tinker AFB, due August 10, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric MillsView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture or supply of lacing and tying tape per military specifications and DLA Master List requirements, including compliance with material safety and quality standards.

Similar Contracts

Same NAICS industry code

Women-Owned Small Business (WOSB) Prime Subcontracting OpportunityA Women-Owned Small Business (WOSB)-certified firm is invited to serve as either a prime contractor or subcontractor to fulfill the full scope of work under a WOSB set-aside provision, ensuring preferential treatment for eligible women-owned businesses. The opportunity is categorized under NAICS code 314994, relating to other textile product mills, and is managed by the Department of Defense through its Construction & Equipment Manu & Con agency. Performance of the contract is required at Tinker AFB, with a zip code of 73145-8000. The solicitation was posted on July 29, 2026, and all responses must be submitted no later than August 10, 2026. This is classified as a subcontracting opportunity, meaning the winning entity will either lead the project as prime or support another prime under the WOSB set-aside framework. Participation is restricted to firms holding valid WOSB certification to comply with federal contracting rules aimed at promoting economic opportunity for women-owned small businesses.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2194

This is a shock cord assembly consisting of elastic cord with an S hook on each end, designated by NSN 4020-01-249-7762, with a quantity of one unit required for delivery within five days of award. The procurement is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is classified as a critical item requiring source inspection, and technical data associated with it is subject to export control under ITAR or EAR, restricting disclosure to foreign persons even within the United States. Access to this controlled data is limited to contractors holding approved US/Canada Joint Certification Program certification, having completed mandatory DOD export control training, and received formal approval from DLA. The solicitation is open through DIBBS with a response deadline of August 10, 2026, and is issued under contract SPE8EE-26-T-2194 by the Department of Defense for use by Sikorsky Aircraft Corporation.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

TAPE, LACING AND TYING

Solicitation # SPE8EE-26-T-2199

This contract is for the procurement of tape, lacing, and tying materials under solicitation SPE8EE-26-T-2199, with a total quantity of 1,247 units of issue (SL), assigned NSN 4020-01-659-5502. Delivery is required within 46 days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and all items must be packaged in compliance with ASTM D3951, while strictly adhering to the more stringent DLA Master List of Technical and Quality Requirements, MIL-STD-129 marking and labeling standards, and DLA packaging requirements. Palletization must conform to RP001 guidelines. The contract includes specific parcel post and freight shipping addresses to DLA Distribution Depot Oklahoma at Tinker AFB, with transportation instructions governed by DLAD PROC NOTE C19 and C20. The delivery deadline is July 29, 2026, and the solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 314994. All technical and quality specifications referenced are controlled by the DLA Master List version effective on the solicitation issue date, and any application of covered defense information must be handled per RD003 guidelines. The point of contact is Philip Ferrara, reachable via email and phone as listed.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

FIBER ROPE ASSEMBLY, SI

Solicitation # SPE8EE-26-T-2201

The contract is for the procurement of 180 units of a fiber rope assembly, single leg, identified by NSN 4020-01-337-3185, under purchase request 7017585757. The requirement is part of a solicitation issued by the Department of Defense through the Defense Logistics Agency, with the solicitation number SPE8EE-26-T-2201 and a response deadline of August 10, 2026. The solicitation is set aside for Women-Owned Small Businesses and falls under NAICS code 314994. Delivery is due 227 days after award, with the place of performance located in Tracy, California, 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Government identification must be removed from non-accepted supplies, and covered defense information provisions may apply. The primary point of contact is Philip Ferrara, reachable via email and phone provided.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-Q-0411

The contract specifies the procurement of 78 units of ROPE, FIBROUS with NSN 4020-01-723-6030 under solicitation SPE8EE-26-Q-0411, designated as a Total Small Business Set-Aside. Delivery is required within 125 days after order placement, with FOB origin and inspection and acceptance occurring at the destination. All items must be packaged in compliance with ASTM D3951, but must adhere to the more stringent requirements of the DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Palletization must follow RP001: DLA Packaging Requirements for Procurement, and the Unit of Issue and Quantity per Unit Pack must strictly match the contract specifications. Cybersecurity requirements mandate CMMC Level 2 Self-Assessment compliance, and any covered defense information must be handled in accordance with applicable safeguards. The supplies must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, using designated transportation protocols outlined in DLAD Proc Notes C19 and C20. The contract includes zero tolerance for quantity variance, and all packaging must remove government identification from non-accepted supplies. The drawing referenced, IAW BASIC DRAWING NR 0MLM6 7021409 Revision D dated 06/03/2024, is available during the open solicitation period via the DIBBS portal.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2197

The contract pertains to the procurement of fibrous rope, identified by NSN 4020-01-641-4882, with a total quantity of seven standard lengths, each equaling 600 feet, for a total of 4,200 feet of material. The order is tied to Purchase Request 7017674750 and requires delivery within 72 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Compliance with federal regulations, particularly 46 CFR 164.018, is mandated for reflective tape applications, specifying minimum surface area requirements for front and back placements to ensure visibility and durability, with Solas tape preferred for its superior brightness and water resistance. Additional construction requirements include specific stitching and bar tacking techniques for reinforcement, with layout changes aligned to NAVSEA testing and approval. The solicitation, issued under SPE8EE-26-T-2197 on July 29, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense through its Construction & Equipment Manu & Con organization, with performance based in New Cumberland, Pennsylvania, and primary point of contact Philip Ferrara.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Manila Rope Manufacturing & Supply (Type M, Class 2, 1-1/2" Circumference)The contract calls for the manufacture and supply of 90 coils of mildew-resistant manila rope, each coil measuring 1,200 feet, adhering to the T-T-616B specification for Type M, Class 2, with a 1-1/2 inch circumference. The ropes must meet strict quality and durability standards to resist mildew and maintain structural integrity under demanding conditions. Delivery is required to two locations: San Diego, with a zip code of 92136-3581, and Texarkana, though the exact address in Texarkana is not specified. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns as defined by the SBA are eligible to respond. The NAICS code 314994 identifies the industry as All Other Miscellaneous Textile Product Manufacturing, confirming the specialized nature of the product. The offer response deadline is August 10, 2026, and the request was posted on July 28, 2026, providing a limited window for qualified small businesses to prepare and submit proposals. The contracting agency is the Department of Defense under the office of Construction & Equipment Manu & Con, indicating military or defense-related use for the rope.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2191

The contract specifies the procurement of 90 coils of Manila rope, each 1,200 feet in length, identified by NSN 4020-00-238-7732, with a Type I, Class 2, 1-1/2 inch circumference, standard lay, and mildew-resistant treatment per T-T-616B. The item is classified as a critical item requiring source inspection and has a non-extendable shelf life of 36 months, marked with special code 32. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with pallets constructed from heat-treated wood bearing a visible stamp; failure to comply results in rejection and return at the vendor’s expense. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with zero non-conformances required unless otherwise stated. Inspection and acceptance occur at origin, with no quantity variance allowed. Delivery is due within 98 days of contract award, with two separate delivery points: San Diego and Texarkana, each receiving 27 and 63 coils respectively, totalling 90 CL. The contract is a Small Business Set-Aside under NAICS code 314994, issued under solicitation SPE8EE-26-T-2191, with technical and quality requirements governed by the DLA Master List and QAP EQ003. All shipments must adhere to strict marking, packaging, and wood treatment standards as outlined in DLA packaging directives and government technical standards.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

WIRE ROPE ASSEMBLY, SIN

Solicitation # SPE4A5-26-T-311P

The contract specifies the procurement of a single-leg wire rope assembly with part number 453T7332-13 and NSN 4010016552768, for a quantity of two units. The item is not classified as hazardous, eliminating the need for a Safety Data Sheet review, but it is subject to Item Unique Identification (IUID) marking per MIL-STD-130 and the DFARS clause 252.211-7003. It is designated as a critical application item and requires compliance with FAA bare item marking requirements and airworthiness approval. All packaging, preservation, and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item must be delivered FOB origin within 150 days to the designated DLA distribution depot at Tinker Air Force Base, with no variance allowed in quantity. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and configuration changes require formal engineering change proposals. Inspection and sampling follow MIL-STD-1916 or an equivalent zero-based plan, with critical attributes verified at level VII and acceptance requiring zero nonconformances unless otherwise specified. The manufacturer may choose attribute or variable inspection methods unless the contract dictates otherwise. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or amendment date. The contract includes no shelf life restrictions and mandates compliance with DLA packaging standards RP001 and preservation methods outlined in the QUP code. Delivery is due by January 3, 2027, with the original required date of August 13, 2026, and the point of contact is Hien-Van Trinh at the Department of Defense’s ASC Supplier Operations OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

POLYESTER FIBROUS CORD

Solicitation # W8485-279524

The Department of National Defence is procuring 120,000 feet of polyester fibrous cord under solicitation W8485-279524, with delivery required by February 18, 2027, to the 7 Canadian Forces Supply Depot in Edmonton, Alberta. The item, identified by UNSPSC 31152100, NSN 4020-01-593-3517, and part number DCCB-1800-YG, must be supplied in 80 spools of 1,500 feet each, with offering contractors required to clearly state the part number and NSCM/CAGE code for any equivalent or substitute product and provide a certificate of conformance from the original equipment manufacturer. The solicitation operates under a Lowest Price Technically Acceptable (LPTA) evaluation methodology, where all offers must satisfy mandatory technical criteria—including full compliance with specification details, traceability of materials, material condition, and acceptance of all contract terms—before price becomes the determining factor. The contract is fixed-price and non-segmented, with no options, renewals, or additional quantities permitted. Packaging must adhere to Canadian government green procurement policies, requiring reusable, recyclable, or returnable materials, with ISPM 15 compliance for any wood packaging; palletized shipments exceeding 0.566 cubic meters or 15.88 kilograms must use standard pallets with strict dimensional controls and clear labeling. Goods must be delivered FOB Destination, delivered duty paid, with the contractor responsible for all transportation costs, duties, and taxes. Inspection may occur at the supplier’s facility, but formal acceptance takes place at the delivery location, and the contractor remains liable for any non-conforming items even after acceptance. The contractor must maintain ISO 9001:2015 compliant quality systems, provide audit-ready documentation, and comply with ethical standards prohibiting bribes, conflicts of interest, and forced labor. No security clearance is required, and all submissions must be made via CPC Connect, mail, courier, or fax to the designated address by the August 11, 2026 deadline, with proposals required in both technical and financial volumes, along with completed declaration and submission forms. Invoices must include the client reference number and applicable financial codes, though payment processing details and specific invoicing systems are not identified. The Crown reserves the right to negotiate terms with

Department of National Defence

POSTED

DEADLINE

Mooring Lines Oscar Sette and Nancy Foster

Solicitation # 1333MK26Q0103

The National Oceanic and Atmospheric Administration’s Office of Marine and Aviation Operations is soliciting quotes for mooring lines to support the operational readiness of the NOAA Ship Oscar Elton Sette and NOAA Ship Nancy Foster. This is a total small business set-aside under NAICS code 314991 with a size standard of 1,000 employees, and responses must be submitted electronically by 12:00 PM Eastern Daylight Time on August 7, 2026. The requirement includes six units of 1-5/8 inch by 200-foot Amsteel Blue mooring lines with 6-foot covered eyes for the Oscar Elton Sette, each with a minimum break strength of 255,000 pounds, plus twelve 10-foot sections of DC Moor Gard to be installed on each line. For the Nancy Foster, four units each of 1-1/8 inch by 125-foot and 1-1/8 inch by 175-foot Hyper 12 mooring lines with 5-foot eyes and River Guard chafe gear are needed, each with a minimum break strength of 133,000 pounds. All products must be new, meet Buy American requirements, and include verified country of manufacture. Delivery is FOB destination to Honolulu, Hawaii, and Charleston, South Carolina, respectively. Quotes must be submitted as firm fixed price and include detailed technical documentation such as OEM data sheets, authorized distribution letters, descriptive literature, and proof of compliance with all specifications. Offerors must be currently registered in the System for Award Management and submit Page 1 of their SAM registration with their proposal. Additional requirements include liability insurance documentation and at least two references for similar work performed within the past three years. Evaluation will prioritize technical compliance and price, with awards going to the most advantageous offer based on conformity to specifications and lowest cost. Questions must be submitted in writing no later than two days before the deadline, and responses will be distributed via official amendment. Failure to comply with submission format, missing documentation, or late responses will result in non-responsiveness and automatic rejection. The Government will not accept responsibility for non-receipt of quotes, so offerors must confirm delivery via email.

OMAO Field Delegates

POSTED

DEADLINE

WIRE ROPE ASSEMBLY,

Solicitation # SPE4A1-26-T-2494

The contract is for a single wire rope assembly identified by NSN 4010-01-726-2761 under solicitation SPE4A1-26-T-2494, with a delivery requirement of 114 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions based on solicitation or award date depending on acquisition size. The item is subject to tailored higher-level quality requirements, DLA packaging standards, and inspection and acceptance at origin. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Measuring and test equipment must comply with RT001 requirements. Cybersecurity requirements mandate CMMC Level 2 certification, though Item Unique Identification is waived per customer request. Technical data associated with this item is controlled under ITAR or EAR, restricting export and disclosure to foreign persons without prior authorization from the Department of State or Commerce, with DFARS 252.225-7048 applying. Access to controlled data is limited to DLA contractors with JCP certification, completed training, and formal approval. Performance is to occur in New Cumberland, PA, with Ryan Finan listed as the primary point of contact.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Hazardous Materials Compliance & Safety Data SupportThe contract titled Hazardous Materials Compliance & Safety Data Support requires the provision and ongoing maintenance of Material Safety Data Sheets and ensures all hazardous material labeling adheres strictly to OSHA and DLA standards. This subcontract is specifically set aside for Women-Owned Small Businesses and is classified under NAICS code 541690, which covers other scientific and technical consulting services. The work must be performed at Tinker Air Force Base with a zip code of 73145-8000, and proposals must be submitted by August 10, 2026, following a posting date of July 29, 2026. The contract is managed by the Department of Defense under the organization name Construction & Equipment Manu & Con and will be accessed via the DIBBS platform. Compliance with federal safety regulations and accurate documentation of hazardous substances are central to fulfilling this requirement.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires comprehensive packaging, palletization, and labeling services in full compliance with Department of Defense standards, specifically adhering to DLA requirements, RP001 for palletization, and MIL-STD-129 for labeling, including accurate hazardous material markings and ensuring all shipments are fully prepared for immediate transport. The work must be executed to guarantee readiness for military logistics operations, with strict attention to regulatory compliance and operational safety. This subcontract is designated as a Women-Owned Small Business Set-Aside under NAICS code 561910, reserved exclusively for eligible WOSB entities, and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. Performance is required at Tinker Air Force Base, Oklahoma, with a response deadline of August 10, 2026, and the solicitation was posted on July 29, 2026. All proposals must meet the technical and regulatory specifications outlined to be considered for award.

Packaging and Labeling Services

POSTED

DEADLINE

Radioactive Materials Notification (If Applicable)The contract requires written notification and comprehensive compliance documentation for any item containing radioactive materials that exceed the thresholds outlined in 10 CFR 71.3. This obligation applies to all deliverables under the subcontract and demands strict adherence to federal regulations governing the handling, labeling, and reporting of radioactive substances. The contractor must ensure that all relevant technical and regulatory information is meticulously documented and submitted timely to demonstrate full alignment with safety and compliance standards. The solicitation is classified under NAICS code 541620 and is issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. Performance is required at the location in Dickson, Tennessee, with a zip code of 37055-0248. The response deadline is August 10, 2026, and the opportunity was posted on July 29, 2026. While no set-aside designation or point of contact is specified, interested parties must respond through the provided DIBBS portal before the deadline to be considered for award.

Environmental Consulting Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA Hazard Communication standards and DFARS 252.223-7001 for the handling and management of hazardous materials, with specific obligations to generate accurate Safety Data Sheets and apply proper hazard labeling in accordance with regulatory requirements. All activities must align with federal mandates for chemical safety communication, ensuring that personnel and downstream users receive consistent, standardized hazard information. The work is to be performed at a designated location in Dickson, Tennessee, with a zip code of 37055-0248, and is classified under NAICS code 541690 for other scientific and technical consulting services. This is a subcontract opportunity posted by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, with a response deadline of August 10, 2026. No set-aside type is specified, and the solicitation number is SPE8EF26T1526. The contractor must be prepared to meet all documentation, labeling, and procedural requirements tied to hazardous material handling as defined by both occupational safety and defense acquisition regulations. Compliance is mandatory and will be subject to verification throughout the performance period.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

DLA-Compliant Packaging and PalletizationThe contract requires full compliance with U.S. Department of Defense packaging standards for cargo tie-downs, including adherence to MIL-STD-129, ASTM D3951, and RP001 guidelines for packaging, preservation, and palletization. All items must be securely packaged to prevent damage during transit, properly preserved against environmental degradation, and palletized to ensure stability and ease of handling. Each shipment must include accurate barcode labeling for automated tracking and full traceability throughout the supply chain, ensuring end-to-end visibility from manufacturer to end user. The work is to be performed at a designated location in Dickson, Tennessee, with a zip code of 37055-0248. This solicitation is classified as a subcontract under NAICS code 484220, indicating involvement in truck transportation and related logistics services. The opportunity was posted on July 29, 2026, and proposals must be submitted by August 10, 2026. The contracting authority is the Department of Defense under the organization name Construction & Equipment Manu & Con. While no specific set-aside designation is provided, the contract is open to qualified subcontractors capable of meeting stringent military packaging and tracking requirements. Interested parties must access the full solicitation details via the DIBBS portal using the provided link.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Cargo Tie-Down Device ManufacturingThe contract requires the manufacture of ten military-spec cargo tie-down devices identified by NSN 3990-01-412-1518 and Part No. 3100207G019-008, fabricated to meet Defense Logistics Agency standards. Production must adhere to strict military specifications ensuring durability, reliability, and compatibility with existing DoD logistics and transport systems. The work is classified as a subcontract under NAICS code 332999, indicating it falls under other fabricated metal product manufacturing, and is intended for performance at DICKSON, Tennessee with ZIP code 37055-0248. Bids must be submitted by August 10, 2026, with the opportunity posted on July 29, 2026, giving potential vendors approximately three weeks to prepare proposals. The contract is issued under the Department of Defense through the organization Construction & Equipment Manu & Con, with no set-aside designation specified, meaning it is open to all eligible contractors regardless of size or certification. The full solicitation details and submission portal are accessible via the DIBBS platform using the reference number SPE8EF26T1526.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Subcontract opportunity decomposition unavailable due to system outageA subcontract opportunity has been posted with a solicitation number that is currently unavailable due to a system outage, preventing access to detailed contract information or subcontract decomposition. The opportunity was posted on July 29, 2026, with a response deadline of August 10, 2026, and is categorized under a NAICS code of 999999, indicating an unclassified or unspecified procurement type. The contracting organization is listed as the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, with a place of performance specified as New Cumberland, Pennsylvania, zip code 17070-5002. No set-aside information, point of contact, or office address details are available, and the solicitation is accessible only through a link to the DIBBS system where further details may be limited due to the ongoing system interruption.

POSTED

DEADLINE

Beam-Type Sling Supply (NSN: 3940017021064)The contract requires the supply and delivery of four beam-type slings identified by NSN 3940017021064, with all items needing to fully comply with DLA technical specifications, packaging requirements, labeling standards, and documentation protocols. The slings are intended for military use and must meet stringent defense contracting guidelines to ensure interoperability, safety, and traceability throughout the supply chain. The solicitation is issued under a subcontract structure with a NAICS code of 332439, indicating the work involves other fabricated metal product manufacturing, and performance is to take place at Tracy, California, with a zip code of 95304-5000. The opportunity was posted on July 29, 2026, and responses must be submitted by August 10, 2026, leaving a twelve-day window for potential vendors to prepare and submit their proposals. While no solicitation number is provided and the set-aside type is unspecified, the contracting entity is the Department of Defense under the organization Construction & Equipment Manu & Con. All submissions must align with DLA’s procedural and quality controls, and failure to meet any aspect of the technical or administrative requirements could result in disqualification. Vendors should refer to the provided DIBBS link for full details on submission procedures and compliance expectations.

Other Metal Container Manufacturing

POSTED

DEADLINE

SLING, BEAM TYPE

Solicitation # SPE8EE-26-T-2198

The contract solicits four beam-type slings with NSN 3940-01-702-1064 under solicitation number SPE8EE-26-T-2198, with a response deadline of August 10, 2026, and a delivery requirement of 160 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item includes technical data subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign national employees and subsidiaries, even within the United States. Compliance with DFARS 252.225-7048 is mandatory, and contractors must possess a valid US/Canada Joint Certification Program certification, complete mandatory DLA export control training and questionnaire, and receive explicit approval from the DLA controlling authority to access the controlled data. The contracting activity is under the Department of Defense, with performance due at Tracy, California, 95304-5000, and primary point of contact is Philip Ferrara, reachable via phone and email provided.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

PLUG, INLET, HIRSS

Solicitation # SPE8EF-26-T-1527

The contract solicitation SPE8EF-26-T-1527 is for a single unit of a PLUG, INLET, HIRSS, identified by NSN 1730012466758 and part number 70700-20514-042, supplied by Airborne Industries Inc. and Sikorsky Aircraft Corporation. The item is classified as a critical application component for airborne systems and requires strict compliance with国防部 technical and quality standards referenced through the DLA Master List, including configuration change management, source approval, and documentation requirements. The item must be uniquely identified with a compliant IUID marking per MIL-STD-130 and DFARS 252.211-7003, ensuring traceability through the DoD UID Database. Delivery is mandated within 20 days of award with an original required delivery date of August 3, 2026, FOB origin, with final shipment directed to PARQUE DE MATERIAL AERONAUTICO in São Paulo, Brazil. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 requirements, with specific preservation methods classified as climate-controlled dry storage and no preservatives used. Marking must follow MIL-STD-129 with no special markings required, and palletization must conform to DLA guidelines. The contract enforces stringent cybersecurity and safeguarding protocols including NIST SP 800-171 compliance, cyber incident reporting within 72 hours, and prohibition of telecommunications equipment from designated foreign vendors such as Huawei and ZTE. Hazard communication standards under OSHA 29 CFR 1910.1200 apply, and whistleblower protections must be communicated to employees. Sampling is governed by an approved alternate plan from Sikorsky Corporation under ASQ H1331 or MIL-STD-1916. No option quantities or extended pricing are included, and the total contract value is $982.35. All submissions must be made electronically through DIBBS, with no physical proposals accepted, and no deviations from the established delivery, marking, or compliance requirements are permitted without formal approval.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2200

The contract specifies the procurement of a single sheave, 6-inch shell length, galvanized iron or steel block and tackle rated for 3/4 inch diameter fiber rope, identified by NSN 3940009263709 and part number SPE8EE-26-T-2200. The item is classified as a critical application component and must comply with DLA’s technical and quality requirements as listed in the DLA Master List, incorporating standards such as GGG-B-490F Revision A. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in specific equipment like batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with QUP 001, preservative method 10, and marking per MIL-STD-129 with no special marking code. The item must be palletized in accordance with DLA packaging requirements and delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract calls for 14 units with a unit price of $14.00, totaling $196.00, under CLIN 0001 with a 0% quantity variance. Delivery must occur within 132 days from the award date, with the original required delivery date set for April 11, 2027 and a needed ship date of December 21, 2026. Inspection and acceptance occur at the destination. The procurement is governed by the DoD’s authorized unit of issue and falls under NAICS code 332618 for other fabricated metal product manufacturing. The solicitation number is SPE8EE-26-T-2200, issued on July 29, 2026, with responses due by August 10, 2026. The primary point of contact is Philip Ferrara of DLA, and transportation logistics follow DLAD Proc Note C19 for general transport and C20 for first destination. All applicable defense information, quality, and packaging directives are incorporated by reference and must be fully compliant to meet contract obligations.

Other Fabricated Wire Product Manufacturing

POSTED

DEADLINE