Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

System Installation and On-Site Integration

Active

Federal

Response Deadline08/05/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the physical installation and on-site integration of a controller system and associated software at NASA Glenn Research Center, requiring precise system calibration, cabling, and seamless connection to existing infrastructure. Work must be performed in accordance with technical specifications to ensure full operational compatibility and reliability within NASA’s environment, with all tasks completed at the designated facility location. The opportunity is structured as a subcontract under NAICS code 238210 and was posted on July 30, 2026, with a response deadline of August 5, 2026. The contracting activity is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and all work must be completed in compliance with federal standards for government infrastructure projects. No set-aside provisions are specified, and the place of performance is the NASA Glenn Research Center, though specific address details are not provided.

General Info

Install and integrate controller system at NASA Glenn Research Center per federal standards by August 5, 2026.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 01:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Physical installation of the controller and software at NASA Glenn Research Center, including system calibration, cabling, and integration with existing infrastructure.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 22 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 22 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 22 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 22 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 22 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 22 hours ago

DEADLINE

Electrical Installation and Wiring

City of Dunwoody

POSTED

DEADLINE

in about 1 month

Perimeter Security and Intrusion DetectionThe contract titled Perimeter Security and Intrusion Detection involves the supply and installation of a comprehensive security system for the Dekalb County School District in Georgia, including motion sensors, door and window alarms, glass break detectors, and perimeter fencing integrated with an alarm system. The work is classified under NAICS code 238210, indicating it is a subcontract related to electrical and other construction installation services, and is intended to enhance the physical security infrastructure of school facilities. The solicitation was posted on July 30, 2026, with a response deadline of August 27, 2026, providing interested vendors a four-week window to submit proposals. The place of performance is within the school district’s jurisdiction, though specific locations are not detailed, implying the work may be distributed across multiple campuses. The contract is not subject to any set-aside provisions, and all bidders must ensure compliance with technical specifications for device integration, durability, and alarm system synchronization to meet the district’s safety requirements.

Dekalb County School District

POSTED

DEADLINE

Video Surveillance and Security Camera SystemsThe contract pertains to the design, supply, installation, and ongoing monitoring of IP-based closed-circuit television systems for the Dekalb County School District in Georgia. It encompasses all necessary hardware and software components including network cameras, network video recorders, data storage solutions, and remote viewing capabilities to ensure comprehensive security coverage across school facilities. The work must be executed in accordance with technical specifications that support seamless integration, reliable performance, and long-term operational effectiveness within the district’s existing infrastructure. All bids must be submitted by the deadline of August 27, 2026, and the contract is categorized as a subcontract under NAICS code 238210, indicating it falls within the electrical and other wiring installation contracting sector. The project requires strict adherence to industry standards for surveillance technology and emphasizes secure, scalable, and remotely accessible video monitoring to enhance school safety. The scope demands qualified vendors capable of end-to-end delivery, from initial system planning through final commissioning and support, with an expectation of compliance with all applicable state and federal security protocols for educational environments.

Dekalb County School District

POSTED

DEADLINE

Electronic Access Control SystemsThe contract entitled Electronic Access Control Systems is a subcontract issued by the Dekalb County School District in Georgia for the supply and installation of comprehensive electronic security systems across school buildings. It encompasses the procurement and deployment of electronic door locks, keycard readers, biometric scanners, and a centralized access management software platform designed to modernize and secure facility entry points. The system will enable automated, auditable, and scalable control over who can access which areas, with the software providing real-time monitoring, user management, and emergency response capabilities tailored to the needs of a school environment. All components must be integrated to function as a unified system, ensuring seamless operation, compatibility, and compliance with educational facility safety standards. The solicitation was posted on July 30, 2026, with a response deadline of August 27, 2026, allowing interested vendors a limited window to submit proposals. The North American Industry Classification System code 238210 indicates the work falls under electrical and other construction installation services, suggesting the contractor must have expertise in both hardware installation and networked software integration. The place of performance is within the Dekalb County School District’s properties, though specific locations are not detailed. The subcontract nature implies the primary contract may be managed by a higher-tier prime contractor, and bidders must be prepared to meet stringent technical, logistical, and potentially security clearance requirements to deliver and support the system effectively across multiple school sites.

Dekalb County School District

POSTED

DEADLINE

RFP - UPS-C Replacement and Distribution - 1825 St

Solicitation # ST-Doc5815124698

SaskTel is inviting qualified suppliers to submit proposals for the replacement and distribution of an uninterruptible power supply system at 1825 Lorne Street in Regina, Saskatchewan, under solicitation number ST-Doc5815124698. The project requires the installation of a new 2MW UPS system complete with input switchgear and output distribution panels, followed by the full removal of the existing unit. Participation is mandatory through SaskTel’s Ariba e-sourcing platform, and all interested suppliers must first register or ensure their existing Ariba account is properly linked to SaskTel’s domain to gain access. Only registered and approved suppliers will be considered, and access to the opportunity must be formally requested via email or phone. Key mandatory requirements include COR certification and bonding, and all participants must attend a mandatory site walkthrough on August 13, 2026, at 9:00 AM. Proposals must be submitted by August 27, 2026, and the contract term extends from award date through November 15, 2028. This procurement is governed by Chapter 5 of the Canadian Free Trade Agreement, and all inquiries should be directed to SaskTel’s Corporate Services Contracts team.

Saskatchewan Telecommunications

POSTED

DEADLINE

Holiday Lighting Installation, Maintenance & Strike Services Longhorn Lights

Solicitation # 721-26004

The University of Texas at Austin is seeking qualified vendors to provide comprehensive holiday lighting services for the Longhorn Lights program, encompassing annual installation, maintenance, and complete strike of the university-owned lighting inventory. Work must be executed in accordance with detailed design drawings, renderings, and schematics developed by the UEE production team, ensuring alignment with the university’s aesthetic and operational standards. The vendor is responsible for all consultation, on-site adjustments, and full removal of equipment after the event period, with services rendered on an as-needed basis throughout the year as required by the university’s scheduling and programming needs. All proposals must be submitted by the deadline of August 17, 2026, in response to solicitation number 721-26004, which was posted on July 30, 2026. The procurement is managed by the University of Texas at Austin under the State and Local Government (SLED) category, with performance required in Texas. Primary point of contact for inquiries is Lina-Courtney Trejo, reachable via email at lina.trejo@austin.utexas.edu or by phone at 210-784-7316. Vendors are expected to demonstrate proven experience in large-scale lighting installations and the ability to work within strict design parameters while adhering to safety and logistical requirements on campus.

University of Texas at Austin

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Mechanical Testing Specimen FabricationThe contract requires the fabrication and supply of specialized metallurgical test specimens including witness bars, tensile coupons, and hot cycle fatigue coupons, all designed to meet Marshall Space Flight Center guidance and integrated directly into laser powder bed fusion build plates for material qualification purposes. These specimens must be manufactured with precise dimensional and metallurgical controls to ensure accurate mechanical performance data under simulated operational conditions, supporting NASA’s mission to validate new materials and additive manufacturing processes. The work is classified under NAICS code 332813 and is structured as a subcontract, with a strict submission deadline of August 4, 2026, emphasizing the time-sensitive nature of the material qualification effort. All delivered specimens must be traceable, properly documented, and capable of being tested under standardized conditions to provide reliable data for certification purposes. The project is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, indicating involvement in a high-stakes aerospace development initiative. While no specific location for performance is listed, the requirement implies close coordination with NASA’s additive manufacturing and materials testing facilities. The solicitation is open to qualified subcontractors with demonstrated expertise in metallurgical specimen fabrication and integration within laser-based additive manufacturing systems.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Materials Traceability and Quality DocumentationThe contract requires full traceability documentation for all additive manufacturing builds, including detailed records of powder lot numbers, Manufacturing Traveler Logs, and the submission of a Final Build Report along with any Deviation or Nonconformance Logs. These documentation requirements ensure rigorous quality control and accountability throughout the manufacturing process, aligning with high-stakes aerospace standards. All submissions must be complete and accurate to support compliance, audit readiness, and the integrity of mission-critical components. This subcontract is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration under NAICS code 541330, with a response deadline of August 4, 2026 at 5:00 PM. The solicitation was posted on July 30, 2026, and performance location details are unspecified, indicating potential flexibility in where the work is executed. The focus is on stringent quality assurance practices specific to additive manufacturing, emphasizing documentation as a core deliverable rather than just production output.

Engineering Services

POSTED

DEADLINE

Ultrasonic Cleaning and Powder Removal for Additively Manufactured PartsNASA Shared Services Center is seeking a subcontractor to perform post-build ultrasonic cleaning of Inconel 718 turbine components produced through additive manufacturing, with the primary goal of removing trapped metal powder from intricate internal passages and geometries. The cleaning process must utilize isopropyl alcohol or an alternative solvent approved by the Marshall Space Flight Center to ensure compatibility with the material and avoid contamination or damage to sensitive features. This work is critical to the functional integrity of the components, as residual powder can compromise performance, thermal behavior, or structural reliability in high-stress aerospace applications. The opportunity is open for submissions until August 4, 2026, with a NAICS code of 339999 indicating it falls under other miscellaneous manufacturing. The place of performance and point of contact details are not specified, and the contract is not subject to any specific set-aside categories, making it broadly available to qualified vendors.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Additive Manufacturing of Inconel 718 Turbine Components via SLM Solutions 280The contract requires the performance of laser powder bed fusion additive manufacturing using the SLM Solutions 280 machine to produce turbine blades and shaft assemblies from Inconel 718, a high-performance nickel-based superalloy specified for its strength and thermal resistance under extreme conditions. The manufacturing process must adhere strictly to NASA-MSFC drawing MC34120-003 and the associated manufacturing plan 34120-MFG-PLAN, ensuring dimensional accuracy, material integrity, and mechanical properties aligned with NASA’s mission-critical standards. A design of experiments (DOE) component is included to systematically optimize laser parameters such as power, scan speed, hatch spacing, and layer thickness to achieve defect-free, high-density parts with consistent microstructure and mechanical performance. All work must be completed in compliance with federal procurement standards and delivered by the response deadline of August 4, 2026. The solicitation is classified as a subcontract under NAICS code 333314, indicating it pertains to the manufacturing of industrial machinery, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. While no specific place of performance or point of contact is provided, the nature of the work implies the need for a qualified additive manufacturing facility with demonstrated capability in aerospace-grade metal AM, experience with Inconel 718, and familiarity with NASA-specific technical documentation and quality assurance protocols.

Optical Instrument and Lens Manufacturing

POSTED

DEADLINE

Alignment Assessment per Nadcap AC 7101The contract requires a mechanical alignment evaluation of a test frame to ensure compliance with Nadcap AC 7101 standards for aerospace testing equipment, ensuring precision and quality in critical testing applications. This work is scoped to assess and verify the alignment of the test frame using established aerospace industry methodologies and documentation practices, with the goal of achieving and maintaining Nadcap accreditation. The work is classified as a subcontract under NAICS code 541330, indicating specialized engineering services for analytical and testing functions within the aerospace sector. The opportunity was posted on July 30, 2026, with a response deadline of August 5, 2026, offering a narrow window for qualified vendors to submit proposals. The contracting entity is the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, underscoring the high standards and regulatory rigor associated with this requirement. While the specific location of performance is not detailed, the deliverables must meet federal aerospace testing protocols, and success will hinge on demonstrating proven expertise in Nadcap-compliant alignment procedures and documentation.

Engineering Services

POSTED

DEADLINE

Torque Verification (up to 226 N-m)The contract requires performing torque verification on applicable components of a test system to ensure rotational force accuracy within a range up to 226 N-m. This task is critical for maintaining the precision and reliability of mechanical systems used in NASA’s operations. The work is classified as a subcontract under NAICS code 541380, which corresponds to scientific and technical consulting services, indicating the specialized technical expertise needed to carry out the verification process. The solicitation was posted on July 30, 2026, with a response deadline of August 5, 2026, providing a brief window for interested parties to submit proposals. The contracting agency is the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, underscoring the mission-critical nature of the work. No specific place of performance or point of contact details are provided, suggesting that the location and coordination may be determined post-award.

Testing Laboratories and Services

POSTED

DEADLINE

Force Verification (0–300 kN)The contract requires comprehensive force verification testing across the full operational range of 0 to 300 kN to validate the accuracy of load measurements and overall system performance under real-world conditions. This task is critical for ensuring that force measurement systems used in NASA applications meet stringent reliability and precision standards. The work must be completed in alignment with established technical protocols to confirm that instrumentation responds correctly across all load levels, from minimal to maximum capacity, and that calibration integrity is maintained throughout the testing envelope. This subcontract is issued by the NASA Shared Services Center under the National Aeronautics and Space Administration, with a NAICS code of 541380 indicating it falls under engineering services. The solicitation was posted on July 30, 2026, and responses are due by August 5, 2026, leaving a narrow window for prospective vendors to prepare and submit proposals. No set-aside designation is specified, meaning the opportunity is open to all eligible contractors. While specific performance location and point of contact details are not provided, the work is expected to support NASA’s operational systems, and successful execution will directly impact the credibility of force-related data used in aerospace missions.

Testing Laboratories and Services

POSTED

DEADLINE

Stroke Verification TestingThe contract titled Stroke Verification Testing requires the performance of standard stroke verification on an upgraded hydraulic test system to confirm its accuracy and repeatability. This technical service is critical to ensuring the system operates within specified tolerances and maintains consistent performance for downstream testing applications. The work falls under NAICS code 541380, indicating it is categorized as other scientific and technical consulting services, and is structured as a subcontract under the NASA Shared Services Center, which operates on behalf of the National Aeronautics and Space Administration. The solicitation was posted on July 30, 2026, with a response deadline of August 5, 2026, at 1:00 PM. No specific place of performance or point of contact is listed, and there is no set-aside designation noted. Interested parties must submit their proposals through the provided SAM.gov link before the deadline. The scope is narrowly focused on verification procedures without additional requirements for system modification, training, or documentation beyond the validation of stroke performance metrics.

Testing Laboratories and Services

POSTED

DEADLINE

Test System Software Upgrade and ConfigurationThe contract requests the installation, configuration, and validation of updated control software for the Instron 8800MT mechanical testing system to ensure full compliance with NASA’s standardized protocols for mechanical testing. The scope requires precise integration of the software to maintain accuracy, repeatability, and data integrity under NASA’s stringent operational requirements, with all modifications fully documented and validated through required testing procedures. The work must be completed in accordance with NASA’s technical specifications and quality assurance standards without disruption to existing testing workflows. This subcontract, issued by the NASA Shared Services Center under the NAICS code 511210, is open for responses until August 5, 2026, with a posted date of July 30, 2026. The place of performance and specific location details are not defined, indicating flexibility in execution but requiring the vendor to coordinate logistics to meet NASA’s timelines and compliance needs. The software update must be delivered and validated by a qualified party with demonstrated experience in aerospace-grade testing systems and prior engagement with NASA’s mechanical testing frameworks.

Software Publishers

POSTED

DEADLINE

Hydraulic Test System Controller UpgradeThe contract involves the supply and integration of the Instron 8800MT Controller to upgrade an existing Instron 8521 hydraulic test frame, ensuring seamless compatibility with legacy hardware components. This modernization effort is designed to enhance performance, reliability, and operational efficiency while preserving the integrity of current test systems. The project requires detailed engineering support from the original equipment manufacturer to facilitate smooth transition, calibration, and functional validation of the new controller within the existing test environment. The solicitation is issued as a subcontract under NAICS code 334510 by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Responses must be submitted by August 5, 2026, with the opportunity publicly posted on July 30, 2026. The place of performance and specific delivery location are not detailed in the provided data, but the work is expected to occur at sites where the Instron 8521 test frames are currently deployed. Technical expertise in hydraulic testing systems and proven experience with Instron equipment integration are critical for successful proposal submission.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Accelerated Payments to Small Business Subcontractors (Administrative)This contract requires strict administrative compliance with FAR clause 52.232-40 to guarantee timely payments to small business subcontractors, mandating robust tracking and reporting mechanisms to ensure payment deadlines are met without delay. The responsibility falls on the prime contractor to implement systems that monitor subcontractor invoicing, verify compliance with payment timelines, and submit required reports to demonstrate adherence to the accelerated payment requirements under the Federal Acquisition Regulation. The contract is classified as a subcontract under NAICS code 541219 and is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. It was posted on July 30, 2026, with a response deadline of August 6, 2026, indicating a tight window for interested parties to submit proposals. While no specific set-aside or place of performance is identified, the focus remains on ensuring financial accountability and support for small business subcontractors through structured administrative processes rather than financial incentives or procurement preferences.

Other Accounting Services

POSTED

DEADLINE

Sustainable and Duty-Free Procurement CoordinationThe contract entails the coordination of duty-free entry for foreign-sourced components in compliance with FAR 52.225-8, requiring precise management of customs documentation, proper labeling, and effective collaboration with suppliers to ensure adherence to regulatory standards. This work involves thorough tracking and documentation processes to facilitate the lawful exemption of duties on eligible components while maintaining full compliance with U.S. government importation rules. The subcontractor must demonstrate expertise in navigating international trade regulations and maintaining accurate records to support audit readiness and supply chain transparency. This effort supports NASA Shared Services Center’s procurement objectives under NAICS code 488510, which pertains to freight transportation arrangement services, indicating a logistical and compliance-focused scope. The solicitation was posted on July 30, 2026, with responses due by August 6, 2026, and is structured as a subcontract under the National Aeronautics and Space Administration. All activities must align with federal acquisition requirements and will be performed in support of NASA’s broader mission to sustain efficient, duty-free procurement practices for critical components.

Freight Transportation Arrangement

POSTED

DEADLINE