Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBE ASSEMBLY, METAL

Active
SPE4A5-26-T-321TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a metal tube assembly identified by part number 205-076-259-001 and 205-076-259-1, manufactured by Bell Textron Inc, under NSN 4710-00-951-0143, with a total quantity of four units required. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which take precedence over other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with all items marked and labeled accordingly. The unit of issue is each, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item is to be delivered FOB origin with a required delivery date of 171 days from the contract award, targeting delivery by September 27, 2027. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and attributes are to be classified with verification levels or AQLs as defined. Documentation for source approval and packaging compliance is mandated. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation number SPE4A5-26-T-321T, with a response deadline of August 12, 2026, and a posted date of August 4, 2026. The NAICS code is 332996, and the contracting entity is the Department of Defense, specifically the ASC Supplier Oper OEM Division. Primary point of contact is Kay Bates, reachable via email and phone. The unit of issue and purchase unit are aligned with DoD standards, and manufacturers must adhere to all referenced military standards and DLA directives without deviation. The original required delivery date is set for January 31, 2027, with the final delivery deadline extending to September 27, 2027.

General Info

Four metal tube assemblies, part number 205-076-259-001/1, FOB origin, delivery by September 27, 2027, per DLA and MIL-STD requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-321T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Kay Bates
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE ASSEMBLY,METAL
TUBE ASSEMBLY<(>,<)> METAL
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
BELL TEXTRON INC 97499 P/N 205-076-259-001
BELL TEXTRON INC 97499 P/N 205-076-259-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-321T
SECTION B
PR: 7017740980 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740980 0001 EA 4.000
NSN/MATERIAL:4710009510143
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:09/27/2027
SPE4A5-26-T-321T NSN/Part Number: 4710-00-951-0143 Quantity: 4 EA Purchase Request: 7017740980QTY: 4 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Metal Buckles and Hardware Supply for Tactical Harnesses
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, REPAIR, PIPE
Solicitation # SPE7M3-26-T-7822
The contract pertains to the procurement of two clamp repair pipe units with a nominal pipe size of 4 inches and a length of 7.5 inches, identified by NSN 4730-01-014-8717 and part number 226-048007-000. The total quantity required is two units, each priced at $2.00, with delivery required within 20 days from the contract award date, FOB origin, and no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, though DLA Master List of Technical and Quality Requirements take precedence. Packaging must be marked and labeled per MIL-STD-129, and the unit of issue is each (EA), with packaging quantity per unit pack specified in the contract. The items must be palletized according to DLA packaging requirements and shipped via traceable freight methods, not parcel post. Delivery is directed to Fort Hood, Texas at Building 4925, Santa Fe Avenue, with the designated mark for and shipping address being the same. The shipment must be accompanied by the tracking control number W50YEF62090230 and must arrive no later than July 31, 2026, as per the original required delivery date. The solicitation number is SPE7M3-26-T-7822, issued under the NAICS code 332996 by the DLA Fluid Handling Division under the Department of Defense. All technical and quality specifications referenced by R or I codes are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date. The primary point of contact is William Cain, and the contract is accessible via the DIBBS portal.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M0-26-T-028M
The contract pertains to a quick-disconnect coupling half, identified by NSN 4730-01-516-8346, with a quantity of one unit. It is classified as a commercial off-the-shelf item, and adequate catalog data is available to the procurement agency for evaluating alternatives. The item must comply with the DLA Packaging Requirements for Procurement and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The procurement is subject to the removal of government identification from non-accepted supplies. The solicitation number is SPE7M0-26-T-028M, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332996, and the contracting agency is the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance located in Jacksonville, Florida, 32226-3404. Delivery is required within five days after delivery order issuance.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
TEE, TUBE TO BOSS
Solicitation # SPE7M0-26-T-030X
The contract specifies the procurement of a TEE, TUBE TO BOSS with NSN 4730-01-397-1241, quantity of two units, to be delivered within five days of award under solicitation SPE7M0-26-T-030X. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede other specifications. The item is sourced from approved suppliers including ADMIRAL VALVE LLC and CIRCOR NAVAL SOLUTIONS LLC, and tooling or casting/forging may be required, necessitating contact with DLA for support if unavailable. Delivery is directed to Pearl Harbor Naval Shipyard with specific shipping and receiving instructions, and the required delivery date is August 5, 2026. The contract is administered by the Department of Defense’s Maritime Supply Chain ESOc, with Grace Beck listed as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SE
Solicitation # SPE7MC-26-T-166F
The contract is for one sediment strainer element, identified by NSN 4730-01-431-6632 and part number 31423N, to be supplied by LESLIE CONTROLS, INC. Delivery is required within 20 days FOB destination to the USS McFaul DDG74 at FPO AE 09578, with no variance allowed in quantity. The item must comply with DLA packaging requirements based on MIL-STD-2073-1E, including specific packaging methods, materials, and marking in accordance with MIL-STD-129. The strainer element must not contain mercury or mercury-containing compounds unless specifically exempted for functional uses such as batteries, lamps, sensors, or instrument controls, and in those cases, secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced from the DLA Master List, with revisions controlled by the solicitation issue date. Transportation and shipment logistics follow DLAD procedure notes C19 and C20, and vendor compliance is monitored with government tracking identifiers including DIBBS solicitation number SPE7MC-26-T-166F, project code 9AL TP 2, and a required delivery date of July 31, 2026. Inspection and acceptance occur at the destination, and the point of contact is Nicole Betts of the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
MANIFOLD, HYDRAULIC
Solicitation # SPE4A1-26-T-2513
The contract specifies the procurement of a hydraulic manifold, a critical component for aircraft hydraulic vacuum deicing systems, manufactured from Alcoa forging No. 51564 made of 2014 aluminum alloy and heat treated to 2014-16, conforming to Lockheed Martin drawing 351483. This is a restricted-source item requiring formal government engineering approval, and it is designated as a critical application item with stringent quality and security controls. The item must comply with multiple technical and quality requirements from the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 Cybersecurity Self-Assessment, covered defense information protocols, and physical identification marking per RQ017. Zero-defect sampling is mandated using MIL-STD-1916 or ASQ standards, with acceptance criteria of zero non-conformances unless otherwise specified, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor features respectively. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior government approval. The item shall be packaged per ASTM D3951, with all packaging and labeling conforming to MIL-STD-129 and palletization as outlined in DLA Packaging Requirements RP001, with precedence given to DLA requirements over ASTM standards. The unit of issue is one each, with no tolerance for quantity variance, and delivery is FOB origin, inspected and accepted at destination. The required delivery date is 171 days after award, with a need ship date of January 31, 2027 and original required delivery date of September 29, 2027. Packaging and shipping details direct delivery to DLA Distribution Depot Hill in Hill AFB, Utah, with specific freight shipping instructions and transportation procedures referenced. Contract data identifies the solicitation as SPE4A1-26-T-2513, with a primary point of contact at DLA Aviation Supply Chain, and the item is classified under NAICS code 332996 for other fabricated metal product manufacturing.
AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
NIPPLE, PIPE
Solicitation # SPE7M0-26-T-028P
A copper nipple, pipe with a thread size of 1.500 inches and an overall length of 2.000 inches is being procured under contract SPE7M0-26-T-028P, with the NSN 4730-01-231-7035 and McMaster-Carr part number 4568K262. The requirement is for 30 units, each priced at $30.00, totaling $900.00, with delivery mandated within five days of award, FOB origin, and no variance allowed in quantity. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 specification. Packaging and labeling must follow DLA packaging standards under RP001, and palletization must meet the same requirements. Inspection and acceptance take place at the destination. Shipping must be by the fastest traceable means, excluding parcel post, to the receiving officer at Building 170, Portsmouth Naval Shipyard in Kittery, ME. The original required delivery date is August 3, 2026, and the contract is tied to a procurement request numbered 7017719977. For government use, specific codes such as DIC A4A, DIST 9B, ADV 2L, and FC QR are included. The point of contact for the solicitation is Kathleen Hipes, and the contract was posted on August 4, 2026, with responses due by August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
PLUG, CLEANOUT, INTER
Solicitation # SPE7M0-26-T-028N
The contract specifies the procurement of two brass plug, cleanout intercepter units, each measuring 4.000 inches, with the NSN 4730012158791 and part number 2400K57 from McMaster-Carr Supply Co. The items must be delivered within five days to the Letterkenny Army Depot in Chambersburg, Pennsylvania, under FOB origin terms with zero variance allowed in quantity. All packaging must comply with ASTM D3951 and be marked and labeled in accordance with MIL-STD-129, while adhering to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The items must be palletized per RP001 requirements and shipped via the fastest traceable means, excluding parcel post. The unit of issue is each, with a total price of $2.000 per unit, and inspection and acceptance occur at the destination. Delivery is required by August 3, 2026, with government tracking identifiers including W25G1Q621000R4 and other control codes for logistics and accountability. All requirements referenced by R or I numbers are governed by the DLA Master List effective as of the solicitation issue date.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
COUPLING ASSEMBLY, T
Solicitation # SPE4A5-26-T-327M
The contract pertains to the procurement of a flexible tube coupling assembly, identified by part number 65E712-3831 and NSN 4730-01-238-5793, with a total quantity of four units to be delivered under solicitation SPE4A5-26-T-327M. Delivery is required within 256 days from contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, and marking must adhere to MIL-STD-129 without special markings. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. Strict prohibitions are in place regarding mercury and mercury-containing compounds, except for limited functional applications such as certain instruments, batteries, and weapons systems, and all packaging, preservation, and marking materials must be free of mercury. Additionally, Class I ozone-depleting chemicals are entirely banned, and any substitute chemicals require prior approval unless expressly authorized by specifications. The item is designated as a critical application item, subject to DLA’s master list of technical and quality requirements referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Unit of issue is AY, consistent with DoD standards, and no Item Unique Identification is required per customer request. The contract specifies zero variance in quantity and includes transportation guidelines per DLAD Proc Notes C19 and C20. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under NAICS code 332996, managed by the Department of Defense’s ASC Supplier OEM Division. The primary point of contact is Renee Wassum, and the original required delivery date is March 15, 2027, though the need ship date is listed as March 15, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, PIPE
Solicitation # SPE7L4-26-T-5981
The contract pertains to the procurement of 16 units of LOCKNUT, PIPE identified by NSN 4730-01-442-6119 and part number 50066, sourced from approved suppliers including AMZ ALABAMA INC, BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP, HYCO ALABAMA LLC, and HYDRADYNE-TAD LLC DBA TAD GROUP. The unit price is $16.00 per EA, with a total contract value of $256.00, and delivery is required within 20 days FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes. Marking must adhere to MIL-STD-129 with no special marking required. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and packaging must follow DLA-specific guidelines under RP001. The delivery destination is the Coleman Works Site in Mannheim, Germany, and transportation instructions are governed by DLAD procedural notes C19 and C20. The contract was issued under solicitation SPE7L4-26-T-5981 with an original required delivery date of July 25, 2024, and is managed by the Department of Defense under NAICS code 332996, with point of contact Anna-Rachelles Betts via DLA.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-028R
The contract is for a tube assembly, metal, with part number 93197-514 and NSN 4710-01-444-4622, requiring delivery of two units within five days of award. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, as directed by the DLA Packaging Requirements for Procurement, with all DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 guidelines, and each unit must be marked and labeled accordingly. The destination for delivery is the U.S. Army SSA Powidz AB in Poland, with the same address used for marking and shipping. Transportation instructions are governed by DLAD Proc Note C19 for general transport and C20 for first destination. The required delivery date is August 5, 2026, and the contract is tied to solicitation SPE7M0-26-T-028R under the NAICS code 332996. All technical and quality specifications referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, and any conflicting standards are superseded by these official DLA directives. The contract is issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office with the unit of issue as each, at a total price of $2.00.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
PLUG, PIPE, MAGNETIC
Solicitation # SPE7M3-26-T-7832
The contract is for the procurement of 245 units of a magnetic pipe plug identified by NSN 4730-01-038-5290 under solicitation SPE7M3-26-T-7832, with a delivery requirement within 150 days after award. The item is classified as technical data subject to export control under either ITAR or EAR, meaning any sharing, transfer, or disclosure of associated technical information to foreign persons—whether inside or outside the United States—is strictly regulated and requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and distribution is restricted exclusively to Department of Defense contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA to access such information. The purchase request number is 7017697479, and the contracting activity is the Fluid Handling Division of the Department of Defense, with performance location in Anniston, Alabama. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026, with William Cain designated as the primary point of contact for inquiries.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details