Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Unable to Decompose Subcontract Opportunities

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to a subcontract opportunity under the Nuclear Reactor Program within the Department of Defense, with a solicitation number SPE7M226Q0690 and a posting date of July 29, 2026. The response deadline for submissions is August 12, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. No NAICS code, set-aside type, or organizational classification has been provided, and key contact information is unavailable. The system was unable to decompose potential subcontract opportunities, resulting in limited data for suppliers or partners seeking to participate. Further details cannot be retrieved due to technical constraints, though the official UI link is accessible for direct inquiry.

General Info

Subcontract under DoD Nuclear Reactor Program, bid due August 12, 2026, performance in New Cumberland, PA.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Contract details could not be retrieved due to gateway timeout errors. No data available to identify subcontract opportunities.

Similar Contracts

Same NAICS industry code

Subcontract Opportunity Identification PendingNo prime contract details are available, and subcontract opportunities cannot be identified at this time. The solicitation is marked as pending with a posted date of July 30, 2026, and a response deadline of September 1, 2026. It is designated as a subcontract opportunity under the SBA Certified Women-Owned Small Business Program Set-Aside, intended for businesses certified as WOSB. The North American Industry Classification System code is not provided, and the contracting organization is listed as FA8137 Afsc Pzioc under the Department of Defense. The place of performance is indicated as 73145, though specific city and state details are missing, and no point of contact information is available. The official listing can be accessed via the provided SAM.gov link.

FA8137 Afsc Pzioc

POSTED

DEADLINE

in about 1 month

Unable to decompose sub-opportunities due to system errorThe contract is a small business set aside under the SBA program with no specific subcontract opportunities identifiable due to a system error preventing decomposition of the prime contract details. Posted on July 30, 2026, with a response deadline of August 19, 2026, the opportunity is designated as a total small business set aside, though the NAICS code is not provided and the organization type remains unspecified. The performing agency is the USDA ARS AFM APD within the Department of Agriculture, with the place of performance located in College Station, Texas, at zip code 77843. No point of contact information is available, and the city, state, and country information for the office address are missing. The solicitation number is undefined, and the opportunity can be viewed via the provided SAM.gov link.

USDA Ars Afm Apd

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on July 29, 2026, with a response deadline of August 20, 2026, and is categorized as a subcontract opportunity under DAS Procurement, specifically linked to the Connecticut agency office. No solicitation number, set-aside details, NAICS code, or organizational type is provided, and critical contract components such as the scope, CLINs, or point of contact are unavailable, preventing any clear identification of deliverables or supplier requirements. The place of performance and office address details are incomplete, with no city, state, zip code, or country information specified, and the only accessible reference is an online portal link for bid board information, leaving potential bidders with insufficient data to prepare a responsive proposal.

DAS Procurement

POSTED

DEADLINE

Invalid Knowledge Base ReferenceThe contract is a subcontract flagged for a Service-Disabled Veteran-Owned Small Business Set-Aside, indicating eligibility and preference for businesses owned by service-disabled veterans. It was posted on July 29, 2026, with a response deadline of August 10, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. The place of performance is specified as Corpus Christi, Texas, with a zip code of 78419-5255, though no exact address or point of contact information is provided. The North American Industry Classification System code is listed as NA, and the agency organization details are incomplete, preventing full contract decomposition or analysis. The solicitation number is absent, and the contract can be accessed via a DIBBS link, but no prime contract data or vendor details are available for review.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Unable to decompose subcontract opportunities

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Unable to Decompose Subcontract Opportunities

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Unable to Retrieve Subcontract OpportunitiesUnable to retrieve subcontract opportunities due to a system error, the contract record reflects a failure to load any substantive details despite being listed under the Maritime Supply Chain ESOC Buys division of the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline set for August 10, 2026, and is categorized as a subcontract opportunity with no set-aside designation, no NAICS code, and no identifiable point of contact or geographic location for performance. The official link to the record is accessible, but no supplier or subcontractor opportunities could be parsed or verified due to the 504 Gateway Timeout error that prevented data retrieval from the DIBBS system.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on July 29, 2026, with a response deadline of August 10, 2026, and is categorized as a subcontract under the Maritime Supply Chain within the Department of Defense. The place of performance is designated as Tinker AFB with a zip code of 73145-8000, though no specific city, state, or country details are provided beyond that. The NAICS code is listed as NA and no set-aside type or description is available, indicating either incomplete classification or non-applicability. The solicitation number is null, and no point of contact information is included, limiting direct correspondence options. Access to the full details is available through the provided DIBBS link, but attempts to decompose the contract into subcontract or supplier opportunities have been blocked due to gateway timeouts, preventing further analysis or procurement planning.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Unable to Retrieve Subcontract OpportunitiesThe contract pertains to a subcontract opportunity managed by the ACTIVE DEVICES DIVISION under the Department of Defense, with a solicitation posted on July 29, 2026, and a response deadline set for August 10, 2026. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, though no specific city or state details are provided beyond that. The NAICS code is listed as NA, indicating no classification has been assigned, and no set-aside type or description is specified. The point of contact information is unavailable, and while the solicitation number is present in the system link, no substantive details regarding requirements, scope, or subcontractor eligibility could be retrieved. The opportunity is accessible via a dedicated DIBBS portal link, but no subcontracting opportunities or additional contractual terms are currently identifiable due to system limitations.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Unable to Retrieve Sub-Opportunity DataA subcontract opportunity titled “Unable to Retrieve Sub-Opportunity Data” was posted on July 29, 2026, with a response deadline of August 5, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete. The solicitation number is unavailable, and the NAICS code is listed as NA, indicating the specific industry classification has not been provided. The contracting activity falls under the Maritime Supply Chain within the Department of Defense, with the place of performance identified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. No office address or point of contact information is available, and the prime contract details could not be retrieved due to a gateway timeout, preventing any further decomposition of subcontract opportunities. The official solicitation page can be accessed through the DIBBS portal at the provided URL.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Unable to Retrieve Subcontract OpportunitiesA system outage has prevented the retrieval of any subcontract or supplier opportunities, making it impossible to decompose or analyze potential contracting avenues at this time. The solicitation titled "Unable to Retrieve Subcontract Opportunities" was posted on July 29, 2026, with a response deadline of August 10, 2026, and is categorized as a subcontract opportunity under the Department of Defense's Construction & Equipment Manu & Con organization. The place of performance is listed as New Cumberland, Pennsylvania, with a zip code of 17070-5002, while no specific NAICS code, set-aside type, or point of contact information is available. The agency name and organizational details are provided, but critical fields such as city, state, and contact details remain undefined. All information is accessible via the DIBBS portal at the provided link.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesDue to gateway timeout errors, the prime contract details could not be retrieved, preventing the identification of any subcontract or supplier opportunities related to this solicitation. The posting, titled "Unable to Decompose Subcontract Opportunities," was issued on July 29, 2026, with a response deadline of August 7, 2026, under the type classification of subcontract. The solicitation number is SPE4A726Q0932, and while it is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, no NAICS code, set-aside information, agency office address, or place of performance details are available. No point of contact is listed, and the absence of critical contract data renders it impossible to assess potential supplier involvement or bid requirements at this time.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

Solicitation # SPE7M2-26-T-5822

The contract covers the procurement of 490 machine screws identified by NSN 5305-01-292-7196 and part number 11-481, supplied by DRS Power & Control Technologies Inc and DRS Naval Power Systems Inc. All items must comply with DLA packaging requirements as defined in RP001 and packaging standards MIL-STD-2073-1E, including specific preservation methods, materials, and marking per MIL-STD-129 with no special markings required. Delivery is FOB origin with a 168-day lead time, and inspection and acceptance occur at destination. The quantity is strictly fixed with no variance allowed. The screws must not contain mercury or mercury compounds in any form, including during preservation, packaging, or marking, with exceptions only for functional uses in batteries, lighting, sensors, weapons, or chemical reagents as specified by NAVSEA, and portable devices containing mercury must meet additional containment requirements. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with undefined attributes treated as major and acceptance requiring zero non-conformances unless otherwise stated. Packaging must align with palletization standards and the provided parcel post and shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is under solicitation number SPE7M2-26-T-5822 with a response deadline in August 2026 and an original delivery requirement by March 2027.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

CHAIN ASSEMBLY, SINGLE

Solicitation # SPE7M2-26-T-5832

This contract is for the procurement of a single-leg chain assembly identified by NSN 4010-01-453-9410 and part number 92692A550, with a quantity of 278 units to be delivered FOB origin within 168 days. The item is classified as a commercial item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, inspection, and mercury restrictions. All packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with marking conforming to MIL-STD-129 and no special marking required. The delivery destination is Industries of the Blind Inc in Greensboro, NC, and inspection and acceptance occur at the destination. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs consistent with critical, major, or minor classifications. Mercury or mercury-containing compounds are strictly prohibited in the product, packaging, preservation, or marking, with limited exceptions for functional uses in batteries, instruments, or sensors as defined by NAVSEA, and any portable devices containing mercury must include a secondary containment barrier. The contract enforces a zero variance in quantity, with a need ship date of January 26, 2027, and the original delivery date set for March 27, 2027. Technical data availability and compliance with DLA unit of issue standards are required, and all documentation must align with the solicitation number SPE7M2-26-T-5832 and its associated revisions.

Other Fabricated Wire Product Manufacturing

POSTED

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE7M2-26-T-5890

The contract is for the procurement of 240 socket head cap screws with NSN 5305-01-252-9154 under solicitation SPE7M2-26-T-5890, issued by the Department of Defense’s Nuclear Reactor Program. The items must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have government identification removed. Surface marking requires the manufacturer’s symbol to be directly applied to the screw, as listed in MIL-HDBK-57, excluding fasteners with thread diameters of 0.190 inches or smaller, and no markings are permitted on bearing surfaces. Configuration changes require an engineering change proposal for any deviation or waiver. The screws are procured under a federal specification as a fully competitive acquisition. Delivery is required within 168 days after contract award, with the place of performance specified as New Cumberland, PA, 17070-5002. The solicitation opens on July 30, 2026, with responses due by August 10, 2026, and primary point of contact is David Larsen at the provided email and phone number.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-5826

The contract pertains to the procurement of a gasket identified by part number 03003031403 and NSN 5330015269710, with a quantity of 33 units to be delivered FOB origin within 168 days of the contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements for Procurement, including specific methods for preservation, wrapping, and containerization, with unit packaging marked as BV and intermediate container code E5. Marking follows MIL-STD-129 with no special marking codes applied. The item is designated as a critical application item, requiring strict adherence to quality and delivery standards. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with the required ship date set for January 26, 2027, and the original delivery date March 27, 2027. The contract enforces zero variance in quantity and specifies destination inspection and acceptance. Transportation rules are governed by DLAD Procurement Notes C19 and C20. The solicitation, identified as SPE7M2-26-T-5826, was posted on July 30, 2026, with responses due by August 10, 2026, under NAICS code 339991, and is managed by the Department of Defense’s Nuclear Reactor Program, with primary point of contact David Larsen.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-5840

This contract is for the procurement of a fluid filter with NSN 4330-01-561-3353 and part number 4240T-8TT supplied by NORMAN FILTER COMPANY, L.L.C., under solicitation SPE7M2-26-T-5840. The requirement is for 94 units delivered FOB origin with no tolerance for quantity variance, and delivery is due within 168 days from the contract award. Inspection and acceptance occur at the destination warehouse located in Tracy, California. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization, while marking adheres strictly to MIL-STD-129 without any special codes. The product is designated as a critical application item. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The contract is issued under a Women-Owned Small Business Set-Aside with a NAICS code of 333914, and the unit of issue is each (EA) at a unit price of $94, totaling $8,836. The required ship date is January 26, 2027, with an original delivery deadline of February 14, 2027. Transportation and shipping instructions reference DLA procedural notes C19 and C20, and all correspondence is directed to the specified recipient warehouse.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE7M2-26-T-5810

The contract pertains to the procurement of 3,748 units of INSERT, SCREW THREAD, identified by NSN 5325-00-290-4494 and part number MS122127, governed by non-government standards NASM122116 through 122155 Revision 3 and NASM8846 Revision 2. The item is designated as a commercial item, and full and open competition applies. All supplies must comply with DLA packaging requirements and the DLA Master List of Technical and Quality Requirements, with configurations managed through Engineering Change Proposals and formal variance requests. Mercury and mercury-containing compounds are strictly prohibited in manufacturing, preservation, packaging, and marking, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and chemical reagents authorized by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with preservation method 10, unit container A1, and marking in accordance with MIL-STD-129 without special markings. Delivery is FOB origin with a 168-day lead time and zero variance tolerance. The item must be delivered to DLA Distribution Cherry Point, North Carolina, with a required ship date of January 26, 2027, and original delivery deadline of June 25, 2027. Transportation and freight details follow DLAD Proc Notes C19 and C20. The solicitation number is SPE7M2-26-T-5810, issued by the Department of Defense’s Nuclear Reactor Program, with responses due by August 10, 2026, and point of contact David Larsen.

Hardware Manufacturing

POSTED

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE7M2-26-T-5829

This contract specifies the procurement of a filter element designated as FLUI, with the NSN 4330-01-496-2689 and a required quantity of 18 units. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific methods for preservation, wrapping, and containment, and palletization must adhere to DLA packaging guidelines. Mercury and mercury-containing compounds are strictly prohibited in the hardware unless explicitly exempted for functional applications such as batteries, fluorescent lights, sensors, weapon systems, or authorized chemical reagents, and any exempted portable devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The item is designated as a critical application item, and only two approved suppliers, American United Manufacturing, LLC and Norman Filter Company, L.L.C., are referenced by their respective part numbers. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the contract allows zero variance in quantity. The delivery deadline is 168 days from the contract award, with an original required delivery date of June 5, 2027, and a need ship date of January 26, 2027. The sole delivery point is the DLA Distribution San Joaquin warehouse in Tracy, California, and transportation and shipping instructions follow DLA procedural notes C19 and C20. The solicitation number is SPE7M2-26-T-5829, issued under a federal agency contract by the Department of Defense’s Nuclear Reactor Program, with a response deadline of August 10, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-5909

The contract under solicitation number SPE7M2-26-T-5909, titled SPRING, FLAT, is a firm-fixed-price procurement for 73 units of a specific spring component identified by NSN 5360009198383, with a unit price of $73.00 and a total contract value of $5,329.00. Delivery is required within 168 calendar days after award, with FOB destination terms specifying delivery to Industries of the Blind Inc at 6920 West Market Street, Greensboro, NC 27409. The item is designated as a Critical Application Item and must be marked in strict accordance with MIL-STD-130N, including Unique Item Identifier (UID) and machine-readable barcoding. Packaging must comply with MIL-STD-2073-1E using the CLNG/DRY preservation method (Code 10), with no additional preservation, wrap, or cushioning materials required, and palletization must meet DLA’s RP001 Packaging Requirements. All shipments must be labeled per MIL-STD-129 with no special marking codes applied. The contract imposes stringent compliance requirements regarding hazardous materials, explicitly prohibiting the intentional incorporation of mercury or mercury-containing compounds unless exempted for functional uses such as batteries, fluorescent lamps, or specific instruments, with all such exempted items requiring a secondary containment boundary per NAVSEA 5100-003D. Hazard communication standards under 29 CFR 1910.1200 apply to all hazardous substances, and contractors must adhere to the Prohibition on Hexavalent Chromium and Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. Cybersecurity and information safeguarding obligations are enforced through DFARS clauses including 252.204-7012 for safeguarding covered defense information and NIST SP 800-171 assessment requirements. The contract mandates electronic invoicing through Wide Area WorkFlow (WAWF), requires compliance with employment eligibility and anti-trafficking regulations, and includes provisions for accelerated payments to small business subcontractors and restrictions on mandatory arbitration. Offerors must authenticate their small business status, UEI, and CAGE codes and affirm compliance with all socioeconomic and trade restrictions. Inspections and acceptance occur at the destination, and all representations, certifications, and submissions must be delivered electronically via

Spring Manufacturing

POSTED

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M2-26-T-5924

The contract specifies the procurement of an electrical plug connector with part number 10-260395-15N and NSN 5935-00-490-4544, under solicitation SPE7M2-26-T-5924, with a requirement for six units to be delivered within 148 days from the award date. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all manufacturing processes must strictly avoid the use of Class I ozone-depleting substances unless explicit written approval from the contracting officer is obtained. Mercury and mercury-containing compounds are prohibited in or in direct contact with the component except in specific exempted applications such as batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices required to have shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. The connector must meet NAVAIR aircraft launch and recovery equipment traceability standards, and bare item markings must include the contract number, NAWC CAGE code, and part number unless superseded by associated technical drawings. Packaging and preservation must adhere to MIL-DTL-55330 for connectors and be labeled in accordance with MIL-STD-129, with preservation methods per MIL-STD-2073-1E. Items must be shipped FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. Delivery is targeted for January 6, 2027, and all materials must align with the latest revisions of applicable military specifications and procurement policies as of the solicitation issue date.

Electronic Connector Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-5869

This contract is for the supply of a push switch with part number P002948 from AEROGO, INC and 800T-2HGH2KB6AX from ROCKWELL AUTOMATION, INC, identified by NSN 5930016762060, under solicitation SPE7M2-26-T-5869. A total of 32 units are required to be delivered FOB origin within 168 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application component, and strict compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129 is mandated, including specific packaging methods, containment types, and palletization per RP001. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or specified reagents, with portable mercury-containing devices requiring shock-proof design and secondary containment in accordance with NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. The delivery address is the DLA Distribution facility in New Cumberland, PA, and transportation logistics follow DLA Procurement Notes C19 and C20. The original required delivery date is January 18, 2027, with a needed ship date of January 26, 2027. The contract is issued under the DoD authorized unit of issue and pertains to a federal procurement under NAICS code 335313 managed by the Department of Defense’s Nuclear Reactor Program.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

SLEEVE, COMPRESSION,

Solicitation # SPE7M2-26-T-5848

The contract specifies the procurement of a compression sleeve for tube-hose fitting, identified by NSN 4730-01-664-8660 and part number 54115200, with a quantity of 136 units to be delivered within 168 days under solicitation SPE7M2-26-T-5848. The item is classified as a critical application item, and all supplies must strictly comply with DLA packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for specified functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with preservation method 10, dry storage, and unit packaging code U, while marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging guidelines, and delivery is FOB origin to the specified DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no quantity variance allowed. The contract requires delivery by January 26, 2027, under an original required date of March 27, 2027, with transportation governed by DLA procedural notes C19 and C20.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

CLAMP, ADJUSTABLE

Solicitation # SPE7M2-26-T-5793

The contract specifies the procurement of 33 adjustable clamps with a clamping capacity of 0 to 2 inches and a 1/2-inch bolt size, measuring 4-1/4 inches in length and 1-3/4 inches in width, identified by NSN 3460-00-214-8727 and part number 19101 from JERGENS INC. Delivery is required within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no tolerance for quantity variance. The items must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and packaging codes, and must adhere to DLA packaging requirements. All packaging, preservation, and marking materials are prohibited from containing mercury or mercury compounds, in line with NAVSEA 5100-003D requirements, and must also exclude Class I ozone-depleting chemicals. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and documentation for source approval must be provided as needed. The delivery must be completed by January 26, 2027, with an original required date of March 25, 2027.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE