Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Wing Panel Manufacturing and Assembly

Active

Federal

Response Deadline08/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Wing Panel Manufacturing and Assembly pertains to the production and delivery of PANEL, WING units under strict adherence to technical specifications, material certifications, and CAGE/part number requirements, ensuring full compliance with defense industry standards. It is structured as a subcontract and falls under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 336413 identifying it within the Aircraft and Aircraft Parts Manufacturing sector. The solicitation was posted on July 31, 2026, with responses due by August 28, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though specific location details for performance or contact information are not provided. All deliverables must meet rigorous quality and traceability criteria aligned with federal procurement protocols.

General Info

Small business subcontract for wing panel manufacturing under defense standards, due August 28, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 28

Submission deadline

Response Deadline

08/28/2026, 05:00:00 PM UTCin 28 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 'PANEL, WING' units in full compliance with technical specifications, material certifications, and CAGE/part number requirements.

Similar Contracts

Same NAICS industry code

Small Business Subcontracting ParticipationCertified small businesses including WOSB, SDVOSB, and HUBZone concerns are invited to participate as subcontractors under a total small business set-aside prime contract managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. This opportunity is specifically aligned with NAICS code 336413, which pertains to aerospace product and parts manufacturing, and encompasses potential roles in manufacturing, testing, or logistics functions. The solicitation is structured to ensure full small business participation as mandated by the Small Business Administration under FAR 19.5, and interested entities must respond by the deadline of August 28, 2026. Opportunities are available to qualified small businesses supporting defense-related supply chain activities, with all work expected to be performed under the prime contract awarded to a certified small business concern. Participation is only open to entities that meet SBA certification requirements and can demonstrate capability in the specified technical areas.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE4A7-26-R-0670

The contract is for one unit of a PANEL, WING with a delivery requirement of 780 days after award, under solicitation SPE4A7-26-R-0670, which is a total small business set-aside under NAICS code 336413. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on procurement size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons anywhere in the world, and access is restricted to contractors with approved JCP certification, completion of DOD export control training, and DLA authorization. Physical identification of the item is required per RQ017, but item unique identification is waived per customer request, with DFARS 252.211-7003(c)(1)(i) applying. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Packaging must meet DLA standards, and all technical data handling follows strict export control protocols as outlined in DFARS 252.225-7048. The contract is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Ryan Loeffelholz as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

LOCK BLOKC LWR RT

Solicitation # SPE4A5-26-T-315Y

The contract pertains to the procurement of LOCK BLOCK LWR RT with NSN 4920-01-414-8116 and part number 36000419, under solicitation SPE4A5-26-T-315Y, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Nine units are required at a unit price of $8.00, totaling $64.00, with delivery mandated within 482 days from the need ship date of December 3, 2027. All items must be delivered FOB origin to the specified DLA Distribution facility in New Cumberland, Pennsylvania, with no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, supplemented by MIL-STD-129 for marking and labeling, while adhering strictly to the DLA Master List of Technical and Quality Requirements which override any conflicting standards. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance unless otherwise directed, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major. Manufacturer compliance includes removal of government identification from non-accepted supplies and proper bare item marking under RQ011 and RQ017, with palletization requiring adherence to RP001. The unit of issue is each (EA), and all documentation aligns with DoD procedures, including transportation guidelines C19 and C20. The contract is managed by Hien-Van Trinh at DLA, with the solicitation issued July 30, 2026, and responses due August 7, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

DOUBLER ASSY, AIRCRA

Solicitation # SPE4A5-26-T-316U

The contract specifies the procurement of a Doubler Assembly for aircraft, identified by part number 449-010-101-109 and NSN 1680015763930, with a quantity of two units to be delivered FOB origin within 432 days to the designated receiving warehouse in Tracy, California. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, while also adhering to MIL-STD-1916 or an equivalent zero-based sampling plan for inspection with zero non-conformances required unless otherwise specified. Configuration changes require formal engineering change proposals or variance requests, and the item is designated as a critical application item with mandatory physical identification and bare item marking per RQ017. The contractor must comply with CMMC Level 2 Cybersecurity Self-Assessment and provide documentation for source approval per RC001, with measuring and test equipment subject to RT001 controls. The unit of issue is each, with no tolerance in quantity variance, and delivery is targeted for October 14, 2027. All supplies must be labeled and packed as required, with government identification removed from non-accepted items per RQ011, and the contract incorporates all referenced technical requirements with revisions controlled by the solicitation or award date depending on acquisition size.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-3658

The contract covers the supply of two HEAD, PISTON units with part number 4-3008-05 and NSN 1650-01-215-6832, procured from TACTAIR FLUID CONTROLS INC under solicitation SPE4A7-26-T-3658. Delivery is required within 168 days from the order date, with a firm delivery deadline of May 12, 2027, and the items must be shipped FOB origin. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951; packaging must conform to MIL-STD-129 and RP001 packaging directives, and palletization must adhere to DLA-specific guidelines. Inspection and acceptance occur at origin, with zero tolerance for non-conformances unless otherwise specified, and sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan. The item is designated as a critical application component, requiring stringent quality controls and documentation for source approval. Cybersecurity compliance under CMMC Level 2 is mandatory, and all government identification must be removed from non-accepted items. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with no variance allowed in quantity. The unit of issue is each (EA), priced at $2.00 per unit for a total of $4.00. All technical, quality, and packaging specifications referenced by R or I numbers are governed by the DLA Master List in effect at the time of solicitation, and the supplier is subject to verification of measuring and test equipment compliance and full documentation of quality assurance processes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

RIB, STIFFENER, AIRCRAFT

Solicitation # SPE4A7-26-Q-0940

The contract pertains to the procurement of eight RIB, STIFFENER, AIRCRAFT items with NSN 1560-01-605-7042 under solicitation SPE4A7-26-Q-0940, with a delivery requirement of 150 days after award. The solicitation is governed by a suite of technical and quality requirements referenced from the DLA Master List, including compliance with Cybersecurity Maturity Model Certification Level 2 as a certified third-party assessment organization, physical identification and bare item marking standards, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Configuration change management, inspection and acceptance at origin, and removal of government identification from non-accepted supplies are mandatory, with documentation requirements for source approval requests also enforced. Export control regulations under ITAR or EAR strictly apply to the technical data associated with this item, prohibiting any disclosure or export—including to foreign nationals within the United States—without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from the DLA controlling authority. Packaging must comply with DLA standards, and the contract is subject to the revision of the DLA Master List applicable at the solicitation issue date. The primary point of contact is April Reed, and all responses must be submitted by August 11, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SHIPPING AND STORAG

Solicitation # SPE8ED-26-T-1203

This contract pertains to the procurement of a single unit of material identified by NSN 8145-01-128-1857 and part number 145G0023-1, supplied by Container Research Corporation under the authorized source designation and approved by The Boeing Company. Delivery is required within five days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the origin, and the item must be packaged in strict accordance with ASTM D3951, with all DLA Master List of Technical and Quality Requirements taking precedence. Marking and labeling must comply with MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated government delivery point at Corpus Christi, Texas, under shipment identifier RDD 777 and project code TP 1. The item falls under a Total Small Business Set-Aside and is governed by the solicitation SPE8ED-26-T-1203, with a response deadline of August 10, 2026, and an original required delivery date of July 31, 2026. All technical and quality specifications referenced through R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which supersede any general industry standards unless explicitly overridden by contract clauses. Packaging unit of issue and quantity per unit pack are strictly defined, and the contract explicitly prohibits the use of improper shipping methods. The point of contact for inquiries is Ogden Howard, with official government use codes and logistics identifiers embedded for tracking and compliance purposes.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

FAIRING ASSY, AIRCRA

Solicitation # SPE4A5-26-T-316L

The contract pertains to the procurement of a fairing assembly for aircraft, identified by part number 901-031-795-180 and NSN 1680-01-562-5202, with a quantity of two units required. Delivery is due within 695 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The item does not have a shelf life requirement, and unit identification is not mandated per customer request, though all packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA packaging guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, where revisions in effect on the solicitation or award date control compliance. The supplier must meet CMMC Level 2 self-assessment standards and adhere to ISO 9001:2015 quality systems, and sampling for inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified. Critical attributes are assigned verification levels or AQLs, and unspecified attributes default to major. All documentation for source approval, cybersecurity, and packaging must align with DLA directives, and the delivery address is DLA Distribution Cherry Point, North Carolina. The contract was issued under solicitation SPE4A5-26-T-316L with a response deadline of August 7, 2026, and is managed by the Department of Defense’s ASC Supplier Operations OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BRACKET, STRUCTURAL COM

Solicitation # SPE4A7-26-T-604L

The contract pertains to the procurement of two structural bracket components for aircraft, identified by part number L20500-14 and NSN 1560017141898, supplied by AIRGLAS, INC. Delivery is required within 390 days, with FOB origin terms, and inspection and acceptance occur at the manufacturer’s facility. The quantity is fixed at two units with zero variance allowed. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and unit containers, with marking adhering strictly to MIL-STD-129 without special codes. The item is designated as a critical application component, and while unique item identification is not required per customer request, all other quality and documentation controls remain in force. Technical and quality requirements are governed by the DLA Master List referenced in the contract, with inspection sampling governed by MIL-STD-1916 or equivalent zero-defect standards unless otherwise specified, assigning verification levels for critical, major, and minor attributes. The contract enforces stringent compliance with defense information handling, tailored quality requirements for manufacturers, and removal protocols for non-accepted supplies. Measuring and test equipment must meet specified standards, and transportation logistics are directed via DLAD Proc Notes C19 and C20. Delivery is to the designated DLA warehouse in Tracy, California, with the original and need ship date set for September 2, 2027. The solicitation was issued under contract number SPE4A7-26-T-604L, with a response deadline of August 7, 2026, and falls under NAICS code 336413 for aircraft parts manufacturing. All documentation, sourcing approvals, and quality assurances are subject to DLA’s authoritative guidelines, and the point of contact for procurement inquiries is Ariana Burnett.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CABLE, ASSEMBLY, AIRC

Solicitation # SPE4A5-26-T-316A

The contract pertains to the procurement of one aircraft cable assembly with part number 449-071-035-129 and NSN 1680-01-524-0817, issued under solicitation SPE4A5-26-T-316A by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 543 days, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The unit of issue is each, with no variance permitted in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must follow DLA’s packaging requirements, with all markings and labeling adhering explicitly to these standards. The DLA Master List of Technical and Quality Requirements governs all technical, quality, and packaging specifications and supersedes any conflicting standards. This item is designated a critical application item and is subject to stringent quality controls, including zero-defect sampling under MIL-STD-1916 or ASQ H1331 with assigned verification levels or AQLs for critical, major, and minor attributes. The manufacturer must adhere to tailored higher-level quality requirements and implement physical identification per RQ017, including bare item marking. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and source approval documentation must be submitted per RC001. Measuring and test equipment must be calibrated and validated. All government identification must be removed from non-accepted supplies. The delivery must be completed by February 2, 2028, and all shipments must follow DLA transportation guidelines C19 and C20. The point of contact for inquiries is Kay Bates, with the contract managed under a federal procurement framework using authorized DoD units of issue.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

HINGE, AIRCRAFT

Solicitation # SPE4A7-26-T-601Y

The contract pertains to a single aircraft hinge item, identified by NSN 1560-01-734-3249 and part number 7016918378, with a delivery requirement of one unit within 20 days from award, shipped FOB origin. The item is classified as a commercial item and is designated as critical due to its application in aviation systems, necessitating compliance with Federal Aviation Administration (FAA) airworthiness approval requirements and specific marking standards under FAA Bare Item Marking Requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions tied to the solicitation or award date depending on acquisition size. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 using zero-based acceptance criteria, with verification levels assigned to critical, major, and minor attributes. The contractor is required to retain full supply chain traceability documentation as per DLA Directive Procurement Note C03 (August 2016) and package the item in strict accordance with MIL-STD-2073-1E and MIL-STD-129 for marking, using non-wood packaging materials and approved procedures. Delivery must be made via the fastest traceable freight method to McConnell Air Force Base, Kansas, with shipment prohibited via parcel post. The item is subject to final inspection and acceptance at the destination point, with no quantity variance permitted. All documentation must align with the referenced Technical Data Package Revision B and Contract Data Requirements List CDRL-FAACERTCOM-25015, effective January 14, 2025.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

FAIRING, AIRCRAFT

Solicitation # SPE4A6-26-T-10NN

The contract is for the procurement of two aircraft fairings with part number 842-349546-75 and NSN 1560017141465, issued under solicitation SPE4A6-26-T-10NN by the Department of Defense’s ASC Commodities Division. Delivery is required in 374 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and zero tolerance for quantity variance. The item is designated as a critical application part and must comply with stringent quality and technical requirements referenced from the DLA Master List, including adherence to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances unless otherwise specified. The product must meet FAA airworthiness approval standards under RQ019 and be marked per FAA Bare Item Marking Requirements and MIL-STD-129, with packaging governed by MIL-STD-2073-1E and DLA packaging directives. Supply chain traceability documentation must be retained per DLAD Procurement Note C03, while configuration change management and deviation requests are subject to formal engineering change proposal procedures. The item does not require Unique Item Identification as per customer request, but a Certificate of Airworthiness and Conformance must be provided for FAA-certified parts. The contractor must maintain cybersecurity compliance through CMMC Level 2 self-assessment and follow all preservation, packing, and marking standards outlined in applicable DLA and FAA directives. Pricing is set at $2.00 per unit, with total contract value of $4.00, and the required delivery date is August 17, 2027.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Small Business Subcontracting Participation (Opportunity for DBE/MBE/WBE)This opportunity is designed to facilitate participation by certified small businesses, including 8(a), HUBZone, WOSB, and SDVOSB entities, in supply, packaging, and quality assurance roles under a prime contractor’s FAR 52.219-9 subcontracting plan. The solicitation targets organizations eligible for small business set-asides and aims to integrate them into the supply chain for defense-related activities managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The North American Industry Classification System code 334332 indicates the focus is on electronic component and board manufacturing, suggesting subcontracting needs related to production, testing, and logistics support within this sector. The deadline for responses is August 31, 2026, with the opportunity posted on July 31, 2026, allowing prospective bidders a one-month window to prepare and submit their proposals. While no specific place of performance or point of contact is listed, the contract is accessible through the DIBBS portal, and participation is contingent upon meeting certified small business status and aligning with the prime contractor’s subcontracting goals. There is no mention of a monetary value or specific contract duration, but the structure implies a framework for ongoing or long-term subcontracting engagement rather than a single project. Certified firms are encouraged to engage through the provided link to secure a role in this defense supply chain initiative.

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Quality Assurance and Inspection Services (Sub-tier Support)The contract entails providing independent quality assurance and inspection services as a sub-tier support to ensure compliance with DLA and MIL-STD standards across multiple stages of manufacturing and delivery. Key responsibilities include conducting first article inspections to validate initial production samples, performing in-process checks to maintain consistent quality during production, and executing final acceptance testing to confirm that end products meet all technical and performance specifications. Additionally, the contractor is required to review all associated documentation for accuracy and completeness and to systematically track, report, and manage non-conformances to ensure timely resolution and prevent recurrence. The work must be executed with precision and adherence to federal defense procurement standards, ensuring that all deliverables are traceable, auditable, and fully compliant with applicable military specifications. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details and point of contact information are not provided, performance is expected to align with the needs of the defense supply chain, likely involving coordination with prime contractors and defense manufacturing facilities. Participation requires demonstrated expertise in military quality systems and the ability to operate independently within a highly regulated environment, ensuring that all inspection and assurance activities support mission-critical defense outcomes.

Engineering Services

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Specialized Packaging and Marking ServicesThe contract involves specialized packaging and marking services for finished cable assemblies, requiring strict adherence to MIL-STD-2073-1E for packaging standards and MIL-STD-129 for labeling requirements. All packaging must include barcodes, CAGE codes, lot and serial numbers, and proper FOB origin coordination to ensure full compliance with military logistics protocols. The work is classified as a subcontract under NAICS code 493190 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a response deadline of August 31, 2026, and performance will be conducted in accordance with federal defense supply chain expectations, though specific performance location details are not provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline.

Other Warehousing and Storage

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Wire Rope and Cable Conduit SupplyThe contract specifies the supply of high-strength, naturally coiling wire rope and protective conduit engineered to endure a minimum tension of 552 lbs, ensuring durability and reliability under demanding operational conditions. All components must comply with MIL-STD-2073-1E packaging standards, guaranteeing secure, standardized handling, storage, and transportation throughout the supply chain. The work is classified as a subcontract under NAICS code 332420, indicating the manufacturing of wire and cable, and is issued by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, allowing interested parties sufficient time to prepare and submit proposals. Performance location and point of contact details are not specified, and the procurement is accessible via the DIBBS platform for further information and submissions.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Precision Connector and Receptacle SupplyThe contract calls for the supply of high-reliability, MIL-SPEC compliant electrical connectors and receptacles equipped with protective caps, intended for integration into control cable assemblies. All components must be certified as free from counterfeit parts and must adhere strictly to military specification standards to ensure performance under demanding operational conditions. The products are critical to defense systems requiring robust electrical connectivity and must be manufactured with traceable materials and processes to maintain integrity throughout the supply chain. This is a subcontract opportunity issued under NAICS code 334332 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The requirement emphasizes compliance with defense-grade quality controls and demands rigorous documentation to verify conformance to specifications. While the place of performance and point of contact details are unspecified, the procurement is managed through the DIBBS system, indicating formal defense procurement protocols are in effect. Suppliers must demonstrate proven capability in producing MIL-SPEC components and maintaining strict anti-counterfeit measures to qualify.

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Cable Assembly Manufacturing and TestingThe contract calls for the full production of control cable assemblies designated as P/N 2600930-001, encompassing all manufacturing steps from wire rope coiling to the secure attachment of connectors, followed by rigorous tension testing at 552 pounds and final inspection. All work must strictly adhere to MIL-STD-1916 and ASQ H1331 quality standards, with an absolute requirement of zero non-conformance tolerance across the entire production batch. This is a subcontract within the Department of Defense procurement framework under NAICS code 335931, initiated by the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026, and the solicitation posted on July 31, 2026. Production and delivery must meet exacting military specifications to ensure reliability and performance under operational conditions.

Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Packaging, Marking, and Logistics for DeliveryThe contract requires the packaging and marking of wing panels in strict accordance with MIL-STD-129 standards, ensuring all items are properly labeled with 2D Data Matrix barcodes and clearly identified by NSN and part number. Logistics preparation must align with FOB Origin and Destination requirements to facilitate seamless delivery and tracking throughout the supply chain. The work is categorized as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 493190 indicates the work falls under Other Transportation Support Activities, reflecting the focus on logistics and packaging support rather than manufacturing. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV with a response deadline of August 28, 2026, and was posted on July 31, 2026, providing interested parties approximately four weeks to prepare and submit proposals.

Other Warehousing and Storage

POSTED

about 2 hours ago

DEADLINE

Government First Article Testing (FAT) SupportThis contract supports Government-conducted Factory Acceptance Testing for up to two units, requiring the contractor to ensure full site access, provide comprehensive documentation, and deliver test-ready units ready for evaluation. The effort is tied to the Government’s First Article Testing process and demands coordination to meet all technical and procedural requirements necessary for successful FAT execution. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The North American Industry Classification System code 541330 designates the scope as engineering services, aligning with technical support and testing services for defense-related systems. The contract was posted on July 31, 2026, with a response deadline of August 28, 2026, and is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, indicating potential flexibility or site-specific arrangements to be determined post-award.

Engineering Services

POSTED

about 2 hours ago

DEADLINE

Unable to Retrieve Subcontract OpportunitiesA system error prevented the retrieval of subcontractor and supplier opportunities associated with the prime contract, making it impossible to break down actionable sub-opportunities. The solicitation, posted on July 31, 2026, with a response deadline of August 31, 2026, is categorized as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. No solicitation number, NAICS code, set-aside details, organizational type, or physical address information is available, and the point of contact is undefined. The place of performance and other location data are also omitted, leaving critical details incomplete. The only identifiable reference is the online link to the DIBBS portal where the original posting exists, but without sufficient data to evaluate or pursue potential sub-contracting avenues.

POSTED

about 2 hours ago

DEADLINE

in about 1 month

High-Reliability Component Supply (Item 0001-S00000061)The contract entails the supply of a high-reliability component designated as Item Number 0001-S00000061, with stringent requirements for quality assurance, comprehensive documentation, and full compliance with military standards. The component must meet exacting technical and performance specifications to ensure operational readiness and durability under demanding conditions, typical of defense applications. All deliverables must be accompanied by certified test reports, material certifications, and traceability records to validate conformance to applicable military and industry specifications. This is a subcontract awarded under the NAICS code 332999, classified as an Other Miscellaneous Manufacturing category, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a firm response deadline of August 31, 2026, allowing suppliers a one-month window to submit proposals. The place of performance and specific point of contact details are not provided, but the contract is accessible through the DIBBS system at the specified URL, and all offerors are expected to adhere to federal procurement regulations and defense-specific supply chain protocols without set-aside restrictions.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Specialized Component Procurement (Item 0001-S00000052)The contract solicits the procurement and delivery of a specialized component identified as Item Number 0001-S00000052, with strict requirements for traceability and full compliance with defense specifications. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, and the work must be performed in accordance with the rigorous standards expected for defense-related components. The procurement is open for response until August 31, 2026, and the component must be delivered to the designated destination as specified in the contract terms. All submitted proposals must demonstrate adherence to applicable defense regulations, including documentation of material sourcing and manufacturing processes to ensure end-to-end accountability. The NAICS code 332999 indicates the category covers other fabricated metal product manufacturing, aligning with the nature of this specialized part. The solicitation is accessible through the DIBBS portal, and bidders are expected to meet all technical, compliance, and delivery obligations without deviation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month