Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

CONTRACTORS MANAGEMENT INC

UEI: EGSWF6733KB6

CONTRACTORS MANAGEMENT INC is a federal contractor, registered under UEI EGSWF6733KB6. It has been awarded $944,840 across 17 federal contracts. Primary work spans Commercial and Institutional Building Construction, Plumbing, Heating, and Air-Conditioning Contractors, and Electrical Contractors and Other Wiring Installation Contractors. Top awarding agencies include General Services Administration (gsa), General Services Administration, and Department Of Defense.

Contact Information

Registration and classification details

Registration

UEI Code

EGSWF6733KB6

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

General Services Administration (gsa)$878.7K93%

General Services Administration$57.8K6.1%

Department Of Defense$8.3K0.9%

Awards by NAICS

236220 - Commercial and Institutional Building Construction$881.0K93.3%

238220 - Plumbing, Heating, and Air-Conditioning Contractors$33.6K3.6%

238210 - Electrical Contractors and Other Wiring Installation Contractors$18.6K2%

238350 - Finish Carpentry Contractors$5.9K0.6%

Others - Other NAICS codes (2 codes, <0.5% each)$5.7K0.6%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in CONTRACTORS MANAGEMENT INC's top NAICS codes and agencies

Infrastructure - Invitation to Bid - Spence Steam regulator replacement

Solicitation # AB-2026-05515

Alberta Infrastructure is seeking bids for the supply and installation of two new Spence steam regulators through solicitation AB-2026-05515, managed by BGIS. The project involves replacing existing steam regulators at a location in Alberta, with all work to be performed on-site. The solicitation was posted on August 5, 2026, and responses are due by August 26, 2026, at 8:00 PM Mountain Time. Kelly Wambold, Operations Manager at BGIS, is the primary point of contact for inquiries, reachable via email at kelly.wambold@bgis.com. The contract requires qualified vendors to provide compliant equipment and skilled installation services meeting provincial infrastructure standards. Bidders must ensure all technical, safety, and scheduling requirements are met to successfully execute the replacement in a timely and regulatory-compliant manner.

POSTED

about 6 hours ago

DEADLINE

Northern Alberta Institute of Technology (NAIT) - Invitation to Bid - D. Building Domestic Hot Water Heater Replacement

Solicitation # AB-2026-05513

The Northern Alberta Institute of Technology is seeking bids for the replacement of domestic hot water heaters in its D Building, under solicitation number AB-2026-05513, with bids due by August 18, 2026. The project requires a qualified mechanical contractor to remove existing equipment and install new domestic hot water heating systems, ensuring compliance with all relevant codes and operational standards. Work must be conducted with minimal disruption to campus activities, and the contractor is expected to manage all logistics, permitting, and site cleanup. The contract is open to all qualified bidders without set-aside restrictions, and all submissions must be received by the deadline. Primary point of contact for inquiries is Marek Holpit, Senior Supply Chain Strategic Consultant, reachable via email at marekh@nait.ca or phone at 780-378-2887. The project is located at NAIT’s campus in Alberta, and detailed technical specifications and bid requirements can be accessed through the official solicitation portal. Bidders are advised to review all documentation thoroughly to ensure full compliance with the scope of work and submission guidelines.

Northern Alberta Institute of Technology

POSTED

about 6 hours ago

DEADLINE

Plumbing and Piping Systems Installation

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and Wiring Services

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract is for the installation of potable water, sanitary sewer, and storm drainage systems within buildings or facilities under a subcontract arrangement set aside entirely for small businesses as defined by the SBA. It falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors and is managed by the Nuclear Reactor Program within the Department of Defense. The opportunity was posted on August 5, 2026, with responses due by August 14, 2026, and performance is required at a location in San Diego, California with a zip code of 92136-3581. All work must comply with applicable standards for municipal infrastructure systems and is intended to support critical defense facilities. The solicitation is accessible through the DIBBS platform for eligible small business contractors.

NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract under a Total Small Business Set-Aside, designated for firms certified as small businesses by the SBA, and falls under NAICS code 238210 for electrical contracting. It requires the installation of comprehensive electrical systems including wiring, conduits, panels, and lighting fixtures for commercial or infrastructure projects within the Department of Defense’s Nuclear Reactor Program. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, and the work must be performed at a specified location in San Diego, California, with a zip code of 92136-3581. All eligible small business contractors must submit proposals by the deadline to be considered for award, with performance focused on meeting the technical and safety standards required for defense-related electrical infrastructure.

NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract pertains to the installation of potable water, drainage, and gas piping systems within commercial or industrial facilities, under a subcontract classification with NAICS code 238220 for plumbing, heating, and air-conditioning contractors. The work is scoped for performance at Cherry Point, North Carolina, with a zip code of 28533-0021, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 13, 2026, leaving a limited window for potential subcontractors to submit proposals. All systems must meet stringent operational and safety standards appropriate for defense-related infrastructure, and the successful bidder will be responsible for full compliance with applicable codes and regulations governing utility installation in federal facilities.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring involves the installation of comprehensive electrical systems for commercial or infrastructure projects under a subcontract arrangement. Scope of work includes the supply and installation of conduits, wiring, electrical panels, and lighting fixtures, with performance required at Cherry Point, North Carolina, ZIP code 28533-0021. The solicitation is administered by the Defense Logistics Agency under the Department of Defense and is classified under NAICS code 238210, which corresponds to electrical contracting. The opportunity was posted on August 5, 2026, with a response deadline of August 13, 2026, providing a narrow window for interested parties to submit proposals. The contract does not specify a set-aside type and lacks detailed point of contact information, requiring potential bidders to reference the official DIBBS portal link for further submission details and technical requirements.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract involves the installation of plumbing, water supply, drainage, and HVAC piping systems under a subcontract for the Department of Defense, with the work to be performed in Tracy, California, at the ZIP code 95304-5000. The solicitation, identified by the NAICS code 238220 for plumbing, heating, and air-conditioning contractors, was posted on August 5, 2026, and responses are due by August 17, 2026. The contracting agency is listed as CONSTRUCTION & EQUIPMENT MANU & CON, indicating the project supports defense infrastructure needs. There is no specified set-aside type, and no point of contact is provided in the data, but the official solicitation details can be accessed through the provided DIBBS link. All work must comply with applicable technical and performance standards for military facility construction.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract under the NAICS code 238210, focusing on the installation of comprehensive electrical systems including conduits, wiring, outlets, and lighting fixtures. It was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is specifically located in Tracy, California, with the zip code 95304-5000. The contracting office is part of the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON, though no specific point of contact details are provided. All proposals must be submitted through the DIBBS portal via the provided link before the deadline, and the contract does not specify any set-aside type or additional sourcing restrictions.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

Checkpoint Security Grill Replacement - DBBThe Port of Seattle through its Aviation Project Management Group is forecasting a procurement under NAICS code 236220 for the full design, permitting, and construction services to replace the Checkpoint 5 security grill. The scope encompasses a comprehensive range of activities including site assessment, development of design drawings and technical specifications compliant with TSA CRPG Section 3-5, submission for regulatory review and permit acquisition, demolition and proper disposal of the existing grill, fabrication and installation of the new system, and seamless integration with existing structural, electrical, and security badge access systems. Coordination with all relevant stakeholders is required to ensure adherence to safety and operational standards while minimizing disruption to airport functions. The project is structured under a design-build-bid delivery method and is being managed by the Port of Seattle with primary contact Yanet Maldonado and project manager Collette Deardorff available for inquiries. The solicitation was posted on July 31, 2026, and while no specific award date or set-aside details are provided, the location of performance is tied to the Port of Seattle’s facilities. All work must be executed with strict attention to federal security requirements and operational continuity in a high-traffic aviation environment.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe contract involves a comprehensive renovation and structural upgrade of the Customer Service Building at the Rental Car Facility to prepare for a new concession agreement and tenant construction beginning June 1, 2027. Key improvements include updating wayfinding signage to reflect new tenant layouts, constructing a new break room and flex space to support transit operations, renovating existing restrooms, and replacing outdated car wash equipment in the Quick Turn Around areas. Structural enhancements are also required to address cracking and repair post-tension cables, along with replacing expansion joints on the fifth floor plaza areas to ensure long-term durability and safety. These modifications are designed to modernize the facility and align its infrastructure with future operational needs. The project is managed by the Port of Seattle’s Aviation Project Management Group, with official point of contact Angela Peterson and Project Manager Julia Ruzon overseeing procurement and implementation. The work falls under NAICS code 236220, indicating commercial building construction, and is forecasted with a posted date of July 31, 2026. While no solicitation number or set-aside details are provided, the scope underscores a major capital improvement initiative focused on functionality, tenant readiness, and structural integrity for a high-traffic facility serving airport operations.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 8 hours ago

DEADLINE