Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Plumbing and Piping Systems

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the installation of plumbing, water supply, drainage, and HVAC piping systems under a subcontract for the Department of Defense, with the work to be performed in Tracy, California, at the ZIP code 95304-5000. The solicitation, identified by the NAICS code 238220 for plumbing, heating, and air-conditioning contractors, was posted on August 5, 2026, and responses are due by August 17, 2026. The contracting agency is listed as CONSTRUCTION & EQUIPMENT MANU & CON, indicating the project supports defense infrastructure needs. There is no specified set-aside type, and no point of contact is provided in the data, but the official solicitation details can be accessed through the provided DIBBS link. All work must comply with applicable technical and performance standards for military facility construction.

General Info

Plumbing, water, drainage, and HVAC systems installation for DoD in Tracy, CA, due August 17, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of plumbing, water supply, drainage, and HVAC piping systems.

Similar Contracts

Same NAICS industry code

Infrastructure - Invitation to Bid - Spence Steam regulator replacement

Solicitation # AB-2026-05515

Alberta Infrastructure is seeking bids for the supply and installation of two new Spence steam regulators through solicitation AB-2026-05515, managed by BGIS. The project involves replacing existing steam regulators at a location in Alberta, with all work to be performed on-site. The solicitation was posted on August 5, 2026, and responses are due by August 26, 2026, at 8:00 PM Mountain Time. Kelly Wambold, Operations Manager at BGIS, is the primary point of contact for inquiries, reachable via email at kelly.wambold@bgis.com. The contract requires qualified vendors to provide compliant equipment and skilled installation services meeting provincial infrastructure standards. Bidders must ensure all technical, safety, and scheduling requirements are met to successfully execute the replacement in a timely and regulatory-compliant manner.

POSTED

about 6 hours ago

DEADLINE

Northern Alberta Institute of Technology (NAIT) - Invitation to Bid - D. Building Domestic Hot Water Heater Replacement

Solicitation # AB-2026-05513

The Northern Alberta Institute of Technology is seeking bids for the replacement of domestic hot water heaters in its D Building, under solicitation number AB-2026-05513, with bids due by August 18, 2026. The project requires a qualified mechanical contractor to remove existing equipment and install new domestic hot water heating systems, ensuring compliance with all relevant codes and operational standards. Work must be conducted with minimal disruption to campus activities, and the contractor is expected to manage all logistics, permitting, and site cleanup. The contract is open to all qualified bidders without set-aside restrictions, and all submissions must be received by the deadline. Primary point of contact for inquiries is Marek Holpit, Senior Supply Chain Strategic Consultant, reachable via email at marekh@nait.ca or phone at 780-378-2887. The project is located at NAIT’s campus in Alberta, and detailed technical specifications and bid requirements can be accessed through the official solicitation portal. Bidders are advised to review all documentation thoroughly to ensure full compliance with the scope of work and submission guidelines.

Northern Alberta Institute of Technology

POSTED

about 6 hours ago

DEADLINE

Plumbing and Piping Systems Installation

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract is for the installation of potable water, sanitary sewer, and storm drainage systems within buildings or facilities under a subcontract arrangement set aside entirely for small businesses as defined by the SBA. It falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors and is managed by the Nuclear Reactor Program within the Department of Defense. The opportunity was posted on August 5, 2026, with responses due by August 14, 2026, and performance is required at a location in San Diego, California with a zip code of 92136-3581. All work must comply with applicable standards for municipal infrastructure systems and is intended to support critical defense facilities. The solicitation is accessible through the DIBBS platform for eligible small business contractors.

NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Plumbing and Piping SystemsThe contract pertains to the installation of potable water, drainage, and gas piping systems within commercial or industrial facilities, under a subcontract classification with NAICS code 238220 for plumbing, heating, and air-conditioning contractors. The work is scoped for performance at Cherry Point, North Carolina, with a zip code of 28533-0021, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 13, 2026, leaving a limited window for potential subcontractors to submit proposals. All systems must meet stringent operational and safety standards appropriate for defense-related infrastructure, and the successful bidder will be responsible for full compliance with applicable codes and regulations governing utility installation in federal facilities.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This solicitation seeks qualified subcontractors to provide quarterly fire extinguisher inspection and replacement services at the Excelsior Springs Job Corps Center in Missouri, encompassing a total of 175 extinguishers across 21 campus buildings and 23 center-owned vehicles. The work requires detailed inspections four times annually, with the contractor responsible for replacing any used, partially used, or uncharged extinguishers with fully charged units, and providing inspection tags for each device. All services must comply with NFPA 101 Life Safety Code, the National Electrical Code, and applicable OSHA regulations, while adhering to all local, state, and federal construction codes. The contract term runs from October 1, 2026, through September 30, 2027, with performance subject to final acceptance by the center, requiring submission of signed punch lists, warranties, and guarantees before payment. Bidders must submit a completed Fee-For-Service Bid Sheet with a detailed cost breakdown, proof of Missouri-specific licensing, vendor paperwork including Form W-9, Vendor Acknowledgement Form, FFATA Notice, and Anti-Lobbying Certification, along with certificates of insurance covering automobile, liability, and workers compensation. Payment will be issued within 30 days of invoicing, and all deliverables are F.O.B. destination. The procurement is designated as a subcontracting opportunity under a Small Business set-aside that includes eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. Compliance with federal labor standards is mandatory, including the Service Contract Act, minimum wage requirements under Executive Order 14026, and the Davis-Bacon Act, with additional requirements for debarment certification, anti-lobbying compliance, and active SAM.gov registration with a Unique Entity ID. Bidders must conduct a site visit, submit proposals in ink or typewritten format with no erasures, and ensure all documents are received by 12 p.m. CST on August 14, 2026. The award will be based on best overall value, not lowest price, with the contracting officer serving as the sole judge of technical merit, compliance, and responsiveness. Contractors and personnel are strictly prohibited from fraternizing with students or staff and from bringing alcohol, tobacco products, drugs, or firearms onto the center premises.

ETR/Excelsior Springs Job Corps

POSTED

about 8 hours ago

DEADLINE

IE JCC HVAC Replacements

Solicitation # ie-jcc-hvac-replacements

This contract is a fixed-price, lump-sum subcontracting opportunity issued by Management & Training Corporation (MTC) on behalf of the U.S. Department of Labor for HVAC replacements at the Inland Empire Job Corps Center in San Bernardino, California. The scope includes furnishing and installing three new packaged HVAC units with gas heating, removing and disposing of existing units in compliance with EPA refrigerant recovery regulations, reconnecting and modifying gas piping and ductwork, installing new electrical disconnects and programmable thermostats, and performing comprehensive startup, testing, and commissioning that verifies critical safety functions such as the automatic closure of fresh air intake dampers during fire activation. All work must adhere to Title 24, the 2024 International Mechanical Code, the 2024 International Energy Conservation Code, and ASHRAE 90.1-2022 standards. Deliverables include manufacturer and workmanship warranties, operation and maintenance manuals, test records, disposal documentation, and completion of at least two hours of on-site training for facility personnel. The contract requires a 100-day consecutive business day performance period following receipt of a Notice to Proceed, with an onsite pre-construction meeting mandatory prior to work commencement. The solicitation is set aside exclusively for small business concerns under multiple SBA categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. Bidders must hold a valid UEI number, provide Tax ID and DUNS number, and formally represent their business classification per NAICS code 238220. All contractors and first-tier subcontractors exceeding $30,000 must disclose debarment status, and all offerors must certify they are not suspended or debarred by any federal agency. Bid requirements include a detailed cost breakdown covering materials, labor with apprenticeship documentation, equipment, permits, bonds, overhead, and profit; a signed MTC bid form; supplier packet with W-9 and terms acceptance; and mandatory site visit verification. For bids $25,000 or more, a 20% bid bond and subsequent performance and payment bonds at 100% of contract value are required, with sureties holding at least an A rating. Insurance mandates include $1 million per occurrence general liability with MTC/DOL as additional insured, $1 million auto, and $500,000 workers’ compensation. Weekly

MTC Inland Empire Job Corps

POSTED

about 8 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

The contract seeks a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—specifically, two existing Peerless gas-fired boilers in Building 1 (IOOF) and a new high-efficiency gas-fired boiler in Building 2 (Administrative/Academic). The project requires installation of boilers meeting specified output and efficiency standards: 1,680,000 B.T.U. input and 1,344,000 B.T.U. output for the IOOF boilers, and a 94% Energy Star-efficient 600,000 B.T.U. input unit for the administrative building, along with full commissioning of the boiler control systems by a qualified agent. All work must comply with the latest editions of NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, IECC, and IFGC standards, as well as Kansas state codes. Environmental and safety regulations under EPA 40CFR761, 40 CFR 61 subpart m, and OSHA 29CFR1926 must be strictly followed, and the contractor is responsible for securing all necessary local permits and maintaining current licensing. The work is governed by strict performance timelines, with a Notice to Proceed triggering a mandatory start within 14 days and total completion—including punch list items—required within 120 calendar days. Substantial completion is targeted at 60 days after notice to proceed, followed by a 30-day close-out phase, and the contractor must provide written notice at least seven days in advance to schedule a walk-through for substantial completion certification. Final acceptance requires submission of inspection reports, test results, warranties, commissioning documentation, O&M manuals, manufacturer start-up checklists, and third-party water test results. Pricing is to be submitted in a detailed format breaking down labor hours, materials, and total costs, with award determined solely on price and price-related factors after a material compliance pass/fail gate. The contractor must provide a W-9 and DUNS# with the proposal, carry liability insurance naming the Center as both certificate holder and additional insured, and adhere to strict conduct rules prohibiting fraternization, alcohol, drugs, firearms, and use of center food services. Warranties include ten years for boiler heat exchangers, two years for all other parts, one year for workmanship, and a one-year preventive maintenance agreement

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 8 hours ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract involves the repair of a hot water heater located at the Keystone Job Corps Center in Drums, Pennsylvania, specifically within the Lincoln dormitory. The equipment to be serviced is an AquaPlex Turbopower 96 model #100L400A-TPX with serial number F008076, and the repair must include replacements or servicing of key components such as the blower motor assembly, gas valve, hot surface ignitor, ignitor gasket, and electrode flame rod. The work is subject to Davis Bacon wage requirements, mandating payment of prevailing local wages and the submission of certified payroll records. All offerors must be currently registered and active in Sam.gov to be eligible. Bidders are required to clearly separate labor and material costs in their proposals, though no pricing schedule, contract value, or cost ceiling is provided. The solicitation is set aside exclusively for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, under NAICS code 238220 for plumbing and heating contractors. The place of performance is confirmed as Keystone Job Corps, Drums, PA, but the period of performance, delivery schedule, FOB terms, and evaluation criteria for award remain unspecified. No formal attachments, packaging requirements, inspection procedures, or detailed submission instructions beyond cost separation and Sam.gov registration are included in the documentation. The primary point of contact for inquiries is Jennie Drumheller, reachable via phone or email provided in the solicitation, with responses due by August 14, 2026.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 8 hours ago

DEADLINE

PCJCC HVAC Replacement Bldg Two

Solicitation # PCJCC-HVAC Replacement Bldg Two

This subcontracting opportunity, issued by Exceed Corporation LLC on behalf of the Pinellas County Job Corps Center in St. Petersburg, Florida, seeks licensed HVAC contractors to replace two outdoor condenser units—one 20-ton and one 15-ton—at Building Two of the facility located at 500 22nd Street South, FL 33712. The scope of work includes the full removal of existing condensing units CU-2-1 and CU-2-2, along with their entire refrigerant line-sets, and the recovery of R-22 refrigerant for proper recycling or offsite disposal in compliance with EPA and ASHRAE 15 guidelines. New commercial-grade split condensing units must be installed using non-ozone-depleting A2L refrigerants such as R-32 or R-454B, meeting the latest Energy Star and Federal Energy Management Product (FEMP) requirements. Additional tasks include replacing the DX cooling coil in the VAV Air Handling Unit AHU-2-2, installing new insulated refrigerant line-sets, filter dryers, refrigerant accumulators, sight glasses, thermostatic expansion valves, and NEMA 3R electrical disconnects with proper conduit and wiring. Contractors must also verify or install duct-mounted smoke detectors in accordance with NEC, NFPA 90A, and NFPA 72 standards. All work must adhere to the latest IMC, IPC, SMACNA, and NEC codes, as well as manufacturer installation specifications. Bidders are required to complete a site visit prior to submitting proposals and must provide a minimum five-year compressor warranty and a one-year parts and labor warranty. Proposals must be complete, covering installation, removal, and all ancillary costs, and must be submitted by 5 p.m. on August 7, 2026, with late submissions disqualified. The solicitation is set aside for small business concerns including small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, veteran-owned small businesses, and service-disabled veteran-owned small businesses. All respondents must be EEO compliant, and inquiries should be directed to Angelia Richardson, Finance & Administration Director, at the provided contact information.

Exceed, LLC dba Pinellas County Job Corps Center

POSTED

about 8 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026-maui-dorm-exhaust-fans

This is a subcontracting opportunity with Management & Training Corporation (MTC) for the removal and replacement of approximately 25 exhaust fans across three dormitories at the Hawaii Job Corps Center in Makawao, Hawaii. The solicitation, identified as 2026-maui-dorm-exhaust-fans, is structured as a fixed-price, single lump sum contract with a response deadline of August 28, 2026, at 3:00 PM HST, and must be submitted via email to Karllene Allen and Mila Handel at jobcorps.org. The opportunity is reserved exclusively for small business concerns under the SBA set-aside program, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business categories. Offerors must comply with NAICS code 238220 and self-certify their business classification using the provided Definitions for Small Business Categories. All bidders are required to complete and submit the MTC Supplier Packet, including a W-9, Supplier Self-Certification, and Acceptance of Terms and Conditions forms, along with a detailed cost breakout on contractor letterhead that itemizes materials, labor (with categories, hours, and rates), equipment, permits, disposal, testing, bonds, subcontractor costs, overhead, profit, and other direct or indirect expenses. Contractors must conduct a mandatory physical site visit and sign an attendance roster prior to bid submission, and are responsible for acquiring all necessary local, state, and federal permits. Bids exceeding $25,000 require a bid bond equal to 20% of the base bid, and if awarded, performance and payment bonds at 100% of the contract value from an A-rated surety company, in forms such as AIA A-311, AIA A-312, SF25, or SF25A. Insurance requirements include general liability ($1 million per occurrence, $3 million aggregate), auto liability ($1 million), workers’ compensation ($500,000), and professional liability ($1 million per occurrence, $3 million aggregate), with MTC listed as additional insured. The work must adhere to the attached wage determination and Executive Order 13658, including submission of weekly certified payroll reports and posting bilingual Davis-Bacon Act notices. Contractors must provide two complete operation and maintenance manuals, deliver two hours of on

Management & Training Corporation

POSTED

about 8 hours ago

DEADLINE

HVAC Units Replacement in 3 dormitories

Solicitation # 26-134

The contract requires the replacement of 20 HVAC units across three dormitory buildings at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically nine units at 1095 MLK, nine at 1094 RFK, and two condensing units at 1963 LBJ. All existing units are outdated, using R-22 refrigerant and manufactured by Bryant, and must be replaced with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. Installation must reuse existing electrical disconnects, ductwork, and thermostat wiring, while all removed units from 1094 and 1095 must be left at the maintenance building for disassembly and parts recovery, and any recovered refrigerant must be labeled and transferred to maintenance for reuse. The scope is governed by state and local codes, EPA and OSHA regulations, and requires compliance with Davis-Bacon Act wage determinations, including posting the Department of Labor WH-1313 poster and informing employees of minimum wage rates. Bidders must attend a mandatory bid conference to be eligible, and proposals must be submitted by August 7, 2026, at 3:00 PM to Tammy Swallows at Purchasing.Atterbury@adamsaai.com on official company letterhead, including a completed SF-1413, W9, Vendor Questionnaire with DUNS#, Small Business Certification if applicable, SAM.gov wage determination printout, proof of Indiana contractor’s license, copies of all insurance certificates, material safety data sheets, and a detailed cost breakdown for labor, materials, equipment, and incidentals. The award will be based on best value, with price weighted at 60%, quality at 20%, past performance at 10%, and schedule at 10%, and lowest price does not guarantee selection. The contract is a single lump sum, with payment terms Net 30, and work must begin within 14 days of the Notice to Proceed. Contractors must provide a substantial completion timeline, and upon work completion, a formal walk-through by the Contracting Officer or designee is required, preceded by written notice at least three days in advance. Substantial completion is defined as work complete except for minor punch list items, which must be corrected within 14 days. All workmanship is guaranteed for one year. Bidders must provide a 90

Adams & Associates, Inc.

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Supply of Fairlead Roller (NSN 3950-01-659-3754)The contract entails the supply and delivery of three Fairlead Rollers identified by National Stock Number 3950-01-659-3754, mechanical components designed for guiding cables or ropes in military maritime or heavy equipment systems. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, in accordance with FAR 19.5. The North American Industry Classification System code 332999 indicates the work falls under Other Miscellaneous Fabrication. Performance of the contract is mandated to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, providing a twelve-day window for interested parties to submit proposals. The contract is managed by the Department of Defense under the organizational designation Construction & Equipment Manu & Con, and all submissions must be made through the DIBBS platform via the provided link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Grease Gun Adapter (Hose Assembly, 21" O/A)The contract requires the manufacture, packaging, and delivery of 123 units of a precision grease gun hose adapter, specifically a 21-inch overall length hose assembly, to meet rigorous military specifications for marking, packaging, and hazardous materials labeling. All items must be produced and prepared in full compliance with defense standards, ensuring proper identification and safe handling throughout the supply chain. Delivery is FOB Origin, meaning responsibility and risk transfer to the buyer once the goods leave the supplier’s facility, with final inspection to be conducted at the destination. The solicitation is issued under the NAICS code 332999 for other fabricated metal product manufacturing and is classified as a subcontract within the Department of Defense, specifically managed by the Construction & Equipment Manu & Con organization. The place of performance is tied to Tinker Air Force Base with a ZIP code of 73145-8000, indicating the end-use location. The posting date is August 5, 2026, and responses are due by August 17, 2026. The contract is accessible via the DIBBS portal, and while no set-aside type is specified, the requirement is tightly defined with no flexibility in specification adherence expected.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Compliance and Documentation

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Centrifugal Fueling/Defueling Pumping Unit

Air and Gas Compressor Manufacturing

POSTED

about 7 hours ago

DEADLINE

Yoke, Bar T Bay Door SupplyThe contract solicits the supply of seven units of the Yoke, Bar T Bay Door, identified by NSN 1730010036169, a specialized mechanical component critical to military or industrial systems. The item must be delivered in full compliance with military shipping and marking standards to ensure proper handling, identification, and integration into operational frameworks. The solicitation is structured as a subcontract under NAICS code 332999, indicating it falls within the category of other fabricated metal product manufacturing. The contract was posted on August 5, 2026, with a response deadline of August 17, 2026, allowing potential suppliers a limited window to submit proposals. Performance of the contract is required at the facility located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting activity is under the Department of Defense through the office designated as Construction & Equipment Manu & Con, though specific contact information is not provided. All bids must be submitted through the designated DIBBS portal linked in the solicitation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Freight and Delivery Logistics (Origin to Destination)The contract is for domestic freight and delivery logistics within 167 days, involving the transportation of goods from origin to destination with full tracking, proper documentation, and processing that complies with the Defense Logistics Agency’s Web Automated Workflow system. All delivery and reporting must adhere to WAWF standards to ensure seamless integration with Department of Defense supply chain operations. The work is scoped to occur entirely within the United States, with the primary place of performance identified as New Cumberland, Pennsylvania, ZIP code 17070-5002. The contract falls under NAICS code 484220, which classifies it as general freight trucking, and is structured as a subcontract. It is issued under the Department of Defense, specifically by the Construction & Equipment Manufacture and Construction division. Interested parties must submit responses by August 17, 2026, with the solicitation posted on August 5, 2026, through the DIBBS platform for procurement tracking and management.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 7 hours ago

DEADLINE

Cybersecurity and Covered Defense Information SafeguardingThe contract requires the implementation and maintenance of cybersecurity controls to safeguard covered defense information in full compliance with NIST SP 800-171 and DFARS 252.204-7012, ensuring that all systems and processes handling sensitive government data meet stringent federal security standards. This subcontract is part of a broader Department of Defense initiative to secure information systems against cyber threats, with performance centered at NEW CUMBERLAND, PA, under NAICS code 541512 for computer systems design services. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside classification specified, indicating open competition among qualified vendors. All parties must demonstrate proven capability to apply, monitor, and continuously update security controls aligned with NIST guidelines, with accountability for protecting controlled unclassified information throughout the contract lifecycle.

Computer Systems Design Services

POSTED

about 7 hours ago

DEADLINE

Small Business Subcontracting Participation (DBE/MBE/WBE)Certified small businesses designated as DBE, MBE, or WBE are invited to engage in supply chain, logistics, and support roles under a subcontracting plan managed by a prime contractor for a Department of Defense contract. The opportunity is tied to NAICS code 336360, which pertains to the manufacturing of special purpose machinery for transportation equipment, with performance centered in New Cumberland, Pennsylvania, under the agency known as CONSTRUCTION & EQUIPMENT MANU & CON. Participation is designed to increase the involvement of certified small disadvantaged and women-owned businesses within the federal procurement ecosystem, enabling them to secure subcontracting opportunities that align with their capabilities. Interested parties must submit responses by August 17, 2026, with the solicitation posted on August 5, 2026, through the DIBBS platform for federal procurement. This initiative emphasizes inclusion and supplier diversity within the defense industrial base, offering eligible firms access to meaningful contract work without requiring them to pursue full prime contracting status.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Handling and Labeling SupportThe contract titled Hazardous Materials Handling and Labeling Support requires comprehensive identification, labeling, and documentation of hazardous materials in full compliance with OSHA Hazard Communication standards and Department of Defense regulations. This includes the accurate preparation and submission of Safety Data Sheets and standardized hazard labels to ensure regulatory adherence and personnel safety across all handled substances. The work must align with strict federal guidelines for hazard communication, maintaining precise records and up-to-date labeling systems to support safe handling, storage, and transport procedures. Performance of this subcontract is specifically tied to the location of New Cumberland with a zip code of 17070-5002, and the NAICS code 541620 indicates this falls under scientific and technical consulting services. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and it is issued under the Department of Defense through its Construction and Equipment Manufacturing and Construction division. This opportunity is structured as a subcontract and does not specify a set-aside type, meaning it is open to eligible subcontractors without preferential status, and all submissions must meet the technical and compliance requirements outlined in the associated DIBBS portal listing.

Environmental Consulting Services

POSTED

about 7 hours ago

DEADLINE

Tensioner Pulley Assembly SupplyThe contract solicits the supply of nine Tensioner Pulley Assemblies identified by NSN 3950017066278, with all units required to meet strict military packaging and marking standards to ensure compatibility with defense logistics procedures. Delivery is specified as FOB origin, meaning responsibility and risk transfer to the buyer upon shipment from the seller’s location, while inspection authority remains with the receiving party at the destination. The item falls under NAICS code 336360, classifying it within the automotive parts manufacturing sector, and the requirement is structured as a subcontract under the Department of Defense. Performance is directed to New Cumberland, Pennsylvania, with a zip code of 17070-5002, though no specific city or state details are provided for the originating agency. The solicitation was posted on August 5, 2026, and bids must be submitted by August 17, 2026. All communications and submissions are to be processed through the DIBBS platform via the provided link.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 7 hours ago

DEADLINE

Liquid Fuel Filter-Separator Supply

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Lubricator (NSN: 4930014688674)

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE