Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

CORONET MACHINERY CORP.

UEI: SLED_41AB7F48777B571C

CORONET MACHINERY CORP. is a federal contractor, registered under UEI SLED_41AB7F48777B571C. It has been awarded $4,538,598 across 11 federal contracts. Primary work spans Small Arms, Ordnance, and Ordnance Accessories Manufacturing, Motor Vehicle Transmission and Power Train Parts Manufacturing, and Hardware Manufacturing. Top awarding agencies include DLA Land And Maritime and DLA Aviation.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_41AB7F48777B571C

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

DLA Land And Maritime$4.4M96.2%

DLA Aviation$173.4K3.8%

Awards by NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories Manufacturing$4.1M90.6%

336350 - Motor Vehicle Transmission and Power Train Parts Manufacturing$221.3K4.9%

332510 - Hardware Manufacturing$123.2K2.7%

334419 - Other Electronic Component Manufacturing$50.2K1.1%

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing$33.7K0.7%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in CORONET MACHINERY CORP.'s top NAICS codes and agencies

Supply of Grooved Pulley (NSN: 3020016180023)The contract pertains to the procurement and delivery of a single grooved pulley, a mechanical component essential for belt-driven and power transmission systems, identified by the National Stock Number 3020016180023. This is a commercial off-the-shelf item requiring full compliance with manufacturing standards, appropriate packaging protocols, and FOB origin shipment terms to ensure consistency and reliability. The item must be produced and supplied under strict quality controls aligned with government specifications for defense applications, despite being a standard commercial product. The solicitation, issued under the organization LSO COMBAT VEHICLES AND ARMAMENT within the Department of Defense, was posted on August 5, 2026, with a response deadline of August 17, 2026. It is classified as a subcontract and is subject to North American Industry Classification System code 332994, which covers Other Fabricated Metal Product Manufacturing. The place of performance is designated as Fort McCoy, Wisconsin, with a zip code of 54656-5131, indicating where the item must be delivered or utilized. No set-aside provisions or special procurement categories are specified, and the contract is open for general bidding through the DLA Dibbs platform under reference number SPE7L426T5995.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPE4A6-26-R-XB62

The contract is for the procurement of 300 plain hexagon nuts, identified by NSN 5310-01-368-5549, under solicitation SPE4A6-26-R-XB62, with a firm fixed price and no tolerance for quantity variation. Delivery is required within 240 days after award, with inspection and acceptance occurring at the contractor’s origin facility. The item is classified as a Critical Safety Item and a Critical Application Item, necessitating strict adherence to quality, traceability, and documentation requirements. All suppliers must comply with SAE AS9100 higher-level quality standards, MIL-STD-1916 or equivalent zero-based sampling plans, and strict physical identification mandates per RQ017, including bare item marking with lot and serial numbers, contractor and manufacturer CAGE codes, and part number. Packaging must follow MIL-STD-2073-1E with preservation method 33, and marking of all unit packs must conform to MIL-STD-129, including 2D barcoding, and palletization must meet DLA’s RP001 requirements. No special marking is required beyond these standards. The contract includes a comprehensive set of FAR and DFARS clauses governing changes, subcontracting, labor practices, trafficking, termination, counterfeit part avoidance, electronic parts sourcing, transportation, and cybersecurity, with multiple deviations authorized under deviation 2026-00038. All waivers or deviations must be reviewed and approved by the DSC Contracting Officer. Pricing is not specified, but the total contract value is capped at $350,000 across the five-year indefinite delivery period. Payment is mandatory via WAWF, and offers must be submitted through DIBBS or by email, fax, or hard copy to the designated DLA point of contact by August 14, 2026. The award is based on a trade-off evaluation where past performance, particularly quality and delivery history captured through PPIRS-SR, is significantly more important than cost or other non-price factors. Offerors must be registered in SAM with valid UEI and CAGE codes, and while socioeconomic status is solicited, no affirmative responses are required to be completed within the solicitation itself. All technical and quality requirements are governed by the DLA Master List, and the contractor is responsible for ensuring full compliance from production through delivery, including flow-down of requirements to subcontractors

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7LX-26-U-9329

The contract specifies the procurement of a Right Hand Single Arm Mounting Bracket with NSN 5340-01-615-0030 under solicitation SPE7LX-26-U-9329, issued as a total small business set-aside under NAICS code 332510. The estimated quantity is 176 units with delivery to be made FOB origin within 116 days of order placement, though the contract operates as an indefinite-delivery, indefinite-quantity (IDIQ) instrument with no binding obligation until a specific delivery order is issued. Inspection and acceptance occur at the destination point, and compliance with military standards is mandatory: packaging must adhere to MIL-STD-2073-1E with preservation method 10 (clean and dry), while markings follow MIL-STD-129 and item identification complies with MIL-STD-130N, including permanent marking and barcoding. Sampling and inspection procedures require zero non-conformances using MIL-STD-1916 or ASQ H1331, with verification levels assigned to critical, major, and minor attributes. Hazardous materials must be labeled per 29 CFR 1910.1200 and require pre-award submission of Safety Data Sheets and a disclosure table identifying exempted substances under specific federal statutes. Payment must be processed electronically through WAWF, and the contractor is subject to a wide array of FAR and DFARS clauses covering small business representation, employment eligibility, trafficking in persons, cybersecurity safeguards, export control, and prohibitions on sourcing from certain entities. Packaging and palletization must meet DLA’s RP001 requirements, with no special marking or cushioning specified. The contract carries a maximum value of $350,000, though unit price data is not provided, and award will be made on a lowest price technically acceptable basis. The contracting officer’s representative and payment office details are not included but will be provided post-award through DD Form 1155 and DoDAAC codes.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE4A7-26-Q-0974

The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

COLLAR, PIN-RIVET

Solicitation # SPE4A6-26-T-12TU

The contract pertains to the procurement of 822 units of COLLAR, PIN-RIVET with NSN 5320-01-596-1012 and part number HL379-6, sourced from approved manufacturers including HOWMET GLOBAL FASTENING SYSTEMS INC and HI-SHEAR CORPORATION. Delivery is required FOB origin within 121 days, with no variance allowed in quantity, and inspection and acceptance must occur at the manufacturing origin in compliance with stringent quality standards. All items must adhere to MIL-STD-2073-1E packaging requirements and MIL-STD-129 marking standards, with no special marking codes applied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated. Critical threads must be gaged per SAE AS8879 Category 1 or MIL-S-7742, excluding self-locking nuts and small-diameter threads. Documentation for source approval is mandated, and all supplies must meet tailored higher-level quality requirements. Item Unique Identification is not required per Service customer direction. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The contract was solicited under SPE4A6-26-T-12TU with a response deadline of August 13, 2026, and a required ship date of December 13, 2026.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-917N

This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.

LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7LX-26-U-9318

The contract is for the procurement of 631 mounting brackets, identified by NSN 5340-01-647-8723, under solicitation SPE7LX-26-U-9318, issued by the Strategic Acq Program Directorate of the Department of Defense. Delivery is required within 113 days after receipt of order, with a guaranteed minimum of 94 units and a contract ceiling of $350,000. The contract is structured as an indefinite-delivery, indefinite-quantity (IDIQ) vehicle, meaning orders will be issued during a one-year period following award, with performance dictated by individual delivery orders. FOB origin applies, placing delivery responsibility on the contractor to the origin point, while inspection and acceptance occur at the destination under government oversight governed by FAR 52.246-2. Packaging must comply with RP001 DLA requirements, ASTM D3951 for non-hazardous items, and FED-STD-313 for hazardous materials, with labeling conforming to MIL-STD-129 and 29 CFR 1910.1200. Hazardous materials require pre-award submission of hazard labels and safety data sheets, and foreign-flag vessel use for ocean transport is prohibited unless a waiver is obtained at least 45 days in advance. The contract incorporates numerous FAR and DFARS clauses, including mandatory cybersecurity provisions such as 252.204-7012 for safeguarding covered defense information and 252.240-7997 requiring NIST SP 800-171 compliance for protecting controlled unclassified information on contractor systems. Additional clauses enforce compliance with export controls, prohibitions on hexavalent chromium and communist Chinese military company products, whistleblower rights disclosures, and electronic invoicing through WAWF. The contractor must also adhere to levies on payments for outstanding debts, subcontracting transparency for commercial items, and pricing methodologies for modifications. All technical and quality requirements are tied to the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. Offerors must submit electronic responses via DIBBS by August 20, 2026, and are required to complete mandatory representations regarding small business status, UEI, and compliance with defense information handling standards, though no offeror-specific certifications are present in the solicitation

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9330

The contract is for the procurement of 180 units of CRANK, HAND with NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Defense Logistics Agency through an Indefinite-Delivery Contract (IDC) with a maximum value of $350,000. The estimated annual quantity is non-binding, and the guaranteed minimum is 27 units. Delivery is FOB Origin with a 76-day delivery window after order placement, and the final delivery destination is within the Continental United States under DLA Direct CONUS coverage. Inspection and acceptance occur at the destination point by the Government. Packaging must adhere to DLA’s RP001 packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous items packaged per ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Hazardous materials must comply with TQ IP025, and all packaging must reflect the specified QUP of 001. Bar-coding follows MIL-STD-129 standards, and radioactive materials exceeding 0.002 microcuries per gram or 0.01 microcuries per item require explicit labeling per the same standard. Safety Data Sheets are mandatory for hazardous materials, and all labeling must comply with 29 CFR 1910.1200. The contract mandates full compliance with cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012, including 72-hour reporting of cyber incidents, and flow-down requirements to subcontractors. Contractors must use E-Verify for employment eligibility, maintain anti-trafficking compliance programs, and avoid use of prohibited telecommunications equipment from suppliers like Huawei, ZTE, Hikvision, or Dahua. All submissions must be made electronically via the DLA Internet Bid Board System (DIBBS) by August 20, 2026, with invoicing handled exclusively through Wide Area WorkFlow. Offerors must disclose their Unique Entity Identifier and CAGE code, represent their small business status and socioeconomic certifications, and provide UEIs for joint venture partners if applicable. The contract includes clauses governing unenforceable obligations, accelerated payments to small business subcontractors, sustainable products, and prohibition of unauthorized obligations,

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPEFA3-26-Q-0054

The contract pertains to the procurement of 8 units of a lever designated as FPC with part number 70209-21221-113 and NSN 1560-LLQJ59653, under solicitation SPEFA3-26-Q-0054, issued by the DLA Fleet Readiness Center Southeast. The contract specifies a firm fixed price with no variance allowed in quantity, requiring delivery within 30 days after award at destination with inspection and acceptance also occurring at the destination. The item is to be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and unit of issue and packaging quantity must match contract specifications. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery address for freight shipping and parcel post is specified as the Fleet Readiness Center Southeast in Jacksonville, Florida, with the required delivery date set for August 4, 2026.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 6 hours ago

DEADLINE

WIRING HARNESS, BRAN

Solicitation # SPE4A6-26-T-12UF

The contract pertains to the procurement of a single unit of a branched wiring harness identified by NSN 6150-00-394-4934 under solicitation SPE4A6-26-T-12UF, with a delivery requirement of 58 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes classified as critical, major, or minor corresponding to specific verification levels or AQLs. All technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorization from the Department of State or Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and DLA authorization may access such data. The contract is issued by the Department of Defense’s ASC Commodities Division with performance at New Cumberland, Pennsylvania, and all inquiries should be directed to the primary point of contact, Alliyah Richmond.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9327

The contract is a Simplified Indefinite-Delivery Contract (SIDC) issued under solicitation SPE7LX-26-U-9327 by the Department of Defense’s Strategic Acquisition Program Directorate, specifically for the supply of CLAMP, LOOP items identified by NSN 5340-01-485-6847, with a total quantity of 2,082 each. The contract is structured as a total small business set-aside under NAICS code 332510, with a maximum contract value of $350,000 and a guaranteed minimum order of 312 units. Deliveries must be completed within 116 days of each order’s effective date, with FOB origin terms placing transportation responsibility and risk on the government after shipment from the contractor’s facility. All deliveries occur within the continental United States, and orders must be issued within one year of contract award. The contract incorporates extensive technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override commercial standards unless explicitly superseded, and mandates full compliance with MIL-STD-129 for packaging, marking, and labeling, including hazardous material handling per FED-STD-313 and 29 CFR 1910.1200. Packaging must also adhere to RP001 for palletization and ASTM D3951 for non-hazardous items, with barcoding required for logistics tracking. Inspection and acceptance occur at destination under FAR 52.246-2, and invoicing must be submitted electronically through WAWF. The contractor must affirm small business status and comply with extensive DFARS clauses addressing whistleblower rights, conflicts of interest involving former DoD officials, data handling, cybersecurity (NIST SP 800-171), trafficking in persons, employment eligibility, sustainable procurement, hazardous materials, and prohibition of foreign telecommunications equipment from specific Chinese entities. Special contractual provisions include unilateral contract formation through acceptance of the first order, mandatory disclosure of UEI and CAGE codes if offering covered defense equipment, and strict controls on the use and disclosure of government work products and controlled information. Proposal submissions are exclusively required via DIBBS by August 20, 2026, with no paper submissions permitted.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-617P

The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

SCREW, CAP, SOCKET HE

Solicitation # SPE4A6-26-T-12TP

The contract specifies the procurement of 65 socket head cap screws identified by NSN 5305-01-660-8339 and part number NAS1352-8-LN-28, manufactured to the current revision of the non-government standard NAS1352 Revision 13 dated 05/31/2016. All hardware must comply with this standard, and previously approved revisions are acceptable only for items manufactured before the solicitation date. The item is classified as a critical application component, requiring strict adherence to physical identification and bare item marking requirements under RQ017, and must be marked in accordance with MIL-STD-129 without special marking codes. Packaging must conform to MIL-STD-2073-1E, including preservation method 33, dry conditions, and use of BV unit containers, with palletization following DLA's packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking except for specific exemptions like batteries or instruments as defined by NAVSEA, and any such exempt items must include a secondary containment. Sampling for quality verification follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. The item is delivered FOB origin with a 109-day delivery window, inspection and acceptance occurring at destination, and no variance is permitted in quantity. Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE4A6-26-T-12TT

The contract solicitation SPE4A6-26-T-12TT calls for the procurement of 276 units of a BOLT, SHEAR designated as part number NAS1304-27, manufactured in accordance with the non-government standard NAS1303 through NAS1320 Revision 13 dated January 31, 2001, and referenced to drawing 13873 EI-013653161 Revision dated July 10, 2026. The item is classified as a critical application with no shelf life requirement. All hardware must conform to the current revision of the applicable part standard, and previously manufactured items under prior revisions are acceptable only if they were produced during the time those revisions were current. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards where conflicts exist. Thread inspection for Class 3A and 3B threads must follow System 22 of FED-STD-H28/20, excluding self-locking nuts and threads smaller than .190 inch internal or .138 inch external diameter. Item identification markings must comply with paragraph 4.1.b(2) of MIL-STD-130N, including manufacturer’s logo, lot number, and material identification, but Item Unique Identification (IUID) is waived under DFARS 252.211-7003(c)(1)(i). Packaging must adhere to ASTM D3951 unless overridden by DLA requirements, with palletization following RP001 and labeling per MIL-STD-129. All shipments are to be delivered FOB Origin to DLA Distribution Depot Oklahoma at Tinker AFB, with inspection and acceptance also occurring at origin. Solicitation requires adherence to MIL-STD-1916 or ASQ H1331 Table 1 for sampling, with zero non-conformances mandated unless otherwise specified; unspecified attributes are considered major with an AQL of 1.0. A First Article Test (FAT) is required for one unit, priced at $1.00, but no award will be made if the requirement is waived. The contractor must implement a quality system compliant with SAE AS9003 or ISO 9001 tailored to AS9003 and issue a Certificate of Conformance per FAR 52.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L1-26-Q-1458

The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.

LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9307

The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

NUT, SELF-LOCKING, AS

Solicitation # SPE4A6-26-T-12UT

The contract specifies the procurement of 28 self-locking nuts with assembled washers, identified by NSN 5310-00-163-7561, under solicitation SPE4A6-26-T-12UT, with a response deadline of August 13, 2026, and a delivery requirement of 256 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date depending on acquisition size. The item is subject to strict export controls under ITAR or EAR, prohibiting any unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Quality conformance inspections, measuring equipment standards, and DLA packaging requirements are mandated, and government identification must be removed from rejected items. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization, and physical identification markings on the bare item are required. The point of contact for inquiries is Molitauoleava Langi, and performance is to occur in New Cumberland, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE